ARM: OMAP4+: Use common scratchpad SAR RAM offsets for all architectures

Choose the common scratch pad offsets, so that same offsets can work for
OMAP4 and OMAP5 devices. It simplifies code and also allows the re-use as
is on OMAP5 devices. Note that these offsets are used by low power
code for various power state management. They are not hardware register
offsets.
Signed-off-by: NTero Kristo <t-kristo@ti.com>
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>

arch/arm/mach-omap2/omap4-sar-layout.h

@@ -20,13 +20,13 @@
 #define SAR_BANK4_OFFSET		0x3000
 
 /* Scratch pad memory offsets from SAR_BANK1 */
-#define SCU_OFFSET0				0xd00
-#define SCU_OFFSET1				0xd04
-#define OMAP_TYPE_OFFSET			0xd10
-#define L2X0_SAVE_OFFSET0			0xd14
-#define L2X0_SAVE_OFFSET1			0xd18
-#define L2X0_AUXCTRL_OFFSET			0xd1c
-#define L2X0_PREFETCH_CTRL_OFFSET		0xd20
+#define SCU_OFFSET0				0xfe4
+#define SCU_OFFSET1				0xfe8
+#define OMAP_TYPE_OFFSET			0xfec
+#define L2X0_SAVE_OFFSET0			0xff0
+#define L2X0_SAVE_OFFSET1			0xff4
+#define L2X0_AUXCTRL_OFFSET			0xff8
+#define L2X0_PREFETCH_CTRL_OFFSET		0xffc
 
 /* CPUx Wakeup Non-Secure Physical Address offsets in SAR_BANK3 */
 #define CPU0_WAKEUP_NS_PA_ADDR_OFFSET		0xa04