Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 f55be1bf 编写于 作者: L Linus Walleij 提交者： Russell King
浏览文件
操作

ARM: 7104/1: plat-pxa: break out GPIO driver specifics 

The <mach/gpio.h> file is included from upper directories
and deal with generic GPIO and gpiolib stuff. Break out the
platform and driver specific defines and functions into its own
header file.

Cc: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
上级 354bf801
隐藏空白更改
内联 并排
Showing with 227 addition and 180 deletion
arch/arm/mach-mmp/aspenite.c
浏览文件 @ f55be1bf
......@@ -17,6 +17,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
......
arch/arm/mach-mmp/brownstone.c
浏览文件 @ f55be1bf
......@@ -14,7 +14,6 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/max8649.h>
#include <linux/regulator/fixed.h>
......
arch/arm/mach-mmp/gplugd.c
浏览文件 @ f55be1bf
......@@ -9,11 +9,11 @@
*/
#include <linux/init.h>
#include <linux/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/gpio.h>
#include <mach/pxa168.h>
#include <mach/mfp-pxa168.h>
#include <mach/mfp-gplugd.h>
......
arch/arm/mach-mmp/include/mach/gpio-pxa.h 0 → 100644
浏览文件 @ f55be1bf
#ifndef __ASM_MACH_GPIO_PXA_H
#define __ASM_MACH_GPIO_PXA_H
#include <mach/addr-map.h>
#include <mach/irqs.h>
#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000)
#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
#define GPIO_REG(x) (*((volatile u32 *)(GPIO_REGS_VIRT + (x))))
#define NR_BUILTIN_GPIO IRQ_GPIO_NUM
#define gpio_to_bank(gpio) ((gpio) >> 5)
/* NOTE: these macros are defined here to make optimization of
* gpio_{get,set}_value() to work when 'gpio' is a constant.
* Usage of these macros otherwise is no longer recommended,
* use generic GPIO API whenever possible.
*/
#define GPIO_bit(gpio) (1 << ((gpio) & 0x1f))
#define GPLR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00)
#define GPDR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c)
#define GPSR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18)
#define GPCR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24)
#include <plat/gpio-pxa.h>
#endif /* __ASM_MACH_GPIO_PXA_H */
arch/arm/mach-mmp/include/mach/gpio.h
浏览文件 @ f55be1bf
#ifndef __ASM_MACH_GPIO_H
#define __ASM_MACH_GPIO_H
#include <mach/addr-map.h>
#include <mach/irqs.h>
#include <asm-generic/gpio.h>
#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000)
#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
#define GPIO_REG(x) (*((volatile u32 *)(GPIO_REGS_VIRT + (x))))
#define NR_BUILTIN_GPIO IRQ_GPIO_NUM
#define gpio_to_bank(gpio) ((gpio) >> 5)
#define gpio_to_irq(gpio) (IRQ_GPIO_START + (gpio))
#define irq_to_gpio(irq) ((irq) - IRQ_GPIO_START)
#define __gpio_is_inverted(gpio) (0)
#define __gpio_is_occupied(gpio) (0)
/* NOTE: these macros are defined here to make optimization of
* gpio_{get,set}_value() to work when 'gpio' is a constant.
* Usage of these macros otherwise is no longer recommended,
* use generic GPIO API whenever possible.
*/
#define GPIO_bit(gpio) (1 << ((gpio) & 0x1f))
#define GPLR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00)
#define GPDR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c)
#define GPSR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18)
#define GPCR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24)
#include <plat/gpio.h>
#endif /* __ASM_MACH_GPIO_H */
arch/arm/mach-mmp/jasper.c
浏览文件 @ f55be1bf
......@@ -14,7 +14,6 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/max8649.h>
#include <linux/mfd/max8925.h>
......
arch/arm/mach-mmp/mmp2.c
浏览文件 @ f55be1bf
......@@ -9,7 +9,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
......@@ -25,6 +24,7 @@
#include <mach/irqs.h>
#include <mach/dma.h>
#include <mach/mfp.h>
#include <mach/gpio-pxa.h>
#include <mach/devices.h>
#include <mach/mmp2.h>
......
arch/arm/mach-mmp/pxa168.c
浏览文件 @ f55be1bf
......@@ -7,7 +7,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
......@@ -21,6 +20,7 @@
#include <mach/regs-apbc.h>
#include <mach/regs-apmu.h>
#include <mach/irqs.h>
#include <mach/gpio-pxa.h>
#include <mach/dma.h>
#include <mach/devices.h>
#include <mach/mfp.h>
......
arch/arm/mach-mmp/pxa910.c
浏览文件 @ f55be1bf
......@@ -7,7 +7,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
......@@ -20,6 +19,7 @@
#include <mach/regs-apmu.h>
#include <mach/cputype.h>
#include <mach/irqs.h>
#include <mach/gpio-pxa.h>
#include <mach/dma.h>
#include <mach/mfp.h>
#include <mach/devices.h>
......
arch/arm/mach-mmp/tavorevb.c
浏览文件 @ f55be1bf
......@@ -12,6 +12,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/smc91x.h>
#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
......
arch/arm/mach-pxa/cm-x255.c
浏览文件 @ f55be1bf
......@@ -11,7 +11,6 @@
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/nand-gpio.h>
......
arch/arm/mach-pxa/include/mach/gpio-pxa.h 0 → 100644
浏览文件 @ f55be1bf
/*
* Written by Philipp Zabel <philipp.zabel@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#ifndef __MACH_PXA_GPIO_PXA_H
#define __MACH_PXA_GPIO_PXA_H
#include <mach/irqs.h>
#include <mach/hardware.h>
#define GPIO_REGS_VIRT io_p2v(0x40E00000)
#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
/* GPIO Pin Level Registers */
#define GPLR0 GPIO_REG(BANK_OFF(0) + 0x00)
#define GPLR1 GPIO_REG(BANK_OFF(1) + 0x00)
#define GPLR2 GPIO_REG(BANK_OFF(2) + 0x00)
#define GPLR3 GPIO_REG(BANK_OFF(3) + 0x00)
/* GPIO Pin Direction Registers */
#define GPDR0 GPIO_REG(BANK_OFF(0) + 0x0c)
#define GPDR1 GPIO_REG(BANK_OFF(1) + 0x0c)
#define GPDR2 GPIO_REG(BANK_OFF(2) + 0x0c)
#define GPDR3 GPIO_REG(BANK_OFF(3) + 0x0c)
/* GPIO Pin Output Set Registers */
#define GPSR0 GPIO_REG(BANK_OFF(0) + 0x18)
#define GPSR1 GPIO_REG(BANK_OFF(1) + 0x18)
#define GPSR2 GPIO_REG(BANK_OFF(2) + 0x18)
#define GPSR3 GPIO_REG(BANK_OFF(3) + 0x18)
/* GPIO Pin Output Clear Registers */
#define GPCR0 GPIO_REG(BANK_OFF(0) + 0x24)
#define GPCR1 GPIO_REG(BANK_OFF(1) + 0x24)
#define GPCR2 GPIO_REG(BANK_OFF(2) + 0x24)
#define GPCR3 GPIO_REG(BANK_OFF(3) + 0x24)
/* GPIO Rising Edge Detect Registers */
#define GRER0 GPIO_REG(BANK_OFF(0) + 0x30)
#define GRER1 GPIO_REG(BANK_OFF(1) + 0x30)
#define GRER2 GPIO_REG(BANK_OFF(2) + 0x30)
#define GRER3 GPIO_REG(BANK_OFF(3) + 0x30)
/* GPIO Falling Edge Detect Registers */
#define GFER0 GPIO_REG(BANK_OFF(0) + 0x3c)
#define GFER1 GPIO_REG(BANK_OFF(1) + 0x3c)
#define GFER2 GPIO_REG(BANK_OFF(2) + 0x3c)
#define GFER3 GPIO_REG(BANK_OFF(3) + 0x3c)
/* GPIO Edge Detect Status Registers */
#define GEDR0 GPIO_REG(BANK_OFF(0) + 0x48)
#define GEDR1 GPIO_REG(BANK_OFF(1) + 0x48)
#define GEDR2 GPIO_REG(BANK_OFF(2) + 0x48)
#define GEDR3 GPIO_REG(BANK_OFF(3) + 0x48)
/* GPIO Alternate Function Select Registers */
#define GAFR0_L GPIO_REG(0x0054)
#define GAFR0_U GPIO_REG(0x0058)
#define GAFR1_L GPIO_REG(0x005C)
#define GAFR1_U GPIO_REG(0x0060)
#define GAFR2_L GPIO_REG(0x0064)
#define GAFR2_U GPIO_REG(0x0068)
#define GAFR3_L GPIO_REG(0x006C)
#define GAFR3_U GPIO_REG(0x0070)
/* More handy macros. The argument is a literal GPIO number. */
#define GPIO_bit(x) (1 << ((x) & 0x1f))
#define GPLR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x00)
#define GPDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x0c)
#define GPSR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x18)
#define GPCR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x24)
#define GRER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x30)
#define GFER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x3c)
#define GEDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x48)
#define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2))
#define NR_BUILTIN_GPIO PXA_GPIO_IRQ_NUM
#define gpio_to_bank(gpio) ((gpio) >> 5)
#ifdef CONFIG_CPU_PXA26x
/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
* as well as their Alternate Function value being '1' for GPIO in GAFRx.
*/
static inline int __gpio_is_inverted(unsigned gpio)
{
return cpu_is_pxa25x() && gpio > 85;
}
#else
static inline int __gpio_is_inverted(unsigned gpio) { return 0; }
#endif
/*
* On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate
* function of a GPIO, and GPDRx cannot be altered once configured. It
* is attributed as "occupied" here (I know this terminology isn't
* accurate, you are welcome to propose a better one :-)
*/
static inline int __gpio_is_occupied(unsigned gpio)
{
if (cpu_is_pxa27x() || cpu_is_pxa25x()) {
int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3;
int dir = GPDR(gpio) & GPIO_bit(gpio);
if (__gpio_is_inverted(gpio))
return af != 1 || dir == 0;
else
return af != 0 || dir != 0;
} else
return GPDR(gpio) & GPIO_bit(gpio);
}
#include <plat/gpio-pxa.h>
#endif /* __MACH_PXA_GPIO_PXA_H */
arch/arm/mach-pxa/include/mach/gpio.h
浏览文件 @ f55be1bf
......@@ -24,84 +24,10 @@
#ifndef __ASM_ARCH_PXA_GPIO_H
#define __ASM_ARCH_PXA_GPIO_H
#include <mach/irqs.h>
#include <mach/hardware.h>
#include <asm-generic/gpio.h>
/* The defines for the driver are needed for the accelerated accessors */
#include "gpio-pxa.h"
#define GPIO_REGS_VIRT io_p2v(0x40E00000)
#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
/* GPIO Pin Level Registers */
#define GPLR0 GPIO_REG(BANK_OFF(0) + 0x00)
#define GPLR1 GPIO_REG(BANK_OFF(1) + 0x00)
#define GPLR2 GPIO_REG(BANK_OFF(2) + 0x00)
#define GPLR3 GPIO_REG(BANK_OFF(3) + 0x00)
/* GPIO Pin Direction Registers */
#define GPDR0 GPIO_REG(BANK_OFF(0) + 0x0c)
#define GPDR1 GPIO_REG(BANK_OFF(1) + 0x0c)
#define GPDR2 GPIO_REG(BANK_OFF(2) + 0x0c)
#define GPDR3 GPIO_REG(BANK_OFF(3) + 0x0c)
/* GPIO Pin Output Set Registers */
#define GPSR0 GPIO_REG(BANK_OFF(0) + 0x18)
#define GPSR1 GPIO_REG(BANK_OFF(1) + 0x18)
#define GPSR2 GPIO_REG(BANK_OFF(2) + 0x18)
#define GPSR3 GPIO_REG(BANK_OFF(3) + 0x18)
/* GPIO Pin Output Clear Registers */
#define GPCR0 GPIO_REG(BANK_OFF(0) + 0x24)
#define GPCR1 GPIO_REG(BANK_OFF(1) + 0x24)
#define GPCR2 GPIO_REG(BANK_OFF(2) + 0x24)
#define GPCR3 GPIO_REG(BANK_OFF(3) + 0x24)
/* GPIO Rising Edge Detect Registers */
#define GRER0 GPIO_REG(BANK_OFF(0) + 0x30)
#define GRER1 GPIO_REG(BANK_OFF(1) + 0x30)
#define GRER2 GPIO_REG(BANK_OFF(2) + 0x30)
#define GRER3 GPIO_REG(BANK_OFF(3) + 0x30)
/* GPIO Falling Edge Detect Registers */
#define GFER0 GPIO_REG(BANK_OFF(0) + 0x3c)
#define GFER1 GPIO_REG(BANK_OFF(1) + 0x3c)
#define GFER2 GPIO_REG(BANK_OFF(2) + 0x3c)
#define GFER3 GPIO_REG(BANK_OFF(3) + 0x3c)
/* GPIO Edge Detect Status Registers */
#define GEDR0 GPIO_REG(BANK_OFF(0) + 0x48)
#define GEDR1 GPIO_REG(BANK_OFF(1) + 0x48)
#define GEDR2 GPIO_REG(BANK_OFF(2) + 0x48)
#define GEDR3 GPIO_REG(BANK_OFF(3) + 0x48)
/* GPIO Alternate Function Select Registers */
#define GAFR0_L GPIO_REG(0x0054)
#define GAFR0_U GPIO_REG(0x0058)
#define GAFR1_L GPIO_REG(0x005C)
#define GAFR1_U GPIO_REG(0x0060)
#define GAFR2_L GPIO_REG(0x0064)
#define GAFR2_U GPIO_REG(0x0068)
#define GAFR3_L GPIO_REG(0x006C)
#define GAFR3_U GPIO_REG(0x0070)
/* More handy macros. The argument is a literal GPIO number. */
#define GPIO_bit(x) (1 << ((x) & 0x1f))
#define GPLR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x00)
#define GPDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x0c)
#define GPSR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x18)
#define GPCR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x24)
#define GRER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x30)
#define GFER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x3c)
#define GEDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x48)
#define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2))
#define NR_BUILTIN_GPIO PXA_GPIO_IRQ_NUM
#define gpio_to_bank(gpio) ((gpio) >> 5)
#define gpio_to_irq(gpio) IRQ_GPIO(gpio)
static inline int irq_to_gpio(unsigned int irq)
......@@ -118,37 +44,5 @@ static inline int irq_to_gpio(unsigned int irq)
return -1;
}
#ifdef CONFIG_CPU_PXA26x
/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
* as well as their Alternate Function value being '1' for GPIO in GAFRx.
*/
static inline int __gpio_is_inverted(unsigned gpio)
{
return cpu_is_pxa25x() && gpio > 85;
}
#else
static inline int __gpio_is_inverted(unsigned gpio) { return 0; }
#endif
/*
* On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate
* function of a GPIO, and GPDRx cannot be altered once configured. It
* is attributed as "occupied" here (I know this terminology isn't
* accurate, you are welcome to propose a better one :-)
*/
static inline int __gpio_is_occupied(unsigned gpio)
{
if (cpu_is_pxa27x() || cpu_is_pxa25x()) {
int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3;
int dir = GPDR(gpio) & GPIO_bit(gpio);
if (__gpio_is_inverted(gpio))
return af != 1 || dir == 0;
else
return af != 0 || dir != 0;
} else
return GPDR(gpio) & GPIO_bit(gpio);
}
#include <plat/gpio.h>
#endif
arch/arm/mach-pxa/include/mach/littleton.h
浏览文件 @ f55be1bf
#ifndef __ASM_ARCH_LITTLETON_H
#define __ASM_ARCH_LITTLETON_H
#include <asm/gpio.h>
#include <mach/gpio-pxa.h>
#define LITTLETON_ETH_PHYS 0x30000000
......
arch/arm/mach-pxa/irq.c
浏览文件 @ f55be1bf
......@@ -11,7 +11,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
......@@ -21,6 +20,7 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/gpio-pxa.h>
#include "generic.h"
......
arch/arm/mach-pxa/mfp-pxa2xx.c
浏览文件 @ f55be1bf
......@@ -20,6 +20,7 @@
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa2xx.h>
#include <mach/gpio-pxa.h>
#include "generic.h"
......
arch/arm/mach-pxa/pxa25x.c
浏览文件 @ f55be1bf
......@@ -24,6 +24,7 @@
#include <linux/suspend.h>
#include <linux/syscore_ops.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <asm/mach/map.h>
#include <asm/suspend.h>
......
arch/arm/mach-pxa/pxa27x.c
浏览文件 @ f55be1bf
......@@ -21,6 +21,7 @@
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/gpio.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
......
arch/arm/mach-pxa/pxa3xx.c
浏览文件 @ f55be1bf
......@@ -12,7 +12,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
......@@ -26,6 +25,7 @@
#include <asm/mach/map.h>
#include <asm/suspend.h>
#include <mach/hardware.h>
#include <mach/gpio-pxa.h>
#include <mach/pxa3xx-regs.h>
#include <mach/reset.h>
#include <mach/ohci.h>
......
arch/arm/mach-pxa/pxa95x.c
浏览文件 @ f55be1bf
......@@ -9,7 +9,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
......@@ -21,6 +20,7 @@
#include <linux/syscore_ops.h>
#include <mach/hardware.h>
#include <mach/gpio-pxa.h>
#include <mach/pxa3xx-regs.h>
#include <mach/pxa930.h>
#include <mach/reset.h>
......
arch/arm/mach-pxa/saarb.c
浏览文件 @ f55be1bf
......@@ -15,6 +15,7 @@
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/mfd/88pm860x.h>
#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
......
arch/arm/plat-pxa/include/plat/gpio-pxa.h 0 → 100644
浏览文件 @ f55be1bf
#ifndef __PLAT_PXA_GPIO_H
#define __PLAT_PXA_GPIO_H
struct irq_data;
/*
* We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
* one set of registers. The register offsets are organized below:
*
* GPLR GPDR GPSR GPCR GRER GFER GEDR
* BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048
* BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C
* BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050
*
* BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148
* BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C
* BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150
*
* NOTE:
* BANK 3 is only available on PXA27x and later processors.
* BANK 4 and 5 are only available on PXA935
*/
#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n))
#define GPLR_OFFSET 0x00
#define GPDR_OFFSET 0x0C
#define GPSR_OFFSET 0x18
#define GPCR_OFFSET 0x24
#define GRER_OFFSET 0x30
#define GFER_OFFSET 0x3C
#define GEDR_OFFSET 0x48
/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
* Those cases currently cause holes in the GPIO number space, the
* actual number of the last GPIO is recorded by 'pxa_last_gpio'.
*/
extern int pxa_last_gpio;
typedef int (*set_wake_t)(struct irq_data *d, unsigned int on);
extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn);
#endif /* __PLAT_PXA_GPIO_H */
arch/arm/plat-pxa/include/plat/gpio.h
浏览文件 @ f55be1bf
......@@ -3,35 +3,8 @@
#define __ARM_GPIOLIB_COMPLEX
struct irq_data;
/*
* We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
* one set of registers. The register offsets are organized below:
*
* GPLR GPDR GPSR GPCR GRER GFER GEDR
* BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048
* BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C
* BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050
*
* BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148
* BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C
* BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150
*
* NOTE:
* BANK 3 is only available on PXA27x and later processors.
* BANK 4 and 5 are only available on PXA935
*/
#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n))
#define GPLR_OFFSET 0x00
#define GPDR_OFFSET 0x0C
#define GPSR_OFFSET 0x18
#define GPCR_OFFSET 0x24
#define GRER_OFFSET 0x30
#define GFER_OFFSET 0x3C
#define GEDR_OFFSET 0x48
/* The individual machine provides register offsets and NR_BUILTIN_GPIO */
#include <mach/gpio-pxa.h>
static inline int gpio_get_value(unsigned gpio)
{
......@@ -54,13 +27,4 @@ static inline void gpio_set_value(unsigned gpio, int value)
#define gpio_cansleep __gpio_cansleep
/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
* Those cases currently cause holes in the GPIO number space, the
* actual number of the last GPIO is recorded by 'pxa_last_gpio'.
*/
extern int pxa_last_gpio;
typedef int (*set_wake_t)(struct irq_data *d, unsigned int on);
extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn);
#endif /* __PLAT_GPIO_H */
drivers/gpio/gpio-pxa.c
浏览文件 @ f55be1bf
......@@ -18,6 +18,8 @@
#include <linux/syscore_ops.h>
#include <linux/slab.h>
#include <mach/gpio-pxa.h>
int pxa_last_gpio;
struct pxa_gpio_chip {
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或