提交 f9dc7074 编写于 作者: A Arnd Bergmann 提交者: David S. Miller

net/xgene: fix error handling during reset

The newly added reset logic uses helper functions for the MMIO that
may fail. However, when the read operation fails, we end up writing
back uninitialized data to the register, as gcc warns:

drivers/net/ethernet/apm/xgene/xgene_enet_xgmac.c: In function 'xgene_enet_link_state':
drivers/net/ethernet/apm/xgene/xgene_enet_xgmac.c:213:2: error: 'data' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/net/ethernet/apm/xgene/xgene_enet_xgmac.c:209:6: note: 'data' was declared here
  u32 data;

We already print a warning to the console log if that happens,
the best alternative that I can see is skip the rest of the reset
sequence if the register value cannot be read: Most likely the
write would fail as well, and if it succeeded, worse things could
happen.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Fixes: 3eb7cb9d ("drivers: net: xgene: XFI PCS reset when link is down")
Cc: Fushen Chen <fchen@apm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 5711a982
......@@ -155,19 +155,23 @@ static void xgene_enet_rd_mac(struct xgene_enet_pdata *pdata,
rd_addr);
}
static void xgene_enet_rd_pcs(struct xgene_enet_pdata *pdata,
static bool xgene_enet_rd_pcs(struct xgene_enet_pdata *pdata,
u32 rd_addr, u32 *rd_data)
{
void __iomem *addr, *rd, *cmd, *cmd_done;
bool success;
addr = pdata->pcs_addr + PCS_ADDR_REG_OFFSET;
rd = pdata->pcs_addr + PCS_READ_REG_OFFSET;
cmd = pdata->pcs_addr + PCS_COMMAND_REG_OFFSET;
cmd_done = pdata->pcs_addr + PCS_COMMAND_DONE_REG_OFFSET;
if (!xgene_enet_rd_indirect(addr, rd, cmd, cmd_done, rd_addr, rd_data))
success = xgene_enet_rd_indirect(addr, rd, cmd, cmd_done, rd_addr, rd_data);
if (!success)
netdev_err(pdata->ndev, "PCS read failed, addr: %04x\n",
rd_addr);
return success;
}
static int xgene_enet_ecc_init(struct xgene_enet_pdata *pdata)
......@@ -208,7 +212,9 @@ static void xgene_pcs_reset(struct xgene_enet_pdata *pdata)
{
u32 data;
xgene_enet_rd_pcs(pdata, PCS_CONTROL_1, &data);
if (!xgene_enet_rd_pcs(pdata, PCS_CONTROL_1, &data))
return;
xgene_enet_wr_pcs(pdata, PCS_CONTROL_1, data | PCS_CTRL_PCS_RST);
xgene_enet_wr_pcs(pdata, PCS_CONTROL_1, data & ~PCS_CTRL_PCS_RST);
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册