提交 f694e53b 编写于 作者: A Andres Salomon 提交者: Linus Torvalds

lxfb: add power management functionality

This adds the ability to suspend/resume the lxfb driver, which includes:
  - Register and palette saving code; registers are stored in lxfb_par.
    A few MSR values are saved as well.
  - lx_powerup and lx_powerdown functions which restore/save registers and
    enable/disable graphic engines.
  - lxfb_suspend/lxfb_resume

Originally based on a patch by Jordan Crouse.

[akpm@linux-foundation.org: be conventional, save an ifdef]
Signed-off-by: NAndres Salomon <dilinger@debian.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 aec40532
......@@ -3,6 +3,16 @@
#include <linux/fb.h>
#define GP_REG_COUNT (0x7c / 4)
#define DC_REG_COUNT (0xf0 / 4)
#define VP_REG_COUNT (0x158 / 8)
#define FP_REG_COUNT (0x60 / 8)
#define DC_PAL_COUNT 0x104
#define DC_HFILT_COUNT 0x100
#define DC_VFILT_COUNT 0x100
#define VP_COEFF_SIZE 0x1000
#define OUTPUT_CRT 0x01
#define OUTPUT_PANEL 0x02
......@@ -12,6 +22,27 @@ struct lxfb_par {
void __iomem *gp_regs;
void __iomem *dc_regs;
void __iomem *vp_regs;
#ifdef CONFIG_PM
int powered_down;
/* register state, for power mgmt functionality */
struct {
uint64_t padsel;
uint64_t dotpll;
uint64_t dfglcfg;
uint64_t dcspare;
} msr;
uint32_t gp[GP_REG_COUNT];
uint32_t dc[DC_REG_COUNT];
uint64_t vp[VP_REG_COUNT];
uint64_t fp[FP_REG_COUNT];
uint32_t pal[DC_PAL_COUNT];
uint32_t hcoeff[DC_HFILT_COUNT * 2];
uint32_t vcoeff[DC_VFILT_COUNT];
uint32_t vp_coeff[VP_COEFF_SIZE / 4];
#endif
};
static inline unsigned int lx_get_pitch(unsigned int xres, int bpp)
......@@ -27,6 +58,11 @@ int lx_blank_display(struct fb_info *, int);
void lx_set_palette_reg(struct fb_info *, unsigned int, unsigned int,
unsigned int, unsigned int);
#ifdef CONFIG_PM
int lx_powerdown(struct fb_info *info);
int lx_powerup(struct fb_info *info);
#endif
/* Graphics Processor registers (table 6-29 from the data book) */
enum gp_registers {
......@@ -182,6 +218,9 @@ enum dc_registers {
#define DC_DV_CTL_DV_LINE_SIZE_2K (1 << 10)
#define DC_DV_CTL_DV_LINE_SIZE_4K (1 << 11)
#define DC_DV_CTL_DV_LINE_SIZE_8K ((1 << 10) | (1 << 11))
#define DC_DV_CTL_CLEAR_DV_RAM (1 << 0)
#define DC_IRQ_FILT_CTL_H_FILT_SEL (1 << 10)
#define DC_CLR_KEY_CLR_KEY_EN (1 << 24)
......@@ -267,6 +306,8 @@ enum vp_registers {
VP_A2YE,
VP_A3YE, /* 0x150 */
VP_VCR = 0x1000, /* 0x1000 - 0x1fff */
};
#define VP_VCFG_VID_EN (1 << 0)
......@@ -319,6 +360,10 @@ enum fp_registers {
#define FP_PT2_SCRC (1 << 27) /* shfclk free */
#define FP_PM_P (1 << 24) /* panel power ctl */
#define FP_PM_PANEL_PWR_UP (1 << 3) /* r/o */
#define FP_PM_PANEL_PWR_DOWN (1 << 2) /* r/o */
#define FP_PM_PANEL_OFF (1 << 1) /* r/o */
#define FP_PM_PANEL_ON (1 << 0) /* r/o */
#define FP_DFC_BC ((1 << 4) | (1 << 5) | (1 << 6))
......
......@@ -428,6 +428,45 @@ static struct fb_info * __init lxfb_init_fbinfo(struct device *dev)
return info;
}
#ifdef CONFIG_PM
static int lxfb_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct fb_info *info = pci_get_drvdata(pdev);
if (state.event == PM_EVENT_SUSPEND) {
acquire_console_sem();
lx_powerdown(info);
fb_set_suspend(info, 1);
release_console_sem();
}
/* there's no point in setting PCI states; we emulate PCI, so
* we don't end up getting power savings anyways */
return 0;
}
static int lxfb_resume(struct pci_dev *pdev)
{
struct fb_info *info = pci_get_drvdata(pdev);
int ret;
acquire_console_sem();
ret = lx_powerup(info);
if (ret) {
printk(KERN_ERR "lxfb: power up failed!\n");
return ret;
}
fb_set_suspend(info, 0);
release_console_sem();
return 0;
}
#else
#define lxfb_suspend NULL
#define lxfb_resume NULL
#endif
static int __init lxfb_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
......@@ -553,6 +592,8 @@ static struct pci_driver lxfb_driver = {
.id_table = lxfb_id_table,
.probe = lxfb_probe,
.remove = lxfb_remove,
.suspend = lxfb_suspend,
.resume = lxfb_resume,
};
#ifndef MODULE
......
......@@ -232,8 +232,8 @@ static void lx_graphics_disable(struct fb_info *info)
val = read_dc(par, DC_CLR_KEY);
write_dc(par, DC_CLR_KEY, val & ~DC_CLR_KEY_CLR_KEY_EN);
/* We don't actually blank the panel, due to the long latency
involved with bringing it back */
/* turn off the panel */
write_fp(par, FP_PM, read_fp(par, FP_PM) & ~FP_PM_P);
val = read_vp(par, VP_MISC) | VP_MISC_DACPWRDN;
write_vp(par, VP_MISC, val);
......@@ -321,13 +321,8 @@ static void lx_graphics_enable(struct fb_info *info)
}
/* Turn the panel on (if it isn't already) */
if (par->output & OUTPUT_PANEL) {
temp = read_fp(par, FP_PM);
if (!(temp & 0x09))
write_fp(par, FP_PM, temp | FP_PM_P);
}
if (par->output & OUTPUT_PANEL)
write_fp(par, FP_PM, read_fp(par, FP_PM) | FP_PM_P);
}
unsigned int lx_framebuffer_size(void)
......@@ -575,3 +570,253 @@ int lx_blank_display(struct fb_info *info, int blank_mode)
return 0;
}
#ifdef CONFIG_PM
static void lx_save_regs(struct lxfb_par *par)
{
uint32_t filt;
int i;
/* wait for the BLT engine to stop being busy */
do {
i = read_gp(par, GP_BLT_STATUS);
} while ((i & GP_BLT_STATUS_PB) || !(i & GP_BLT_STATUS_CE));
/* save MSRs */
rdmsrl(MSR_LX_MSR_PADSEL, par->msr.padsel);
rdmsrl(MSR_GLCP_DOTPLL, par->msr.dotpll);
rdmsrl(MSR_LX_GLD_MSR_CONFIG, par->msr.dfglcfg);
rdmsrl(MSR_LX_SPARE_MSR, par->msr.dcspare);
write_dc(par, DC_UNLOCK, DC_UNLOCK_UNLOCK);
/* save registers */
memcpy(par->gp, par->gp_regs, sizeof(par->gp));
memcpy(par->dc, par->dc_regs, sizeof(par->dc));
memcpy(par->vp, par->vp_regs, sizeof(par->vp));
memcpy(par->fp, par->vp_regs + VP_FP_START, sizeof(par->fp));
/* save the palette */
write_dc(par, DC_PAL_ADDRESS, 0);
for (i = 0; i < ARRAY_SIZE(par->pal); i++)
par->pal[i] = read_dc(par, DC_PAL_DATA);
/* save the horizontal filter coefficients */
filt = par->dc[DC_IRQ_FILT_CTL] | DC_IRQ_FILT_CTL_H_FILT_SEL;
for (i = 0; i < ARRAY_SIZE(par->hcoeff); i += 2) {
write_dc(par, DC_IRQ_FILT_CTL, (filt & 0xffffff00) | i);
par->hcoeff[i] = read_dc(par, DC_FILT_COEFF1);
par->hcoeff[i + 1] = read_dc(par, DC_FILT_COEFF2);
}
/* save the vertical filter coefficients */
filt &= ~DC_IRQ_FILT_CTL_H_FILT_SEL;
for (i = 0; i < ARRAY_SIZE(par->vcoeff); i++) {
write_dc(par, DC_IRQ_FILT_CTL, (filt & 0xffffff00) | i);
par->vcoeff[i] = read_dc(par, DC_FILT_COEFF1);
}
/* save video coeff ram */
memcpy(par->vp_coeff, par->vp_regs + VP_VCR, sizeof(par->vp_coeff));
}
static void lx_restore_gfx_proc(struct lxfb_par *par)
{
int i;
/* a bunch of registers require GP_RASTER_MODE to be set first */
write_gp(par, GP_RASTER_MODE, par->gp[GP_RASTER_MODE]);
for (i = 0; i < ARRAY_SIZE(par->gp); i++) {
switch (i) {
case GP_RASTER_MODE:
case GP_VECTOR_MODE:
case GP_BLT_MODE:
case GP_BLT_STATUS:
case GP_HST_SRC:
/* FIXME: restore LUT data */
case GP_LUT_INDEX:
case GP_LUT_DATA:
/* don't restore these registers */
break;
default:
write_gp(par, i, par->gp[i]);
}
}
}
static void lx_restore_display_ctlr(struct lxfb_par *par)
{
uint32_t filt;
int i;
wrmsrl(MSR_LX_SPARE_MSR, par->msr.dcspare);
for (i = 0; i < ARRAY_SIZE(par->dc); i++) {
switch (i) {
case DC_UNLOCK:
/* unlock the DC; runs first */
write_dc(par, DC_UNLOCK, DC_UNLOCK_UNLOCK);
break;
case DC_GENERAL_CFG:
case DC_DISPLAY_CFG:
/* disable all while restoring */
write_dc(par, i, 0);
break;
case DC_DV_CTL:
/* set all ram to dirty */
write_dc(par, i, par->dc[i] | DC_DV_CTL_CLEAR_DV_RAM);
case DC_RSVD_1:
case DC_RSVD_2:
case DC_RSVD_3:
case DC_LINE_CNT:
case DC_PAL_ADDRESS:
case DC_PAL_DATA:
case DC_DFIFO_DIAG:
case DC_CFIFO_DIAG:
case DC_FILT_COEFF1:
case DC_FILT_COEFF2:
case DC_RSVD_4:
case DC_RSVD_5:
/* don't restore these registers */
break;
default:
write_dc(par, i, par->dc[i]);
}
}
/* restore the palette */
write_dc(par, DC_PAL_ADDRESS, 0);
for (i = 0; i < ARRAY_SIZE(par->pal); i++)
write_dc(par, DC_PAL_DATA, par->pal[i]);
/* restore the horizontal filter coefficients */
filt = par->dc[DC_IRQ_FILT_CTL] | DC_IRQ_FILT_CTL_H_FILT_SEL;
for (i = 0; i < ARRAY_SIZE(par->hcoeff); i += 2) {
write_dc(par, DC_IRQ_FILT_CTL, (filt & 0xffffff00) | i);
write_dc(par, DC_FILT_COEFF1, par->hcoeff[i]);
write_dc(par, DC_FILT_COEFF2, par->hcoeff[i + 1]);
}
/* restore the vertical filter coefficients */
filt &= ~DC_IRQ_FILT_CTL_H_FILT_SEL;
for (i = 0; i < ARRAY_SIZE(par->vcoeff); i++) {
write_dc(par, DC_IRQ_FILT_CTL, (filt & 0xffffff00) | i);
write_dc(par, DC_FILT_COEFF1, par->vcoeff[i]);
}
}
static void lx_restore_video_proc(struct lxfb_par *par)
{
int i;
wrmsrl(MSR_LX_GLD_MSR_CONFIG, par->msr.dfglcfg);
wrmsrl(MSR_LX_MSR_PADSEL, par->msr.padsel);
for (i = 0; i < ARRAY_SIZE(par->vp); i++) {
switch (i) {
case VP_VCFG:
case VP_DCFG:
case VP_PAR:
case VP_PDR:
case VP_CCS:
case VP_RSVD_0:
/* case VP_VDC: */ /* why should this not be restored? */
case VP_RSVD_1:
case VP_CRC32:
/* don't restore these registers */
break;
default:
write_vp(par, i, par->vp[i]);
}
}
/* restore video coeff ram */
memcpy(par->vp_regs + VP_VCR, par->vp_coeff, sizeof(par->vp_coeff));
}
static void lx_restore_regs(struct lxfb_par *par)
{
int i;
lx_set_dotpll((u32) (par->msr.dotpll >> 32));
lx_restore_gfx_proc(par);
lx_restore_display_ctlr(par);
lx_restore_video_proc(par);
/* Flat Panel */
for (i = 0; i < ARRAY_SIZE(par->fp); i++) {
switch (i) {
case FP_PM:
case FP_RSVD_0:
case FP_RSVD_1:
case FP_RSVD_2:
case FP_RSVD_3:
case FP_RSVD_4:
/* don't restore these registers */
break;
default:
write_fp(par, i, par->fp[i]);
}
}
/* control the panel */
if (par->fp[FP_PM] & FP_PM_P) {
/* power on the panel if not already power{ed,ing} on */
if (!(read_fp(par, FP_PM) &
(FP_PM_PANEL_ON|FP_PM_PANEL_PWR_UP)))
write_fp(par, FP_PM, par->fp[FP_PM]);
} else {
/* power down the panel if not already power{ed,ing} down */
if (!(read_fp(par, FP_PM) &
(FP_PM_PANEL_OFF|FP_PM_PANEL_PWR_DOWN)))
write_fp(par, FP_PM, par->fp[FP_PM]);
}
/* turn everything on */
write_vp(par, VP_VCFG, par->vp[VP_VCFG]);
write_vp(par, VP_DCFG, par->vp[VP_DCFG]);
write_dc(par, DC_DISPLAY_CFG, par->dc[DC_DISPLAY_CFG]);
/* do this last; it will enable the FIFO load */
write_dc(par, DC_GENERAL_CFG, par->dc[DC_GENERAL_CFG]);
/* lock the door behind us */
write_dc(par, DC_UNLOCK, DC_UNLOCK_LOCK);
}
int lx_powerdown(struct fb_info *info)
{
struct lxfb_par *par = info->par;
if (par->powered_down)
return 0;
lx_save_regs(par);
lx_graphics_disable(info);
par->powered_down = 1;
return 0;
}
int lx_powerup(struct fb_info *info)
{
struct lxfb_par *par = info->par;
if (!par->powered_down)
return 0;
lx_restore_regs(par);
par->powered_down = 0;
return 0;
}
#endif
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册