提交 f7df8fe5 编写于 作者: S Stanislaw Gruszka 提交者: John W. Linville

rt2800: merge 5xxx normal mode setup

Merge code which program the same registes at the end of rfcsr
initialization for 5592, 5392 and 5390 chips.
Signed-off-by: NStanislaw Gruszka <stf_xl@wp.pl>
Acked-by: NGertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 ab11bb28
......@@ -4396,6 +4396,35 @@ static u8 rt2800_init_rx_filter(struct rt2x00_dev *rt2x00dev,
return rfcsr24;
}
static void rt2800_normal_mode_setup_5xxx(struct rt2x00_dev *rt2x00dev)
{
u8 reg;
u16 eeprom;
/* Turn off unused DAC1 and ADC1 to reduce power consumption */
rt2800_bbp_read(rt2x00dev, 138, &reg);
rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0, &eeprom);
if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH) == 1)
rt2x00_set_field8(&reg, BBP138_RX_ADC1, 0);
if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH) == 1)
rt2x00_set_field8(&reg, BBP138_TX_DAC1, 1);
rt2800_bbp_write(rt2x00dev, 138, reg);
rt2800_rfcsr_read(rt2x00dev, 38, &reg);
rt2x00_set_field8(&reg, RFCSR38_RX_LO1_EN, 0);
rt2800_rfcsr_write(rt2x00dev, 38, reg);
rt2800_rfcsr_read(rt2x00dev, 39, &reg);
rt2x00_set_field8(&reg, RFCSR39_RX_LO2_EN, 0);
rt2800_rfcsr_write(rt2x00dev, 39, reg);
rt2800_bbp4_mac_if_ctrl(rt2x00dev);
rt2800_rfcsr_read(rt2x00dev, 30, &reg);
rt2x00_set_field8(&reg, RFCSR30_RX_VCM, 2);
rt2800_rfcsr_write(rt2x00dev, 30, reg);
}
static void rt2800_init_rfcsr_305x_soc(struct rt2x00_dev *rt2x00dev)
{
rt2800_rfcsr_write(rt2x00dev, 0, 0x50);
......@@ -4725,6 +4754,8 @@ static void rt2800_init_rfcsr_5390(struct rt2x00_dev *rt2x00dev)
rt2800_rfcsr_write(rt2x00dev, 61, 0xdd);
rt2800_rfcsr_write(rt2x00dev, 62, 0x00);
rt2800_rfcsr_write(rt2x00dev, 63, 0x00);
rt2800_normal_mode_setup_5xxx(rt2x00dev);
}
static void rt2800_init_rfcsr_5392(struct rt2x00_dev *rt2x00dev)
......@@ -4788,13 +4819,12 @@ static void rt2800_init_rfcsr_5392(struct rt2x00_dev *rt2x00dev)
rt2800_rfcsr_write(rt2x00dev, 61, 0x91);
rt2800_rfcsr_write(rt2x00dev, 62, 0x39);
rt2800_rfcsr_write(rt2x00dev, 63, 0x07);
rt2800_normal_mode_setup_5xxx(rt2x00dev);
}
static void rt2800_init_rfcsr_5592(struct rt2x00_dev *rt2x00dev)
{
u8 reg;
u16 eeprom;
rt2800_rfcsr_write(rt2x00dev, 1, 0x3F);
rt2800_rfcsr_write(rt2x00dev, 3, 0x08);
rt2800_rfcsr_write(rt2x00dev, 3, 0x08);
......@@ -4823,34 +4853,11 @@ static void rt2800_init_rfcsr_5592(struct rt2x00_dev *rt2x00dev)
rt2800_adjust_freq_offset(rt2x00dev);
rt2800_bbp_read(rt2x00dev, 138, &reg);
/* Turn off unused DAC1 and ADC1 to reduce power consumption */
rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0, &eeprom);
if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH) == 1)
rt2x00_set_field8(&reg, BBP138_RX_ADC1, 0);
if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH) == 1)
rt2x00_set_field8(&reg, BBP138_TX_DAC1, 1);
rt2800_bbp_write(rt2x00dev, 138, reg);
/* Enable DC filter */
if (rt2x00_rt_rev_gte(rt2x00dev, RT5592, REV_RT5592C))
rt2800_bbp_write(rt2x00dev, 103, 0xc0);
rt2800_rfcsr_read(rt2x00dev, 38, &reg);
rt2x00_set_field8(&reg, RFCSR38_RX_LO1_EN, 0);
rt2800_rfcsr_write(rt2x00dev, 38, reg);
rt2800_rfcsr_read(rt2x00dev, 39, &reg);
rt2x00_set_field8(&reg, RFCSR39_RX_LO2_EN, 0);
rt2800_rfcsr_write(rt2x00dev, 39, reg);
rt2800_bbp4_mac_if_ctrl(rt2x00dev);
rt2800_rfcsr_read(rt2x00dev, 30, &reg);
rt2x00_set_field8(&reg, RFCSR30_RX_VCM, 2);
rt2800_rfcsr_write(rt2x00dev, 30, reg);
rt2800_normal_mode_setup_5xxx(rt2x00dev);
}
static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
......@@ -5055,17 +5062,14 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
rt2800_rfcsr_write(rt2x00dev, 17, rfcsr);
}
if (rt2x00_rt(rt2x00dev, RT3090) ||
rt2x00_rt(rt2x00dev, RT5592)) {
rt2800_bbp_read(rt2x00dev, 138, &bbp);
if (rt2x00_rt(rt2x00dev, RT3090)) {
/* Turn off unused DAC1 and ADC1 to reduce power consumption */
rt2800_bbp_read(rt2x00dev, 138, &bbp);
rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0, &eeprom);
if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH) == 1)
rt2x00_set_field8(&bbp, BBP138_RX_ADC1, 0);
if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH) == 1)
rt2x00_set_field8(&bbp, BBP138_TX_DAC1, 1);
rt2800_bbp_write(rt2x00dev, 138, bbp);
}
......@@ -5111,22 +5115,6 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
rt2800_rfcsr_write(rt2x00dev, 29, rfcsr);
}
if (rt2x00_rt(rt2x00dev, RT5390) ||
rt2x00_rt(rt2x00dev, RT5392) ||
rt2x00_rt(rt2x00dev, RT5592)) {
rt2800_rfcsr_read(rt2x00dev, 38, &rfcsr);
rt2x00_set_field8(&rfcsr, RFCSR38_RX_LO1_EN, 0);
rt2800_rfcsr_write(rt2x00dev, 38, rfcsr);
rt2800_rfcsr_read(rt2x00dev, 39, &rfcsr);
rt2x00_set_field8(&rfcsr, RFCSR39_RX_LO2_EN, 0);
rt2800_rfcsr_write(rt2x00dev, 39, rfcsr);
rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr);
rt2x00_set_field8(&rfcsr, RFCSR30_RX_VCM, 2);
rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
}
return 0;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册