提交 f855911c 编写于 作者: L Li, Aubrey 提交者: H. Peter Anvin

x86/pmc_atom: Expose PMC device state and platform sleep state

Add the following interfaces to exposes PMC device state and sleep
state residency via debugfs:
	/sys/kernel/debugfs/pmc_atom/dev_state
	/sys/kernel/debugfs/pmc_atom/sleep_state
Signed-off-by: NAubrey Li <aubrey.li@linux.intel.com>
Link: http://lkml.kernel.org/r/53B0FF59.8000600@linux.intel.comSigned-off-by: NKasagar, Srinidhi <srinidhi.kasagar@intel.com>
Reviewed-by: NRudramuni, Vishwesh M <vishwesh.m.rudramuni@intel.com>
Reviewed-by: NJoe Perches <joe@perches.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
上级 b00055ca
......@@ -25,6 +25,10 @@
#define PMC_MMIO_REG_LEN 0x100
#define PMC_REG_BIT_WIDTH 32
/* BIOS uses FUNC_DIS to disable specific function */
#define PMC_FUNC_DIS 0x34
#define PMC_FUNC_DIS_2 0x38
/* S0ix wake event control */
#define PMC_S0IX_WAKE_EN 0x3C
......@@ -40,6 +44,57 @@
BIT_ORED_DEDICATED_IRQ_GPSC | \
BIT_SHARED_IRQ_GPSS)
/* The timers acumulate time spent in sleep state */
#define PMC_S0IR_TMR 0x80
#define PMC_S0I1_TMR 0x84
#define PMC_S0I2_TMR 0x88
#define PMC_S0I3_TMR 0x8C
#define PMC_S0_TMR 0x90
/* Sleep state counter is in units of of 32us */
#define PMC_TMR_SHIFT 5
/* These registers reflect D3 status of functions */
#define PMC_D3_STS_0 0xA0
#define BIT_LPSS1_F0_DMA BIT(0)
#define BIT_LPSS1_F1_PWM1 BIT(1)
#define BIT_LPSS1_F2_PWM2 BIT(2)
#define BIT_LPSS1_F3_HSUART1 BIT(3)
#define BIT_LPSS1_F4_HSUART2 BIT(4)
#define BIT_LPSS1_F5_SPI BIT(5)
#define BIT_LPSS1_F6_XXX BIT(6)
#define BIT_LPSS1_F7_XXX BIT(7)
#define BIT_SCC_EMMC BIT(8)
#define BIT_SCC_SDIO BIT(9)
#define BIT_SCC_SDCARD BIT(10)
#define BIT_SCC_MIPI BIT(11)
#define BIT_HDA BIT(12)
#define BIT_LPE BIT(13)
#define BIT_OTG BIT(14)
#define BIT_USH BIT(15)
#define BIT_GBE BIT(16)
#define BIT_SATA BIT(17)
#define BIT_USB_EHCI BIT(18)
#define BIT_SEC BIT(19)
#define BIT_PCIE_PORT0 BIT(20)
#define BIT_PCIE_PORT1 BIT(21)
#define BIT_PCIE_PORT2 BIT(22)
#define BIT_PCIE_PORT3 BIT(23)
#define BIT_LPSS2_F0_DMA BIT(24)
#define BIT_LPSS2_F1_I2C1 BIT(25)
#define BIT_LPSS2_F2_I2C2 BIT(26)
#define BIT_LPSS2_F3_I2C3 BIT(27)
#define BIT_LPSS2_F4_I2C4 BIT(28)
#define BIT_LPSS2_F5_I2C5 BIT(29)
#define BIT_LPSS2_F6_I2C6 BIT(30)
#define BIT_LPSS2_F7_I2C7 BIT(31)
#define PMC_D3_STS_1 0xA4
#define BIT_SMB BIT(0)
#define BIT_OTG_SS_PHY BIT(1)
#define BIT_USH_SS_PHY BIT(2)
#define BIT_DFX BIT(3)
/* PMC I/O Registers */
#define ACPI_BASE_ADDR_OFFSET 0x40
#define ACPI_BASE_ADDR_MASK 0xFFFFFE00
......
......@@ -19,18 +19,69 @@
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/device.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/io.h>
#include <asm/pmc_atom.h>
#define DRIVER_NAME KBUILD_MODNAME
struct pmc_dev {
u32 base_addr;
void __iomem *regmap;
#ifdef CONFIG_DEBUG_FS
struct dentry *dbgfs_dir;
#endif /* CONFIG_DEBUG_FS */
};
static struct pmc_dev pmc_device;
static u32 acpi_base_addr;
struct pmc_dev_map {
const char *name;
u32 bit_mask;
};
static const struct pmc_dev_map dev_map[] = {
{"0 - LPSS1_F0_DMA", BIT_LPSS1_F0_DMA},
{"1 - LPSS1_F1_PWM1", BIT_LPSS1_F1_PWM1},
{"2 - LPSS1_F2_PWM2", BIT_LPSS1_F2_PWM2},
{"3 - LPSS1_F3_HSUART1", BIT_LPSS1_F3_HSUART1},
{"4 - LPSS1_F4_HSUART2", BIT_LPSS1_F4_HSUART2},
{"5 - LPSS1_F5_SPI", BIT_LPSS1_F5_SPI},
{"6 - LPSS1_F6_Reserved", BIT_LPSS1_F6_XXX},
{"7 - LPSS1_F7_Reserved", BIT_LPSS1_F7_XXX},
{"8 - SCC_EMMC", BIT_SCC_EMMC},
{"9 - SCC_SDIO", BIT_SCC_SDIO},
{"10 - SCC_SDCARD", BIT_SCC_SDCARD},
{"11 - SCC_MIPI", BIT_SCC_MIPI},
{"12 - HDA", BIT_HDA},
{"13 - LPE", BIT_LPE},
{"14 - OTG", BIT_OTG},
{"15 - USH", BIT_USH},
{"16 - GBE", BIT_GBE},
{"17 - SATA", BIT_SATA},
{"18 - USB_EHCI", BIT_USB_EHCI},
{"19 - SEC", BIT_SEC},
{"20 - PCIE_PORT0", BIT_PCIE_PORT0},
{"21 - PCIE_PORT1", BIT_PCIE_PORT1},
{"22 - PCIE_PORT2", BIT_PCIE_PORT2},
{"23 - PCIE_PORT3", BIT_PCIE_PORT3},
{"24 - LPSS2_F0_DMA", BIT_LPSS2_F0_DMA},
{"25 - LPSS2_F1_I2C1", BIT_LPSS2_F1_I2C1},
{"26 - LPSS2_F2_I2C2", BIT_LPSS2_F2_I2C2},
{"27 - LPSS2_F3_I2C3", BIT_LPSS2_F3_I2C3},
{"28 - LPSS2_F3_I2C4", BIT_LPSS2_F4_I2C4},
{"29 - LPSS2_F5_I2C5", BIT_LPSS2_F5_I2C5},
{"30 - LPSS2_F6_I2C6", BIT_LPSS2_F6_I2C6},
{"31 - LPSS2_F7_I2C7", BIT_LPSS2_F7_I2C7},
{"32 - SMB", BIT_SMB},
{"33 - OTG_SS_PHY", BIT_OTG_SS_PHY},
{"34 - USH_SS_PHY", BIT_USH_SS_PHY},
{"35 - DFX", BIT_DFX},
};
static inline u32 pmc_reg_read(struct pmc_dev *pmc, int reg_offset)
{
return readl(pmc->regmap + reg_offset);
......@@ -71,9 +122,125 @@ static void pmc_hw_reg_setup(struct pmc_dev *pmc)
pmc_reg_write(pmc, PMC_S0IX_WAKE_EN, (u32)PMC_WAKE_EN_SETTING);
}
#ifdef CONFIG_DEBUG_FS
static int pmc_dev_state_show(struct seq_file *s, void *unused)
{
struct pmc_dev *pmc = s->private;
u32 func_dis, func_dis_2, func_dis_index;
u32 d3_sts_0, d3_sts_1, d3_sts_index;
int dev_num, dev_index, reg_index;
func_dis = pmc_reg_read(pmc, PMC_FUNC_DIS);
func_dis_2 = pmc_reg_read(pmc, PMC_FUNC_DIS_2);
d3_sts_0 = pmc_reg_read(pmc, PMC_D3_STS_0);
d3_sts_1 = pmc_reg_read(pmc, PMC_D3_STS_1);
dev_num = ARRAY_SIZE(dev_map);
for (dev_index = 0; dev_index < dev_num; dev_index++) {
reg_index = dev_index / PMC_REG_BIT_WIDTH;
if (reg_index) {
func_dis_index = func_dis_2;
d3_sts_index = d3_sts_1;
} else {
func_dis_index = func_dis;
d3_sts_index = d3_sts_0;
}
seq_printf(s, "Dev: %-32s\tState: %s [%s]\n",
dev_map[dev_index].name,
dev_map[dev_index].bit_mask & func_dis_index ?
"Disabled" : "Enabled ",
dev_map[dev_index].bit_mask & d3_sts_index ?
"D3" : "D0");
}
return 0;
}
static int pmc_dev_state_open(struct inode *inode, struct file *file)
{
return single_open(file, pmc_dev_state_show, inode->i_private);
}
static const struct file_operations pmc_dev_state_ops = {
.open = pmc_dev_state_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static int pmc_sleep_tmr_show(struct seq_file *s, void *unused)
{
struct pmc_dev *pmc = s->private;
u64 s0ir_tmr, s0i1_tmr, s0i2_tmr, s0i3_tmr, s0_tmr;
s0ir_tmr = pmc_reg_read(pmc, PMC_S0IR_TMR) << PMC_TMR_SHIFT;
s0i1_tmr = pmc_reg_read(pmc, PMC_S0I1_TMR) << PMC_TMR_SHIFT;
s0i2_tmr = pmc_reg_read(pmc, PMC_S0I2_TMR) << PMC_TMR_SHIFT;
s0i3_tmr = pmc_reg_read(pmc, PMC_S0I3_TMR) << PMC_TMR_SHIFT;
s0_tmr = pmc_reg_read(pmc, PMC_S0_TMR) << PMC_TMR_SHIFT;
seq_printf(s, "S0IR Residency:\t%lldus\n", s0ir_tmr);
seq_printf(s, "S0I1 Residency:\t%lldus\n", s0i1_tmr);
seq_printf(s, "S0I2 Residency:\t%lldus\n", s0i2_tmr);
seq_printf(s, "S0I3 Residency:\t%lldus\n", s0i3_tmr);
seq_printf(s, "S0 Residency:\t%lldus\n", s0_tmr);
return 0;
}
static int pmc_sleep_tmr_open(struct inode *inode, struct file *file)
{
return single_open(file, pmc_sleep_tmr_show, inode->i_private);
}
static const struct file_operations pmc_sleep_tmr_ops = {
.open = pmc_sleep_tmr_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static void pmc_dbgfs_unregister(struct pmc_dev *pmc)
{
if (!pmc->dbgfs_dir)
return;
debugfs_remove_recursive(pmc->dbgfs_dir);
pmc->dbgfs_dir = NULL;
}
static int pmc_dbgfs_register(struct pmc_dev *pmc, struct pci_dev *pdev)
{
struct dentry *dir, *f;
dir = debugfs_create_dir("pmc_atom", NULL);
if (!dir)
return -ENOMEM;
f = debugfs_create_file("dev_state", S_IFREG | S_IRUGO,
dir, pmc, &pmc_dev_state_ops);
if (!f) {
dev_err(&pdev->dev, "dev_states register failed\n");
goto err;
}
f = debugfs_create_file("sleep_state", S_IFREG | S_IRUGO,
dir, pmc, &pmc_sleep_tmr_ops);
if (!f) {
dev_err(&pdev->dev, "sleep_state register failed\n");
goto err;
}
pmc->dbgfs_dir = dir;
return 0;
err:
pmc_dbgfs_unregister(pmc);
return -ENODEV;
}
#endif /* CONFIG_DEBUG_FS */
static int pmc_setup_dev(struct pci_dev *pdev)
{
struct pmc_dev *pmc = &pmc_device;
int ret;
/* Obtain ACPI base address */
pci_read_config_dword(pdev, ACPI_BASE_ADDR_OFFSET, &acpi_base_addr);
......@@ -94,6 +261,14 @@ static int pmc_setup_dev(struct pci_dev *pdev)
/* PMC hardware registers setup */
pmc_hw_reg_setup(pmc);
#ifdef CONFIG_DEBUG_FS
ret = pmc_dbgfs_register(pmc, pdev);
if (ret) {
iounmap(pmc->regmap);
return ret;
}
#endif /* CONFIG_DEBUG_FS */
return 0;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册