Merge tag 'usb-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are some small USB fixes and new device ids for 4.0-rc6.  Nothing
  major, some xhci fixes for reported problems, and some usb-serial
  device ids.

  All have been in linux-next for a while"

* tag 'usb-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: ftdi_sio: Use jtag quirk for SNAP Connect E10
  usb: isp1760: fix spin unlock in the error path of isp1760_udc_start
  usb: xhci: apply XHCI_AVOID_BEI quirk to all Intel xHCI controllers
  usb: xhci: handle Config Error Change (CEC) in xhci driver
  USB: keyspan_pda: add new device id
  USB: ftdi_sio: Added custom PID for Synapse Wireless product

drivers/usb/host/xhci-hub.c

@@ -387,6 +387,10 @@ static void xhci_clear_port_change_bit(struct xhci_hcd *xhci, u16 wValue,
 		status = PORT_PLC;
 		port_change_bit = "link state";
 		break;
+	case USB_PORT_FEAT_C_PORT_CONFIG_ERROR:
+		status = PORT_CEC;
+		port_change_bit = "config error";
+		break;
 	default:
 		/* Should never happen */
 		return;
@@ -588,6 +592,8 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
 			status |= USB_PORT_STAT_C_LINK_STATE << 16;
 		if ((raw_port_status & PORT_WRC))
 			status |= USB_PORT_STAT_C_BH_RESET << 16;
+		if ((raw_port_status & PORT_CEC))
+			status |= USB_PORT_STAT_C_CONFIG_ERROR << 16;
 	}
 
 	if (hcd->speed != HCD_USB3) {
@@ -1005,6 +1011,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		case USB_PORT_FEAT_C_OVER_CURRENT:
 		case USB_PORT_FEAT_C_ENABLE:
 		case USB_PORT_FEAT_C_PORT_LINK_STATE:
+		case USB_PORT_FEAT_C_PORT_CONFIG_ERROR:
 			xhci_clear_port_change_bit(xhci, wValue, wIndex,
 					port_array[wIndex], temp);
 			break;
@@ -1069,7 +1076,7 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
 	 */
 	status = bus_state->resuming_ports;
 
-	mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC;
+	mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC | PORT_CEC;
 
 	spin_lock_irqsave(&xhci->lock, flags);
 	/* For each port, did anything change?  If so, set that bit in buf. */

drivers/usb/host/xhci-pci.c

@@ -115,6 +115,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
 		xhci->quirks |= XHCI_LPM_SUPPORT;
 		xhci->quirks |= XHCI_INTEL_HOST;
+		xhci->quirks |= XHCI_AVOID_BEI;
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
 			pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) {
@@ -130,7 +131,6 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		 * PPT chipsets.
 		 */
 		xhci->quirks |= XHCI_SPURIOUS_REBOOT;
-		xhci->quirks |= XHCI_AVOID_BEI;
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
 		pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI) {

drivers/usb/isp1760/isp1760-udc.c

@@ -1203,7 +1203,7 @@ static int isp1760_udc_start(struct usb_gadget *gadget,
 
 	if (udc->driver) {
 		dev_err(udc->isp->dev, "UDC already has a gadget driver\n");
-		spin_unlock(&udc->lock);
+		spin_unlock_irqrestore(&udc->lock, flags);
 		return -EBUSY;
 	}
 

drivers/usb/serial/ftdi_sio.c

@@ -604,6 +604,7 @@ static const struct usb_device_id id_table_combined[] = {
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, FTDI_NT_ORIONLXM_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_SYNAPSE_SS200_PID) },
 	/*
 	 * ELV devices:
 	 */
@@ -1883,8 +1884,12 @@ static int ftdi_8u2232c_probe(struct usb_serial *serial)
 {
 	struct usb_device *udev = serial->dev;
 
-	if ((udev->manufacturer && !strcmp(udev->manufacturer, "CALAO Systems")) ||
-	    (udev->product && !strcmp(udev->product, "BeagleBone/XDS100V2")))
+	if (udev->manufacturer && !strcmp(udev->manufacturer, "CALAO Systems"))
+		return ftdi_jtag_probe(serial);
+
+	if (udev->product &&
+		(!strcmp(udev->product, "BeagleBone/XDS100V2") ||
+		 !strcmp(udev->product, "SNAP Connect E10")))
 		return ftdi_jtag_probe(serial);
 
 	return 0;

drivers/usb/serial/ftdi_sio_ids.h

@@ -561,6 +561,12 @@
  */
 #define FTDI_NT_ORIONLXM_PID	0x7c90	/* OrionLXm Substation Automation Platform */
 
+/*
+ * Synapse Wireless product ids (FTDI_VID)
+ * http://www.synapse-wireless.com
+ */
+#define FTDI_SYNAPSE_SS200_PID 0x9090 /* SS200 - SNAP Stick 200 */
+
 
 /********************************/
 /** third-party VID/PID combos **/

drivers/usb/serial/keyspan_pda.c

@@ -61,6 +61,7 @@ struct keyspan_pda_private {
 /* For Xircom PGSDB9 and older Entrega version of the same device */
 #define XIRCOM_VENDOR_ID		0x085a
 #define XIRCOM_FAKE_ID			0x8027
+#define XIRCOM_FAKE_ID_2		0x8025 /* "PGMFHUB" serial */
 #define ENTREGA_VENDOR_ID		0x1645
 #define ENTREGA_FAKE_ID			0x8093
 
@@ -70,6 +71,7 @@ static const struct usb_device_id id_table_combined[] = {
 #endif
 #ifdef XIRCOM
 	{ USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) },
+	{ USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID_2) },
 	{ USB_DEVICE(ENTREGA_VENDOR_ID, ENTREGA_FAKE_ID) },
 #endif
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_ID) },
@@ -93,6 +95,7 @@ static const struct usb_device_id id_table_fake[] = {
 #ifdef XIRCOM
 static const struct usb_device_id id_table_fake_xircom[] = {
 	{ USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) },
+	{ USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID_2) },
 	{ USB_DEVICE(ENTREGA_VENDOR_ID, ENTREGA_FAKE_ID) },
 	{ }
 };