pinctrl: sunxi: Prepare for alternative bias voltage setting methods

H6 has a different I/O voltage bias setting method than A80. Prepare
existing code for using alternative bias voltage setting methods.
Signed-off-by: NOndrej Jirman <megous@megous.com>
Acked-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

drivers/pinctrl/sunxi/pinctrl-sun9i-a80-r.c

@@ -153,7 +153,7 @@ static const struct sunxi_pinctrl_desc sun9i_a80_r_pinctrl_data = {
 	.pin_base = PL_BASE,
 	.irq_banks = 2,
 	.disable_strict_mode = true,
-	.has_io_bias_cfg = true,
+	.io_bias_cfg_variant = BIAS_VOLTAGE_GRP_CONFIG,
 };
 
 static int sun9i_a80_r_pinctrl_probe(struct platform_device *pdev)

drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c

@@ -722,7 +722,7 @@ static const struct sunxi_pinctrl_desc sun9i_a80_pinctrl_data = {
 	.npins = ARRAY_SIZE(sun9i_a80_pins),
 	.irq_banks = 5,
 	.disable_strict_mode = true,
-	.has_io_bias_cfg = true,
+	.io_bias_cfg_variant = BIAS_VOLTAGE_GRP_CONFIG,
 };
 
 static int sun9i_a80_pinctrl_probe(struct platform_device *pdev)

drivers/pinctrl/sunxi/pinctrl-sunxi.c

@@ -617,7 +617,7 @@ static int sunxi_pinctrl_set_io_bias_cfg(struct sunxi_pinctrl *pctl,
 	u32 val, reg;
 	int uV;
 
-	if (!pctl->desc->has_io_bias_cfg)
+	if (!pctl->desc->io_bias_cfg_variant)
 		return 0;
 
 	uV = regulator_get_voltage(supply);
@@ -628,25 +628,32 @@ static int sunxi_pinctrl_set_io_bias_cfg(struct sunxi_pinctrl *pctl,
 	if (uV == 0)
 		return 0;
 
-	/* Configured value must be equal or greater to actual voltage */
-	if (uV <= 1800000)
-		val = 0x0; /* 1.8V */
-	else if (uV <= 2500000)
-		val = 0x6; /* 2.5V */
-	else if (uV <= 2800000)
-		val = 0x9; /* 2.8V */
-	else if (uV <= 3000000)
-		val = 0xA; /* 3.0V */
-	else
-		val = 0xD; /* 3.3V */
-
-	pin -= pctl->desc->pin_base;
-
-	reg = readl(pctl->membase + sunxi_grp_config_reg(pin));
-	reg &= ~IO_BIAS_MASK;
-	writel(reg | val, pctl->membase + sunxi_grp_config_reg(pin));
-
-	return 0;
+	switch (pctl->desc->io_bias_cfg_variant) {
+	case BIAS_VOLTAGE_GRP_CONFIG:
+		/*
+		 * Configured value must be equal or greater to actual
+		 * voltage.
+		 */
+		if (uV <= 1800000)
+			val = 0x0; /* 1.8V */
+		else if (uV <= 2500000)
+			val = 0x6; /* 2.5V */
+		else if (uV <= 2800000)
+			val = 0x9; /* 2.8V */
+		else if (uV <= 3000000)
+			val = 0xA; /* 3.0V */
+		else
+			val = 0xD; /* 3.3V */
+
+		pin -= pctl->desc->pin_base;
+
+		reg = readl(pctl->membase + sunxi_grp_config_reg(pin));
+		reg &= ~IO_BIAS_MASK;
+		writel(reg | val, pctl->membase + sunxi_grp_config_reg(pin));
+		return 0;
+	default:
+		return -EINVAL;
+	}
 }
 
 static int sunxi_pmx_get_funcs_cnt(struct pinctrl_dev *pctldev)

drivers/pinctrl/sunxi/pinctrl-sunxi.h

@@ -95,6 +95,15 @@
 #define PINCTRL_SUN7I_A20	BIT(7)
 #define PINCTRL_SUN8I_R40	BIT(8)
 
+enum sunxi_desc_bias_voltage {
+	BIAS_VOLTAGE_NONE,
+	/*
+	 * Bias voltage configuration is done through
+	 * Pn_GRP_CONFIG registers, as seen on A80 SoC.
+	 */
+	BIAS_VOLTAGE_GRP_CONFIG,
+};
+
 struct sunxi_desc_function {
 	unsigned long	variant;
 	const char	*name;
@@ -117,7 +126,7 @@ struct sunxi_pinctrl_desc {
 	const unsigned int		*irq_bank_map;
 	bool				irq_read_needs_mux;
 	bool				disable_strict_mode;
-	bool				has_io_bias_cfg;
+	enum sunxi_desc_bias_voltage	io_bias_cfg_variant;
 };
 
 struct sunxi_pinctrl_function {