提交 faed0d59 编写于 作者: J Jagan Teki 提交者: Shawn Guo

ARM: dts: imx6dl-mamoj: Add Wifi support

Add TI WL18XX Wifi for BTicino i.MX6DL board.
Signed-off-by: NSimone CIANNI <simone.cianni@bticino.it>
Signed-off-by: NRaffaele RECALCATI <raffaele.recalcati@bticino.it>
Signed-off-by: NMichael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>
上级 ea8f1d7a
......@@ -133,6 +133,18 @@
enable-active-high;
vin-supply = <&reg_lcd_vgl>;
};
reg_wl18xx_vmmc: regulator-wl18xx-vmcc {
compatible = "regulator-fixed";
regulator-name = "vwl1807";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wlan>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&gpio6 21 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
};
};
&fec {
......@@ -285,6 +297,30 @@
status = "okay";
};
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
bus-width = <4>;
vmmc-supply = <&reg_wl18xx_vmmc>;
no-1-8-v;
non-removable;
wakeup-source;
keep-power-in-suspend;
cap-power-off-card;
max-frequency = <25000000>;
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
wlcore: wlcore@2 {
compatible = "ti,wl1837";
reg = <2>;
interrupt-parent = <&gpio6>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
tcxo-clock-frequency = <26000000>;
};
};
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
......@@ -392,6 +428,17 @@
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17069
MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10079
MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17069
MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17069
MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17069
MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17069
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
......@@ -406,4 +453,10 @@
MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
>;
};
pinctrl_wlan: wlangrp {
fsl,pins = <
MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x4001b0b0
>;
};
};
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册