doc:process: add links where missing

Some documents are refering to others without links. With this
patch I add those missing links.

This patch affects only documents under process/ and labels where
necessary.
Signed-off-by: NFederico Vaga <federico.vaga@vaga.pv.it>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

Documentation/admin-guide/devices.rst

+.. _admin_devices:
 
 Linux allocated devices (4.x+ version)
 ======================================

Documentation/dev-tools/coccinelle.rst

@@ -4,6 +4,8 @@
 
 .. highlight:: none
 
+.. _devtools_coccinelle:
+
 Coccinelle
 ==========
 

Documentation/doc-guide/sphinx.rst

+.. _sphinxdoc:
+
 Introduction
 ============
 

Documentation/driver-api/pm/devices.rst

@@ -6,6 +6,8 @@
 .. |struct wakeup_source| replace:: :c:type:`struct wakeup_source <wakeup_source>`
 .. |struct device| replace:: :c:type:`struct device <device>`
 
+.. _driverapi_pm_devices:
+
 ==============================
 Device Power Management Basics
 ==============================

Documentation/process/4.Coding.rst

@@ -315,7 +315,8 @@ variety of potential coding problems; it can also propose fixes for those
 problems.  Quite a few "semantic patches" for the kernel have been packaged
 under the scripts/coccinelle directory; running "make coccicheck" will run
 through those semantic patches and report on any problems found.  See
-Documentation/dev-tools/coccinelle.rst for more information.
+:ref:`Documentation/dev-tools/coccinelle.rst <devtools_coccinelle>`
+for more information.
 
 Other kinds of portability errors are best found by compiling your code for
 other architectures.  If you do not happen to have an S/390 system or a

Documentation/process/5.Posting.rst

@@ -9,9 +9,10 @@ kernel.  Unsurprisingly, the kernel development community has evolved a set
 of conventions and procedures which are used in the posting of patches;
 following them will make life much easier for everybody involved.  This
 document will attempt to cover these expectations in reasonable detail;
-more information can also be found in the files process/submitting-patches.rst,
-process/submitting-drivers.rst, and process/submit-checklist.rst in the kernel
-documentation directory.
+more information can also be found in the files
+:ref:`Documentation/process/submitting-patches.rst <submittingpatches>`,
+:ref:`Documentation/process/submitting-drivers.rst  <submittingdrivers>`
+and :ref:`Documentation/process/submit-checklist.rst <submitchecklist>`.
 
 
 When to post
@@ -198,8 +199,10 @@ pass it to diff with the "-X" option.
 
 The tags mentioned above are used to describe how various developers have
 been associated with the development of this patch.  They are described in
-detail in the process/submitting-patches.rst document; what follows here is a
-brief summary.  Each of these lines has the format:
+detail in
+the :ref:`Documentation/process/submitting-patches.rst <submittingpatches>`
+document; what follows here is a brief summary.  Each of these lines has
+the format:
 
 ::
 
@@ -210,8 +213,8 @@ The tags in common use are:
  - Signed-off-by: this is a developer's certification that he or she has
    the right to submit the patch for inclusion into the kernel.  It is an
    agreement to the Developer's Certificate of Origin, the full text of
-   which can be found in Documentation/process/submitting-patches.rst.  Code
-   without a proper signoff cannot be merged into the mainline.
+   which can be found in :ref:`Documentation/process/submitting-patches.rst <submittingpatches>`
+   Code without a proper signoff cannot be merged into the mainline.
 
  - Co-developed-by: states that the patch was also created by another developer
    along with the original author.  This is useful at times when multiple
@@ -226,7 +229,7 @@ The tags in common use are:
    it to work.
 
  - Reviewed-by: the named developer has reviewed the patch for correctness;
-   see the reviewer's statement in Documentation/process/submitting-patches.rst
+   see the reviewer's statement in :ref:`Documentation/process/submitting-patches.rst <submittingpatches>`
    for more detail.
 
  - Reported-by: names a user who reported a problem which is fixed by this
@@ -253,8 +256,8 @@ take care of:
    be examined in any detail.  If there is any doubt at all, mail the patch
    to yourself and convince yourself that it shows up intact.
 
-   Documentation/process/email-clients.rst has some helpful hints on making
-   specific mail clients work for sending patches.
+   :ref:`Documentation/process/email-clients.rst <email_clients>` has some
+   helpful hints on making specific mail clients work for sending patches.
 
  - Are you sure your patch is free of silly mistakes?  You should always
    run patches through scripts/checkpatch.pl and address the complaints it

Documentation/process/8.Conclusion.rst

@@ -5,9 +5,10 @@ For more information
 
 There are numerous sources of information on Linux kernel development and
 related topics.  First among those will always be the Documentation
-directory found in the kernel source distribution.  The top-level process/howto.rst
-file is an important starting point; process/submitting-patches.rst and
-process/submitting-drivers.rst are also something which all kernel developers should
+directory found in the kernel source distribution.  The top-level :ref:`process/howto.rst <process_howto>`
+file is an important starting point; :ref:`process/submitting-patches.rst <submittingpatches>`
+and :ref:`process/submitting-drivers.rst  <submittingdrivers>`
+are also something which all kernel developers should
 read.  Many internal kernel APIs are documented using the kerneldoc
 mechanism; "make htmldocs" or "make pdfdocs" can be used to generate those
 documents in HTML or PDF format (though the version of TeX shipped by some

Documentation/process/changes.rst

@@ -326,7 +326,7 @@ Kernel documentation
 Sphinx
 ------
 
-Please see :ref:`sphinx_install` in ``Documentation/doc-guide/sphinx.rst``
+Please see :ref:`sphinx_install` in :ref:`Documentation/doc-guide/sphinx.rst <sphinxdoc>`
 for details about Sphinx requirements.
 
 Getting updated software

Documentation/process/coding-style.rst

@@ -1075,5 +1075,5 @@ gcc internals and indent, all available from http://www.gnu.org/manual/
 WG14 is the international standardization working group for the programming
 language C, URL: http://www.open-std.org/JTC1/SC22/WG14/
 
-Kernel process/coding-style.rst, by greg@kroah.com at OLS 2002:
+Kernel :ref:`process/coding-style.rst <codingstyle>`, by greg@kroah.com at OLS 2002:
 http://www.kroah.com/linux/talks/ols_2002_kernel_codingstyle_talk/html/

Documentation/process/howto.rst

@@ -298,9 +298,9 @@ two weeks, but it can be longer if there are no pressing problems.  A
 security-related problem, instead, can cause a release to happen almost
 instantly.
 
-The file Documentation/process/stable-kernel-rules.rst in the kernel tree
-documents what kinds of changes are acceptable for the -stable tree, and
-how the release process works.
+The file :ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>`
+in the kernel tree documents what kinds of changes are acceptable for
+the -stable tree, and how the release process works.
 
 4.x -git patches
 ~~~~~~~~~~~~~~~~
@@ -360,7 +360,8 @@ tool.  For details on how to use the kernel bugzilla, please see:
 
 	https://bugzilla.kernel.org/page.cgi?id=faq.html
 
-The file admin-guide/reporting-bugs.rst in the main kernel source directory has a good
+The file :ref:`admin-guide/reporting-bugs.rst <reportingbugs>`
+in the main kernel source directory has a good
 template for how to report a possible kernel bug, and details what kind
 of information is needed by the kernel developers to help track down the
 problem.
@@ -426,7 +427,7 @@ add your statements between the individual quoted sections instead of
 writing at the top of the mail.
 
 If you add patches to your mail, make sure they are plain readable text
-as stated in Documentation/process/submitting-patches.rst.
+as stated in :ref:`Documentation/process/submitting-patches.rst <submittingpatches>`.
 Kernel developers don't want to deal with
 attachments or compressed patches; they may want to comment on
 individual lines of your patch, which works only that way. Make sure you

Documentation/process/management-style.rst

@@ -5,8 +5,9 @@ Linux kernel management style
 
 This is a short document describing the preferred (or made up, depending
 on who you ask) management style for the linux kernel.  It's meant to
-mirror the process/coding-style.rst document to some degree, and mainly written to
-avoid answering [#f1]_  the same (or similar) questions over and over again.
+mirror the :ref:`process/coding-style.rst <codingstyle>` document to some
+degree, and mainly written to avoid answering [#f1]_  the same (or similar)
+questions over and over again.
 
 Management style is very personal and much harder to quantify than
 simple coding style rules, so this document may or may not have anything

Documentation/process/submitting-drivers.rst

@@ -16,7 +16,8 @@ you should probably talk to XFree86 (http://www.xfree86.org/) and/or X.Org
 
    Oh, and we don't really recommend submitting changes to XFree86 :)
 
-Also read the Documentation/process/submitting-patches.rst document.
+Also read the :ref:`Documentation/process/submitting-patches.rst <submittingpatches>`
+document.
 
 
 Allocating Device Numbers
@@ -27,7 +28,8 @@ by the Linux assigned name and number authority (currently this is
 Torben Mathiasen). The site is http://www.lanana.org/. This
 also deals with allocating numbers for devices that are not going to
 be submitted to the mainstream kernel.
-See Documentation/admin-guide/devices.rst for more information on this.
+See :ref:`Documentation/admin-guide/devices.rst <admin_devices>`
+for more information on this.
 
 If you don't use assigned numbers then when your device is submitted it will
 be given an assigned number even if that is different from values you may
@@ -117,7 +119,7 @@ PM support:
 		anything.  For the driver testing instructions see
 		Documentation/power/drivers-testing.txt and for a relatively
 		complete overview of the power management issues related to
-		drivers see Documentation/driver-api/pm/devices.rst.
+		drivers see :ref:`Documentation/driver-api/pm/devices.rst <driverapi_pm_devices>`.
 
 Control:
 		In general if there is active maintenance of a driver by