Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 f8c0e057 编写于 作者: J Johan Hovold
浏览文件
操作

USB: serial: remove zte_ev driver 

The zte_ev driver is based on code (once) distributed by ZTE that still
appears to originally have been reverse-engineered and bolted onto the
generic driver.

A closer analysis of the zte_ev setup code reveals that it consists of
standard CDC requests (SET/GET_LINE_CODING and SET_CONTROL_LINE_STATE)
but unfortunately fails to get some of those right. In particular, as
reported by Lei Liu, it fails to lower DTR/RTS on close. It also appears
that the control requests lack the interface argument.

Since line control is already handled properly by the option driver, and
the SET/GET_LINE_CODING requests appears to be redundant (amounts to a
SET 9600 8N1) let's remove the redundant zte_ev driver.

Also move the remaining ZTE PIDs to the generic option modem driver.
Reported-by: NLei Liu <liu.lei78@zte.com.cn>
Signed-off-by: NJohan Hovold <johan@kernel.org>
上级 4b7154ba
隐藏空白更改
内联 并排
Showing with 10 addition and 315 deletion
drivers/usb/serial/Kconfig
浏览文件 @ f8c0e057
...@@ -684,14 +684,6 @@ config USB_SERIAL_WISHBONE ...@@ -684,14 +684,6 @@ config USB_SERIAL_WISHBONE
To compile this driver as a module, choose M here: the To compile this driver as a module, choose M here: the
module will be called wishbone-serial. module will be called wishbone-serial.
config USB_SERIAL_ZTE
tristate "ZTE USB serial driver"
help
Say Y here if you want to use a ZTE USB to serial device.
To compile this driver as a module, choose M here: the
module will be called zte.
config USB_SERIAL_SSU100 config USB_SERIAL_SSU100
tristate "USB Quatech SSU-100 Single Port Serial Driver" tristate "USB Quatech SSU-100 Single Port Serial Driver"
help help
......
drivers/usb/serial/Makefile
浏览文件 @ f8c0e057
...@@ -60,4 +60,3 @@ obj-$(CONFIG_USB_SERIAL_WISHBONE) += wishbone-serial.o ...@@ -60,4 +60,3 @@ obj-$(CONFIG_USB_SERIAL_WISHBONE) += wishbone-serial.o
obj-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat.o obj-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat.o
obj-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda.o obj-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda.o
obj-$(CONFIG_USB_SERIAL_XSENS_MT) += xsens_mt.o obj-$(CONFIG_USB_SERIAL_XSENS_MT) += xsens_mt.o
obj-$(CONFIG_USB_SERIAL_ZTE) += zte_ev.o
drivers/usb/serial/option.c
浏览文件 @ f8c0e057
...@@ -276,6 +276,7 @@ static void option_instat_callback(struct urb *urb); ...@@ -276,6 +276,7 @@ static void option_instat_callback(struct urb *urb);
#define ZTE_PRODUCT_MF628 0x0015 #define ZTE_PRODUCT_MF628 0x0015
#define ZTE_PRODUCT_MF626 0x0031 #define ZTE_PRODUCT_MF626 0x0031
#define ZTE_PRODUCT_AC2726 0xfff1 #define ZTE_PRODUCT_AC2726 0xfff1
#define ZTE_PRODUCT_MG880 0xfffd
#define ZTE_PRODUCT_CDMA_TECH 0xfffe #define ZTE_PRODUCT_CDMA_TECH 0xfffe
#define ZTE_PRODUCT_AC8710T 0xffff #define ZTE_PRODUCT_AC8710T 0xffff
#define ZTE_PRODUCT_MC2718 0xffe8 #define ZTE_PRODUCT_MC2718 0xffe8
...@@ -1560,7 +1561,15 @@ static const struct usb_device_id option_ids[] = { ...@@ -1560,7 +1561,15 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff92, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff92, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff93, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff93, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff94, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff94, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffec, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffee, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff6, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff7, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff8, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff9, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfffb, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfffc, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MG880, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) },
......
drivers/usb/serial/zte_ev.c 已删除 100644 → 0
浏览文件 @ 4b7154ba
/*
* ZTE_EV USB serial driver
*
* Copyright (C) 2012 Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Copyright (C) 2012 Linux Foundation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This driver is based on code found in a ZTE_ENV patch that modified
* the usb-serial generic driver. Comments were left in that I think
* show the commands used to talk to the device, but I am not sure.
*/
#include <linux/kernel.h>
#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include <linux/uaccess.h>
#define MAX_SETUP_DATA_SIZE 32
static void debug_data(struct device *dev, const char *function, int len,
const unsigned char *data, int result)
{
dev_dbg(dev, "result = %d\n", result);
if (result == len)
dev_dbg(dev, "%s - length = %d, data = %*ph\n", function,
len, len, data);
}
static int zte_ev_usb_serial_open(struct tty_struct *tty,
struct usb_serial_port *port)
{
struct usb_device *udev = port->serial->dev;
struct device *dev = &port->dev;
int result = 0;
int len;
unsigned char *buf;
buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL);
if (!buf)
return -ENOMEM;
/* send 1st ctl cmd(CTL 21 22 01 00 00 00 00 00) */
len = 0;
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0001, 0x0000, NULL, len,
USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
/* send 2st cmd and receive data */
/*
* 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 25.1.0(5)
* 16.0 DI 00 96 00 00 00 00 08
*/
len = 0x0007;
result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0x21, 0xa1,
0x0000, 0x0000, buf, len,
USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 3rd cmd */
/*
* 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 30.1.0
* 16.0 DO 80 25 00 00 00 00 08 .%..... 30.2.0
*/
len = 0x0007;
buf[0] = 0x80;
buf[1] = 0x25;
buf[2] = 0x00;
buf[3] = 0x00;
buf[4] = 0x00;
buf[5] = 0x00;
buf[6] = 0x08;
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x20, 0x21,
0x0000, 0x0000, buf, len,
USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 4th cmd */
/*
* 16.0 CTL 21 22 03 00 00 00 00 00
*/
len = 0;
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0003, 0x0000, NULL, len,
USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
/* send 5th cmd */
/*
* 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 33.1.0
* 16.0 DI 80 25 00 00 00 00 08
*/
len = 0x0007;
result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0x21, 0xa1,
0x0000, 0x0000, buf, len,
USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 6th cmd */
/*
* 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 34.1.0
* 16.0 DO 80 25 00 00 00 00 08
*/
len = 0x0007;
buf[0] = 0x80;
buf[1] = 0x25;
buf[2] = 0x00;
buf[3] = 0x00;
buf[4] = 0x00;
buf[5] = 0x00;
buf[6] = 0x08;
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x20, 0x21,
0x0000, 0x0000, buf, len,
USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
kfree(buf);
return usb_serial_generic_open(tty, port);
}
/*
* CTL 21 22 02 00 00 00 00 00 CLASS 338.1.0
*
* 16.1 DI a1 20 00 00 00 00 02 00 02 00 . ........ 340.1.0
* 16.0 CTL 21 22 03 00 00 00 00 00 CLASS 341.1.0
*
* 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 346.1.0(3)
* 16.0 DI 00 08 07 00 00 00 08 ....... 346.2.0
*
* 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 349.1.0
* 16.0 DO 00 c2 01 00 00 00 08 ....... 349.2.0
*
* 16.0 CTL 21 22 03 00 00 00 00 00 CLASS 350.1.0(2)
*
* 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 352.1.0
* 16.0 DI 00 c2 01 00 00 00 08 ....... 352.2.0
*
* 16.1 DI a1 20 00 00 00 00 02 00 02 00 . ........ 353.1.0
*
* 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 354.1.0
* 16.0 DO 00 c2 01 00 00 00 08 ....... 354.2.0
*
* 16.0 CTL 21 22 03 00 00 00 00 00
*/
static void zte_ev_usb_serial_close(struct usb_serial_port *port)
{
struct usb_device *udev = port->serial->dev;
struct device *dev = &port->dev;
int result = 0;
int len;
unsigned char *buf;
buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL);
if (!buf)
return;
/* send 1st ctl cmd(CTL 21 22 02 00 00 00 00 00) */
len = 0;
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0002, 0x0000, NULL, len,
USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
/* send 2st ctl cmd(CTL 21 22 03 00 00 00 00 00 ) */
len = 0;
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0003, 0x0000, NULL, len,
USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
/* send 3st cmd and recieve data */
/*
* 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 25.1.0(5)
* 16.0 DI 00 08 07 00 00 00 08
*/
len = 0x0007;
result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0x21, 0xa1,
0x0000, 0x0000, buf, len,
USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 4th cmd */
/*
* 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 30.1.0
* 16.0 DO 00 c2 01 00 00 00 08 .%..... 30.2.0
*/
len = 0x0007;
buf[0] = 0x00;
buf[1] = 0xc2;
buf[2] = 0x01;
buf[3] = 0x00;
buf[4] = 0x00;
buf[5] = 0x00;
buf[6] = 0x08;
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x20, 0x21,
0x0000, 0x0000, buf, len,
USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 5th cmd */
/*
* 16.0 CTL 21 22 03 00 00 00 00 00
*/
len = 0;
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0003, 0x0000, NULL, len,
USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
/* send 6th cmd */
/*
* 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 33.1.0
* 16.0 DI 00 c2 01 00 00 00 08
*/
len = 0x0007;
result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0x21, 0xa1,
0x0000, 0x0000, buf, len,
USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 7th cmd */
/*
* 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 354.1.0
* 16.0 DO 00 c2 01 00 00 00 08 ....... 354.2.0
*/
len = 0x0007;
buf[0] = 0x00;
buf[1] = 0xc2;
buf[2] = 0x01;
buf[3] = 0x00;
buf[4] = 0x00;
buf[5] = 0x00;
buf[6] = 0x08;
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x20, 0x21,
0x0000, 0x0000, buf, len,
USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 8th cmd */
/*
* 16.0 CTL 21 22 03 00 00 00 00 00
*/
len = 0;
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0003, 0x0000, NULL, len,
USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
kfree(buf);
usb_serial_generic_close(port);
}
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x19d2, 0xffec) },
{ USB_DEVICE(0x19d2, 0xffee) },
{ USB_DEVICE(0x19d2, 0xfff6) },
{ USB_DEVICE(0x19d2, 0xfff7) },
{ USB_DEVICE(0x19d2, 0xfff8) },
{ USB_DEVICE(0x19d2, 0xfff9) },
{ USB_DEVICE(0x19d2, 0xfffb) },
{ USB_DEVICE(0x19d2, 0xfffc) },
/* MG880 */
{ USB_DEVICE(0x19d2, 0xfffd) },
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
static struct usb_serial_driver zio_device = {
.driver = {
.owner = THIS_MODULE,
.name = "zte_ev",
},
.id_table = id_table,
.num_ports = 1,
.open = zte_ev_usb_serial_open,
.close = zte_ev_usb_serial_close,
};
static struct usb_serial_driver * const serial_drivers[] = {
&zio_device, NULL
};
module_usb_serial_driver(serial_drivers, id_table);
MODULE_LICENSE("GPL v2");
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或