提交 f5ce0466 编写于 作者: L Linus Torvalds

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:

 - Halve maximum number of CPUs if DEBUG_KMAP_LOCAL is enabled

 - Fix conversion for_each_membock() to for_each_mem_range()

 - Fix footbridge PCI mapping

 - Avoid uprobes hooking on thumb instructions

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9071/1: uprobes: Don't hook on thumb instructions
  ARM: footbridge: fix PCI interrupt mapping
  ARM: 9069/1: NOMMU: Fix conversion for_each_membock() to for_each_mem_range()
  ARM: 9063/1: mm: reduce maximum number of CPUs if DEBUG_KMAP_LOCAL is enabled
......@@ -1293,9 +1293,15 @@ config KASAN_SHADOW_OFFSET
config NR_CPUS
int "Maximum number of CPUs (2-32)"
range 2 32
range 2 16 if DEBUG_KMAP_LOCAL
range 2 32 if !DEBUG_KMAP_LOCAL
depends on SMP
default "4"
help
The maximum number of CPUs that the kernel can support.
Up to 32 CPUs can be supported, or up to 16 if kmap_local()
debugging is enabled, which uses half of the per-CPU fixmap
slots as guard regions.
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs"
......
......@@ -15,14 +15,14 @@
#include <asm/mach-types.h>
/* cats host-specific stuff */
static int irqmap_cats[] __initdata = { IRQ_PCI, IRQ_IN0, IRQ_IN1, IRQ_IN3 };
static int irqmap_cats[] = { IRQ_PCI, IRQ_IN0, IRQ_IN1, IRQ_IN3 };
static u8 cats_no_swizzle(struct pci_dev *dev, u8 *pin)
{
return 0;
}
static int __init cats_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
static int cats_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
if (dev->irq >= 255)
return -1; /* not a valid interrupt. */
......
......@@ -14,9 +14,9 @@
#include <asm/mach/pci.h>
#include <asm/mach-types.h>
static int irqmap_ebsa285[] __initdata = { IRQ_IN3, IRQ_IN1, IRQ_IN0, IRQ_PCI };
static int irqmap_ebsa285[] = { IRQ_IN3, IRQ_IN1, IRQ_IN0, IRQ_PCI };
static int __init ebsa285_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
static int ebsa285_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
if (dev->vendor == PCI_VENDOR_ID_CONTAQ &&
dev->device == PCI_DEVICE_ID_CONTAQ_82C693)
......
......@@ -18,7 +18,7 @@
* We now use the slot ID instead of the device identifiers to select
* which interrupt is routed where.
*/
static int __init netwinder_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
static int netwinder_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
switch (slot) {
case 0: /* host bridge */
......
......@@ -14,13 +14,12 @@
#include <asm/mach/pci.h>
#include <asm/mach-types.h>
static int irqmap_personal_server[] __initdata = {
static int irqmap_personal_server[] = {
IRQ_IN0, IRQ_IN1, IRQ_IN2, IRQ_IN3, 0, 0, 0,
IRQ_DOORBELLHOST, IRQ_DMA1, IRQ_DMA2, IRQ_PCI
};
static int __init personal_server_map_irq(const struct pci_dev *dev, u8 slot,
u8 pin)
static int personal_server_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
unsigned char line;
......
......@@ -387,8 +387,7 @@ void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot)
pte_t *pte = pte_offset_fixmap(pmd_off_k(vaddr), vaddr);
/* Make sure fixmap region does not exceed available allocation. */
BUILD_BUG_ON(FIXADDR_START + (__end_of_fixed_addresses * PAGE_SIZE) >
FIXADDR_END);
BUILD_BUG_ON(__fix_to_virt(__end_of_fixed_addresses) < FIXADDR_START);
BUG_ON(idx >= __end_of_fixed_addresses);
/* we only support device mappings until pgprot_kernel has been set */
......
......@@ -235,6 +235,7 @@ void __init pmsav7_adjust_lowmem_bounds(void)
phys_addr_t mem_end;
phys_addr_t reg_start, reg_end;
unsigned int mem_max_regions;
bool first = true;
int num;
u64 i;
......@@ -263,7 +264,7 @@ void __init pmsav7_adjust_lowmem_bounds(void)
#endif
for_each_mem_range(i, &reg_start, &reg_end) {
if (i == 0) {
if (first) {
phys_addr_t phys_offset = PHYS_OFFSET;
/*
......@@ -275,6 +276,7 @@ void __init pmsav7_adjust_lowmem_bounds(void)
mem_start = reg_start;
mem_end = reg_end;
specified_mem_size = mem_end - mem_start;
first = false;
} else {
/*
* memblock auto merges contiguous blocks, remove
......
......@@ -95,10 +95,11 @@ void __init pmsav8_adjust_lowmem_bounds(void)
{
phys_addr_t mem_end;
phys_addr_t reg_start, reg_end;
bool first = true;
u64 i;
for_each_mem_range(i, &reg_start, &reg_end) {
if (i == 0) {
if (first) {
phys_addr_t phys_offset = PHYS_OFFSET;
/*
......@@ -107,6 +108,7 @@ void __init pmsav8_adjust_lowmem_bounds(void)
if (reg_start != phys_offset)
panic("First memory bank must be contiguous from PHYS_OFFSET");
mem_end = reg_end;
first = false;
} else {
/*
* memblock auto merges contiguous blocks, remove
......
......@@ -204,7 +204,7 @@ unsigned long uprobe_get_swbp_addr(struct pt_regs *regs)
static struct undef_hook uprobes_arm_break_hook = {
.instr_mask = 0x0fffffff,
.instr_val = (UPROBE_SWBP_ARM_INSN & 0x0fffffff),
.cpsr_mask = MODE_MASK,
.cpsr_mask = (PSR_T_BIT | MODE_MASK),
.cpsr_val = USR_MODE,
.fn = uprobe_trap_handler,
};
......@@ -212,7 +212,7 @@ static struct undef_hook uprobes_arm_break_hook = {
static struct undef_hook uprobes_arm_ss_hook = {
.instr_mask = 0x0fffffff,
.instr_val = (UPROBE_SS_ARM_INSN & 0x0fffffff),
.cpsr_mask = MODE_MASK,
.cpsr_mask = (PSR_T_BIT | MODE_MASK),
.cpsr_val = USR_MODE,
.fn = uprobe_trap_handler,
};
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册