V4L/DVB (3546): Fix Compilation after moving bttv code

- Missing a Makefile for bt8xx
- rds.h were at wrong directory, since it is a global header for an internal
  interface
- tda7432 and tda9875 were dependent from bttv.h
- bttv.h were holding i2c addresses
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/video/bt8xx/Makefile

+#
+# Makefile for the video capture/playback device drivers.
+#
+
+bttv-objs      :=      bttv-driver.o bttv-cards.o bttv-if.o \
+		       bttv-risc.o bttv-vbi.o bttv-i2c.o bttv-gpio.o \
+		       bttv-input.o
+
+obj-$(CONFIG_VIDEO_BT848) += bttv.o
+
+EXTRA_CFLAGS += -I$(src)/..
+EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/dvb-core

drivers/media/video/bt8xx/bttv-driver.c

@@ -42,7 +42,7 @@
 #include <asm/io.h>
 #include <asm/byteorder.h>
 
-#include "rds.h"
+#include <media/rds.h>
 
 
 unsigned int bttv_num;			/* number of Bt848s in use */

drivers/media/video/bt8xx/bttv.h

@@ -18,6 +18,7 @@
 #include <linux/i2c.h>
 #include <media/ir-common.h>
 #include <media/ir-kbd-i2c.h>
+#include <media/i2c-addr.h>
 
 /* ---------------------------------------------------------- */
 /* exported by bttv-cards.c                                   */
@@ -168,25 +169,6 @@
 #define BTTV_BOARD_HAUPPAUGE_IMPACTVCB     0x8f
 #define BTTV_BOARD_MACHTV_MAGICTV          0x90
 
-/* i2c address list */
-#define I2C_TSA5522        0xc2
-#define I2C_TDA7432        0x8a
-#define I2C_BT832_ALT1	   0x88
-#define I2C_BT832_ALT2	   0x8a // alternate setting
-#define I2C_TDA8425        0x82
-#define I2C_TDA9840        0x84
-#define I2C_TDA9850        0xb6 /* also used by 9855,9873 */
-#define I2C_TDA9874        0xb0 /* also used by 9875 */
-#define I2C_TDA9875        0xb0
-#define I2C_HAUPEE         0xa0
-#define I2C_STBEE          0xae
-#define I2C_VHX            0xc0
-#define I2C_MSP3400        0x80
-#define I2C_MSP3400_ALT    0x88
-#define I2C_TEA6300        0x80 /* also used by 6320 */
-#define I2C_DPL3518	   0x84
-#define I2C_TDA9887	   0x86
-
 /* more card-specific defines */
 #define PT2254_L_CHANNEL 0x10
 #define PT2254_R_CHANNEL 0x08

drivers/media/video/saa6588.c

@@ -32,7 +32,7 @@
 #include <asm/uaccess.h>
 
 
-#include "rds.h"
+#include <media/rds.h>
 
 /* Addresses to scan */
 static unsigned short normal_i2c[] = {

drivers/media/video/saa7134/saa7134-core.c

@@ -960,7 +960,7 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
 	if (saa7134_no_overlay <= 0) {
 		saa7134_video_template.type |= VID_TYPE_OVERLAY;
 	} else {
-		printk("bttv: Overlay support disabled.\n");
+		printk("%s: Overlay support disabled.\n",dev->name);
 	}
 	dev->video_dev = vdev_init(dev,&saa7134_video_template,"video");
 	err = video_register_device(dev->video_dev,VFL_TYPE_GRABBER,

drivers/media/video/tda7432.c

@@ -48,9 +48,9 @@
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
 
-#include "bttv.h"
 #include <media/audiochip.h>
 #include <media/v4l2-common.h>
+#include <media/i2c-addr.h>
 
 #ifndef VIDEO_AUDIO_BALANCE
 # define VIDEO_AUDIO_BALANCE 32

drivers/media/video/tda9875.c

@@ -30,14 +30,14 @@
 #include <linux/i2c-algo-bit.h>
 #include <linux/init.h>
 
-#include "bttv.h"
 #include <media/audiochip.h>
 
+#include <media/i2c-addr.h>
+
 static int debug; /* insmod parameter */
 module_param(debug, int, S_IRUGO | S_IWUSR);
 MODULE_LICENSE("GPL");
 
-
 /* Addresses to scan */
 static unsigned short normal_i2c[] =  {
     I2C_TDA9875 >> 1,

include/media/i2c-addr.h

+/*
+ *  V4L I2C address list
+ *
+ *
+ *  Copyright (C) 2006 Mauro Carvalho Chehab <mchehab@infradead.org>
+ *	Based on a previous mapping by
+ *		Ralph Metzler (rjkm@thp.uni-koeln.de)
+ *		Gerd Knorr <kraxel@goldbach.in-berlin.de>
+ *
+ */
+
+/* bttv address list */
+#define I2C_TSA5522        0xc2
+#define I2C_TDA7432        0x8a
+#define I2C_BT832_ALT1	   0x88
+#define I2C_BT832_ALT2	   0x8a // alternate setting
+#define I2C_TDA8425        0x82
+#define I2C_TDA9840        0x84
+#define I2C_TDA9850        0xb6 /* also used by 9855,9873 */
+#define I2C_TDA9874        0xb0 /* also used by 9875 */
+#define I2C_TDA9875        0xb0
+#define I2C_HAUPEE         0xa0
+#define I2C_STBEE          0xae
+#define I2C_VHX            0xc0
+#define I2C_MSP3400        0x80
+#define I2C_MSP3400_ALT    0x88
+#define I2C_TEA6300        0x80 /* also used by 6320 */
+#define I2C_DPL3518	   0x84
+#define I2C_TDA9887	   0x86
+

drivers/media/video/rds.h → include/media/rds.h

@@ -42,7 +42,3 @@ struct rds_command {
 #define RDS_CMD_POLL	_IOR('R',4,int)
 
 #endif
-
-
-
-