ARM: dt: tegra: remove unnecessary unit addresses

DT node names only need to include the unit address if it's required to
make the node name unique. Remove the unnecessary unit addresses.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NOlof Johansson <olof@lixom.net>

arch/arm/boot/dts/tegra-cardhu.dts

@@ -10,7 +10,7 @@
 		reg = <0x80000000 0x40000000>;
 	};
 
-	pinmux@70000000 {
+	pinmux {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
 
@@ -156,7 +156,7 @@
 		support-8bit;
 	};
 
-	ahub@70080000 {
+	ahub {
 		i2s@70080300 {
 			status = "disable";
 		};

arch/arm/boot/dts/tegra-harmony.dts

@@ -6,11 +6,11 @@
 	model = "NVIDIA Tegra2 Harmony evaluation board";
 	compatible = "nvidia,harmony", "nvidia,tegra20";
 
-	memory@0 {
+	memory {
 		reg = <0x00000000 0x40000000>;
 	};
 
-	pinmux@70000000 {
+	pinmux {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
 
@@ -234,7 +234,7 @@
 		};
 	};
 
-	pmc@7000f400 {
+	pmc {
 		nvidia,invert-interrupt;
 	};
 

arch/arm/boot/dts/tegra-paz00.dts

@@ -6,11 +6,11 @@
 	model = "Toshiba AC100 / Dynabook AZ";
 	compatible = "compal,paz00", "nvidia,tegra20";
 
-	memory@0 {
+	memory {
 		reg = <0x00000000 0x20000000>;
 	};
 
-	pinmux@70000000 {
+	pinmux {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
 
@@ -245,7 +245,7 @@
 		status = "disable";
 	};
 
-	nvec@7000c500 {
+	nvec {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "nvidia,nvec";

arch/arm/boot/dts/tegra-seaboard.dts

@@ -11,7 +11,7 @@
 		reg = <0x00000000 0x40000000>;
 	};
 
-	pinmux@70000000 {
+	pinmux {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
 
@@ -411,7 +411,7 @@
 		};
 	};
 
-	emc@7000f400 {
+	emc {
 		emc-table@190000 {
 			reg = <190000>;
 			compatible = "nvidia,tegra20-emc-table";

arch/arm/boot/dts/tegra-trimslice.dts

@@ -6,11 +6,11 @@
 	model = "Compulab TrimSlice board";
 	compatible = "compulab,trimslice", "nvidia,tegra20";
 
-	memory@0 {
+	memory {
 		reg = <0x00000000 0x40000000>;
 	};
 
-	pinmux@70000000 {
+	pinmux {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
 

arch/arm/boot/dts/tegra-ventana.dts

@@ -10,7 +10,7 @@
 		reg = <0x00000000 0x40000000>;
 	};
 
-	pinmux@70000000 {
+	pinmux {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
 

arch/arm/boot/dts/tegra20.dtsi

@@ -4,12 +4,12 @@
 	compatible = "nvidia,tegra20";
 	interrupt-parent = <&intc>;
 
-	pmc@7000f400 {
+	pmc {
 		compatible = "nvidia,tegra20-pmc";
 		reg = <0x7000e400 0x400>;
 	};
 
-	intc: interrupt-controller@50041000 {
+	intc: interrupt-controller {
 		compatible = "arm,cortex-a9-gic";
 		interrupt-controller;
 		#interrupt-cells = <3>;
@@ -23,7 +23,7 @@
 			      0 57 0x04>;
 	};
 
-	apbdma: dma@6000a000 {
+	apbdma: dma {
 		compatible = "nvidia,tegra20-apbdma";
 		reg = <0x6000a000 0x1200>;
 		interrupts = <0 104 0x04
@@ -90,12 +90,12 @@
 		nvidia,dma-request-selector = <&apbdma 1>;
 	};
 
-	das@70000c00 {
+	das {
 		compatible = "nvidia,tegra20-das";
 		reg = <0x70000c00 0x80>;
 	};
 
-	gpio: gpio@6000d000 {
+	gpio: gpio {
 		compatible = "nvidia,tegra20-gpio";
 		reg = <0x6000d000 0x1000>;
 		interrupts = <0 32 0x04
@@ -111,7 +111,7 @@
 		interrupt-controller;
 	};
 
-	pinmux: pinmux@70000000 {
+	pinmux: pinmux {
 		compatible = "nvidia,tegra20-pinmux";
 		reg = <0x70000014 0x10   /* Tri-state registers */
 		       0x70000080 0x20   /* Mux registers */
@@ -154,7 +154,7 @@
 		interrupts = <0 91 0x04>;
 	};
 
-	emc@7000f400 {
+	emc {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "nvidia,tegra20-emc";
@@ -207,7 +207,7 @@
 		phy_type = "utmi";
 	};
 
-	ahb: ahb@6000c004 {
+	ahb {
 		compatible = "nvidia,tegra20-ahb";
 		reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */
 	};

arch/arm/boot/dts/tegra30.dtsi

@@ -4,12 +4,12 @@
 	compatible = "nvidia,tegra30";
 	interrupt-parent = <&intc>;
 
-	pmc@7000f400 {
+	pmc {
 		compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc";
 		reg = <0x7000e400 0x400>;
 	};
 
-	intc: interrupt-controller@50041000 {
+	intc: interrupt-controller {
 		compatible = "arm,cortex-a9-gic";
 		interrupt-controller;
 		#interrupt-cells = <3>;
@@ -25,7 +25,7 @@
 			      0 147 0x04>;
 	};
 
-	apbdma: dma@6000a000 {
+	apbdma: dma {
 		compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma";
 		reg = <0x6000a000 0x1400>;
 		interrupts = <0 104 0x04
@@ -102,7 +102,7 @@
 		interrupts = <0 53 0x04>;
 	};
 
-	gpio: gpio@6000d000 {
+	gpio: gpio {
 		compatible = "nvidia,tegra30-gpio", "nvidia,tegra20-gpio";
 		reg = <0x6000d000 0x1000>;
 		interrupts = <0 32 0x04
@@ -178,7 +178,7 @@
 		interrupts = <0 31 0x04>;
 	};
 
-	pinmux: pinmux@70000000 {
+	pinmux: pinmux {
 		compatible = "nvidia,tegra30-pinmux";
 		reg = <0x70000868 0xd0    /* Pad control registers */
 		       0x70003000 0x3e0>; /* Mux registers */
@@ -225,7 +225,7 @@
 		};
 	};
 
-	ahb: ahb@6000c004 {
+	ahb: ahb {
 		compatible = "nvidia,tegra30-ahb";
 		reg = <0x6000c004 0x14c>; /* AHB Arbitration + Gizmo Controller */
 	};