提交 f34c5c82 编写于 作者: Y Yi Zou 提交者: David S. Miller

ixgbe: Add support for NETIF_F_FCOE_MTU to 82599 devices

Enable netdev feature flag bit NETIF_F_FCOE_MTU for 82599 devices and enable
jumbo frame correspondingly when NETIF_F_FCOE_MTU is set.
Signed-off-by: NYi Zou <yi.zou@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 bb2af4f5
......@@ -148,8 +148,10 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state)
IXGBE_FCRETA_SIZE;
netdev->features |= NETIF_F_FCOE_CRC;
netdev->features |= NETIF_F_FSO;
netdev->features |= NETIF_F_FCOE_MTU;
netdev->vlan_features |= NETIF_F_FCOE_CRC;
netdev->vlan_features |= NETIF_F_FSO;
netdev->vlan_features |= NETIF_F_FCOE_MTU;
netdev->fcoe_ddp_xid = IXGBE_FCOE_DDP_MAX - 1;
netdev_features_change(netdev);
}
......@@ -180,8 +182,10 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state)
adapter->ring_feature[RING_F_FCOE].indices = 0;
netdev->features &= ~NETIF_F_FCOE_CRC;
netdev->features &= ~NETIF_F_FSO;
netdev->features &= ~NETIF_F_FCOE_MTU;
netdev->vlan_features &= ~NETIF_F_FCOE_CRC;
netdev->vlan_features &= ~NETIF_F_FSO;
netdev->vlan_features &= ~NETIF_F_FCOE_MTU;
netdev->fcoe_ddp_xid = 0;
netdev_features_change(netdev);
}
......
......@@ -2026,7 +2026,7 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
else
hlreg0 |= IXGBE_HLREG0_JUMBOEN;
#ifdef IXGBE_FCOE
if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
if (netdev->features & NETIF_F_FCOE_MTU)
hlreg0 |= IXGBE_HLREG0_JUMBOEN;
#endif
IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
......@@ -2057,7 +2057,7 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
rx_ring->flags |= IXGBE_RING_RX_PS_ENABLED;
#ifdef IXGBE_FCOE
if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
if (netdev->features & NETIF_F_FCOE_MTU) {
struct ixgbe_ring_feature *f;
f = &adapter->ring_feature[RING_F_FCOE];
if ((i >= f->mask) && (i < f->mask + f->indices)) {
......@@ -2609,7 +2609,7 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
#ifdef IXGBE_FCOE
/* adjust max frame to be able to do baby jumbo for FCoE */
if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED) &&
if ((netdev->features & NETIF_F_FCOE_MTU) &&
(max_frame < IXGBE_FCOE_JUMBO_FRAME_SIZE))
max_frame = IXGBE_FCOE_JUMBO_FRAME_SIZE;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册