Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 f8bded38 编写于 作者: J Joachim Eastwood 提交者： David S. Miller
浏览文件
操作

net/at91_ether: use macb access functions 

Use macb read/write funtions and remove the old at91_ether ones.
Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
上级 bc3bbef6
隐藏空白更改
内联 并排
Showing with 64 addition and 82 deletion
drivers/net/ethernet/cadence/at91_ether.c
浏览文件 @ f8bded38
......@@ -47,24 +47,6 @@
#define LINK_POLL_INTERVAL (HZ)
/* ..................................................................... */
/*
* Read from a EMAC register.
*/
static inline unsigned long at91_emac_read(struct at91_private *lp, unsigned int reg)
{
return __raw_readl(lp->emac_base + reg);
}
/*
* Write to a EMAC register.
*/
static inline void at91_emac_write(struct at91_private *lp, unsigned int reg, unsigned long value)
{
__raw_writel(value, lp->emac_base + reg);
}
/* ........................... PHY INTERFACE ........................... */
/*
......@@ -76,8 +58,8 @@ static void enable_mdi(struct at91_private *lp)
{
unsigned long ctl;
ctl = at91_emac_read(lp, MACB_NCR);
at91_emac_write(lp, MACB_NCR, ctl | MACB_BIT(MPE)); /* enable management port */
ctl = macb_readl(lp, NCR);
macb_writel(lp, NCR, ctl | MACB_BIT(MPE)); /* enable management port */
}
/*
......@@ -87,8 +69,8 @@ static void disable_mdi(struct at91_private *lp)
{
unsigned long ctl;
ctl = at91_emac_read(lp, MACB_NCR);
at91_emac_write(lp, MACB_NCR, ctl & ~MACB_BIT(MPE)); /* disable management port */
ctl = macb_readl(lp, NCR);
macb_writel(lp, NCR, ctl & ~MACB_BIT(MPE)); /* disable management port */
}
/*
......@@ -98,7 +80,7 @@ static inline void at91_phy_wait(struct at91_private *lp)
{
unsigned long timeout = jiffies + 2;
while (!(at91_emac_read(lp, MACB_NSR) & MACB_BIT(IDLE))) {
while (!(macb_readl(lp, NSR) & MACB_BIT(IDLE))) {
if (time_after(jiffies, timeout)) {
printk("at91_ether: MIO timeout\n");
break;
......@@ -113,7 +95,7 @@ static inline void at91_phy_wait(struct at91_private *lp)
*/
static void write_phy(struct at91_private *lp, unsigned char phy_addr, unsigned char address, unsigned int value)
{
at91_emac_write(lp, MACB_MAN, MACB_BF(SOF, MACB_MAN_SOF) | MACB_BF(CODE, MACB_MAN_CODE)
macb_writel(lp, MAN, MACB_BF(SOF, MACB_MAN_SOF) | MACB_BF(CODE, MACB_MAN_CODE)
| MACB_BF(RW, MACB_MAN_WRITE) | ((phy_addr & 0x1f) << 23)
| (address << 18) | (value & ((1<<MACB_DATA_SIZE) - 1)));
......@@ -127,14 +109,14 @@ static void write_phy(struct at91_private *lp, unsigned char phy_addr, unsigned
*/
static void read_phy(struct at91_private *lp, unsigned char phy_addr, unsigned char address, unsigned int *value)
{
at91_emac_write(lp, MACB_MAN, MACB_BF(SOF, MACB_MAN_SOF) | MACB_BF(CODE, MACB_MAN_CODE)
macb_writel(lp, MAN, MACB_BF(SOF, MACB_MAN_SOF) | MACB_BF(CODE, MACB_MAN_CODE)
| MACB_BF(RW, MACB_MAN_READ) | ((phy_addr & 0x1f) << 23)
| (address << 18));
/* Wait until IDLE bit in Network Status register is cleared */
at91_phy_wait(lp);
*value = at91_emac_read(lp, MACB_MAN) & ((1<<MACB_DATA_SIZE) - 1);
*value = macb_readl(lp, MAN) & ((1<<MACB_DATA_SIZE) - 1);
}
/* ........................... PHY MANAGEMENT .......................... */
......@@ -175,7 +157,7 @@ static void update_linkspeed(struct net_device *dev, int silent)
}
/* Update the MAC */
mac_cfg = at91_emac_read(lp, MACB_NCFGR) & ~(MACB_BIT(SPD) | MACB_BIT(FD));
mac_cfg = macb_readl(lp, NCFGR) & ~(MACB_BIT(SPD) | MACB_BIT(FD));
if (speed == SPEED_100) {
if (duplex == DUPLEX_FULL) /* 100 Full Duplex */
mac_cfg |= MACB_BIT(SPD) | MACB_BIT(FD);
......@@ -186,7 +168,7 @@ static void update_linkspeed(struct net_device *dev, int silent)
mac_cfg |= MACB_BIT(FD);
else {} /* 10 Half Duplex */
}
at91_emac_write(lp, MACB_NCFGR, mac_cfg);
macb_writel(lp, NCFGR, mac_cfg);
if (!silent)
printk(KERN_INFO "%s: Link now %i-%s\n", dev->name, speed, (duplex == DUPLEX_FULL) ? "FullDuplex" : "HalfDuplex");
......@@ -481,16 +463,16 @@ static void __init get_mac_address(struct net_device *dev)
struct at91_private *lp = netdev_priv(dev);
/* Check Specific-Address 1 */
if (unpack_mac_address(dev, at91_emac_read(lp, MACB_SA1T), at91_emac_read(lp, MACB_SA1B)))
if (unpack_mac_address(dev, macb_readl(lp, SA1T), macb_readl(lp, SA1B)))
return;
/* Check Specific-Address 2 */
if (unpack_mac_address(dev, at91_emac_read(lp, MACB_SA2T), at91_emac_read(lp, MACB_SA2B)))
if (unpack_mac_address(dev, macb_readl(lp, SA2T), macb_readl(lp, SA2B)))
return;
/* Check Specific-Address 3 */
if (unpack_mac_address(dev, at91_emac_read(lp, MACB_SA3T), at91_emac_read(lp, MACB_SA3B)))
if (unpack_mac_address(dev, macb_readl(lp, SA3T), macb_readl(lp, SA3B)))
return;
/* Check Specific-Address 4 */
if (unpack_mac_address(dev, at91_emac_read(lp, MACB_SA4T), at91_emac_read(lp, MACB_SA4B)))
if (unpack_mac_address(dev, macb_readl(lp, SA4T), macb_readl(lp, SA4B)))
return;
printk(KERN_ERR "at91_ether: Your bootloader did not configure a MAC address.\n");
......@@ -503,12 +485,12 @@ static void update_mac_address(struct net_device *dev)
{
struct at91_private *lp = netdev_priv(dev);
at91_emac_write(lp, MACB_SA1B, (dev->dev_addr[3] << 24) | (dev->dev_addr[2] << 16)
macb_writel(lp, SA1B, (dev->dev_addr[3] << 24) | (dev->dev_addr[2] << 16)
| (dev->dev_addr[1] << 8) | (dev->dev_addr[0]));
at91_emac_write(lp, MACB_SA1T, (dev->dev_addr[5] << 8) | (dev->dev_addr[4]));
macb_writel(lp, SA1T, (dev->dev_addr[5] << 8) | (dev->dev_addr[4]));
at91_emac_write(lp, MACB_SA2B, 0);
at91_emac_write(lp, MACB_SA2T, 0);
macb_writel(lp, SA2B, 0);
macb_writel(lp, SA2T, 0);
}
/*
......@@ -600,8 +582,8 @@ static void at91ether_sethashtable(struct net_device *dev)
mc_filter[bitnr >> 5] |= 1 << (bitnr & 31);
}
at91_emac_write(lp, MACB_HRB, mc_filter[0]);
at91_emac_write(lp, MACB_HRT, mc_filter[1]);
macb_writel(lp, HRB, mc_filter[0]);
macb_writel(lp, HRT, mc_filter[1]);
}
/*
......@@ -612,7 +594,7 @@ static void at91ether_set_multicast_list(struct net_device *dev)
struct at91_private *lp = netdev_priv(dev);
unsigned long cfg;
cfg = at91_emac_read(lp, MACB_NCFGR);
cfg = macb_readl(lp, NCFGR);
if (dev->flags & IFF_PROMISC) /* Enable promiscuous mode */
cfg |= MACB_BIT(CAF);
......@@ -620,19 +602,19 @@ static void at91ether_set_multicast_list(struct net_device *dev)
cfg &= ~MACB_BIT(CAF);
if (dev->flags & IFF_ALLMULTI) { /* Enable all multicast mode */
at91_emac_write(lp, MACB_HRT, -1);
at91_emac_write(lp, MACB_HRB, -1);
macb_writel(lp, HRT, -1);
macb_writel(lp, HRB, -1);
cfg |= MACB_BIT(NCFGR_MTI);
} else if (!netdev_mc_empty(dev)) { /* Enable specific multicasts */
at91ether_sethashtable(dev);
cfg |= MACB_BIT(NCFGR_MTI);
} else if (dev->flags & (~IFF_ALLMULTI)) { /* Disable all multicast mode */
at91_emac_write(lp, MACB_HRT, 0);
at91_emac_write(lp, MACB_HRB, 0);
macb_writel(lp, HRT, 0);
macb_writel(lp, HRB, 0);
cfg &= ~MACB_BIT(NCFGR_MTI);
}
at91_emac_write(lp, MACB_NCFGR, cfg);
macb_writel(lp, NCFGR, cfg);
}
/* ......................... ETHTOOL SUPPORT ........................... */
......@@ -765,11 +747,11 @@ static void at91ether_start(struct net_device *dev)
lp->rxBuffIndex = 0;
/* Program address of descriptor list in Rx Buffer Queue register */
at91_emac_write(lp, MACB_RBQP, (unsigned long) dlist_phys);
macb_writel(lp, RBQP, (unsigned long) dlist_phys);
/* Enable Receive and Transmit */
ctl = at91_emac_read(lp, MACB_NCR);
at91_emac_write(lp, MACB_NCR, ctl | MACB_BIT(RE) | MACB_BIT(TE));
ctl = macb_readl(lp, NCR);
macb_writel(lp, NCR, ctl | MACB_BIT(RE) | MACB_BIT(TE));
}
/*
......@@ -786,8 +768,8 @@ static int at91ether_open(struct net_device *dev)
clk_enable(lp->ether_clk); /* Re-enable Peripheral clock */
/* Clear internal statistics */
ctl = at91_emac_read(lp, MACB_NCR);
at91_emac_write(lp, MACB_NCR, ctl | MACB_BIT(CLRSTAT));
ctl = macb_readl(lp, NCR);
macb_writel(lp, NCR, ctl | MACB_BIT(CLRSTAT));
/* Update the MAC address (incase user has changed it) */
update_mac_address(dev);
......@@ -796,7 +778,7 @@ static int at91ether_open(struct net_device *dev)
enable_phyirq(dev);
/* Enable MAC interrupts */
at91_emac_write(lp, MACB_IER, MACB_BIT(RCOMP) | MACB_BIT(RXUBR)
macb_writel(lp, IER, MACB_BIT(RCOMP) | MACB_BIT(RXUBR)
| MACB_BIT(ISR_TUND) | MACB_BIT(ISR_RLE) | MACB_BIT(TCOMP)
| MACB_BIT(ISR_ROVR) | MACB_BIT(HRESP));
......@@ -821,14 +803,14 @@ static int at91ether_close(struct net_device *dev)
unsigned long ctl;
/* Disable Receiver and Transmitter */
ctl = at91_emac_read(lp, MACB_NCR);
at91_emac_write(lp, MACB_NCR, ctl & ~(MACB_BIT(TE) | MACB_BIT(RE)));
ctl = macb_readl(lp, NCR);
macb_writel(lp, NCR, ctl & ~(MACB_BIT(TE) | MACB_BIT(RE)));
/* Disable PHY interrupt */
disable_phyirq(dev);
/* Disable MAC interrupts */
at91_emac_write(lp, MACB_IDR, MACB_BIT(RCOMP) | MACB_BIT(RXUBR)
macb_writel(lp, IDR, MACB_BIT(RCOMP) | MACB_BIT(RXUBR)
| MACB_BIT(ISR_TUND) | MACB_BIT(ISR_RLE)
| MACB_BIT(TCOMP) | MACB_BIT(ISR_ROVR)
| MACB_BIT(HRESP));
......@@ -847,7 +829,7 @@ static int at91ether_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct at91_private *lp = netdev_priv(dev);
if (at91_emac_read(lp, MACB_TSR) & MACB_BIT(RM9200_BNQ)) {
if (macb_readl(lp, TSR) & MACB_BIT(RM9200_BNQ)) {
netif_stop_queue(dev);
/* Store packet information (to free when Tx completed) */
......@@ -857,9 +839,9 @@ static int at91ether_start_xmit(struct sk_buff *skb, struct net_device *dev)
dev->stats.tx_bytes += skb->len;
/* Set address of the data in the Transmit Address register */
at91_emac_write(lp, MACB_TAR, lp->skb_physaddr);
macb_writel(lp, TAR, lp->skb_physaddr);
/* Set length of the packet in the Transmit Control register */
at91_emac_write(lp, MACB_TCR, skb->len);
macb_writel(lp, TCR, skb->len);
} else {
printk(KERN_ERR "at91_ether.c: at91ether_start_xmit() called, but device is busy!\n");
......@@ -880,28 +862,28 @@ static struct net_device_stats *at91ether_stats(struct net_device *dev)
int ale, lenerr, seqe, lcol, ecol;
if (netif_running(dev)) {
dev->stats.rx_packets += at91_emac_read(lp, MACB_FRO); /* Good frames received */
ale = at91_emac_read(lp, MACB_ALE);
dev->stats.rx_packets += macb_readl(lp, FRO); /* Good frames received */
ale = macb_readl(lp, ALE);
dev->stats.rx_frame_errors += ale; /* Alignment errors */
lenerr = at91_emac_read(lp, MACB_ELE) + at91_emac_read(lp, MACB_USF);
lenerr = macb_readl(lp, ELE) + macb_readl(lp, USF);
dev->stats.rx_length_errors += lenerr; /* Excessive Length or Undersize Frame error */
seqe = at91_emac_read(lp, MACB_FCSE);
seqe = macb_readl(lp, FCSE);
dev->stats.rx_crc_errors += seqe; /* CRC error */
dev->stats.rx_fifo_errors += at91_emac_read(lp, MACB_RRE);/* Receive buffer not available */
dev->stats.rx_fifo_errors += macb_readl(lp, RRE);/* Receive buffer not available */
dev->stats.rx_errors += (ale + lenerr + seqe
+ at91_emac_read(lp, MACB_RSE) + at91_emac_read(lp, MACB_RJA));
+ macb_readl(lp, RSE) + macb_readl(lp, RJA));
dev->stats.tx_packets += at91_emac_read(lp, MACB_FTO); /* Frames successfully transmitted */
dev->stats.tx_fifo_errors += at91_emac_read(lp, MACB_TUND); /* Transmit FIFO underruns */
dev->stats.tx_carrier_errors += at91_emac_read(lp, MACB_CSE); /* Carrier Sense errors */
dev->stats.tx_heartbeat_errors += at91_emac_read(lp, MACB_STE);/* Heartbeat error */
dev->stats.tx_packets += macb_readl(lp, FTO); /* Frames successfully transmitted */
dev->stats.tx_fifo_errors += macb_readl(lp, TUND); /* Transmit FIFO underruns */
dev->stats.tx_carrier_errors += macb_readl(lp, CSE); /* Carrier Sense errors */
dev->stats.tx_heartbeat_errors += macb_readl(lp, STE);/* Heartbeat error */
lcol = at91_emac_read(lp, MACB_LCOL);
ecol = at91_emac_read(lp, MACB_EXCOL);
lcol = macb_readl(lp, LCOL);
ecol = macb_readl(lp, EXCOL);
dev->stats.tx_window_errors += lcol; /* Late collisions */
dev->stats.tx_aborted_errors += ecol; /* 16 collisions */
dev->stats.collisions += (at91_emac_read(lp, MACB_SCF) + at91_emac_read(lp, MACB_MCF) + lcol + ecol);
dev->stats.collisions += (macb_readl(lp, SCF) + macb_readl(lp, MCF) + lcol + ecol);
}
return &dev->stats;
}
......@@ -958,7 +940,7 @@ static irqreturn_t at91ether_interrupt(int irq, void *dev_id)
/* MAC Interrupt Status register indicates what interrupts are pending.
It is automatically cleared once read. */
intstatus = at91_emac_read(lp, MACB_ISR);
intstatus = macb_readl(lp, ISR);
if (intstatus & MACB_BIT(RCOMP)) /* Receive complete */
at91ether_rx(dev);
......@@ -978,9 +960,9 @@ static irqreturn_t at91ether_interrupt(int irq, void *dev_id)
/* Work-around for Errata #11 */
if (intstatus & MACB_BIT(RXUBR)) {
ctl = at91_emac_read(lp, MACB_NCR);
at91_emac_write(lp, MACB_NCR, ctl & ~MACB_BIT(RE));
at91_emac_write(lp, MACB_NCR, ctl | MACB_BIT(RE));
ctl = macb_readl(lp, NCR);
macb_writel(lp, NCR, ctl & ~MACB_BIT(RE));
macb_writel(lp, NCR, ctl | MACB_BIT(RE));
}
if (intstatus & MACB_BIT(ISR_ROVR))
......@@ -1081,8 +1063,8 @@ static int __init at91ether_probe(struct platform_device *pdev)
spin_lock_init(&lp->lock);
dev->base_addr = regs->start; /* physical base address */
lp->emac_base = ioremap(regs->start, regs->end - regs->start + 1);
if (!lp->emac_base) {
lp->regs = ioremap(regs->start, regs->end - regs->start + 1);
if (!lp->regs) {
res = -ENOMEM;
goto err_free_dev;
}
......@@ -1118,12 +1100,12 @@ static int __init at91ether_probe(struct platform_device *pdev)
get_mac_address(dev); /* Get ethernet address and store it in dev->dev_addr */
update_mac_address(dev); /* Program ethernet address into MAC */
at91_emac_write(lp, MACB_NCR, 0);
macb_writel(lp, NCR, 0);
if (board_data->is_rmii)
at91_emac_write(lp, MACB_NCFGR, MACB_BF(CLK, MACB_CLK_DIV32) | MACB_BIT(BIG) | MACB_BIT(RM9200_RMII));
macb_writel(lp, NCFGR, MACB_BF(CLK, MACB_CLK_DIV32) | MACB_BIT(BIG) | MACB_BIT(RM9200_RMII));
else
at91_emac_write(lp, MACB_NCFGR, MACB_BF(CLK, MACB_CLK_DIV32) | MACB_BIT(BIG));
macb_writel(lp, NCFGR, MACB_BF(CLK, MACB_CLK_DIV32) | MACB_BIT(BIG));
/* Detect PHY */
if (!at91ether_phy_detect(lp)) {
......@@ -1167,8 +1149,8 @@ static int __init at91ether_probe(struct platform_device *pdev)
/* Display ethernet banner */
printk(KERN_INFO "%s: AT91 ethernet at 0x%08x int=%d %s%s (%pM)\n",
dev->name, (uint) dev->base_addr, dev->irq,
at91_emac_read(lp, MACB_NCFGR) & MACB_BIT(SPD) ? "100-" : "10-",
at91_emac_read(lp, MACB_NCFGR) & MACB_BIT(FD) ? "FullDuplex" : "HalfDuplex",
macb_readl(lp, NCFGR) & MACB_BIT(SPD) ? "100-" : "10-",
macb_readl(lp, NCFGR) & MACB_BIT(FD) ? "FullDuplex" : "HalfDuplex",
dev->dev_addr);
if ((lp->phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID))
printk(KERN_INFO "%s: Davicom 9161 PHY %s\n", dev->name, (lp->phy_media == PORT_FIBRE) ? "(Fiber)" : "(Copper)");
......@@ -1205,7 +1187,7 @@ static int __init at91ether_probe(struct platform_device *pdev)
clk_disable(lp->ether_clk);
clk_put(lp->ether_clk);
err_ioumap:
iounmap(lp->emac_base);
iounmap(lp->regs);
err_free_dev:
free_netdev(dev);
return res;
......
drivers/net/ethernet/cadence/at91_ether.h
浏览文件 @ f8bded38
......@@ -88,7 +88,7 @@ struct at91_private
struct macb_platform_data board_data; /* board-specific
* configuration (shared with
* macb for common data */
void __iomem *emac_base; /* base register address */
void __iomem *regs; /* base register address */
struct clk *ether_clk; /* clock */
/* PHY */
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或