ath10k: add 2ghz channel arguments to service ready structure

Add lowest/highest 2ghz channel arguments for use within WMI service
ready structure.
Signed-off-by: NTomislav Požega <pozega.tomislav@gmail.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/ath/ath10k/core.h

@@ -967,6 +967,8 @@ struct ath10k {
 	u32 num_rf_chains;
 	u32 max_spatial_stream;
 	/* protected by conf_mutex */
+	u32 low_2ghz_chan;
+	u32 high_2ghz_chan;
 	u32 low_5ghz_chan;
 	u32 high_5ghz_chan;
 	bool ani_enabled;

drivers/net/wireless/ath/ath10k/wmi-tlv.c

@@ -1207,6 +1207,8 @@ static int ath10k_wmi_tlv_op_pull_svc_rdy_ev(struct ath10k *ar,
 	arg->phy_capab = ev->phy_capability;
 	arg->num_rf_chains = ev->num_rf_chains;
 	arg->eeprom_rd = reg->eeprom_rd;
+	arg->low_2ghz_chan = reg->low_2ghz_chan;
+	arg->high_2ghz_chan = reg->high_2ghz_chan;
 	arg->low_5ghz_chan = reg->low_5ghz_chan;
 	arg->high_5ghz_chan = reg->high_5ghz_chan;
 	arg->num_mem_reqs = ev->num_mem_reqs;

drivers/net/wireless/ath/ath10k/wmi.c

@@ -5362,6 +5362,8 @@ ath10k_wmi_main_op_pull_svc_rdy_ev(struct ath10k *ar, struct sk_buff *skb,
 	arg->phy_capab = ev->phy_capability;
 	arg->num_rf_chains = ev->num_rf_chains;
 	arg->eeprom_rd = ev->hal_reg_capabilities.eeprom_rd;
+	arg->low_2ghz_chan = ev->hal_reg_capabilities.low_2ghz_chan;
+	arg->high_2ghz_chan = ev->hal_reg_capabilities.high_2ghz_chan;
 	arg->low_5ghz_chan = ev->hal_reg_capabilities.low_5ghz_chan;
 	arg->high_5ghz_chan = ev->hal_reg_capabilities.high_5ghz_chan;
 	arg->num_mem_reqs = ev->num_mem_reqs;
@@ -5400,6 +5402,8 @@ ath10k_wmi_10x_op_pull_svc_rdy_ev(struct ath10k *ar, struct sk_buff *skb,
 	arg->phy_capab = ev->phy_capability;
 	arg->num_rf_chains = ev->num_rf_chains;
 	arg->eeprom_rd = ev->hal_reg_capabilities.eeprom_rd;
+	arg->low_2ghz_chan = ev->hal_reg_capabilities.low_2ghz_chan;
+	arg->high_2ghz_chan = ev->hal_reg_capabilities.high_2ghz_chan;
 	arg->low_5ghz_chan = ev->hal_reg_capabilities.low_5ghz_chan;
 	arg->high_5ghz_chan = ev->hal_reg_capabilities.high_5ghz_chan;
 	arg->num_mem_reqs = ev->num_mem_reqs;
@@ -5454,6 +5458,8 @@ static void ath10k_wmi_event_service_ready_work(struct work_struct *work)
 	ar->phy_capability = __le32_to_cpu(arg.phy_capab);
 	ar->num_rf_chains = __le32_to_cpu(arg.num_rf_chains);
 	ar->hw_eeprom_rd = __le32_to_cpu(arg.eeprom_rd);
+	ar->low_2ghz_chan = __le32_to_cpu(arg.low_2ghz_chan);
+	ar->high_2ghz_chan = __le32_to_cpu(arg.high_2ghz_chan);
 	ar->low_5ghz_chan = __le32_to_cpu(arg.low_5ghz_chan);
 	ar->high_5ghz_chan = __le32_to_cpu(arg.high_5ghz_chan);
 

drivers/net/wireless/ath/ath10k/wmi.h

@@ -6870,6 +6870,8 @@ struct wmi_svc_rdy_ev_arg {
 	__le32 num_rf_chains;
 	__le32 eeprom_rd;
 	__le32 num_mem_reqs;
+	__le32 low_2ghz_chan;
+	__le32 high_2ghz_chan;
 	__le32 low_5ghz_chan;
 	__le32 high_5ghz_chan;
 	const __le32 *service_map;