提交 f61e0a35 编写于 作者: S Sreenivasa Honnur 提交者: Jeff Garzik

S2io: Added napi support when MSIX is enabled.

- Added napi support when MSIX is enabled.
- Moved test_msi function from s2io_open to probe function.
Signed-off-by: NSreenivasa Honnur <sreenivasa.honnur@neterion.com>
Signed-off-by: NRamkrishna Vepa <ram.vepa@neterion.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
上级 ac731ab6
......@@ -250,7 +250,7 @@ struct XENA_dev_config {
u64 tx_mat0_n[0x8];
#define TX_MAT_SET(fifo, msi) vBIT(msi, (8 * fifo), 8)
u8 unused_1[0x8];
u64 xmsi_mask_reg;
u64 stat_byte_cnt;
#define STAT_BC(n) vBIT(n,4,12)
......
......@@ -2832,6 +2832,15 @@ static void free_rx_buffers(struct s2io_nic *sp)
}
}
static int s2io_chk_rx_buffers(struct ring_info *ring)
{
if (fill_rx_buffers(ring) == -ENOMEM) {
DBG_PRINT(INFO_DBG, "%s:Out of memory", ring->dev->name);
DBG_PRINT(INFO_DBG, " in Rx Intr!!\n");
}
return 0;
}
/**
* s2io_poll - Rx interrupt handler for NAPI support
* @napi : pointer to the napi structure.
......@@ -2845,57 +2854,72 @@ static void free_rx_buffers(struct s2io_nic *sp)
* 0 on success and 1 if there are No Rx packets to be processed.
*/
static int s2io_poll(struct napi_struct *napi, int budget)
static int s2io_poll_msix(struct napi_struct *napi, int budget)
{
struct s2io_nic *nic = container_of(napi, struct s2io_nic, napi);
struct net_device *dev = nic->dev;
int pkt_cnt = 0, org_pkts_to_process;
struct mac_info *mac_control;
struct ring_info *ring = container_of(napi, struct ring_info, napi);
struct net_device *dev = ring->dev;
struct config_param *config;
struct mac_info *mac_control;
int pkts_processed = 0;
u8 *addr = NULL, val8 = 0;
struct s2io_nic *nic = dev->priv;
struct XENA_dev_config __iomem *bar0 = nic->bar0;
int i;
int budget_org = budget;
mac_control = &nic->mac_control;
config = &nic->config;
mac_control = &nic->mac_control;
nic->pkts_to_process = budget;
org_pkts_to_process = nic->pkts_to_process;
if (unlikely(!is_s2io_card_up(nic)))
return 0;
writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
readl(&bar0->rx_traffic_int);
pkts_processed = rx_intr_handler(ring, budget);
s2io_chk_rx_buffers(ring);
for (i = 0; i < config->rx_ring_num; i++) {
rx_intr_handler(&mac_control->rings[i]);
pkt_cnt = org_pkts_to_process - nic->pkts_to_process;
if (!nic->pkts_to_process) {
/* Quota for the current iteration has been met */
goto no_rx;
}
if (pkts_processed < budget_org) {
netif_rx_complete(dev, napi);
/*Re Enable MSI-Rx Vector*/
addr = (u8 *)&bar0->xmsi_mask_reg;
addr += 7 - ring->ring_no;
val8 = (ring->ring_no == 0) ? 0x3f : 0xbf;
writeb(val8, addr);
val8 = readb(addr);
}
return pkts_processed;
}
static int s2io_poll_inta(struct napi_struct *napi, int budget)
{
struct s2io_nic *nic = container_of(napi, struct s2io_nic, napi);
struct ring_info *ring;
struct net_device *dev = nic->dev;
struct config_param *config;
struct mac_info *mac_control;
int pkts_processed = 0;
int ring_pkts_processed, i;
struct XENA_dev_config __iomem *bar0 = nic->bar0;
int budget_org = budget;
netif_rx_complete(dev, napi);
config = &nic->config;
mac_control = &nic->mac_control;
for (i = 0; i < config->rx_ring_num; i++) {
if (fill_rx_buffers(&mac_control->rings[i]) == -ENOMEM) {
DBG_PRINT(INFO_DBG, "%s:Out of memory", dev->name);
DBG_PRINT(INFO_DBG, " in Rx Poll!!\n");
break;
}
}
/* Re enable the Rx interrupts. */
writeq(0x0, &bar0->rx_traffic_mask);
readl(&bar0->rx_traffic_mask);
return pkt_cnt;
if (unlikely(!is_s2io_card_up(nic)))
return 0;
no_rx:
for (i = 0; i < config->rx_ring_num; i++) {
if (fill_rx_buffers(&mac_control->rings[i]) == -ENOMEM) {
DBG_PRINT(INFO_DBG, "%s:Out of memory", dev->name);
DBG_PRINT(INFO_DBG, " in Rx Poll!!\n");
ring = &mac_control->rings[i];
ring_pkts_processed = rx_intr_handler(ring, budget);
s2io_chk_rx_buffers(ring);
pkts_processed += ring_pkts_processed;
budget -= ring_pkts_processed;
if (budget <= 0)
break;
}
}
return pkt_cnt;
if (pkts_processed < budget_org) {
netif_rx_complete(dev, napi);
/* Re enable the Rx interrupts for the ring */
writeq(0, &bar0->rx_traffic_mask);
readl(&bar0->rx_traffic_mask);
}
return pkts_processed;
}
#ifdef CONFIG_NET_POLL_CONTROLLER
......@@ -2937,7 +2961,7 @@ static void s2io_netpoll(struct net_device *dev)
/* check for received packet and indicate up to network */
for (i = 0; i < config->rx_ring_num; i++)
rx_intr_handler(&mac_control->rings[i]);
rx_intr_handler(&mac_control->rings[i], 0);
for (i = 0; i < config->rx_ring_num; i++) {
if (fill_rx_buffers(&mac_control->rings[i]) == -ENOMEM) {
......@@ -2953,7 +2977,8 @@ static void s2io_netpoll(struct net_device *dev)
/**
* rx_intr_handler - Rx interrupt handler
* @nic: device private variable.
* @ring_info: per ring structure.
* @budget: budget for napi processing.
* Description:
* If the interrupt is because of a received frame or if the
* receive ring contains fresh as yet un-processed frames,this function is
......@@ -2961,15 +2986,15 @@ static void s2io_netpoll(struct net_device *dev)
* stopped and sends the skb to the OSM's Rx handler and then increments
* the offset.
* Return Value:
* NONE.
* No. of napi packets processed.
*/
static void rx_intr_handler(struct ring_info *ring_data)
static int rx_intr_handler(struct ring_info *ring_data, int budget)
{
int get_block, put_block;
struct rx_curr_get_info get_info, put_info;
struct RxD_t *rxdp;
struct sk_buff *skb;
int pkt_cnt = 0;
int pkt_cnt = 0, napi_pkts = 0;
int i;
struct RxD1* rxdp1;
struct RxD3* rxdp3;
......@@ -2996,7 +3021,7 @@ static void rx_intr_handler(struct ring_info *ring_data)
DBG_PRINT(ERR_DBG, "%s: The skb is ",
ring_data->dev->name);
DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
return;
return 0;
}
if (ring_data->rxd_mode == RXD_MODE_1) {
rxdp1 = (struct RxD1*)rxdp;
......@@ -3033,9 +3058,10 @@ static void rx_intr_handler(struct ring_info *ring_data)
rxdp = ring_data->rx_blocks[get_block].block_virt_addr;
}
if(ring_data->nic->config.napi){
ring_data->nic->pkts_to_process -= 1;
if (!ring_data->nic->pkts_to_process)
if (ring_data->nic->config.napi) {
budget--;
napi_pkts++;
if (!budget)
break;
}
pkt_cnt++;
......@@ -3053,6 +3079,7 @@ static void rx_intr_handler(struct ring_info *ring_data)
}
}
}
return(napi_pkts);
}
/**
......@@ -3749,14 +3776,19 @@ static void restore_xmsi_data(struct s2io_nic *nic)
{
struct XENA_dev_config __iomem *bar0 = nic->bar0;
u64 val64;
int i;
int i, msix_index;
if (nic->device_type == XFRAME_I_DEVICE)
return;
for (i=0; i < MAX_REQUESTED_MSI_X; i++) {
msix_index = (i) ? ((i-1) * 8 + 1): 0;
writeq(nic->msix_info[i].addr, &bar0->xmsi_address);
writeq(nic->msix_info[i].data, &bar0->xmsi_data);
val64 = (s2BIT(7) | s2BIT(15) | vBIT(i, 26, 6));
val64 = (s2BIT(7) | s2BIT(15) | vBIT(msix_index, 26, 6));
writeq(val64, &bar0->xmsi_access);
if (wait_for_msix_trans(nic, i)) {
if (wait_for_msix_trans(nic, msix_index)) {
DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__);
continue;
}
......@@ -3767,13 +3799,17 @@ static void store_xmsi_data(struct s2io_nic *nic)
{
struct XENA_dev_config __iomem *bar0 = nic->bar0;
u64 val64, addr, data;
int i;
int i, msix_index;
if (nic->device_type == XFRAME_I_DEVICE)
return;
/* Store and display */
for (i=0; i < MAX_REQUESTED_MSI_X; i++) {
val64 = (s2BIT(15) | vBIT(i, 26, 6));
msix_index = (i) ? ((i-1) * 8 + 1): 0;
val64 = (s2BIT(15) | vBIT(msix_index, 26, 6));
writeq(val64, &bar0->xmsi_access);
if (wait_for_msix_trans(nic, i)) {
if (wait_for_msix_trans(nic, msix_index)) {
DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__);
continue;
}
......@@ -3793,7 +3829,7 @@ static int s2io_enable_msi_x(struct s2io_nic *nic)
u16 msi_control; /* Temp variable */
int ret, i, j, msix_indx = 1;
nic->entries = kcalloc(MAX_REQUESTED_MSI_X, sizeof(struct msix_entry),
nic->entries = kmalloc(nic->num_entries * sizeof(struct msix_entry),
GFP_KERNEL);
if (!nic->entries) {
DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n", \
......@@ -3802,10 +3838,12 @@ static int s2io_enable_msi_x(struct s2io_nic *nic)
return -ENOMEM;
}
nic->mac_control.stats_info->sw_stat.mem_allocated
+= (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
+= (nic->num_entries * sizeof(struct msix_entry));
memset(nic->entries, 0, nic->num_entries * sizeof(struct msix_entry));
nic->s2io_entries =
kcalloc(MAX_REQUESTED_MSI_X, sizeof(struct s2io_msix_entry),
kmalloc(nic->num_entries * sizeof(struct s2io_msix_entry),
GFP_KERNEL);
if (!nic->s2io_entries) {
DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n",
......@@ -3813,11 +3851,13 @@ static int s2io_enable_msi_x(struct s2io_nic *nic)
nic->mac_control.stats_info->sw_stat.mem_alloc_fail_cnt++;
kfree(nic->entries);
nic->mac_control.stats_info->sw_stat.mem_freed
+= (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
+= (nic->num_entries * sizeof(struct msix_entry));
return -ENOMEM;
}
nic->mac_control.stats_info->sw_stat.mem_allocated
+= (MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry));
+= (nic->num_entries * sizeof(struct s2io_msix_entry));
memset(nic->s2io_entries, 0,
nic->num_entries * sizeof(struct s2io_msix_entry));
nic->entries[0].entry = 0;
nic->s2io_entries[0].entry = 0;
......@@ -3825,45 +3865,38 @@ static int s2io_enable_msi_x(struct s2io_nic *nic)
nic->s2io_entries[0].type = MSIX_ALARM_TYPE;
nic->s2io_entries[0].arg = &nic->mac_control.fifos;
for (i = 1; i < MAX_REQUESTED_MSI_X; i++) {
nic->entries[i].entry = i;
nic->s2io_entries[i].entry = i;
for (i = 1; i < nic->num_entries; i++) {
nic->entries[i].entry = ((i - 1) * 8) + 1;
nic->s2io_entries[i].entry = ((i - 1) * 8) + 1;
nic->s2io_entries[i].arg = NULL;
nic->s2io_entries[i].in_use = 0;
}
rx_mat = readq(&bar0->rx_mat);
for (j = 0; j < nic->config.rx_ring_num; j++, msix_indx++) {
for (j = 0; j < nic->config.rx_ring_num; j++) {
rx_mat |= RX_MAT_SET(j, msix_indx);
nic->s2io_entries[msix_indx].arg
= &nic->mac_control.rings[j];
nic->s2io_entries[msix_indx].type = MSIX_RING_TYPE;
nic->s2io_entries[msix_indx].in_use = MSIX_FLG;
nic->s2io_entries[j+1].arg = &nic->mac_control.rings[j];
nic->s2io_entries[j+1].type = MSIX_RING_TYPE;
nic->s2io_entries[j+1].in_use = MSIX_FLG;
msix_indx += 8;
}
writeq(rx_mat, &bar0->rx_mat);
readq(&bar0->rx_mat);
nic->avail_msix_vectors = 0;
ret = pci_enable_msix(nic->pdev, nic->entries, MAX_REQUESTED_MSI_X);
ret = pci_enable_msix(nic->pdev, nic->entries, nic->num_entries);
/* We fail init if error or we get less vectors than min required */
if (ret >= (nic->config.tx_fifo_num + nic->config.rx_ring_num + 1)) {
nic->avail_msix_vectors = ret;
ret = pci_enable_msix(nic->pdev, nic->entries, ret);
}
if (ret) {
DBG_PRINT(ERR_DBG, "%s: Enabling MSIX failed\n", nic->dev->name);
kfree(nic->entries);
nic->mac_control.stats_info->sw_stat.mem_freed
+= (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
+= (nic->num_entries * sizeof(struct msix_entry));
kfree(nic->s2io_entries);
nic->mac_control.stats_info->sw_stat.mem_freed
+= (MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry));
+= (nic->num_entries * sizeof(struct s2io_msix_entry));
nic->entries = NULL;
nic->s2io_entries = NULL;
nic->avail_msix_vectors = 0;
return -ENOMEM;
}
if (!nic->avail_msix_vectors)
nic->avail_msix_vectors = MAX_REQUESTED_MSI_X;
/*
* To enable MSI-X, MSI also needs to be enabled, due to a bug
......@@ -3935,7 +3968,7 @@ static void remove_msix_isr(struct s2io_nic *sp)
int i;
u16 msi_control;
for (i = 0; i < MAX_REQUESTED_MSI_X; i++) {
for (i = 0; i < sp->num_entries; i++) {
if (sp->s2io_entries[i].in_use ==
MSIX_REGISTERED_SUCCESS) {
int vector = sp->entries[i].vector;
......@@ -3991,29 +4024,6 @@ static int s2io_open(struct net_device *dev)
netif_carrier_off(dev);
sp->last_link_state = 0;
if (sp->config.intr_type == MSI_X) {
int ret = s2io_enable_msi_x(sp);
if (!ret) {
ret = s2io_test_msi(sp);
/* rollback MSI-X, will re-enable during add_isr() */
remove_msix_isr(sp);
}
if (ret) {
DBG_PRINT(ERR_DBG,
"%s: MSI-X requested but failed to enable\n",
dev->name);
sp->config.intr_type = INTA;
}
}
/* NAPI doesn't work well with MSI(X) */
if (sp->config.intr_type != INTA) {
if(sp->config.napi)
sp->config.napi = 0;
}
/* Initialize H/W and enable interrupts */
err = s2io_card_up(sp);
if (err) {
......@@ -4036,12 +4046,12 @@ static int s2io_open(struct net_device *dev)
if (sp->entries) {
kfree(sp->entries);
sp->mac_control.stats_info->sw_stat.mem_freed
+= (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
+= (sp->num_entries * sizeof(struct msix_entry));
}
if (sp->s2io_entries) {
kfree(sp->s2io_entries);
sp->mac_control.stats_info->sw_stat.mem_freed
+= (MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry));
+= (sp->num_entries * sizeof(struct s2io_msix_entry));
}
}
return err;
......@@ -4343,25 +4353,29 @@ s2io_alarm_handle(unsigned long data)
mod_timer(&sp->alarm_timer, jiffies + HZ / 2);
}
static int s2io_chk_rx_buffers(struct ring_info *ring)
{
if (fill_rx_buffers(ring) == -ENOMEM) {
DBG_PRINT(INFO_DBG, "%s:Out of memory", ring->dev->name);
DBG_PRINT(INFO_DBG, " in Rx Intr!!\n");
}
return 0;
}
static irqreturn_t s2io_msix_ring_handle(int irq, void *dev_id)
{
struct ring_info *ring = (struct ring_info *)dev_id;
struct s2io_nic *sp = ring->nic;
struct XENA_dev_config __iomem *bar0 = sp->bar0;
struct net_device *dev = sp->dev;
if (!is_s2io_card_up(sp))
if (unlikely(!is_s2io_card_up(sp)))
return IRQ_HANDLED;
rx_intr_handler(ring);
s2io_chk_rx_buffers(ring);
if (sp->config.napi) {
u8 *addr = NULL, val8 = 0;
addr = (u8 *)&bar0->xmsi_mask_reg;
addr += (7 - ring->ring_no);
val8 = (ring->ring_no == 0) ? 0x7f : 0xff;
writeb(val8, addr);
val8 = readb(addr);
netif_rx_schedule(dev, &ring->napi);
} else {
rx_intr_handler(ring, 0);
s2io_chk_rx_buffers(ring);
}
return IRQ_HANDLED;
}
......@@ -4798,14 +4812,10 @@ static irqreturn_t s2io_isr(int irq, void *dev_id)
if (config->napi) {
if (reason & GEN_INTR_RXTRAFFIC) {
if (likely(netif_rx_schedule_prep(dev,
&sp->napi))) {
__netif_rx_schedule(dev, &sp->napi);
writeq(S2IO_MINUS_ONE,
&bar0->rx_traffic_mask);
} else
writeq(S2IO_MINUS_ONE,
&bar0->rx_traffic_int);
netif_rx_schedule(dev, &sp->napi);
writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_mask);
writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
readl(&bar0->rx_traffic_int);
}
} else {
/*
......@@ -4817,7 +4827,7 @@ static irqreturn_t s2io_isr(int irq, void *dev_id)
writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
for (i = 0; i < config->rx_ring_num; i++)
rx_intr_handler(&mac_control->rings[i]);
rx_intr_handler(&mac_control->rings[i], 0);
}
/*
......@@ -7022,8 +7032,9 @@ static int s2io_add_isr(struct s2io_nic * sp)
if (sp->config.intr_type == MSI_X) {
int i, msix_rx_cnt = 0;
for (i = 0; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) {
if (sp->s2io_entries[i].type ==
for (i = 0; i < sp->num_entries; i++) {
if (sp->s2io_entries[i].in_use == MSIX_FLG) {
if (sp->s2io_entries[i].type ==
MSIX_RING_TYPE) {
sprintf(sp->desc[i], "%s:MSI-X-%d-RX",
dev->name, i);
......@@ -7068,7 +7079,7 @@ static int s2io_add_isr(struct s2io_nic * sp)
}
sp->s2io_entries[i].in_use =
MSIX_REGISTERED_SUCCESS;
}
}
if (!err) {
printk(KERN_INFO "MSI-X-RX %d entries enabled\n",
......@@ -7115,8 +7126,15 @@ static void do_s2io_card_down(struct s2io_nic * sp, int do_io)
clear_bit(__S2IO_STATE_CARD_UP, &sp->state);
/* Disable napi */
if (config->napi)
napi_disable(&sp->napi);
if (sp->config.napi) {
int off = 0;
if (config->intr_type == MSI_X) {
for (; off < sp->config.rx_ring_num; off++)
napi_disable(&sp->mac_control.rings[off].napi);
}
else
napi_disable(&sp->napi);
}
/* disable Tx and Rx traffic on the NIC */
if (do_io)
......@@ -7208,8 +7226,15 @@ static int s2io_card_up(struct s2io_nic * sp)
}
/* Initialise napi */
if (config->napi)
napi_enable(&sp->napi);
if (config->napi) {
int i;
if (config->intr_type == MSI_X) {
for (i = 0; i < sp->config.rx_ring_num; i++)
napi_enable(&sp->mac_control.rings[i].napi);
} else {
napi_enable(&sp->napi);
}
}
/* Maintain the state prior to the open */
if (sp->promisc_flg)
......@@ -7650,9 +7675,6 @@ static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type,
rx_ring_num = MAX_RX_RINGS;
}
if (*dev_intr_type != INTA)
napi = 0;
if ((*dev_intr_type != INTA) && (*dev_intr_type != MSI_X)) {
DBG_PRINT(ERR_DBG, "s2io: Wrong intr_type requested. "
"Defaulting to INTA\n");
......@@ -7953,8 +7975,6 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
* will use eth_mac_addr() for dev->set_mac_address
* mac address will be set every time dev->open() is called
*/
netif_napi_add(dev, &sp->napi, s2io_poll, 32);
#ifdef CONFIG_NET_POLL_CONTROLLER
dev->poll_controller = s2io_netpoll;
#endif
......@@ -7998,6 +8018,32 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
}
}
if (sp->config.intr_type == MSI_X) {
sp->num_entries = config->rx_ring_num + 1;
ret = s2io_enable_msi_x(sp);
if (!ret) {
ret = s2io_test_msi(sp);
/* rollback MSI-X, will re-enable during add_isr() */
remove_msix_isr(sp);
}
if (ret) {
DBG_PRINT(ERR_DBG,
"%s: MSI-X requested but failed to enable\n",
dev->name);
sp->config.intr_type = INTA;
}
}
if (config->intr_type == MSI_X) {
for (i = 0; i < config->rx_ring_num ; i++)
netif_napi_add(dev, &mac_control->rings[i].napi,
s2io_poll_msix, 64);
} else {
netif_napi_add(dev, &sp->napi, s2io_poll_inta, 64);
}
/* Not needed for Herc */
if (sp->device_type & XFRAME_I_DEVICE) {
/*
......@@ -8048,6 +8094,11 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
/* store mac addresses from CAM to s2io_nic structure */
do_s2io_store_unicast_mc(sp);
/* Configure MSIX vector for number of rings configured plus one */
if ((sp->device_type == XFRAME_II_DEVICE) &&
(config->intr_type == MSI_X))
sp->num_entries = config->rx_ring_num + 1;
/* Store the values of the MSIX table in the s2io_nic structure */
store_xmsi_data(sp);
/* reset Nic and bring it to known state */
......@@ -8113,8 +8164,14 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
break;
}
if (napi)
switch (sp->config.napi) {
case 0:
DBG_PRINT(ERR_DBG, "%s: NAPI disabled\n", dev->name);
break;
case 1:
DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name);
break;
}
DBG_PRINT(ERR_DBG, "%s: Using %d Tx fifo(s)\n", dev->name,
sp->config.tx_fifo_num);
......
......@@ -706,7 +706,7 @@ struct ring_info {
/* per-ring buffer counter */
u32 rx_bufs_left;
#define MAX_LRO_SESSIONS 32
#define MAX_LRO_SESSIONS 32
struct lro lro0_n[MAX_LRO_SESSIONS];
u8 lro;
......@@ -725,6 +725,11 @@ struct ring_info {
/* copy of sp->pdev pointer */
struct pci_dev *pdev;
/* Per ring napi struct */
struct napi_struct napi;
unsigned long interrupt_count;
/*
* Place holders for the virtual and physical addresses of
* all the Rx Blocks
......@@ -841,7 +846,7 @@ struct usr_addr {
* Structure to keep track of the MSI-X vectors and the corresponding
* argument registered against each vector
*/
#define MAX_REQUESTED_MSI_X 17
#define MAX_REQUESTED_MSI_X 9
struct s2io_msix_entry
{
u16 vector;
......@@ -877,7 +882,6 @@ struct s2io_nic {
*/
int pkts_to_process;
struct net_device *dev;
struct napi_struct napi;
struct mac_info mac_control;
struct config_param config;
struct pci_dev *pdev;
......@@ -948,6 +952,7 @@ struct s2io_nic {
*/
u8 other_fifo_idx;
struct napi_struct napi;
/* after blink, the adapter must be restored with original
* values.
*/
......@@ -962,6 +967,7 @@ struct s2io_nic {
unsigned long long start_time;
struct vlan_group *vlgrp;
#define MSIX_FLG 0xA5
int num_entries;
struct msix_entry *entries;
int msi_detected;
wait_queue_head_t msi_wait;
......@@ -1104,7 +1110,7 @@ static void __devexit s2io_rem_nic(struct pci_dev *pdev);
static int init_shared_mem(struct s2io_nic *sp);
static void free_shared_mem(struct s2io_nic *sp);
static int init_nic(struct s2io_nic *nic);
static void rx_intr_handler(struct ring_info *ring_data);
static int rx_intr_handler(struct ring_info *ring_data, int budget);
static void tx_intr_handler(struct fifo_info *fifo_data);
static void s2io_handle_errors(void * dev_id);
......@@ -1115,7 +1121,8 @@ static void s2io_set_multicast(struct net_device *dev);
static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp);
static void s2io_link(struct s2io_nic * sp, int link);
static void s2io_reset(struct s2io_nic * sp);
static int s2io_poll(struct napi_struct *napi, int budget);
static int s2io_poll_msix(struct napi_struct *napi, int budget);
static int s2io_poll_inta(struct napi_struct *napi, int budget);
static void s2io_init_pci(struct s2io_nic * sp);
static int do_s2io_prog_unicast(struct net_device *dev, u8 *addr);
static void s2io_alarm_handle(unsigned long data);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册