提交 f7d41ae8 编写于 作者: J Jarkko Nikula 提交者: Mark Brown

ASoC: Update DAPM debug and error prints

Switch printk and pr_ prints to dev_ variants. It is helpful to see
parent device of DAPM context especially when there are multiple DAPM
contexts (codecs currently).

This is mostly simple conversion. Exceptions are in snd_soc_dapm_set_pin
that prints also pin state, uniform "dapm: unknown pin" error prints from
snd_soc_dapm_set_pin, snd_soc_dapm_force_enable_pin and
snd_soc_dapm_ignore_suspend, and pop_dbg which is converted by an another
patch.
Signed-off-by: NJarkko Nikula <jhnikula@gmail.com>
Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
上级 b95fccbc
......@@ -319,8 +319,8 @@ static int dapm_update_bits(struct snd_soc_dapm_widget *widget)
pop_wait(card->pop_time);
snd_soc_write(codec, widget->reg, new);
}
pr_debug("reg %x old %x new %x change %d\n", widget->reg,
old, new, change);
dev_dbg(dapm->dev, "reg %x old %x new %x change %d\n", widget->reg,
old, new, change);
return change;
}
......@@ -375,9 +375,9 @@ static int dapm_new_mixer(struct snd_soc_dapm_context *dapm,
path->long_name);
ret = snd_ctl_add(card, path->kcontrol);
if (ret < 0) {
printk(KERN_ERR "asoc: failed to add dapm kcontrol %s: %d\n",
path->long_name,
ret);
dev_err(dapm->dev,
"asoc: failed to add dapm kcontrol %s: %d\n",
path->long_name, ret);
kfree(path->long_name);
path->long_name = NULL;
return ret;
......@@ -397,7 +397,7 @@ static int dapm_new_mux(struct snd_soc_dapm_context *dapm,
int ret = 0;
if (!w->num_kcontrols) {
printk(KERN_ERR "asoc: mux %s has no controls\n", w->name);
dev_err(dapm->dev, "asoc: mux %s has no controls\n", w->name);
return -EINVAL;
}
......@@ -413,7 +413,7 @@ static int dapm_new_mux(struct snd_soc_dapm_context *dapm,
return ret;
err:
printk(KERN_ERR "asoc: failed to add kcontrol %s\n", w->name);
dev_err(dapm->dev, "asoc: failed to add kcontrol %s\n", w->name);
return ret;
}
......@@ -422,7 +422,8 @@ static int dapm_new_pga(struct snd_soc_dapm_context *dapm,
struct snd_soc_dapm_widget *w)
{
if (w->num_kcontrols)
pr_err("asoc: PGA controls not supported: '%s'\n", w->name);
dev_err(w->dapm->dev,
"asoc: PGA controls not supported: '%s'\n", w->name);
return 0;
}
......@@ -448,7 +449,8 @@ static int snd_soc_dapm_suspend_check(struct snd_soc_dapm_widget *widget)
case SNDRV_CTL_POWER_D3hot:
case SNDRV_CTL_POWER_D3cold:
if (widget->ignore_suspend)
pr_debug("%s ignoring suspend\n", widget->name);
dev_dbg(widget->dapm->dev, "%s ignoring suspend\n",
widget->name);
return widget->ignore_suspend;
default:
return 1;
......@@ -579,7 +581,7 @@ static int dapm_generic_apply_power(struct snd_soc_dapm_widget *w)
/* call any power change event handlers */
if (w->event)
pr_debug("power %s event for %s flags %x\n",
dev_dbg(w->dapm->dev, "power %s event for %s flags %x\n",
w->power ? "on" : "off",
w->name, w->event_flags);
......@@ -754,8 +756,9 @@ static void dapm_seq_run_coalesced(struct snd_soc_dapm_context *dapm,
w->name);
ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMU);
if (ret < 0)
pr_err("%s: pre event failed: %d\n",
w->name, ret);
dev_err(dapm->dev,
"%s: pre event failed: %d\n",
w->name, ret);
}
/* power down pre event */
......@@ -765,8 +768,9 @@ static void dapm_seq_run_coalesced(struct snd_soc_dapm_context *dapm,
w->name);
ret = w->event(w, NULL, SND_SOC_DAPM_PRE_PMD);
if (ret < 0)
pr_err("%s: pre event failed: %d\n",
w->name, ret);
dev_err(dapm->dev,
"%s: pre event failed: %d\n",
w->name, ret);
}
}
......@@ -787,8 +791,9 @@ static void dapm_seq_run_coalesced(struct snd_soc_dapm_context *dapm,
ret = w->event(w,
NULL, SND_SOC_DAPM_POST_PMU);
if (ret < 0)
pr_err("%s: post event failed: %d\n",
w->name, ret);
dev_err(dapm->dev,
"%s: post event failed: %d\n",
w->name, ret);
}
/* power down post event */
......@@ -798,8 +803,9 @@ static void dapm_seq_run_coalesced(struct snd_soc_dapm_context *dapm,
w->name);
ret = w->event(w, NULL, SND_SOC_DAPM_POST_PMD);
if (ret < 0)
pr_err("%s: post event failed: %d\n",
w->name, ret);
dev_err(dapm->dev,
"%s: post event failed: %d\n",
w->name, ret);
}
}
}
......@@ -880,8 +886,8 @@ static void dapm_seq_run(struct snd_soc_dapm_context *dapm,
}
if (ret < 0)
pr_err("Failed to apply widget power: %d\n",
ret);
dev_err(w->dapm->dev,
"Failed to apply widget power: %d\n", ret);
}
if (!list_empty(&pending))
......@@ -975,7 +981,8 @@ static int dapm_power_widgets(struct snd_soc_dapm_context *dapm, int event)
ret = snd_soc_dapm_set_bias_level(card, dapm,
SND_SOC_BIAS_STANDBY);
if (ret != 0)
pr_err("Failed to turn on bias: %d\n", ret);
dev_err(dapm->dev,
"Failed to turn on bias: %d\n", ret);
}
/* If we're changing to all on or all off then prepare */
......@@ -983,7 +990,8 @@ static int dapm_power_widgets(struct snd_soc_dapm_context *dapm, int event)
(!sys_power && dapm->bias_level == SND_SOC_BIAS_ON)) {
ret = snd_soc_dapm_set_bias_level(card, dapm, SND_SOC_BIAS_PREPARE);
if (ret != 0)
pr_err("Failed to prepare bias: %d\n", ret);
dev_err(dapm->dev,
"Failed to prepare bias: %d\n", ret);
}
/* Power down widgets first; try to avoid amplifying pops. */
......@@ -996,7 +1004,8 @@ static int dapm_power_widgets(struct snd_soc_dapm_context *dapm, int event)
if (dapm->bias_level == SND_SOC_BIAS_PREPARE && !sys_power) {
ret = snd_soc_dapm_set_bias_level(card, dapm, SND_SOC_BIAS_STANDBY);
if (ret != 0)
pr_err("Failed to apply standby bias: %d\n", ret);
dev_err(dapm->dev,
"Failed to apply standby bias: %d\n", ret);
}
/* If we're in standby and can support bias off then do that */
......@@ -1004,14 +1013,16 @@ static int dapm_power_widgets(struct snd_soc_dapm_context *dapm, int event)
dapm->idle_bias_off) {
ret = snd_soc_dapm_set_bias_level(card, dapm, SND_SOC_BIAS_OFF);
if (ret != 0)
pr_err("Failed to turn off bias: %d\n", ret);
dev_err(dapm->dev,
"Failed to turn off bias: %d\n", ret);
}
/* If we just powered up then move to active bias */
if (dapm->bias_level == SND_SOC_BIAS_PREPARE && sys_power) {
ret = snd_soc_dapm_set_bias_level(card, dapm, SND_SOC_BIAS_ON);
if (ret != 0)
pr_err("Failed to apply active bias: %d\n", ret);
dev_err(dapm->dev,
"Failed to apply active bias: %d\n", ret);
}
pop_dbg(card->pop_time, "DAPM sequencing finished, waiting %dms\n",
......@@ -1111,9 +1122,9 @@ void snd_soc_dapm_debugfs_init(struct snd_soc_dapm_context *dapm)
dapm->debugfs_dapm, w,
&dapm_widget_power_fops);
if (!d)
printk(KERN_WARNING
"ASoC: Failed to create %s debugfs file\n",
w->name);
dev_warn(w->dapm->dev,
"ASoC: Failed to create %s debugfs file\n",
w->name);
}
}
#else
......@@ -1279,7 +1290,8 @@ static int snd_soc_dapm_set_pin(struct snd_soc_dapm_context *dapm,
list_for_each_entry(w, &dapm->widgets, list) {
if (!strcmp(w->name, pin)) {
pr_debug("dapm: %s: pin %s\n", dapm->codec->name, pin);
dev_dbg(w->dapm->dev, "dapm: pin %s = %d\n",
pin, status);
w->connected = status;
/* Allow disabling of forced pins */
if (status == 0)
......@@ -1288,8 +1300,7 @@ static int snd_soc_dapm_set_pin(struct snd_soc_dapm_context *dapm,
}
}
pr_err("dapm: %s: configuring unknown pin %s\n",
dapm->codec->name, pin);
dev_err(dapm->dev, "dapm: unknown pin %s\n", pin);
return -EINVAL;
}
......@@ -1415,8 +1426,8 @@ static int snd_soc_dapm_add_route(struct snd_soc_dapm_context *dapm,
return 0;
err:
printk(KERN_WARNING "asoc: no dapm match for %s --> %s --> %s\n", source,
control, sink);
dev_warn(dapm->dev, "asoc: no dapm match for %s --> %s --> %s\n",
source, control, sink);
kfree(path);
return ret;
}
......@@ -1442,9 +1453,8 @@ int snd_soc_dapm_add_routes(struct snd_soc_dapm_context *dapm,
for (i = 0; i < num; i++) {
ret = snd_soc_dapm_add_route(dapm, route);
if (ret < 0) {
printk(KERN_ERR "Failed to add route %s->%s\n",
route->source,
route->sink);
dev_err(dapm->dev, "Failed to add route %s->%s\n",
route->source, route->sink);
return ret;
}
route++;
......@@ -1982,9 +1992,9 @@ int snd_soc_dapm_new_controls(struct snd_soc_dapm_context *dapm,
for (i = 0; i < num; i++) {
ret = snd_soc_dapm_new_control(dapm, widget);
if (ret < 0) {
printk(KERN_ERR
"ASoC: Failed to create DAPM control %s: %d\n",
widget->name, ret);
dev_err(dapm->dev,
"ASoC: Failed to create DAPM control %s: %d\n",
widget->name, ret);
return ret;
}
widget++;
......@@ -2002,8 +2012,8 @@ static void soc_dapm_stream_event(struct snd_soc_dapm_context *dapm,
{
if (!w->sname)
continue;
pr_debug("widget %s\n %s stream %s event %d\n",
w->name, w->sname, stream, event);
dev_dbg(w->dapm->dev, "widget %s\n %s stream %s event %d\n",
w->name, w->sname, stream, event);
if (strstr(w->sname, stream)) {
switch(event) {
case SND_SOC_DAPM_STREAM_START:
......@@ -2085,15 +2095,15 @@ int snd_soc_dapm_force_enable_pin(struct snd_soc_dapm_context *dapm,
list_for_each_entry(w, &dapm->widgets, list) {
if (!strcmp(w->name, pin)) {
pr_debug("dapm: %s: pin %s\n", dapm->codec->name, pin);
dev_dbg(w->dapm->dev,
"dapm: force enable pin %s\n", pin);
w->connected = 1;
w->force = 1;
return 0;
}
}
pr_err("dapm: %s: configuring unknown pin %s\n",
dapm->codec->name, pin);
dev_err(dapm->dev, "dapm: unknown pin %s\n", pin);
return -EINVAL;
}
EXPORT_SYMBOL_GPL(snd_soc_dapm_force_enable_pin);
......@@ -2180,7 +2190,7 @@ int snd_soc_dapm_ignore_suspend(struct snd_soc_dapm_context *dapm,
}
}
pr_err("Unknown DAPM pin: %s\n", pin);
dev_err(dapm->dev, "dapm: unknown pin %s\n", pin);
return -EINVAL;
}
EXPORT_SYMBOL_GPL(snd_soc_dapm_ignore_suspend);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册