usb: host: remove selects of USB_ARCH_HAS_?HCI

USB_ARCH_HAS_EHCI, USB_ARCH_HAS_OHCI, and USB_ARCH_HAS_XHCI were just
removed. Selecting them is a nop. The select statements for these
symbols can be removed too.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

arch/arm/Kconfig

@@ -534,7 +534,6 @@ config ARCH_DOVE
 	select PINCTRL
 	select PINCTRL_DOVE
 	select PLAT_ORION_LEGACY
-	select USB_ARCH_HAS_EHCI
 	help
 	  Support for the Marvell Dove SoC 88AP510
 
@@ -633,7 +632,6 @@ config ARCH_LPC32XX
 	select GENERIC_CLOCKEVENTS
 	select HAVE_IDE
 	select HAVE_PWM
-	select USB_ARCH_HAS_OHCI
 	select USE_OF
 	help
 	  Support for the NXP LPC32XX family of processors
@@ -770,7 +768,6 @@ config ARCH_S3C64XX
 	select SAMSUNG_ATAGS
 	select SAMSUNG_WAKEMASK
 	select SAMSUNG_WDT_RESET
-	select USB_ARCH_HAS_OHCI
 	help
 	  Samsung S3C64XX series based systems
 

arch/arm/mach-exynos/Kconfig

@@ -36,7 +36,6 @@ config ARCH_EXYNOS5
 	select HAVE_ARM_SCU if SMP
 	select HAVE_SMP
 	select PINCTRL
-	select USB_ARCH_HAS_XHCI
 	help
 	  Samsung EXYNOS5 (Cortex-A15) SoC based systems
 

arch/arm/mach-omap2/Kconfig

@@ -21,7 +21,6 @@ config ARCH_OMAP3
 	select PM_OPP if PM
 	select PM_RUNTIME if CPU_IDLE
 	select SOC_HAS_OMAP2_SDRC
-	select USB_ARCH_HAS_EHCI if USB_SUPPORT
 
 config ARCH_OMAP4
 	bool "TI OMAP4"
@@ -42,7 +41,6 @@ config ARCH_OMAP4
 	select PL310_ERRATA_727915
 	select PM_OPP if PM
 	select PM_RUNTIME if CPU_IDLE
-	select USB_ARCH_HAS_EHCI if USB_SUPPORT
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_775420
 

arch/arm/mach-shmobile/Kconfig

@@ -102,8 +102,6 @@ config ARCH_R8A7778
 	select CPU_V7
 	select SH_CLK_CPG
 	select ARM_GIC
-	select USB_ARCH_HAS_EHCI
-	select USB_ARCH_HAS_OHCI
 
 config ARCH_R8A7779
 	bool "R-Car H1 (R8A77790)"
@@ -111,8 +109,6 @@ config ARCH_R8A7779
 	select ARM_GIC
 	select CPU_V7
 	select SH_CLK_CPG
-	select USB_ARCH_HAS_EHCI
-	select USB_ARCH_HAS_OHCI
 	select RENESAS_INTC_IRQPIN
 
 config ARCH_R8A7790

arch/arm/mach-tegra/Kconfig

@@ -19,7 +19,6 @@ config ARCH_TEGRA
 	select RESET_CONTROLLER
 	select SOC_BUS
 	select SPARSE_IRQ
-	select USB_ARCH_HAS_EHCI if USB_SUPPORT
 	select USB_ULPI if USB_PHY
 	select USB_ULPI_VIEWPORT if USB_PHY
 	select USE_OF

arch/mips/Kconfig

@@ -67,8 +67,6 @@ config MIPS_ALCHEMY
 	select SYS_SUPPORTS_APM_EMULATION
 	select ARCH_REQUIRE_GPIOLIB
 	select SYS_SUPPORTS_ZBOOT
-	select USB_ARCH_HAS_OHCI
-	select USB_ARCH_HAS_EHCI
 
 config AR7
 	bool "Texas Instruments AR7"
@@ -360,7 +358,6 @@ config MIPS_SEAD3
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_SMARTMIPS
 	select SYS_SUPPORTS_MICROMIPS
-	select USB_ARCH_HAS_EHCI
 	select USB_EHCI_BIG_ENDIAN_DESC
 	select USB_EHCI_BIG_ENDIAN_MMIO
 	select USE_OF
@@ -718,8 +715,6 @@ config CAVIUM_OCTEON_SOC
 	select SWAP_IO_SPACE
 	select HW_HAS_PCI
 	select ZONE_DMA32
-	select USB_ARCH_HAS_OHCI
-	select USB_ARCH_HAS_EHCI
 	select HOLES_IN_ZONE
 	select ARCH_REQUIRE_GPIOLIB
 	help
@@ -756,8 +751,6 @@ config NLM_XLR_BOARD
 	select ZONE_DMA32 if 64BIT
 	select SYNC_R4K
 	select SYS_HAS_EARLY_PRINTK
-	select USB_ARCH_HAS_OHCI if USB_SUPPORT
-	select USB_ARCH_HAS_EHCI if USB_SUPPORT
 	select SYS_SUPPORTS_ZBOOT
 	select SYS_SUPPORTS_ZBOOT_UART16550
 	help

arch/mips/ath79/Kconfig

@@ -74,34 +74,26 @@ config ATH79_MACH_UBNT_XM
 endmenu
 
 config SOC_AR71XX
-	select USB_ARCH_HAS_EHCI
-	select USB_ARCH_HAS_OHCI
 	select HW_HAS_PCI
 	def_bool n
 
 config SOC_AR724X
-	select USB_ARCH_HAS_EHCI
-	select USB_ARCH_HAS_OHCI
 	select HW_HAS_PCI
 	select PCI_AR724X if PCI
 	def_bool n
 
 config SOC_AR913X
-	select USB_ARCH_HAS_EHCI
 	def_bool n
 
 config SOC_AR933X
-	select USB_ARCH_HAS_EHCI
 	def_bool n
 
 config SOC_AR934X
-	select USB_ARCH_HAS_EHCI
 	select HW_HAS_PCI
 	select PCI_AR724X if PCI
 	def_bool n
 
 config SOC_QCA955X
-	select USB_ARCH_HAS_EHCI
 	select HW_HAS_PCI
 	select PCI_AR724X if PCI
 	def_bool n

arch/mips/ralink/Kconfig

@@ -20,19 +20,13 @@ choice
 	config SOC_RT305X
 		bool "RT305x"
 		select USB_ARCH_HAS_HCD
-		select USB_ARCH_HAS_OHCI
-		select USB_ARCH_HAS_EHCI
 
 	config SOC_RT3883
 		bool "RT3883"
-		select USB_ARCH_HAS_OHCI
-		select USB_ARCH_HAS_EHCI
 		select HW_HAS_PCI
 
 	config SOC_MT7620
 		bool "MT7620"
-		select USB_ARCH_HAS_OHCI
-		select USB_ARCH_HAS_EHCI
 
 endchoice
 

arch/powerpc/platforms/44x/Kconfig

@@ -265,7 +265,6 @@ config 440EP
 	select PPC_FPU
 	select IBM440EP_ERR42
 	select IBM_EMAC_ZMII
-	select USB_ARCH_HAS_OHCI
 
 config 440EPX
 	bool

arch/powerpc/platforms/ps3/Kconfig

@@ -2,10 +2,8 @@ config PPC_PS3
 	bool "Sony PS3"
 	depends on PPC64 && PPC_BOOK3S
 	select PPC_CELL
-	select USB_ARCH_HAS_OHCI
 	select USB_OHCI_LITTLE_ENDIAN
 	select USB_OHCI_BIG_ENDIAN_MMIO
-	select USB_ARCH_HAS_EHCI
 	select USB_EHCI_BIG_ENDIAN_MMIO
 	select PPC_PCI_CHOICE
 	help

arch/sh/Kconfig

@@ -356,7 +356,6 @@ config CPU_SUBTYPE_SH7720
 	select CPU_HAS_DSP
 	select SYS_SUPPORTS_CMT
 	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select USB_ARCH_HAS_OHCI
 	select USB_OHCI_SH if USB_OHCI_HCD
 	select PINCTRL
 	help
@@ -367,7 +366,6 @@ config CPU_SUBTYPE_SH7721
 	select CPU_SH3
 	select CPU_HAS_DSP
 	select SYS_SUPPORTS_CMT
-	select USB_ARCH_HAS_OHCI
 	select USB_OHCI_SH if USB_OHCI_HCD
 	help
 	  Select SH7721 if you have a SH3-DSP SH7721 CPU.
@@ -445,8 +443,6 @@ config CPU_SUBTYPE_SH7734
 	select CPU_SH4A
 	select CPU_SHX2
 	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select USB_ARCH_HAS_OHCI
-	select USB_ARCH_HAS_EHCI
 	select PINCTRL
 	help
 	  Select SH7734 if you have a SH4A SH7734 CPU.
@@ -456,8 +452,6 @@ config CPU_SUBTYPE_SH7757
 	select CPU_SH4A
 	select CPU_SHX2
 	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select USB_ARCH_HAS_OHCI
-	select USB_ARCH_HAS_EHCI
 	select PINCTRL
 	help
 	  Select SH7757 if you have a SH4A SH7757 CPU.
@@ -465,7 +459,6 @@ config CPU_SUBTYPE_SH7757
 config CPU_SUBTYPE_SH7763
 	bool "Support SH7763 processor"
 	select CPU_SH4A
-	select USB_ARCH_HAS_OHCI
 	select USB_OHCI_SH if USB_OHCI_HCD
 	help
 	  Select SH7763 if you have a SH4A SH7763(R5S77631) CPU.
@@ -494,9 +487,7 @@ config CPU_SUBTYPE_SH7786
 	select CPU_HAS_PTEAEX
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
 	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select USB_ARCH_HAS_OHCI
 	select USB_OHCI_SH if USB_OHCI_HCD
-	select USB_ARCH_HAS_EHCI
 	select USB_EHCI_SH if USB_EHCI_HCD
 	select PINCTRL