Merge branch 'for-linville' of git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx

MAINTAINERS

@@ -6669,6 +6669,16 @@ L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Maintained
 F:	sound/soc/codecs/twl4030*
 
+TI WILINK WIRELESS DRIVERS
+M:	Luciano Coelho <coelho@ti.com>
+L:	linux-wireless@vger.kernel.org
+W:	http://wireless.kernel.org/en/users/Drivers/wl12xx
+W:	http://wireless.kernel.org/en/users/Drivers/wl1251
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx.git
+S:	Maintained
+F:	drivers/net/wireless/ti/
+F:	include/linux/wl12xx.h
+
 TIPC NETWORK LAYER
 M:	Jon Maloy <jon.maloy@ericsson.com>
 M:	Allan Stephens <allan.stephens@windriver.com>
@@ -7425,23 +7435,6 @@ M:	Miloslav Trmac <mitr@volny.cz>
 S:	Maintained
 F:	drivers/input/misc/wistron_btns.c
 
-WL1251 WIRELESS DRIVER
-M:	Luciano Coelho <coelho@ti.com>
-L:	linux-wireless@vger.kernel.org
-W:	http://wireless.kernel.org/en/users/Drivers/wl1251
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
-S:	Maintained
-F:	drivers/net/wireless/wl1251/*
-
-WL1271 WIRELESS DRIVER
-M:	Luciano Coelho <coelho@ti.com>
-L:	linux-wireless@vger.kernel.org
-W:	http://wireless.kernel.org/en/users/Drivers/wl12xx
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx.git
-S:	Maintained
-F:	drivers/net/wireless/wl12xx/
-F:	include/linux/wl12xx.h
-
 WL3501 WIRELESS PCMCIA CARD DRIVER
 M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
 L:	linux-wireless@vger.kernel.org

drivers/net/wireless/Kconfig

@@ -282,8 +282,7 @@ source "drivers/net/wireless/orinoco/Kconfig"
 source "drivers/net/wireless/p54/Kconfig"
 source "drivers/net/wireless/rt2x00/Kconfig"
 source "drivers/net/wireless/rtlwifi/Kconfig"
-source "drivers/net/wireless/wl1251/Kconfig"
-source "drivers/net/wireless/wl12xx/Kconfig"
+source "drivers/net/wireless/ti/Kconfig"
 source "drivers/net/wireless/zd1211rw/Kconfig"
 source "drivers/net/wireless/mwifiex/Kconfig"
 

drivers/net/wireless/Makefile

@@ -51,9 +51,7 @@ obj-$(CONFIG_ATH_COMMON)	+= ath/
 
 obj-$(CONFIG_MAC80211_HWSIM)	+= mac80211_hwsim.o
 
-obj-$(CONFIG_WL1251)	+= wl1251/
-obj-$(CONFIG_WL12XX)	+= wl12xx/
-obj-$(CONFIG_WL12XX_PLATFORM_DATA)	+= wl12xx/
+obj-$(CONFIG_WL_TI)	+= ti/
 
 obj-$(CONFIG_IWM)	+= iwmc3200wifi/
 

drivers/net/wireless/ti/Kconfig

+menuconfig WL_TI
+	bool "TI Wireless LAN support"
+	---help---
+	  This section contains support for all the wireless drivers
+	  for Texas Instruments WLAN chips, such as wl1251 and the wl12xx
+	  family.
+
+if WL_TI
+source "drivers/net/wireless/ti/wl1251/Kconfig"
+source "drivers/net/wireless/ti/wl12xx/Kconfig"
+
+# keep last for automatic dependencies
+source "drivers/net/wireless/ti/wlcore/Kconfig"
+endif # WL_TI

drivers/net/wireless/ti/Makefile

+obj-$(CONFIG_WLCORE)			+= wlcore/
+obj-$(CONFIG_WL12XX)			+= wl12xx/
+obj-$(CONFIG_WL12XX_PLATFORM_DATA)	+= wlcore/
+obj-$(CONFIG_WL1251)			+= wl1251/

drivers/net/wireless/ti/wl12xx/Kconfig

+config WL12XX
+       tristate "TI wl12xx support"
+       select WLCORE
+       ---help---
+	  This module adds support for wireless adapters based on TI wl1271,
+	  wl1273, wl1281 and wl1283 chipsets. This module does *not* include
+	  support for wl1251.  For wl1251 support, use the separate homonymous
+	   driver instead.

drivers/net/wireless/ti/wl12xx/Makefile

+wl12xx-objs	= main.o cmd.o acx.o
+
+obj-$(CONFIG_WL12XX)		+= wl12xx.o

drivers/net/wireless/ti/wl12xx/acx.c

+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ * Copyright (C) 2011 Texas Instruments Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "../wlcore/cmd.h"
+#include "../wlcore/debug.h"
+#include "../wlcore/acx.h"
+
+#include "acx.h"
+
+int wl1271_acx_host_if_cfg_bitmap(struct wl1271 *wl, u32 host_cfg_bitmap)
+{
+	struct wl1271_acx_host_config_bitmap *bitmap_conf;
+	int ret;
+
+	bitmap_conf = kzalloc(sizeof(*bitmap_conf), GFP_KERNEL);
+	if (!bitmap_conf) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	bitmap_conf->host_cfg_bitmap = cpu_to_le32(host_cfg_bitmap);
+
+	ret = wl1271_cmd_configure(wl, ACX_HOST_IF_CFG_BITMAP,
+				   bitmap_conf, sizeof(*bitmap_conf));
+	if (ret < 0) {
+		wl1271_warning("wl1271 bitmap config opt failed: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(bitmap_conf);
+
+	return ret;
+}

drivers/net/wireless/ti/wl12xx/acx.h

+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 1998-2009, 2011 Texas Instruments. All rights reserved.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_ACX_H__
+#define __WL12XX_ACX_H__
+
+#include "../wlcore/wlcore.h"
+
+struct wl1271_acx_host_config_bitmap {
+	struct acx_header header;
+
+	__le32 host_cfg_bitmap;
+} __packed;
+
+int wl1271_acx_host_if_cfg_bitmap(struct wl1271 *wl, u32 host_cfg_bitmap);
+
+#endif /* __WL12XX_ACX_H__ */

drivers/net/wireless/ti/wl12xx/cmd.c

+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2009-2010 Nokia Corporation
+ * Copyright (C) 2011 Texas Instruments Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "../wlcore/cmd.h"
+#include "../wlcore/debug.h"
+
+#include "wl12xx.h"
+#include "cmd.h"
+
+int wl1271_cmd_ext_radio_parms(struct wl1271 *wl)
+{
+	struct wl1271_ext_radio_parms_cmd *ext_radio_parms;
+	struct wl12xx_priv *priv = wl->priv;
+	struct wl12xx_conf_rf *rf = &priv->conf.rf;
+	int ret;
+
+	if (!wl->nvs)
+		return -ENODEV;
+
+	ext_radio_parms = kzalloc(sizeof(*ext_radio_parms), GFP_KERNEL);
+	if (!ext_radio_parms)
+		return -ENOMEM;
+
+	ext_radio_parms->test.id = TEST_CMD_INI_FILE_RF_EXTENDED_PARAM;
+
+	memcpy(ext_radio_parms->tx_per_channel_power_compensation_2,
+	       rf->tx_per_channel_power_compensation_2,
+	       CONF_TX_PWR_COMPENSATION_LEN_2);
+	memcpy(ext_radio_parms->tx_per_channel_power_compensation_5,
+	       rf->tx_per_channel_power_compensation_5,
+	       CONF_TX_PWR_COMPENSATION_LEN_5);
+
+	wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_EXT_RADIO_PARAM: ",
+		    ext_radio_parms, sizeof(*ext_radio_parms));
+
+	ret = wl1271_cmd_test(wl, ext_radio_parms, sizeof(*ext_radio_parms), 0);
+	if (ret < 0)
+		wl1271_warning("TEST_CMD_INI_FILE_RF_EXTENDED_PARAM failed");
+
+	kfree(ext_radio_parms);
+	return ret;
+}
+
+int wl1271_cmd_general_parms(struct wl1271 *wl)
+{
+	struct wl1271_general_parms_cmd *gen_parms;
+	struct wl1271_ini_general_params *gp =
+		&((struct wl1271_nvs_file *)wl->nvs)->general_params;
+	bool answer = false;
+	int ret;
+
+	if (!wl->nvs)
+		return -ENODEV;
+
+	if (gp->tx_bip_fem_manufacturer >= WL1271_INI_FEM_MODULE_COUNT) {
+		wl1271_warning("FEM index from INI out of bounds");
+		return -EINVAL;
+	}
+
+	gen_parms = kzalloc(sizeof(*gen_parms), GFP_KERNEL);
+	if (!gen_parms)
+		return -ENOMEM;
+
+	gen_parms->test.id = TEST_CMD_INI_FILE_GENERAL_PARAM;
+
+	memcpy(&gen_parms->general_params, gp, sizeof(*gp));
+
+	if (gp->tx_bip_fem_auto_detect)
+		answer = true;
+
+	/* Override the REF CLK from the NVS with the one from platform data */
+	gen_parms->general_params.ref_clock = wl->ref_clock;
+
+	ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), answer);
+	if (ret < 0) {
+		wl1271_warning("CMD_INI_FILE_GENERAL_PARAM failed");
+		goto out;
+	}
+
+	gp->tx_bip_fem_manufacturer =
+		gen_parms->general_params.tx_bip_fem_manufacturer;
+
+	if (gp->tx_bip_fem_manufacturer >= WL1271_INI_FEM_MODULE_COUNT) {
+		wl1271_warning("FEM index from FW out of bounds");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	wl1271_debug(DEBUG_CMD, "FEM autodetect: %s, manufacturer: %d\n",
+		     answer ? "auto" : "manual", gp->tx_bip_fem_manufacturer);
+
+out:
+	kfree(gen_parms);
+	return ret;
+}
+
+int wl128x_cmd_general_parms(struct wl1271 *wl)
+{
+	struct wl128x_general_parms_cmd *gen_parms;
+	struct wl128x_ini_general_params *gp =
+		&((struct wl128x_nvs_file *)wl->nvs)->general_params;
+	bool answer = false;
+	int ret;
+
+	if (!wl->nvs)
+		return -ENODEV;
+
+	if (gp->tx_bip_fem_manufacturer >= WL1271_INI_FEM_MODULE_COUNT) {
+		wl1271_warning("FEM index from ini out of bounds");
+		return -EINVAL;
+	}
+
+	gen_parms = kzalloc(sizeof(*gen_parms), GFP_KERNEL);
+	if (!gen_parms)
+		return -ENOMEM;
+
+	gen_parms->test.id = TEST_CMD_INI_FILE_GENERAL_PARAM;
+
+	memcpy(&gen_parms->general_params, gp, sizeof(*gp));
+
+	if (gp->tx_bip_fem_auto_detect)
+		answer = true;
+
+	/* Replace REF and TCXO CLKs with the ones from platform data */
+	gen_parms->general_params.ref_clock = wl->ref_clock;
+	gen_parms->general_params.tcxo_ref_clock = wl->tcxo_clock;
+
+	ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), answer);
+	if (ret < 0) {
+		wl1271_warning("CMD_INI_FILE_GENERAL_PARAM failed");
+		goto out;
+	}
+
+	gp->tx_bip_fem_manufacturer =
+		gen_parms->general_params.tx_bip_fem_manufacturer;
+
+	if (gp->tx_bip_fem_manufacturer >= WL1271_INI_FEM_MODULE_COUNT) {
+		wl1271_warning("FEM index from FW out of bounds");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	wl1271_debug(DEBUG_CMD, "FEM autodetect: %s, manufacturer: %d\n",
+		     answer ? "auto" : "manual", gp->tx_bip_fem_manufacturer);
+
+out:
+	kfree(gen_parms);
+	return ret;
+}
+
+int wl1271_cmd_radio_parms(struct wl1271 *wl)
+{
+	struct wl1271_nvs_file *nvs = (struct wl1271_nvs_file *)wl->nvs;
+	struct wl1271_radio_parms_cmd *radio_parms;
+	struct wl1271_ini_general_params *gp = &nvs->general_params;
+	int ret;
+
+	if (!wl->nvs)
+		return -ENODEV;
+
+	radio_parms = kzalloc(sizeof(*radio_parms), GFP_KERNEL);
+	if (!radio_parms)
+		return -ENOMEM;
+
+	radio_parms->test.id = TEST_CMD_INI_FILE_RADIO_PARAM;
+
+	/* 2.4GHz parameters */
+	memcpy(&radio_parms->static_params_2, &nvs->stat_radio_params_2,
+	       sizeof(struct wl1271_ini_band_params_2));
+	memcpy(&radio_parms->dyn_params_2,
+	       &nvs->dyn_radio_params_2[gp->tx_bip_fem_manufacturer].params,
+	       sizeof(struct wl1271_ini_fem_params_2));
+
+	/* 5GHz parameters */
+	memcpy(&radio_parms->static_params_5,
+	       &nvs->stat_radio_params_5,
+	       sizeof(struct wl1271_ini_band_params_5));
+	memcpy(&radio_parms->dyn_params_5,
+	       &nvs->dyn_radio_params_5[gp->tx_bip_fem_manufacturer].params,
+	       sizeof(struct wl1271_ini_fem_params_5));
+
+	wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_RADIO_PARAM: ",
+		    radio_parms, sizeof(*radio_parms));
+
+	ret = wl1271_cmd_test(wl, radio_parms, sizeof(*radio_parms), 0);
+	if (ret < 0)
+		wl1271_warning("CMD_INI_FILE_RADIO_PARAM failed");
+
+	kfree(radio_parms);
+	return ret;
+}
+
+int wl128x_cmd_radio_parms(struct wl1271 *wl)
+{
+	struct wl128x_nvs_file *nvs = (struct wl128x_nvs_file *)wl->nvs;
+	struct wl128x_radio_parms_cmd *radio_parms;
+	struct wl128x_ini_general_params *gp = &nvs->general_params;
+	int ret;
+
+	if (!wl->nvs)
+		return -ENODEV;
+
+	radio_parms = kzalloc(sizeof(*radio_parms), GFP_KERNEL);
+	if (!radio_parms)
+		return -ENOMEM;
+
+	radio_parms->test.id = TEST_CMD_INI_FILE_RADIO_PARAM;
+
+	/* 2.4GHz parameters */
+	memcpy(&radio_parms->static_params_2, &nvs->stat_radio_params_2,
+	       sizeof(struct wl128x_ini_band_params_2));
+	memcpy(&radio_parms->dyn_params_2,
+	       &nvs->dyn_radio_params_2[gp->tx_bip_fem_manufacturer].params,
+	       sizeof(struct wl128x_ini_fem_params_2));
+
+	/* 5GHz parameters */
+	memcpy(&radio_parms->static_params_5,
+	       &nvs->stat_radio_params_5,
+	       sizeof(struct wl128x_ini_band_params_5));
+	memcpy(&radio_parms->dyn_params_5,
+	       &nvs->dyn_radio_params_5[gp->tx_bip_fem_manufacturer].params,
+	       sizeof(struct wl128x_ini_fem_params_5));
+
+	radio_parms->fem_vendor_and_options = nvs->fem_vendor_and_options;
+
+	wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_RADIO_PARAM: ",
+		    radio_parms, sizeof(*radio_parms));
+
+	ret = wl1271_cmd_test(wl, radio_parms, sizeof(*radio_parms), 0);
+	if (ret < 0)
+		wl1271_warning("CMD_INI_FILE_RADIO_PARAM failed");
+
+	kfree(radio_parms);
+	return ret;
+}

drivers/net/wireless/ti/wl12xx/cmd.h

+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 1998-2009, 2011 Texas Instruments. All rights reserved.
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_CMD_H__
+#define __WL12XX_CMD_H__
+
+#include "conf.h"
+
+#define TEST_CMD_INI_FILE_RADIO_PARAM       0x19
+#define TEST_CMD_INI_FILE_GENERAL_PARAM     0x1E
+
+struct wl1271_general_parms_cmd {
+	struct wl1271_cmd_header header;
+
+	struct wl1271_cmd_test_header test;
+
+	struct wl1271_ini_general_params general_params;
+
+	u8 sr_debug_table[WL1271_INI_MAX_SMART_REFLEX_PARAM];
+	u8 sr_sen_n_p;
+	u8 sr_sen_n_p_gain;
+	u8 sr_sen_nrn;
+	u8 sr_sen_prn;
+	u8 padding[3];
+} __packed;
+
+struct wl128x_general_parms_cmd {
+	struct wl1271_cmd_header header;
+
+	struct wl1271_cmd_test_header test;
+
+	struct wl128x_ini_general_params general_params;
+
+	u8 sr_debug_table[WL1271_INI_MAX_SMART_REFLEX_PARAM];
+	u8 sr_sen_n_p;
+	u8 sr_sen_n_p_gain;
+	u8 sr_sen_nrn;
+	u8 sr_sen_prn;
+	u8 padding[3];
+} __packed;
+
+struct wl1271_radio_parms_cmd {
+	struct wl1271_cmd_header header;
+
+	struct wl1271_cmd_test_header test;
+
+	/* Static radio parameters */
+	struct wl1271_ini_band_params_2 static_params_2;
+	struct wl1271_ini_band_params_5 static_params_5;
+
+	/* Dynamic radio parameters */
+	struct wl1271_ini_fem_params_2 dyn_params_2;
+	u8 padding2;
+	struct wl1271_ini_fem_params_5 dyn_params_5;
+	u8 padding3[2];
+} __packed;
+
+struct wl128x_radio_parms_cmd {
+	struct wl1271_cmd_header header;
+
+	struct wl1271_cmd_test_header test;
+
+	/* Static radio parameters */
+	struct wl128x_ini_band_params_2 static_params_2;
+	struct wl128x_ini_band_params_5 static_params_5;
+
+	u8 fem_vendor_and_options;
+
+	/* Dynamic radio parameters */
+	struct wl128x_ini_fem_params_2 dyn_params_2;
+	u8 padding2;
+	struct wl128x_ini_fem_params_5 dyn_params_5;
+} __packed;
+
+#define TEST_CMD_INI_FILE_RF_EXTENDED_PARAM 0x26
+
+struct wl1271_ext_radio_parms_cmd {
+	struct wl1271_cmd_header header;
+
+	struct wl1271_cmd_test_header test;
+
+	u8 tx_per_channel_power_compensation_2[CONF_TX_PWR_COMPENSATION_LEN_2];
+	u8 tx_per_channel_power_compensation_5[CONF_TX_PWR_COMPENSATION_LEN_5];
+	u8 padding[3];
+} __packed;
+
+int wl1271_cmd_general_parms(struct wl1271 *wl);
+int wl128x_cmd_general_parms(struct wl1271 *wl);
+int wl1271_cmd_radio_parms(struct wl1271 *wl);
+int wl128x_cmd_radio_parms(struct wl1271 *wl);
+int wl1271_cmd_ext_radio_parms(struct wl1271 *wl);
+
+#endif /* __WL12XX_CMD_H__ */

drivers/net/wireless/ti/wl12xx/conf.h

+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2011 Texas Instruments Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_CONF_H__
+#define __WL12XX_CONF_H__
+
+/* these are number of channels on the band divided by two, rounded up */
+#define CONF_TX_PWR_COMPENSATION_LEN_2 7
+#define CONF_TX_PWR_COMPENSATION_LEN_5 18
+
+struct wl12xx_conf_rf {
+	/*
+	 * Per channel power compensation for 2.4GHz
+	 *
+	 * Range: s8
+	 */
+	u8 tx_per_channel_power_compensation_2[CONF_TX_PWR_COMPENSATION_LEN_2];
+
+	/*
+	 * Per channel power compensation for 5GHz
+	 *
+	 * Range: s8
+	 */
+	u8 tx_per_channel_power_compensation_5[CONF_TX_PWR_COMPENSATION_LEN_5];
+};
+
+struct wl12xx_priv_conf {
+	struct wl12xx_conf_rf rf;
+	struct conf_memory_settings mem_wl127x;
+};
+
+#endif /* __WL12XX_CONF_H__ */

drivers/net/wireless/wl12xx/reg.h → drivers/net/wireless/ti/wl12xx/reg.h

@@ -33,16 +33,8 @@
 #define REGISTERS_DOWN_SIZE 0x00008800
 #define REGISTERS_WORK_SIZE 0x0000b000
 
-#define HW_ACCESS_ELP_CTRL_REG_ADDR         0x1FFFC
 #define FW_STATUS_ADDR                      (0x14FC0 + 0xA000)
 
-/* ELP register commands */
-#define ELPCTRL_WAKE_UP             0x1
-#define ELPCTRL_WAKE_UP_WLAN_READY  0x5
-#define ELPCTRL_SLEEP               0x0
-/* ELP WLAN_READY bit */
-#define ELPCTRL_WLAN_READY          0x2
-
 /*===============================================
    Host Software Reset - 32bit RW
  ------------------------------------------
@@ -57,14 +49,14 @@
     (not self-clearing), the Wlan hardware
     exits the software reset state.
 ===============================================*/
-#define ACX_REG_SLV_SOFT_RESET         (REGISTERS_BASE + 0x0000)
+#define WL12XX_SLV_SOFT_RESET		(REGISTERS_BASE + 0x0000)
 
 #define WL1271_SLV_REG_DATA            (REGISTERS_BASE + 0x0008)
 #define WL1271_SLV_REG_ADATA           (REGISTERS_BASE + 0x000c)
 #define WL1271_SLV_MEM_DATA            (REGISTERS_BASE + 0x0018)
 
-#define ACX_REG_INTERRUPT_TRIG         (REGISTERS_BASE + 0x0474)
-#define ACX_REG_INTERRUPT_TRIG_H       (REGISTERS_BASE + 0x0478)
+#define WL12XX_REG_INTERRUPT_TRIG         (REGISTERS_BASE + 0x0474)
+#define WL12XX_REG_INTERRUPT_TRIG_H       (REGISTERS_BASE + 0x0478)
 
 /*=============================================
   Host Interrupt Mask Register - 32bit (RW)
@@ -94,7 +86,7 @@
  21-			-
  Default: 0x0001
 *==============================================*/
-#define ACX_REG_INTERRUPT_MASK         (REGISTERS_BASE + 0x04DC)
+#define WL12XX_REG_INTERRUPT_MASK         (REGISTERS_BASE + 0x04DC)
 
 /*=============================================
   Host Interrupt Mask Set 16bit, (Write only)
@@ -125,7 +117,7 @@
  Reading this register doesn't
  effect its content.
 =============================================*/
-#define ACX_REG_INTERRUPT_NO_CLEAR     (REGISTERS_BASE + 0x04E8)
+#define WL12XX_REG_INTERRUPT_NO_CLEAR     (REGISTERS_BASE + 0x04E8)
 
 /*=============================================
   Host Interrupt Status Clear on Read  Register
@@ -148,9 +140,9 @@
  HINT_STS_ND registers, thus making the
  assotiated interrupt inactive. (0-no effect)
 ==============================================*/
-#define ACX_REG_INTERRUPT_ACK          (REGISTERS_BASE + 0x04F0)
+#define WL12XX_REG_INTERRUPT_ACK          (REGISTERS_BASE + 0x04F0)
 
-#define RX_DRIVER_COUNTER_ADDRESS      (REGISTERS_BASE + 0x0538)
+#define WL12XX_REG_RX_DRIVER_COUNTER	(REGISTERS_BASE + 0x0538)
 
 /* Device Configuration registers*/
 #define SOR_CFG                        (REGISTERS_BASE + 0x0800)
@@ -175,9 +167,9 @@
  1 halt eCPU
  0 enable eCPU
  ===============================================*/
-#define ACX_REG_ECPU_CONTROL           (REGISTERS_BASE + 0x0804)
+#define WL12XX_REG_ECPU_CONTROL           (REGISTERS_BASE + 0x0804)
 
-#define HI_CFG                         (REGISTERS_BASE + 0x0808)
+#define WL12XX_HI_CFG			(REGISTERS_BASE + 0x0808)
 
 /*===============================================
  EEPROM Burst Read Start  - 32bit RW
@@ -196,72 +188,67 @@
 *================================================*/
 #define ACX_REG_EE_START               (REGISTERS_BASE + 0x080C)
 
-#define OCP_POR_CTR                    (REGISTERS_BASE + 0x09B4)
-#define OCP_DATA_WRITE                 (REGISTERS_BASE + 0x09B8)
-#define OCP_DATA_READ                  (REGISTERS_BASE + 0x09BC)
-#define OCP_CMD                        (REGISTERS_BASE + 0x09C0)
-
-#define WL1271_HOST_WR_ACCESS          (REGISTERS_BASE + 0x09F8)
+#define WL12XX_OCP_POR_CTR		(REGISTERS_BASE + 0x09B4)
+#define WL12XX_OCP_DATA_WRITE		(REGISTERS_BASE + 0x09B8)
+#define WL12XX_OCP_DATA_READ		(REGISTERS_BASE + 0x09BC)
+#define WL12XX_OCP_CMD			(REGISTERS_BASE + 0x09C0)
 
-#define CHIP_ID_B                      (REGISTERS_BASE + 0x5674)
+#define WL12XX_HOST_WR_ACCESS		(REGISTERS_BASE + 0x09F8)
 
-#define CHIP_ID_1271_PG10              (0x4030101)
-#define CHIP_ID_1271_PG20              (0x4030111)
-#define CHIP_ID_1283_PG10              (0x05030101)
-#define CHIP_ID_1283_PG20              (0x05030111)
+#define WL12XX_CHIP_ID_B		(REGISTERS_BASE + 0x5674)
 
-#define ENABLE                         (REGISTERS_BASE + 0x5450)
+#define WL12XX_ENABLE			(REGISTERS_BASE + 0x5450)
 
 /* Power Management registers */
-#define ELP_CFG_MODE                   (REGISTERS_BASE + 0x5804)
-#define ELP_CMD                        (REGISTERS_BASE + 0x5808)
-#define PLL_CAL_TIME                   (REGISTERS_BASE + 0x5810)
-#define CLK_REQ_TIME                   (REGISTERS_BASE + 0x5814)
-#define CLK_BUF_TIME                   (REGISTERS_BASE + 0x5818)
+#define WL12XX_ELP_CFG_MODE		(REGISTERS_BASE + 0x5804)
+#define WL12XX_ELP_CMD			(REGISTERS_BASE + 0x5808)
+#define WL12XX_PLL_CAL_TIME		(REGISTERS_BASE + 0x5810)
+#define WL12XX_CLK_REQ_TIME		(REGISTERS_BASE + 0x5814)
+#define WL12XX_CLK_BUF_TIME		(REGISTERS_BASE + 0x5818)
 
-#define CFG_PLL_SYNC_CNT               (REGISTERS_BASE + 0x5820)
+#define WL12XX_CFG_PLL_SYNC_CNT		(REGISTERS_BASE + 0x5820)
 
 /* Scratch Pad registers*/
-#define SCR_PAD0                       (REGISTERS_BASE + 0x5608)
-#define SCR_PAD1                       (REGISTERS_BASE + 0x560C)
-#define SCR_PAD2                       (REGISTERS_BASE + 0x5610)
-#define SCR_PAD3                       (REGISTERS_BASE + 0x5614)
-#define SCR_PAD4                       (REGISTERS_BASE + 0x5618)
-#define SCR_PAD4_SET                   (REGISTERS_BASE + 0x561C)
-#define SCR_PAD4_CLR                   (REGISTERS_BASE + 0x5620)
-#define SCR_PAD5                       (REGISTERS_BASE + 0x5624)
-#define SCR_PAD5_SET                   (REGISTERS_BASE + 0x5628)
-#define SCR_PAD5_CLR                   (REGISTERS_BASE + 0x562C)
-#define SCR_PAD6                       (REGISTERS_BASE + 0x5630)
-#define SCR_PAD7                       (REGISTERS_BASE + 0x5634)
-#define SCR_PAD8                       (REGISTERS_BASE + 0x5638)
-#define SCR_PAD9                       (REGISTERS_BASE + 0x563C)
+#define WL12XX_SCR_PAD0			(REGISTERS_BASE + 0x5608)
+#define WL12XX_SCR_PAD1			(REGISTERS_BASE + 0x560C)
+#define WL12XX_SCR_PAD2			(REGISTERS_BASE + 0x5610)
+#define WL12XX_SCR_PAD3			(REGISTERS_BASE + 0x5614)
+#define WL12XX_SCR_PAD4			(REGISTERS_BASE + 0x5618)
+#define WL12XX_SCR_PAD4_SET		(REGISTERS_BASE + 0x561C)
+#define WL12XX_SCR_PAD4_CLR		(REGISTERS_BASE + 0x5620)
+#define WL12XX_SCR_PAD5			(REGISTERS_BASE + 0x5624)
+#define WL12XX_SCR_PAD5_SET		(REGISTERS_BASE + 0x5628)
+#define WL12XX_SCR_PAD5_CLR		(REGISTERS_BASE + 0x562C)
+#define WL12XX_SCR_PAD6			(REGISTERS_BASE + 0x5630)
+#define WL12XX_SCR_PAD7			(REGISTERS_BASE + 0x5634)
+#define WL12XX_SCR_PAD8			(REGISTERS_BASE + 0x5638)
+#define WL12XX_SCR_PAD9			(REGISTERS_BASE + 0x563C)
 
 /* Spare registers*/
-#define SPARE_A1                       (REGISTERS_BASE + 0x0994)
-#define SPARE_A2                       (REGISTERS_BASE + 0x0998)
-#define SPARE_A3                       (REGISTERS_BASE + 0x099C)
-#define SPARE_A4                       (REGISTERS_BASE + 0x09A0)
-#define SPARE_A5                       (REGISTERS_BASE + 0x09A4)
-#define SPARE_A6                       (REGISTERS_BASE + 0x09A8)
-#define SPARE_A7                       (REGISTERS_BASE + 0x09AC)
-#define SPARE_A8                       (REGISTERS_BASE + 0x09B0)
-#define SPARE_B1                       (REGISTERS_BASE + 0x5420)
-#define SPARE_B2                       (REGISTERS_BASE + 0x5424)
-#define SPARE_B3                       (REGISTERS_BASE + 0x5428)
-#define SPARE_B4                       (REGISTERS_BASE + 0x542C)
-#define SPARE_B5                       (REGISTERS_BASE + 0x5430)
-#define SPARE_B6                       (REGISTERS_BASE + 0x5434)
-#define SPARE_B7                       (REGISTERS_BASE + 0x5438)
-#define SPARE_B8                       (REGISTERS_BASE + 0x543C)
-
-#define PLL_PARAMETERS                 (REGISTERS_BASE + 0x6040)
-#define WU_COUNTER_PAUSE               (REGISTERS_BASE + 0x6008)
-#define WELP_ARM_COMMAND               (REGISTERS_BASE + 0x6100)
-#define DRPW_SCRATCH_START             (DRPW_BASE + 0x002C)
-
-
-#define ACX_SLV_SOFT_RESET_BIT   BIT(1)
+#define WL12XX_SPARE_A1			(REGISTERS_BASE + 0x0994)
+#define WL12XX_SPARE_A2			(REGISTERS_BASE + 0x0998)
+#define WL12XX_SPARE_A3			(REGISTERS_BASE + 0x099C)
+#define WL12XX_SPARE_A4			(REGISTERS_BASE + 0x09A0)
+#define WL12XX_SPARE_A5			(REGISTERS_BASE + 0x09A4)
+#define WL12XX_SPARE_A6			(REGISTERS_BASE + 0x09A8)
+#define WL12XX_SPARE_A7			(REGISTERS_BASE + 0x09AC)
+#define WL12XX_SPARE_A8			(REGISTERS_BASE + 0x09B0)
+#define WL12XX_SPARE_B1			(REGISTERS_BASE + 0x5420)
+#define WL12XX_SPARE_B2			(REGISTERS_BASE + 0x5424)
+#define WL12XX_SPARE_B3			(REGISTERS_BASE + 0x5428)
+#define WL12XX_SPARE_B4			(REGISTERS_BASE + 0x542C)
+#define WL12XX_SPARE_B5			(REGISTERS_BASE + 0x5430)
+#define WL12XX_SPARE_B6			(REGISTERS_BASE + 0x5434)
+#define WL12XX_SPARE_B7			(REGISTERS_BASE + 0x5438)
+#define WL12XX_SPARE_B8			(REGISTERS_BASE + 0x543C)
+
+#define WL12XX_PLL_PARAMETERS		(REGISTERS_BASE + 0x6040)
+#define WL12XX_WU_COUNTER_PAUSE		(REGISTERS_BASE + 0x6008)
+#define WL12XX_WELP_ARM_COMMAND		(REGISTERS_BASE + 0x6100)
+#define WL12XX_DRPW_SCRATCH_START	(DRPW_BASE + 0x002C)
+
+#define WL12XX_CMD_MBOX_ADDRESS		0x407B4
+
 #define ACX_REG_EEPROM_START_BIT BIT(1)
 
 /* Command/Information Mailbox Pointers */
@@ -279,7 +266,7 @@
  the host receives the Init Complete interrupt from
  the Wlan hardware.
  ===============================================*/
-#define REG_COMMAND_MAILBOX_PTR				(SCR_PAD0)
+#define WL12XX_REG_COMMAND_MAILBOX_PTR		(WL12XX_SCR_PAD0)
 
 /*===============================================
   Information Mailbox Pointer - 32bit RW
@@ -294,7 +281,7 @@
  until after the host receives the Init Complete interrupt from
  the Wlan hardware.
  ===============================================*/
-#define REG_EVENT_MAILBOX_PTR				(SCR_PAD1)
+#define WL12XX_REG_EVENT_MAILBOX_PTR		(WL12XX_SCR_PAD1)
 
 /*===============================================
  EEPROM Read/Write Request 32bit RW
@@ -365,26 +352,6 @@
 #define ACX_CONT_WIND_MIN_MASK   0x0000007f
 #define ACX_CONT_WIND_MAX        0x03ff0000
 
-/*===============================================
-  HI_CFG Interface Configuration Register Values
-  ------------------------------------------
-  ===============================================*/
-#define HI_CFG_UART_ENABLE          0x00000004
-#define HI_CFG_RST232_ENABLE        0x00000008
-#define HI_CFG_CLOCK_REQ_SELECT     0x00000010
-#define HI_CFG_HOST_INT_ENABLE      0x00000020
-#define HI_CFG_VLYNQ_OUTPUT_ENABLE  0x00000040
-#define HI_CFG_HOST_INT_ACTIVE_LOW  0x00000080
-#define HI_CFG_UART_TX_OUT_GPIO_15  0x00000100
-#define HI_CFG_UART_TX_OUT_GPIO_14  0x00000200
-#define HI_CFG_UART_TX_OUT_GPIO_7   0x00000400
-
-#define HI_CFG_DEF_VAL              \
-	(HI_CFG_UART_ENABLE |        \
-	HI_CFG_RST232_ENABLE |      \
-	HI_CFG_CLOCK_REQ_SELECT |   \
-	HI_CFG_HOST_INT_ENABLE)
-
 #define REF_FREQ_19_2                       0
 #define REF_FREQ_26_0                       1
 #define REF_FREQ_38_4                       2
@@ -400,38 +367,19 @@
 #define LUT_PARAM_BB_PLL_LOOP_FILTER        5
 #define LUT_PARAM_NUM                       6
 
-#define ACX_EEPROMLESS_IND_REG              (SCR_PAD4)
+#define WL12XX_EEPROMLESS_IND		(WL12XX_SCR_PAD4)
 #define USE_EEPROM                          0
-#define SOFT_RESET_MAX_TIME                 1000000
-#define SOFT_RESET_STALL_TIME               1000
 #define NVS_DATA_BUNDARY_ALIGNMENT          4
 
-
-/* Firmware image load chunk size */
-#define CHUNK_SIZE	16384
-
 /* Firmware image header size */
 #define FW_HDR_SIZE 8
 
-#define ECPU_CONTROL_HALT					0x00000101
-
-
 /******************************************************************************
 
     CHANNELS, BAND & REG DOMAINS definitions
 
 ******************************************************************************/
 
-
-enum {
-	RADIO_BAND_2_4GHZ = 0,  /* 2.4 Ghz band */
-	RADIO_BAND_5GHZ = 1,    /* 5 Ghz band */
-	RADIO_BAND_JAPAN_4_9_GHZ = 2,
-	DEFAULT_BAND = RADIO_BAND_2_4GHZ,
-	INVALID_BAND = 0xFE,
-	MAX_RADIO_BANDS = 0xFF
-};
-
 #define SHORT_PREAMBLE_BIT   BIT(0) /* CCK or Barker depending on the rate */
 #define OFDM_RATE_BIT        BIT(6)
 #define PBCC_RATE_BIT        BIT(7)
@@ -465,14 +413,82 @@ b12-b0 - Supported Rate indicator bits as defined below.
 
 ******************************************************************************/
 
+#define OCP_CMD_LOOP		32
+#define OCP_CMD_WRITE		0x1
+#define OCP_CMD_READ		0x2
+#define OCP_READY_MASK		BIT(18)
+#define OCP_STATUS_MASK		(BIT(16) | BIT(17))
+#define OCP_STATUS_NO_RESP	0x00000
+#define OCP_STATUS_OK		0x10000
+#define OCP_STATUS_REQ_FAILED	0x20000
+#define OCP_STATUS_RESP_ERROR	0x30000
+
+#define OCP_REG_POLARITY     0x0064
+#define OCP_REG_CLK_TYPE     0x0448
+#define OCP_REG_CLK_POLARITY 0x0cb2
+#define OCP_REG_CLK_PULL     0x0cb4
+
+#define POLARITY_LOW         BIT(1)
+#define NO_PULL              (BIT(14) | BIT(15))
+
+#define FREF_CLK_TYPE_BITS     0xfffffe7f
+#define CLK_REQ_PRCM           0x100
+#define FREF_CLK_POLARITY_BITS 0xfffff8ff
+#define CLK_REQ_OUTN_SEL       0x700
+
+#define WU_COUNTER_PAUSE_VAL 0x3FF
+
+/* PLL configuration algorithm for wl128x */
+#define SYS_CLK_CFG_REG              0x2200
+/* Bit[0]   -  0-TCXO,  1-FREF */
+#define MCS_PLL_CLK_SEL_FREF         BIT(0)
+/* Bit[3:2] - 01-TCXO, 10-FREF */
+#define WL_CLK_REQ_TYPE_FREF         BIT(3)
+#define WL_CLK_REQ_TYPE_PG2          (BIT(3) | BIT(2))
+/* Bit[4]   -  0-TCXO,  1-FREF */
+#define PRCM_CM_EN_MUX_WLAN_FREF     BIT(4)
+
+#define TCXO_ILOAD_INT_REG           0x2264
+#define TCXO_CLK_DETECT_REG          0x2266
+
+#define TCXO_DET_FAILED              BIT(4)
+
+#define FREF_ILOAD_INT_REG           0x2084
+#define FREF_CLK_DETECT_REG          0x2086
+#define FREF_CLK_DETECT_FAIL         BIT(4)
+
+/* Use this reg for masking during driver access */
+#define WL_SPARE_REG                 0x2320
+#define WL_SPARE_VAL                 BIT(2)
+/* Bit[6:5:3] -  mask wl write SYS_CLK_CFG[8:5:2:4] */
+#define WL_SPARE_MASK_8526           (BIT(6) | BIT(5) | BIT(3))
+
+#define PLL_LOCK_COUNTERS_REG        0xD8C
+#define PLL_LOCK_COUNTERS_COEX       0x0F
+#define PLL_LOCK_COUNTERS_MCS        0xF0
+#define MCS_PLL_OVERRIDE_REG         0xD90
+#define MCS_PLL_CONFIG_REG           0xD92
+#define MCS_SEL_IN_FREQ_MASK         0x0070
+#define MCS_SEL_IN_FREQ_SHIFT        4
+#define MCS_PLL_CONFIG_REG_VAL       0x73
+#define MCS_PLL_ENABLE_HP            (BIT(0) | BIT(1))
+
+#define MCS_PLL_M_REG                0xD94
+#define MCS_PLL_N_REG                0xD96
+#define MCS_PLL_M_REG_VAL            0xC8
+#define MCS_PLL_N_REG_VAL            0x07
+
+#define SDIO_IO_DS                   0xd14
+
+/* SDIO/wSPI DS configuration values */
+enum {
+	HCI_IO_DS_8MA = 0,
+	HCI_IO_DS_4MA = 1, /* default */
+	HCI_IO_DS_6MA = 2,
+	HCI_IO_DS_2MA = 3,
+};
 
-/*************************************************************************
-
-    Interrupt Trigger Register (Host -> WiLink)
-
-**************************************************************************/
-
-/* Hardware to Embedded CPU Interrupts - first 32-bit register set */
+/* end PLL configuration algorithm for wl128x */
 
 /*
  * Host Command Interrupt. Setting this bit masks
@@ -480,7 +496,7 @@ b12-b0 - Supported Rate indicator bits as defined below.
  * the FW that it has sent a command
  * to the Wlan hardware Command Mailbox.
  */
-#define INTR_TRIG_CMD       BIT(0)
+#define WL12XX_INTR_TRIG_CMD		BIT(0)
 
 /*
  * Host Event Acknowlegde Interrupt. The host
@@ -488,42 +504,27 @@ b12-b0 - Supported Rate indicator bits as defined below.
  * the unsolicited information from the event
  * mailbox.
  */
-#define INTR_TRIG_EVENT_ACK BIT(1)
-
-/*
- * The host sets this bit to inform the Wlan
- * FW that a TX packet is in the XFER
- * Buffer #0.
- */
-#define INTR_TRIG_TX_PROC0 BIT(2)
-
-/*
- * The host sets this bit to inform the FW
- * that it read a packet from RX XFER
- * Buffer #0.
- */
-#define INTR_TRIG_RX_PROC0 BIT(3)
-
-#define INTR_TRIG_DEBUG_ACK BIT(4)
+#define WL12XX_INTR_TRIG_EVENT_ACK	BIT(1)
 
-#define INTR_TRIG_STATE_CHANGED BIT(5)
-
-
-/* Hardware to Embedded CPU Interrupts - second 32-bit register set */
-
-/*
- * The host sets this bit to inform the FW
- * that it read a packet from RX XFER
- * Buffer #1.
- */
-#define INTR_TRIG_RX_PROC1 BIT(17)
+/*===============================================
+  HI_CFG Interface Configuration Register Values
+  ------------------------------------------
+  ===============================================*/
+#define HI_CFG_UART_ENABLE          0x00000004
+#define HI_CFG_RST232_ENABLE        0x00000008
+#define HI_CFG_CLOCK_REQ_SELECT     0x00000010
+#define HI_CFG_HOST_INT_ENABLE      0x00000020
+#define HI_CFG_VLYNQ_OUTPUT_ENABLE  0x00000040
+#define HI_CFG_HOST_INT_ACTIVE_LOW  0x00000080
+#define HI_CFG_UART_TX_OUT_GPIO_15  0x00000100
+#define HI_CFG_UART_TX_OUT_GPIO_14  0x00000200
+#define HI_CFG_UART_TX_OUT_GPIO_7   0x00000400
 
-/*
- * The host sets this bit to inform the Wlan
- * hardware that a TX packet is in the XFER
- * Buffer #1.
- */
-#define INTR_TRIG_TX_PROC1 BIT(18)
+#define HI_CFG_DEF_VAL              \
+	(HI_CFG_UART_ENABLE |        \
+	HI_CFG_RST232_ENABLE |      \
+	HI_CFG_CLOCK_REQ_SELECT |   \
+	HI_CFG_HOST_INT_ENABLE)
 
 #define WL127X_REG_FUSE_DATA_2_1	0x050a
 #define WL128X_REG_FUSE_DATA_2_1	0x2152

drivers/net/wireless/ti/wl12xx/wl12xx.h

+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2011 Texas Instruments Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_PRIV_H__
+#define __WL12XX_PRIV_H__
+
+#include "conf.h"
+
+struct wl12xx_priv {
+	struct wl12xx_priv_conf conf;
+};
+
+#endif /* __WL12XX_PRIV_H__ */

drivers/net/wireless/ti/wlcore/Kconfig

+config WLCORE
+	tristate "TI wlcore support"
+	depends on WL_TI && GENERIC_HARDIRQS
+	depends on INET
+	select FW_LOADER
+	---help---
+	  This module contains the main code for TI WLAN chips.  It abstracts
+	  hardware-specific differences among different chipset families.
+	  Each chipset family needs to implement its own lower-level module
+	  that will depend on this module for the common code.
+
+	  If you choose to build a module, it will be called wlcore. Say N if
+	  unsure.
+
+config WLCORE_SPI
+	tristate "TI wlcore SPI support"
+	depends on WLCORE && SPI_MASTER
+	select CRC7
+	---help---
+	  This module adds support for the SPI interface of adapters using
+	  TI WLAN chipsets.  Select this if your platform is using
+	  the SPI bus.
+
+	  If you choose to build a module, it'll be called wlcore_spi.
+	  Say N if unsure.
+
+config WLCORE_SDIO
+	tristate "TI wlcore SDIO support"
+	depends on WLCORE && MMC
+	---help---
+	  This module adds support for the SDIO interface of adapters using
+	  TI WLAN chipsets.  Select this if your platform is using
+	  the SDIO bus.
+
+	  If you choose to build a module, it'll be called wlcore_sdio.
+	  Say N if unsure.
+
+config WL12XX_PLATFORM_DATA
+	bool
+	depends on WLCORE_SDIO != n || WL1251_SDIO != n
+	default y

drivers/net/wireless/wl12xx/Makefile → drivers/net/wireless/ti/wlcore/Makefile

-wl12xx-objs		= main.o cmd.o io.o event.o tx.o rx.o ps.o acx.o \
+wlcore-objs		= main.o cmd.o io.o event.o tx.o rx.o ps.o acx.o \
 			  boot.o init.o debugfs.o scan.o
 
-wl12xx_spi-objs 	= spi.o
-wl12xx_sdio-objs	= sdio.o
+wlcore_spi-objs 	= spi.o
+wlcore_sdio-objs	= sdio.o
 
-wl12xx-$(CONFIG_NL80211_TESTMODE)	+= testmode.o
-obj-$(CONFIG_WL12XX)			+= wl12xx.o
-obj-$(CONFIG_WL12XX_SPI)		+= wl12xx_spi.o
-obj-$(CONFIG_WL12XX_SDIO)		+= wl12xx_sdio.o
+wlcore-$(CONFIG_NL80211_TESTMODE)	+= testmode.o
+obj-$(CONFIG_WLCORE)			+= wlcore.o
+obj-$(CONFIG_WLCORE_SPI)		+= wlcore_spi.o
+obj-$(CONFIG_WLCORE_SDIO)		+= wlcore_sdio.o
 
 # small builtin driver bit
 obj-$(CONFIG_WL12XX_PLATFORM_DATA)	+= wl12xx_platform_data.o

drivers/net/wireless/wl12xx/acx.c → drivers/net/wireless/ti/wlcore/acx.c

@@ -28,11 +28,11 @@
 #include <linux/spi/spi.h>
 #include <linux/slab.h>
 
-#include "wl12xx.h"
+#include "wlcore.h"
 #include "debug.h"
 #include "wl12xx_80211.h"
-#include "reg.h"
 #include "ps.h"
+#include "hw_ops.h"
 
 int wl1271_acx_wake_up_conditions(struct wl1271 *wl, struct wl12xx_vif *wlvif,
 				  u8 wake_up_event, u8 listen_interval)
@@ -757,7 +757,10 @@ int wl1271_acx_sta_rate_policies(struct wl1271 *wl, struct wl12xx_vif *wlvif)
 
 	/* configure one AP supported rate class */
 	acx->rate_policy_idx = cpu_to_le32(wlvif->sta.ap_rate_idx);
-	acx->rate_policy.enabled_rates = cpu_to_le32(wlvif->rate_set);
+
+	/* the AP policy is HW specific */
+	acx->rate_policy.enabled_rates =
+		cpu_to_le32(wlcore_hw_sta_get_ap_rate_mask(wl, wlvif));
 	acx->rate_policy.short_retry_limit = c->short_retry_limit;
 	acx->rate_policy.long_retry_limit = c->long_retry_limit;
 	acx->rate_policy.aflags = c->aflags;
@@ -969,17 +972,14 @@ int wl12xx_acx_mem_cfg(struct wl1271 *wl)
 		goto out;
 	}
 
-	if (wl->chip.id == CHIP_ID_1283_PG20)
-		mem = &wl->conf.mem_wl128x;
-	else
-		mem = &wl->conf.mem_wl127x;
+	mem = &wl->conf.mem;
 
 	/* memory config */
 	mem_conf->num_stations = mem->num_stations;
 	mem_conf->rx_mem_block_num = mem->rx_block_num;
 	mem_conf->tx_min_mem_block_num = mem->tx_min_block_num;
 	mem_conf->num_ssid_profiles = mem->ssid_profiles;
-	mem_conf->total_tx_descriptors = cpu_to_le32(ACX_TX_DESCRIPTORS);
+	mem_conf->total_tx_descriptors = cpu_to_le32(wl->num_tx_desc);
 	mem_conf->dyn_mem_enable = mem->dynamic_memory;
 	mem_conf->tx_free_req = mem->min_req_tx_blocks;
 	mem_conf->rx_free_req = mem->min_req_rx_blocks;
@@ -998,32 +998,6 @@ int wl12xx_acx_mem_cfg(struct wl1271 *wl)
 	return ret;
 }
 
-int wl1271_acx_host_if_cfg_bitmap(struct wl1271 *wl, u32 host_cfg_bitmap)
-{
-	struct wl1271_acx_host_config_bitmap *bitmap_conf;
-	int ret;
-
-	bitmap_conf = kzalloc(sizeof(*bitmap_conf), GFP_KERNEL);
-	if (!bitmap_conf) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	bitmap_conf->host_cfg_bitmap = cpu_to_le32(host_cfg_bitmap);
-
-	ret = wl1271_cmd_configure(wl, ACX_HOST_IF_CFG_BITMAP,
-				   bitmap_conf, sizeof(*bitmap_conf));
-	if (ret < 0) {
-		wl1271_warning("wl1271 bitmap config opt failed: %d", ret);
-		goto out;
-	}
-
-out:
-	kfree(bitmap_conf);
-
-	return ret;
-}
-
 int wl1271_acx_init_mem_config(struct wl1271 *wl)
 {
 	int ret;

drivers/net/wireless/wl12xx/acx.h → drivers/net/wireless/ti/wlcore/acx.h

@@ -25,7 +25,7 @@
 #ifndef __ACX_H__
 #define __ACX_H__
 
-#include "wl12xx.h"
+#include "wlcore.h"
 #include "cmd.h"
 
 /*************************************************************************
@@ -824,16 +824,11 @@ struct wl1271_acx_keep_alive_config {
 	__le32 period;
 } __packed;
 
+/* TODO: maybe this needs to be moved somewhere else? */
 #define HOST_IF_CFG_RX_FIFO_ENABLE     BIT(0)
 #define HOST_IF_CFG_TX_EXTRA_BLKS_SWAP BIT(1)
 #define HOST_IF_CFG_TX_PAD_TO_SDIO_BLK BIT(3)
 
-struct wl1271_acx_host_config_bitmap {
-	struct acx_header header;
-
-	__le32 host_cfg_bitmap;
-} __packed;
-
 enum {
 	WL1271_ACX_TRIG_TYPE_LEVEL = 0,
 	WL1271_ACX_TRIG_TYPE_EDGE,
@@ -1274,7 +1269,6 @@ int wl1271_acx_frag_threshold(struct wl1271 *wl, u32 frag_threshold);
 int wl1271_acx_tx_config_options(struct wl1271 *wl);
 int wl12xx_acx_mem_cfg(struct wl1271 *wl);
 int wl1271_acx_init_mem_config(struct wl1271 *wl);
-int wl1271_acx_host_if_cfg_bitmap(struct wl1271 *wl, u32 host_cfg_bitmap);
 int wl1271_acx_init_rx_interrupt(struct wl1271 *wl);
 int wl1271_acx_smart_reflex(struct wl1271 *wl);
 int wl1271_acx_bet_enable(struct wl1271 *wl, struct wl12xx_vif *wlvif,

drivers/net/wireless/wl12xx/boot.c → drivers/net/wireless/ti/wlcore/boot.c

@@ -27,42 +27,25 @@
 
 #include "debug.h"
 #include "acx.h"
-#include "reg.h"
 #include "boot.h"
 #include "io.h"
 #include "event.h"
 #include "rx.h"
+#include "hw_ops.h"
 
 static void wl1271_boot_set_ecpu_ctrl(struct wl1271 *wl, u32 flag)
 {
 	u32 cpu_ctrl;
 
 	/* 10.5.0 run the firmware (I) */
-	cpu_ctrl = wl1271_read32(wl, ACX_REG_ECPU_CONTROL);
+	cpu_ctrl = wlcore_read_reg(wl, REG_ECPU_CONTROL);
 
 	/* 10.5.1 run the firmware (II) */
 	cpu_ctrl |= flag;
-	wl1271_write32(wl, ACX_REG_ECPU_CONTROL, cpu_ctrl);
+	wlcore_write_reg(wl, REG_ECPU_CONTROL, cpu_ctrl);
 }
 
-static unsigned int wl12xx_get_fw_ver_quirks(struct wl1271 *wl)
-{
-	unsigned int quirks = 0;
-	unsigned int *fw_ver = wl->chip.fw_ver;
-
-	/* Only new station firmwares support routing fw logs to the host */
-	if ((fw_ver[FW_VER_IF_TYPE] == FW_VER_IF_TYPE_STA) &&
-	    (fw_ver[FW_VER_MINOR] < FW_VER_MINOR_FWLOG_STA_MIN))
-		quirks |= WL12XX_QUIRK_FWLOG_NOT_IMPLEMENTED;
-
-	/* This feature is not yet supported for AP mode */
-	if (fw_ver[FW_VER_IF_TYPE] == FW_VER_IF_TYPE_AP)
-		quirks |= WL12XX_QUIRK_FWLOG_NOT_IMPLEMENTED;
-
-	return quirks;
-}
-
-static void wl1271_parse_fw_ver(struct wl1271 *wl)
+static int wlcore_parse_fw_ver(struct wl1271 *wl)
 {
 	int ret;
 
@@ -74,33 +57,49 @@ static void wl1271_parse_fw_ver(struct wl1271 *wl)
 	if (ret != 5) {
 		wl1271_warning("fw version incorrect value");
 		memset(wl->chip.fw_ver, 0, sizeof(wl->chip.fw_ver));
-		return;
+		return -EINVAL;
 	}
 
-	/* Check if any quirks are needed with older fw versions */
-	wl->quirks |= wl12xx_get_fw_ver_quirks(wl);
+	ret = wlcore_identify_fw(wl);
+	if (ret < 0)
+		return ret;
+
+	return 0;
 }
 
-static void wl1271_boot_fw_version(struct wl1271 *wl)
+static int wlcore_boot_fw_version(struct wl1271 *wl)
 {
-	struct wl1271_static_data static_data;
+	struct wl1271_static_data *static_data;
+	int ret;
 
-	wl1271_read(wl, wl->cmd_box_addr, &static_data, sizeof(static_data),
+	static_data = kmalloc(sizeof(*static_data), GFP_DMA);
+	if (!static_data) {
+		wl1271_error("Couldn't allocate memory for static data!");
+		return -ENOMEM;
+	}
+
+	wl1271_read(wl, wl->cmd_box_addr, static_data, sizeof(*static_data),
 		    false);
 
-	strncpy(wl->chip.fw_ver_str, static_data.fw_version,
+	strncpy(wl->chip.fw_ver_str, static_data->fw_version,
 		sizeof(wl->chip.fw_ver_str));
 
+	kfree(static_data);
+
 	/* make sure the string is NULL-terminated */
 	wl->chip.fw_ver_str[sizeof(wl->chip.fw_ver_str) - 1] = '\0';
 
-	wl1271_parse_fw_ver(wl);
+	ret = wlcore_parse_fw_ver(wl);
+	if (ret < 0)
+		return ret;
+
+	return 0;
 }
 
 static int wl1271_boot_upload_firmware_chunk(struct wl1271 *wl, void *buf,
 					     size_t fw_data_len, u32 dest)
 {
-	struct wl1271_partition_set partition;
+	struct wlcore_partition_set partition;
 	int addr, chunk_num, partition_limit;
 	u8 *p, *chunk;
 
@@ -122,13 +121,13 @@ static int wl1271_boot_upload_firmware_chunk(struct wl1271 *wl, void *buf,
 		return -ENOMEM;
 	}
 
-	memcpy(&partition, &wl12xx_part_table[PART_DOWN], sizeof(partition));
+	memcpy(&partition, &wl->ptable[PART_DOWN], sizeof(partition));
 	partition.mem.start = dest;
-	wl1271_set_partition(wl, &partition);
+	wlcore_set_partition(wl, &partition);
 
 	/* 10.1 set partition limit and chunk num */
 	chunk_num = 0;
-	partition_limit = wl12xx_part_table[PART_DOWN].mem.size;
+	partition_limit = wl->ptable[PART_DOWN].mem.size;
 
 	while (chunk_num < fw_data_len / CHUNK_SIZE) {
 		/* 10.2 update partition, if needed */
@@ -136,9 +135,9 @@ static int wl1271_boot_upload_firmware_chunk(struct wl1271 *wl, void *buf,
 		if (addr > partition_limit) {
 			addr = dest + chunk_num * CHUNK_SIZE;
 			partition_limit = chunk_num * CHUNK_SIZE +
-				wl12xx_part_table[PART_DOWN].mem.size;
+				wl->ptable[PART_DOWN].mem.size;
 			partition.mem.start = addr;
-			wl1271_set_partition(wl, &partition);
+			wlcore_set_partition(wl, &partition);
 		}
 
 		/* 10.3 upload the chunk */
@@ -164,7 +163,7 @@ static int wl1271_boot_upload_firmware_chunk(struct wl1271 *wl, void *buf,
 	return 0;
 }
 
-static int wl1271_boot_upload_firmware(struct wl1271 *wl)
+int wlcore_boot_upload_firmware(struct wl1271 *wl)
 {
 	u32 chunks, addr, len;
 	int ret = 0;
@@ -196,8 +195,9 @@ static int wl1271_boot_upload_firmware(struct wl1271 *wl)
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(wlcore_boot_upload_firmware);
 
-static int wl1271_boot_upload_nvs(struct wl1271 *wl)
+int wlcore_boot_upload_nvs(struct wl1271 *wl)
 {
 	size_t nvs_len, burst_len;
 	int i;
@@ -207,27 +207,7 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl)
 	if (wl->nvs == NULL)
 		return -ENODEV;
 
-	if (wl->chip.id == CHIP_ID_1283_PG20) {
-		struct wl128x_nvs_file *nvs = (struct wl128x_nvs_file *)wl->nvs;
-
-		if (wl->nvs_len == sizeof(struct wl128x_nvs_file)) {
-			if (nvs->general_params.dual_mode_select)
-				wl->enable_11a = true;
-		} else {
-			wl1271_error("nvs size is not as expected: %zu != %zu",
-				     wl->nvs_len,
-				     sizeof(struct wl128x_nvs_file));
-			kfree(wl->nvs);
-			wl->nvs = NULL;
-			wl->nvs_len = 0;
-			return -EILSEQ;
-		}
-
-		/* only the first part of the NVS needs to be uploaded */
-		nvs_len = sizeof(nvs->nvs);
-		nvs_ptr = (u8 *)nvs->nvs;
-
-	} else {
+	if (wl->quirks & WLCORE_QUIRK_LEGACY_NVS) {
 		struct wl1271_nvs_file *nvs =
 			(struct wl1271_nvs_file *)wl->nvs;
 		/*
@@ -255,6 +235,25 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl)
 		/* only the first part of the NVS needs to be uploaded */
 		nvs_len = sizeof(nvs->nvs);
 		nvs_ptr = (u8 *) nvs->nvs;
+	} else {
+		struct wl128x_nvs_file *nvs = (struct wl128x_nvs_file *)wl->nvs;
+
+		if (wl->nvs_len == sizeof(struct wl128x_nvs_file)) {
+			if (nvs->general_params.dual_mode_select)
+				wl->enable_11a = true;
+		} else {
+			wl1271_error("nvs size is not as expected: %zu != %zu",
+				     wl->nvs_len,
+				     sizeof(struct wl128x_nvs_file));
+			kfree(wl->nvs);
+			wl->nvs = NULL;
+			wl->nvs_len = 0;
+			return -EILSEQ;
+		}
+
+		/* only the first part of the NVS needs to be uploaded */
+		nvs_len = sizeof(nvs->nvs);
+		nvs_ptr = (u8 *)nvs->nvs;
 	}
 
 	/* update current MAC address to NVS */
@@ -281,9 +280,10 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl)
 
 		/*
 		 * Due to our new wl1271_translate_reg_addr function,
-		 * we need to add the REGISTER_BASE to the destination
+		 * we need to add the register partition start address
+		 * to the destination
 		 */
-		dest_addr += REGISTERS_BASE;
+		dest_addr += wl->curr_part.reg.start;
 
 		/* We move our pointer to the data */
 		nvs_ptr += 3;
@@ -324,7 +324,7 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl)
 	nvs_len -= nvs_ptr - (u8 *)wl->nvs;
 
 	/* Now we must set the partition correctly */
-	wl1271_set_partition(wl, &wl12xx_part_table[PART_WORK]);
+	wlcore_set_partition(wl, &wl->ptable[PART_WORK]);
 
 	/* Copy the NVS tables to a new block to ensure alignment */
 	nvs_aligned = kmemdup(nvs_ptr, nvs_len, GFP_KERNEL);
@@ -332,7 +332,8 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl)
 		return -ENOMEM;
 
 	/* And finally we upload the NVS tables */
-	wl1271_write(wl, CMD_MBOX_ADDRESS, nvs_aligned, nvs_len, false);
+	wlcore_write_data(wl, REG_CMD_MBOX_ADDRESS,
+			  nvs_aligned, nvs_len, false);
 
 	kfree(nvs_aligned);
 	return 0;
@@ -341,58 +342,19 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl)
 	wl1271_error("nvs data is malformed");
 	return -EILSEQ;
 }
+EXPORT_SYMBOL_GPL(wlcore_boot_upload_nvs);
 
-static void wl1271_boot_enable_interrupts(struct wl1271 *wl)
-{
-	wl1271_enable_interrupts(wl);
-	wl1271_write32(wl, ACX_REG_INTERRUPT_MASK,
-		       WL1271_ACX_INTR_ALL & ~(WL1271_INTR_MASK));
-	wl1271_write32(wl, HI_CFG, HI_CFG_DEF_VAL);
-}
-
-static int wl1271_boot_soft_reset(struct wl1271 *wl)
-{
-	unsigned long timeout;
-	u32 boot_data;
-
-	/* perform soft reset */
-	wl1271_write32(wl, ACX_REG_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT);
-
-	/* SOFT_RESET is self clearing */
-	timeout = jiffies + usecs_to_jiffies(SOFT_RESET_MAX_TIME);
-	while (1) {
-		boot_data = wl1271_read32(wl, ACX_REG_SLV_SOFT_RESET);
-		wl1271_debug(DEBUG_BOOT, "soft reset bootdata 0x%x", boot_data);
-		if ((boot_data & ACX_SLV_SOFT_RESET_BIT) == 0)
-			break;
-
-		if (time_after(jiffies, timeout)) {
-			/* 1.2 check pWhalBus->uSelfClearTime if the
-			 * timeout was reached */
-			wl1271_error("soft reset timeout");
-			return -1;
-		}
-
-		udelay(SOFT_RESET_STALL_TIME);
-	}
-
-	/* disable Rx/Tx */
-	wl1271_write32(wl, ENABLE, 0x0);
-
-	/* disable auto calibration on start*/
-	wl1271_write32(wl, SPARE_A2, 0xffff);
-
-	return 0;
-}
-
-static int wl1271_boot_run_firmware(struct wl1271 *wl)
+int wlcore_boot_run_firmware(struct wl1271 *wl)
 {
 	int loop, ret;
 	u32 chip_id, intr;
 
+	/* Make sure we have the boot partition */
+	wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
+
 	wl1271_boot_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT);
 
-	chip_id = wl1271_read32(wl, CHIP_ID_B);
+	chip_id = wlcore_read_reg(wl, REG_CHIP_ID_B);
 
 	wl1271_debug(DEBUG_BOOT, "chip id after firmware boot: 0x%x", chip_id);
 
@@ -405,7 +367,7 @@ static int wl1271_boot_run_firmware(struct wl1271 *wl)
 	loop = 0;
 	while (loop++ < INIT_LOOP) {
 		udelay(INIT_LOOP_DELAY);
-		intr = wl1271_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+		intr = wlcore_read_reg(wl, REG_INTERRUPT_NO_CLEAR);
 
 		if (intr == 0xffffffff) {
 			wl1271_error("error reading hardware complete "
@@ -414,8 +376,8 @@ static int wl1271_boot_run_firmware(struct wl1271 *wl)
 		}
 		/* check that ACX_INTR_INIT_COMPLETE is enabled */
 		else if (intr & WL1271_ACX_INTR_INIT_COMPLETE) {
-			wl1271_write32(wl, ACX_REG_INTERRUPT_ACK,
-				       WL1271_ACX_INTR_INIT_COMPLETE);
+			wlcore_write_reg(wl, REG_INTERRUPT_ACK,
+					 WL1271_ACX_INTR_INIT_COMPLETE);
 			break;
 		}
 	}
@@ -427,18 +389,22 @@ static int wl1271_boot_run_firmware(struct wl1271 *wl)
 	}
 
 	/* get hardware config command mail box */
-	wl->cmd_box_addr = wl1271_read32(wl, REG_COMMAND_MAILBOX_PTR);
+	wl->cmd_box_addr = wlcore_read_reg(wl, REG_COMMAND_MAILBOX_PTR);
 
-	/* get hardware config event mail box */
-	wl->event_box_addr = wl1271_read32(wl, REG_EVENT_MAILBOX_PTR);
+	wl1271_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x", wl->cmd_box_addr);
 
-	/* set the working partition to its "running" mode offset */
-	wl1271_set_partition(wl, &wl12xx_part_table[PART_WORK]);
+	/* get hardware config event mail box */
+	wl->mbox_ptr[0] = wlcore_read_reg(wl, REG_EVENT_MAILBOX_PTR);
+	wl->mbox_ptr[1] = wl->mbox_ptr[0] + sizeof(struct event_mailbox);
 
-	wl1271_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x event_box_addr 0x%x",
-		     wl->cmd_box_addr, wl->event_box_addr);
+	wl1271_debug(DEBUG_MAILBOX, "MBOX ptrs: 0x%x 0x%x",
+		     wl->mbox_ptr[0], wl->mbox_ptr[1]);
 
-	wl1271_boot_fw_version(wl);
+	ret = wlcore_boot_fw_version(wl);
+	if (ret < 0) {
+		wl1271_error("couldn't boot firmware");
+		return ret;
+	}
 
 	/*
 	 * in case of full asynchronous mode the firmware event must be
@@ -468,319 +434,10 @@ static int wl1271_boot_run_firmware(struct wl1271 *wl)
 		return ret;
 	}
 
-	wl1271_event_mbox_config(wl);
+	/* set the working partition to its "running" mode offset */
+	wlcore_set_partition(wl, &wl->ptable[PART_WORK]);
 
 	/* firmware startup completed */
 	return 0;
 }
-
-static int wl1271_boot_write_irq_polarity(struct wl1271 *wl)
-{
-	u32 polarity;
-
-	polarity = wl1271_top_reg_read(wl, OCP_REG_POLARITY);
-
-	/* We use HIGH polarity, so unset the LOW bit */
-	polarity &= ~POLARITY_LOW;
-	wl1271_top_reg_write(wl, OCP_REG_POLARITY, polarity);
-
-	return 0;
-}
-
-static int wl128x_switch_tcxo_to_fref(struct wl1271 *wl)
-{
-	u16 spare_reg;
-
-	/* Mask bits [2] & [8:4] in the sys_clk_cfg register */
-	spare_reg = wl1271_top_reg_read(wl, WL_SPARE_REG);
-	if (spare_reg == 0xFFFF)
-		return -EFAULT;
-	spare_reg |= (BIT(3) | BIT(5) | BIT(6));
-	wl1271_top_reg_write(wl, WL_SPARE_REG, spare_reg);
-
-	/* Enable FREF_CLK_REQ & mux MCS and coex PLLs to FREF */
-	wl1271_top_reg_write(wl, SYS_CLK_CFG_REG,
-			     WL_CLK_REQ_TYPE_PG2 | MCS_PLL_CLK_SEL_FREF);
-
-	/* Delay execution for 15msec, to let the HW settle */
-	mdelay(15);
-
-	return 0;
-}
-
-static bool wl128x_is_tcxo_valid(struct wl1271 *wl)
-{
-	u16 tcxo_detection;
-
-	tcxo_detection = wl1271_top_reg_read(wl, TCXO_CLK_DETECT_REG);
-	if (tcxo_detection & TCXO_DET_FAILED)
-		return false;
-
-	return true;
-}
-
-static bool wl128x_is_fref_valid(struct wl1271 *wl)
-{
-	u16 fref_detection;
-
-	fref_detection = wl1271_top_reg_read(wl, FREF_CLK_DETECT_REG);
-	if (fref_detection & FREF_CLK_DETECT_FAIL)
-		return false;
-
-	return true;
-}
-
-static int wl128x_manually_configure_mcs_pll(struct wl1271 *wl)
-{
-	wl1271_top_reg_write(wl, MCS_PLL_M_REG, MCS_PLL_M_REG_VAL);
-	wl1271_top_reg_write(wl, MCS_PLL_N_REG, MCS_PLL_N_REG_VAL);
-	wl1271_top_reg_write(wl, MCS_PLL_CONFIG_REG, MCS_PLL_CONFIG_REG_VAL);
-
-	return 0;
-}
-
-static int wl128x_configure_mcs_pll(struct wl1271 *wl, int clk)
-{
-	u16 spare_reg;
-	u16 pll_config;
-	u8 input_freq;
-
-	/* Mask bits [3:1] in the sys_clk_cfg register */
-	spare_reg = wl1271_top_reg_read(wl, WL_SPARE_REG);
-	if (spare_reg == 0xFFFF)
-		return -EFAULT;
-	spare_reg |= BIT(2);
-	wl1271_top_reg_write(wl, WL_SPARE_REG, spare_reg);
-
-	/* Handle special cases of the TCXO clock */
-	if (wl->tcxo_clock == WL12XX_TCXOCLOCK_16_8 ||
-	    wl->tcxo_clock == WL12XX_TCXOCLOCK_33_6)
-		return wl128x_manually_configure_mcs_pll(wl);
-
-	/* Set the input frequency according to the selected clock source */
-	input_freq = (clk & 1) + 1;
-
-	pll_config = wl1271_top_reg_read(wl, MCS_PLL_CONFIG_REG);
-	if (pll_config == 0xFFFF)
-		return -EFAULT;
-	pll_config |= (input_freq << MCS_SEL_IN_FREQ_SHIFT);
-	pll_config |= MCS_PLL_ENABLE_HP;
-	wl1271_top_reg_write(wl, MCS_PLL_CONFIG_REG, pll_config);
-
-	return 0;
-}
-
-/*
- * WL128x has two clocks input - TCXO and FREF.
- * TCXO is the main clock of the device, while FREF is used to sync
- * between the GPS and the cellular modem.
- * In cases where TCXO is 32.736MHz or 16.368MHz, the FREF will be used
- * as the WLAN/BT main clock.
- */
-static int wl128x_boot_clk(struct wl1271 *wl, int *selected_clock)
-{
-	u16 sys_clk_cfg;
-
-	/* For XTAL-only modes, FREF will be used after switching from TCXO */
-	if (wl->ref_clock == WL12XX_REFCLOCK_26_XTAL ||
-	    wl->ref_clock == WL12XX_REFCLOCK_38_XTAL) {
-		if (!wl128x_switch_tcxo_to_fref(wl))
-			return -EINVAL;
-		goto fref_clk;
-	}
-
-	/* Query the HW, to determine which clock source we should use */
-	sys_clk_cfg = wl1271_top_reg_read(wl, SYS_CLK_CFG_REG);
-	if (sys_clk_cfg == 0xFFFF)
-		return -EINVAL;
-	if (sys_clk_cfg & PRCM_CM_EN_MUX_WLAN_FREF)
-		goto fref_clk;
-
-	/* If TCXO is either 32.736MHz or 16.368MHz, switch to FREF */
-	if (wl->tcxo_clock == WL12XX_TCXOCLOCK_16_368 ||
-	    wl->tcxo_clock == WL12XX_TCXOCLOCK_32_736) {
-		if (!wl128x_switch_tcxo_to_fref(wl))
-			return -EINVAL;
-		goto fref_clk;
-	}
-
-	/* TCXO clock is selected */
-	if (!wl128x_is_tcxo_valid(wl))
-		return -EINVAL;
-	*selected_clock = wl->tcxo_clock;
-	goto config_mcs_pll;
-
-fref_clk:
-	/* FREF clock is selected */
-	if (!wl128x_is_fref_valid(wl))
-		return -EINVAL;
-	*selected_clock = wl->ref_clock;
-
-config_mcs_pll:
-	return wl128x_configure_mcs_pll(wl, *selected_clock);
-}
-
-static int wl127x_boot_clk(struct wl1271 *wl)
-{
-	u32 pause;
-	u32 clk;
-
-	if (WL127X_PG_GET_MAJOR(wl->hw_pg_ver) < 3)
-		wl->quirks |= WL12XX_QUIRK_END_OF_TRANSACTION;
-
-	if (wl->ref_clock == CONF_REF_CLK_19_2_E ||
-	    wl->ref_clock == CONF_REF_CLK_38_4_E ||
-	    wl->ref_clock == CONF_REF_CLK_38_4_M_XTAL)
-		/* ref clk: 19.2/38.4/38.4-XTAL */
-		clk = 0x3;
-	else if (wl->ref_clock == CONF_REF_CLK_26_E ||
-		 wl->ref_clock == CONF_REF_CLK_52_E)
-		/* ref clk: 26/52 */
-		clk = 0x5;
-	else
-		return -EINVAL;
-
-	if (wl->ref_clock != CONF_REF_CLK_19_2_E) {
-		u16 val;
-		/* Set clock type (open drain) */
-		val = wl1271_top_reg_read(wl, OCP_REG_CLK_TYPE);
-		val &= FREF_CLK_TYPE_BITS;
-		wl1271_top_reg_write(wl, OCP_REG_CLK_TYPE, val);
-
-		/* Set clock pull mode (no pull) */
-		val = wl1271_top_reg_read(wl, OCP_REG_CLK_PULL);
-		val |= NO_PULL;
-		wl1271_top_reg_write(wl, OCP_REG_CLK_PULL, val);
-	} else {
-		u16 val;
-		/* Set clock polarity */
-		val = wl1271_top_reg_read(wl, OCP_REG_CLK_POLARITY);
-		val &= FREF_CLK_POLARITY_BITS;
-		val |= CLK_REQ_OUTN_SEL;
-		wl1271_top_reg_write(wl, OCP_REG_CLK_POLARITY, val);
-	}
-
-	wl1271_write32(wl, PLL_PARAMETERS, clk);
-
-	pause = wl1271_read32(wl, PLL_PARAMETERS);
-
-	wl1271_debug(DEBUG_BOOT, "pause1 0x%x", pause);
-
-	pause &= ~(WU_COUNTER_PAUSE_VAL);
-	pause |= WU_COUNTER_PAUSE_VAL;
-	wl1271_write32(wl, WU_COUNTER_PAUSE, pause);
-
-	return 0;
-}
-
-/* uploads NVS and firmware */
-int wl1271_load_firmware(struct wl1271 *wl)
-{
-	int ret = 0;
-	u32 tmp, clk;
-	int selected_clock = -1;
-
-	if (wl->chip.id == CHIP_ID_1283_PG20) {
-		ret = wl128x_boot_clk(wl, &selected_clock);
-		if (ret < 0)
-			goto out;
-	} else {
-		ret = wl127x_boot_clk(wl);
-		if (ret < 0)
-			goto out;
-	}
-
-	/* Continue the ELP wake up sequence */
-	wl1271_write32(wl, WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
-	udelay(500);
-
-	wl1271_set_partition(wl, &wl12xx_part_table[PART_DRPW]);
-
-	/* Read-modify-write DRPW_SCRATCH_START register (see next state)
-	   to be used by DRPw FW. The RTRIM value will be added by the FW
-	   before taking DRPw out of reset */
-
-	wl1271_debug(DEBUG_BOOT, "DRPW_SCRATCH_START %08x", DRPW_SCRATCH_START);
-	clk = wl1271_read32(wl, DRPW_SCRATCH_START);
-
-	wl1271_debug(DEBUG_BOOT, "clk2 0x%x", clk);
-
-	if (wl->chip.id == CHIP_ID_1283_PG20) {
-		clk |= ((selected_clock & 0x3) << 1) << 4;
-	} else {
-		clk |= (wl->ref_clock << 1) << 4;
-	}
-
-	wl1271_write32(wl, DRPW_SCRATCH_START, clk);
-
-	wl1271_set_partition(wl, &wl12xx_part_table[PART_WORK]);
-
-	/* Disable interrupts */
-	wl1271_write32(wl, ACX_REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL);
-
-	ret = wl1271_boot_soft_reset(wl);
-	if (ret < 0)
-		goto out;
-
-	/* 2. start processing NVS file */
-	ret = wl1271_boot_upload_nvs(wl);
-	if (ret < 0)
-		goto out;
-
-	/* write firmware's last address (ie. it's length) to
-	 * ACX_EEPROMLESS_IND_REG */
-	wl1271_debug(DEBUG_BOOT, "ACX_EEPROMLESS_IND_REG");
-
-	wl1271_write32(wl, ACX_EEPROMLESS_IND_REG, ACX_EEPROMLESS_IND_REG);
-
-	tmp = wl1271_read32(wl, CHIP_ID_B);
-
-	wl1271_debug(DEBUG_BOOT, "chip id 0x%x", tmp);
-
-	/* 6. read the EEPROM parameters */
-	tmp = wl1271_read32(wl, SCR_PAD2);
-
-	/* WL1271: The reference driver skips steps 7 to 10 (jumps directly
-	 * to upload_fw) */
-
-	if (wl->chip.id == CHIP_ID_1283_PG20)
-		wl1271_top_reg_write(wl, SDIO_IO_DS, wl->conf.hci_io_ds);
-
-	ret = wl1271_boot_upload_firmware(wl);
-	if (ret < 0)
-		goto out;
-
-out:
-	return ret;
-}
-EXPORT_SYMBOL_GPL(wl1271_load_firmware);
-
-int wl1271_boot(struct wl1271 *wl)
-{
-	int ret;
-
-	/* upload NVS and firmware */
-	ret = wl1271_load_firmware(wl);
-	if (ret)
-		return ret;
-
-	/* 10.5 start firmware */
-	ret = wl1271_boot_run_firmware(wl);
-	if (ret < 0)
-		goto out;
-
-	ret = wl1271_boot_write_irq_polarity(wl);
-	if (ret < 0)
-		goto out;
-
-	wl1271_write32(wl, ACX_REG_INTERRUPT_MASK,
-		       WL1271_ACX_ALL_EVENTS_VECTOR);
-
-	/* Enable firmware interrupts now */
-	wl1271_boot_enable_interrupts(wl);
-
-	wl1271_event_mbox_config(wl);
-
-out:
-	return ret;
-}
+EXPORT_SYMBOL_GPL(wlcore_boot_run_firmware);

drivers/net/wireless/ti/wlcore/boot.h

+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __BOOT_H__
+#define __BOOT_H__
+
+#include "wlcore.h"
+
+int wlcore_boot_upload_firmware(struct wl1271 *wl);
+int wlcore_boot_upload_nvs(struct wl1271 *wl);
+int wlcore_boot_run_firmware(struct wl1271 *wl);
+
+#define WL1271_NO_SUBBANDS 8
+#define WL1271_NO_POWER_LEVELS 4
+#define WL1271_FW_VERSION_MAX_LEN 20
+
+struct wl1271_static_data {
+	u8 mac_address[ETH_ALEN];
+	u8 padding[2];
+	u8 fw_version[WL1271_FW_VERSION_MAX_LEN];
+	u32 hw_version;
+	u8 tx_power_table[WL1271_NO_SUBBANDS][WL1271_NO_POWER_LEVELS];
+};
+
+/* number of times we try to read the INIT interrupt */
+#define INIT_LOOP 20000
+
+/* delay between retries */
+#define INIT_LOOP_DELAY 50
+
+#define WU_COUNTER_PAUSE_VAL 0x3FF
+#define WELP_ARM_COMMAND_VAL 0x4
+
+#endif

drivers/net/wireless/wl12xx/cmd.c → drivers/net/wireless/ti/wlcore/cmd.c

@@ -28,9 +28,8 @@
 #include <linux/ieee80211.h>
 #include <linux/slab.h>
 
-#include "wl12xx.h"
+#include "wlcore.h"
 #include "debug.h"
-#include "reg.h"
 #include "io.h"
 #include "acx.h"
 #include "wl12xx_80211.h"
@@ -67,11 +66,15 @@ int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
 
 	wl1271_write(wl, wl->cmd_box_addr, buf, len, false);
 
-	wl1271_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD);
+	/*
+	 * TODO: we just need this because one bit is in a different
+	 * place.  Is there any better way?
+	 */
+	wl->ops->trigger_cmd(wl, wl->cmd_box_addr, buf, len);
 
 	timeout = jiffies + msecs_to_jiffies(WL1271_COMMAND_TIMEOUT);
 
-	intr = wl1271_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+	intr = wlcore_read_reg(wl, REG_INTERRUPT_NO_CLEAR);
 	while (!(intr & WL1271_ACX_INTR_CMD_COMPLETE)) {
 		if (time_after(jiffies, timeout)) {
 			wl1271_error("command complete timeout");
@@ -85,7 +88,7 @@ int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
 		else
 			msleep(1);
 
-		intr = wl1271_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+		intr = wlcore_read_reg(wl, REG_INTERRUPT_NO_CLEAR);
 	}
 
 	/* read back the status code of the command */
@@ -100,8 +103,7 @@ int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
 		goto fail;
 	}
 
-	wl1271_write32(wl, ACX_REG_INTERRUPT_ACK,
-		       WL1271_ACX_INTR_CMD_COMPLETE);
+	wlcore_write_reg(wl, REG_INTERRUPT_ACK, WL1271_ACX_INTR_CMD_COMPLETE);
 	return 0;
 
 fail:
@@ -110,240 +112,18 @@ int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
 	return ret;
 }
 
-int wl1271_cmd_general_parms(struct wl1271 *wl)
-{
-	struct wl1271_general_parms_cmd *gen_parms;
-	struct wl1271_ini_general_params *gp =
-		&((struct wl1271_nvs_file *)wl->nvs)->general_params;
-	bool answer = false;
-	int ret;
-
-	if (!wl->nvs)
-		return -ENODEV;
-
-	if (gp->tx_bip_fem_manufacturer >= WL1271_INI_FEM_MODULE_COUNT) {
-		wl1271_warning("FEM index from INI out of bounds");
-		return -EINVAL;
-	}
-
-	gen_parms = kzalloc(sizeof(*gen_parms), GFP_KERNEL);
-	if (!gen_parms)
-		return -ENOMEM;
-
-	gen_parms->test.id = TEST_CMD_INI_FILE_GENERAL_PARAM;
-
-	memcpy(&gen_parms->general_params, gp, sizeof(*gp));
-
-	if (gp->tx_bip_fem_auto_detect)
-		answer = true;
-
-	/* Override the REF CLK from the NVS with the one from platform data */
-	gen_parms->general_params.ref_clock = wl->ref_clock;
-
-	ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), answer);
-	if (ret < 0) {
-		wl1271_warning("CMD_INI_FILE_GENERAL_PARAM failed");
-		goto out;
-	}
-
-	gp->tx_bip_fem_manufacturer =
-		gen_parms->general_params.tx_bip_fem_manufacturer;
-
-	if (gp->tx_bip_fem_manufacturer >= WL1271_INI_FEM_MODULE_COUNT) {
-		wl1271_warning("FEM index from FW out of bounds");
-		ret = -EINVAL;
-		goto out;
-	}
-
-	wl1271_debug(DEBUG_CMD, "FEM autodetect: %s, manufacturer: %d\n",
-		     answer ? "auto" : "manual", gp->tx_bip_fem_manufacturer);
-
-out:
-	kfree(gen_parms);
-	return ret;
-}
-
-int wl128x_cmd_general_parms(struct wl1271 *wl)
-{
-	struct wl128x_general_parms_cmd *gen_parms;
-	struct wl128x_ini_general_params *gp =
-		&((struct wl128x_nvs_file *)wl->nvs)->general_params;
-	bool answer = false;
-	int ret;
-
-	if (!wl->nvs)
-		return -ENODEV;
-
-	if (gp->tx_bip_fem_manufacturer >= WL1271_INI_FEM_MODULE_COUNT) {
-		wl1271_warning("FEM index from ini out of bounds");
-		return -EINVAL;
-	}
-
-	gen_parms = kzalloc(sizeof(*gen_parms), GFP_KERNEL);
-	if (!gen_parms)
-		return -ENOMEM;
-
-	gen_parms->test.id = TEST_CMD_INI_FILE_GENERAL_PARAM;
-
-	memcpy(&gen_parms->general_params, gp, sizeof(*gp));
-
-	if (gp->tx_bip_fem_auto_detect)
-		answer = true;
-
-	/* Replace REF and TCXO CLKs with the ones from platform data */
-	gen_parms->general_params.ref_clock = wl->ref_clock;
-	gen_parms->general_params.tcxo_ref_clock = wl->tcxo_clock;
-
-	ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), answer);
-	if (ret < 0) {
-		wl1271_warning("CMD_INI_FILE_GENERAL_PARAM failed");
-		goto out;
-	}
-
-	gp->tx_bip_fem_manufacturer =
-		gen_parms->general_params.tx_bip_fem_manufacturer;
-
-	if (gp->tx_bip_fem_manufacturer >= WL1271_INI_FEM_MODULE_COUNT) {
-		wl1271_warning("FEM index from FW out of bounds");
-		ret = -EINVAL;
-		goto out;
-	}
-
-	wl1271_debug(DEBUG_CMD, "FEM autodetect: %s, manufacturer: %d\n",
-		     answer ? "auto" : "manual", gp->tx_bip_fem_manufacturer);
-
-out:
-	kfree(gen_parms);
-	return ret;
-}
-
-int wl1271_cmd_radio_parms(struct wl1271 *wl)
-{
-	struct wl1271_nvs_file *nvs = (struct wl1271_nvs_file *)wl->nvs;
-	struct wl1271_radio_parms_cmd *radio_parms;
-	struct wl1271_ini_general_params *gp = &nvs->general_params;
-	int ret;
-
-	if (!wl->nvs)
-		return -ENODEV;
-
-	radio_parms = kzalloc(sizeof(*radio_parms), GFP_KERNEL);
-	if (!radio_parms)
-		return -ENOMEM;
-
-	radio_parms->test.id = TEST_CMD_INI_FILE_RADIO_PARAM;
-
-	/* 2.4GHz parameters */
-	memcpy(&radio_parms->static_params_2, &nvs->stat_radio_params_2,
-	       sizeof(struct wl1271_ini_band_params_2));
-	memcpy(&radio_parms->dyn_params_2,
-	       &nvs->dyn_radio_params_2[gp->tx_bip_fem_manufacturer].params,
-	       sizeof(struct wl1271_ini_fem_params_2));
-
-	/* 5GHz parameters */
-	memcpy(&radio_parms->static_params_5,
-	       &nvs->stat_radio_params_5,
-	       sizeof(struct wl1271_ini_band_params_5));
-	memcpy(&radio_parms->dyn_params_5,
-	       &nvs->dyn_radio_params_5[gp->tx_bip_fem_manufacturer].params,
-	       sizeof(struct wl1271_ini_fem_params_5));
-
-	wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_RADIO_PARAM: ",
-		    radio_parms, sizeof(*radio_parms));
-
-	ret = wl1271_cmd_test(wl, radio_parms, sizeof(*radio_parms), 0);
-	if (ret < 0)
-		wl1271_warning("CMD_INI_FILE_RADIO_PARAM failed");
-
-	kfree(radio_parms);
-	return ret;
-}
-
-int wl128x_cmd_radio_parms(struct wl1271 *wl)
-{
-	struct wl128x_nvs_file *nvs = (struct wl128x_nvs_file *)wl->nvs;
-	struct wl128x_radio_parms_cmd *radio_parms;
-	struct wl128x_ini_general_params *gp = &nvs->general_params;
-	int ret;
-
-	if (!wl->nvs)
-		return -ENODEV;
-
-	radio_parms = kzalloc(sizeof(*radio_parms), GFP_KERNEL);
-	if (!radio_parms)
-		return -ENOMEM;
-
-	radio_parms->test.id = TEST_CMD_INI_FILE_RADIO_PARAM;
-
-	/* 2.4GHz parameters */
-	memcpy(&radio_parms->static_params_2, &nvs->stat_radio_params_2,
-	       sizeof(struct wl128x_ini_band_params_2));
-	memcpy(&radio_parms->dyn_params_2,
-	       &nvs->dyn_radio_params_2[gp->tx_bip_fem_manufacturer].params,
-	       sizeof(struct wl128x_ini_fem_params_2));
-
-	/* 5GHz parameters */
-	memcpy(&radio_parms->static_params_5,
-	       &nvs->stat_radio_params_5,
-	       sizeof(struct wl128x_ini_band_params_5));
-	memcpy(&radio_parms->dyn_params_5,
-	       &nvs->dyn_radio_params_5[gp->tx_bip_fem_manufacturer].params,
-	       sizeof(struct wl128x_ini_fem_params_5));
-
-	radio_parms->fem_vendor_and_options = nvs->fem_vendor_and_options;
-
-	wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_RADIO_PARAM: ",
-		    radio_parms, sizeof(*radio_parms));
-
-	ret = wl1271_cmd_test(wl, radio_parms, sizeof(*radio_parms), 0);
-	if (ret < 0)
-		wl1271_warning("CMD_INI_FILE_RADIO_PARAM failed");
-
-	kfree(radio_parms);
-	return ret;
-}
-
-int wl1271_cmd_ext_radio_parms(struct wl1271 *wl)
-{
-	struct wl1271_ext_radio_parms_cmd *ext_radio_parms;
-	struct conf_rf_settings *rf = &wl->conf.rf;
-	int ret;
-
-	if (!wl->nvs)
-		return -ENODEV;
-
-	ext_radio_parms = kzalloc(sizeof(*ext_radio_parms), GFP_KERNEL);
-	if (!ext_radio_parms)
-		return -ENOMEM;
-
-	ext_radio_parms->test.id = TEST_CMD_INI_FILE_RF_EXTENDED_PARAM;
-
-	memcpy(ext_radio_parms->tx_per_channel_power_compensation_2,
-	       rf->tx_per_channel_power_compensation_2,
-	       CONF_TX_PWR_COMPENSATION_LEN_2);
-	memcpy(ext_radio_parms->tx_per_channel_power_compensation_5,
-	       rf->tx_per_channel_power_compensation_5,
-	       CONF_TX_PWR_COMPENSATION_LEN_5);
-
-	wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_EXT_RADIO_PARAM: ",
-		    ext_radio_parms, sizeof(*ext_radio_parms));
-
-	ret = wl1271_cmd_test(wl, ext_radio_parms, sizeof(*ext_radio_parms), 0);
-	if (ret < 0)
-		wl1271_warning("TEST_CMD_INI_FILE_RF_EXTENDED_PARAM failed");
-
-	kfree(ext_radio_parms);
-	return ret;
-}
-
 /*
  * Poll the mailbox event field until any of the bits in the mask is set or a
  * timeout occurs (WL1271_EVENT_TIMEOUT in msecs)
  */
 static int wl1271_cmd_wait_for_event_or_timeout(struct wl1271 *wl, u32 mask)
 {
-	u32 events_vector, event;
+	u32 *events_vector;
+	u32 event;
 	unsigned long timeout;
+	int ret = 0;
+
+	events_vector = kmalloc(sizeof(*events_vector), GFP_DMA);
 
 	timeout = jiffies + msecs_to_jiffies(WL1271_EVENT_TIMEOUT);
 
@@ -351,21 +131,24 @@ static int wl1271_cmd_wait_for_event_or_timeout(struct wl1271 *wl, u32 mask)
 		if (time_after(jiffies, timeout)) {
 			wl1271_debug(DEBUG_CMD, "timeout waiting for event %d",
 				     (int)mask);
-			return -ETIMEDOUT;
+			ret = -ETIMEDOUT;
+			goto out;
 		}
 
 		msleep(1);
 
 		/* read from both event fields */
-		wl1271_read(wl, wl->mbox_ptr[0], &events_vector,
-			    sizeof(events_vector), false);
-		event = events_vector & mask;
-		wl1271_read(wl, wl->mbox_ptr[1], &events_vector,
-			    sizeof(events_vector), false);
-		event |= events_vector & mask;
+		wl1271_read(wl, wl->mbox_ptr[0], events_vector,
+			    sizeof(*events_vector), false);
+		event = *events_vector & mask;
+		wl1271_read(wl, wl->mbox_ptr[1], events_vector,
+			    sizeof(*events_vector), false);
+		event |= *events_vector & mask;
 	} while (!event);
 
-	return 0;
+out:
+	kfree(events_vector);
+	return ret;
 }
 
 static int wl1271_cmd_wait_for_event(struct wl1271 *wl, u32 mask)
@@ -522,7 +305,7 @@ static int wl12xx_cmd_role_start_dev(struct wl1271 *wl,
 
 	cmd->role_id = wlvif->dev_role_id;
 	if (wlvif->band == IEEE80211_BAND_5GHZ)
-		cmd->band = WL12XX_BAND_5GHZ;
+		cmd->band = WLCORE_BAND_5GHZ;
 	cmd->channel = wlvif->channel;
 
 	if (wlvif->dev_hlid == WL12XX_INVALID_LINK_ID) {
@@ -613,7 +396,7 @@ int wl12xx_cmd_role_start_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif)
 
 	cmd->role_id = wlvif->role_id;
 	if (wlvif->band == IEEE80211_BAND_5GHZ)
-		cmd->band = WL12XX_BAND_5GHZ;
+		cmd->band = WLCORE_BAND_5GHZ;
 	cmd->channel = wlvif->channel;
 	cmd->sta.basic_rate_set = cpu_to_le32(wlvif->basic_rate_set);
 	cmd->sta.beacon_interval = cpu_to_le16(wlvif->beacon_int);
@@ -750,14 +533,14 @@ int wl12xx_cmd_role_start_ap(struct wl1271 *wl, struct wl12xx_vif *wlvif)
 
 	switch (wlvif->band) {
 	case IEEE80211_BAND_2GHZ:
-		cmd->band = RADIO_BAND_2_4GHZ;
+		cmd->band = WLCORE_BAND_2_4GHZ;
 		break;
 	case IEEE80211_BAND_5GHZ:
-		cmd->band = RADIO_BAND_5GHZ;
+		cmd->band = WLCORE_BAND_5GHZ;
 		break;
 	default:
 		wl1271_warning("ap start - unknown band: %d", (int)wlvif->band);
-		cmd->band = RADIO_BAND_2_4GHZ;
+		cmd->band = WLCORE_BAND_2_4GHZ;
 		break;
 	}
 
@@ -830,7 +613,7 @@ int wl12xx_cmd_role_start_ibss(struct wl1271 *wl, struct wl12xx_vif *wlvif)
 
 	cmd->role_id = wlvif->role_id;
 	if (wlvif->band == IEEE80211_BAND_5GHZ)
-		cmd->band = WL12XX_BAND_5GHZ;
+		cmd->band = WLCORE_BAND_5GHZ;
 	cmd->channel = wlvif->channel;
 	cmd->ibss.basic_rate_set = cpu_to_le32(wlvif->basic_rate_set);
 	cmd->ibss.beacon_interval = cpu_to_le16(wlvif->beacon_int);
@@ -904,6 +687,7 @@ int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer)
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(wl1271_cmd_test);
 
 /**
  * read acx from firmware
@@ -960,6 +744,7 @@ int wl1271_cmd_configure(struct wl1271 *wl, u16 id, void *buf, size_t len)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(wl1271_cmd_configure);
 
 int wl1271_cmd_data_path(struct wl1271 *wl, bool enable)
 {
@@ -1730,10 +1515,10 @@ static int wl12xx_cmd_roc(struct wl1271 *wl, struct wl12xx_vif *wlvif,
 	cmd->channel = wlvif->channel;
 	switch (wlvif->band) {
 	case IEEE80211_BAND_2GHZ:
-		cmd->band = RADIO_BAND_2_4GHZ;
+		cmd->band = WLCORE_BAND_2_4GHZ;
 		break;
 	case IEEE80211_BAND_5GHZ:
-		cmd->band = RADIO_BAND_5GHZ;
+		cmd->band = WLCORE_BAND_5GHZ;
 		break;
 	default:
 		wl1271_error("roc - unknown band: %d", (int)wlvif->band);

drivers/net/wireless/wl12xx/cmd.h → drivers/net/wireless/ti/wlcore/cmd.h

@@ -25,17 +25,12 @@
 #ifndef __CMD_H__
 #define __CMD_H__
 
-#include "wl12xx.h"
+#include "wlcore.h"
 
 struct acx_header;
 
 int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
 		    size_t res_len);
-int wl1271_cmd_general_parms(struct wl1271 *wl);
-int wl128x_cmd_general_parms(struct wl1271 *wl);
-int wl1271_cmd_radio_parms(struct wl1271 *wl);
-int wl128x_cmd_radio_parms(struct wl1271 *wl);
-int wl1271_cmd_ext_radio_parms(struct wl1271 *wl);
 int wl12xx_cmd_role_enable(struct wl1271 *wl, u8 *addr, u8 role_type,
 			   u8 *role_id);
 int wl12xx_cmd_role_disable(struct wl1271 *wl, u8 *role_id);
@@ -262,13 +257,13 @@ struct wl12xx_cmd_role_disable {
 	u8 padding[3];
 } __packed;
 
-enum wl12xx_band {
-	WL12XX_BAND_2_4GHZ		= 0,
-	WL12XX_BAND_5GHZ		= 1,
-	WL12XX_BAND_JAPAN_4_9_GHZ	= 2,
-	WL12XX_BAND_DEFAULT		= WL12XX_BAND_2_4GHZ,
-	WL12XX_BAND_INVALID		= 0x7E,
-	WL12XX_BAND_MAX_RADIO		= 0x7F,
+enum wlcore_band {
+	WLCORE_BAND_2_4GHZ		= 0,
+	WLCORE_BAND_5GHZ		= 1,
+	WLCORE_BAND_JAPAN_4_9_GHZ	= 2,
+	WLCORE_BAND_DEFAULT		= WLCORE_BAND_2_4GHZ,
+	WLCORE_BAND_INVALID		= 0x7E,
+	WLCORE_BAND_MAX_RADIO		= 0x7F,
 };
 
 struct wl12xx_cmd_role_start {
@@ -494,83 +489,6 @@ enum wl1271_channel_tune_bands {
 
 #define WL1271_PD_REFERENCE_POINT_BAND_B_G  0
 
-#define TEST_CMD_INI_FILE_RADIO_PARAM       0x19
-#define TEST_CMD_INI_FILE_GENERAL_PARAM     0x1E
-#define TEST_CMD_INI_FILE_RF_EXTENDED_PARAM 0x26
-
-struct wl1271_general_parms_cmd {
-	struct wl1271_cmd_header header;
-
-	struct wl1271_cmd_test_header test;
-
-	struct wl1271_ini_general_params general_params;
-
-	u8 sr_debug_table[WL1271_INI_MAX_SMART_REFLEX_PARAM];
-	u8 sr_sen_n_p;
-	u8 sr_sen_n_p_gain;
-	u8 sr_sen_nrn;
-	u8 sr_sen_prn;
-	u8 padding[3];
-} __packed;
-
-struct wl128x_general_parms_cmd {
-	struct wl1271_cmd_header header;
-
-	struct wl1271_cmd_test_header test;
-
-	struct wl128x_ini_general_params general_params;
-
-	u8 sr_debug_table[WL1271_INI_MAX_SMART_REFLEX_PARAM];
-	u8 sr_sen_n_p;
-	u8 sr_sen_n_p_gain;
-	u8 sr_sen_nrn;
-	u8 sr_sen_prn;
-	u8 padding[3];
-} __packed;
-
-struct wl1271_radio_parms_cmd {
-	struct wl1271_cmd_header header;
-
-	struct wl1271_cmd_test_header test;
-
-	/* Static radio parameters */
-	struct wl1271_ini_band_params_2 static_params_2;
-	struct wl1271_ini_band_params_5 static_params_5;
-
-	/* Dynamic radio parameters */
-	struct wl1271_ini_fem_params_2 dyn_params_2;
-	u8 padding2;
-	struct wl1271_ini_fem_params_5 dyn_params_5;
-	u8 padding3[2];
-} __packed;
-
-struct wl128x_radio_parms_cmd {
-	struct wl1271_cmd_header header;
-
-	struct wl1271_cmd_test_header test;
-
-	/* Static radio parameters */
-	struct wl128x_ini_band_params_2 static_params_2;
-	struct wl128x_ini_band_params_5 static_params_5;
-
-	u8 fem_vendor_and_options;
-
-	/* Dynamic radio parameters */
-	struct wl128x_ini_fem_params_2 dyn_params_2;
-	u8 padding2;
-	struct wl128x_ini_fem_params_5 dyn_params_5;
-} __packed;
-
-struct wl1271_ext_radio_parms_cmd {
-	struct wl1271_cmd_header header;
-
-	struct wl1271_cmd_test_header test;
-
-	u8 tx_per_channel_power_compensation_2[CONF_TX_PWR_COMPENSATION_LEN_2];
-	u8 tx_per_channel_power_compensation_5[CONF_TX_PWR_COMPENSATION_LEN_5];
-	u8 padding[3];
-} __packed;
-
 /*
  * There are three types of disconnections:
  *

drivers/net/wireless/wl12xx/conf.h → drivers/net/wireless/ti/wlcore/conf.h

@@ -65,36 +65,7 @@ enum {
 	CONF_HW_RATE_INDEX_MAX     = CONF_HW_RATE_INDEX_54MBPS,
 };
 
-enum {
-	CONF_HW_RXTX_RATE_MCS7_SGI = 0,
-	CONF_HW_RXTX_RATE_MCS7,
-	CONF_HW_RXTX_RATE_MCS6,
-	CONF_HW_RXTX_RATE_MCS5,
-	CONF_HW_RXTX_RATE_MCS4,
-	CONF_HW_RXTX_RATE_MCS3,
-	CONF_HW_RXTX_RATE_MCS2,
-	CONF_HW_RXTX_RATE_MCS1,
-	CONF_HW_RXTX_RATE_MCS0,
-	CONF_HW_RXTX_RATE_54,
-	CONF_HW_RXTX_RATE_48,
-	CONF_HW_RXTX_RATE_36,
-	CONF_HW_RXTX_RATE_24,
-	CONF_HW_RXTX_RATE_22,
-	CONF_HW_RXTX_RATE_18,
-	CONF_HW_RXTX_RATE_12,
-	CONF_HW_RXTX_RATE_11,
-	CONF_HW_RXTX_RATE_9,
-	CONF_HW_RXTX_RATE_6,
-	CONF_HW_RXTX_RATE_5_5,
-	CONF_HW_RXTX_RATE_2,
-	CONF_HW_RXTX_RATE_1,
-	CONF_HW_RXTX_RATE_MAX,
-	CONF_HW_RXTX_RATE_UNSUPPORTED = 0xff
-};
-
-/* Rates between and including these are MCS rates */
-#define CONF_HW_RXTX_RATE_MCS_MIN CONF_HW_RXTX_RATE_MCS7_SGI
-#define CONF_HW_RXTX_RATE_MCS_MAX CONF_HW_RXTX_RATE_MCS0
+#define CONF_HW_RXTX_RATE_UNSUPPORTED 0xff
 
 enum {
 	CONF_SG_DISABLE = 0,
@@ -1096,16 +1067,31 @@ struct conf_scan_settings {
 };
 
 struct conf_sched_scan_settings {
-	/* minimum time to wait on the channel for active scans (in TUs) */
-	u16 min_dwell_time_active;
+	/*
+	 * The base time to wait on the channel for active scans (in TU/1000).
+	 * The minimum dwell time is calculated according to this:
+	 * min_dwell_time = base + num_of_probes_to_be_sent * delta_per_probe
+	 * The maximum dwell time is calculated according to this:
+	 * max_dwell_time = min_dwell_time + max_dwell_time_delta
+	 */
+	u32 base_dwell_time;
 
-	/* maximum time to wait on the channel for active scans (in TUs) */
-	u16 max_dwell_time_active;
+	/* The delta between the min dwell time and max dwell time for
+	 * active scans (in TU/1000s). The max dwell time is used by the FW once
+	 * traffic is detected on the channel.
+	 */
+	u32 max_dwell_time_delta;
+
+	/* Delta added to min dwell time per each probe in 2.4 GHz (TU/1000) */
+	u32 dwell_time_delta_per_probe;
 
-	/* time to wait on the channel for passive scans (in TUs) */
+	/* Delta added to min dwell time per each probe in 5 GHz (TU/1000) */
+	u32 dwell_time_delta_per_probe_5;
+
+	/* time to wait on the channel for passive scans (in TU/1000) */
 	u32 dwell_time_passive;
 
-	/* time to wait on the channel for DFS scans (in TUs) */
+	/* time to wait on the channel for DFS scans (in TU/1000) */
 	u32 dwell_time_dfs;
 
 	/* number of probe requests to send on each channel in active scans */
@@ -1118,26 +1104,6 @@ struct conf_sched_scan_settings {
 	s8 snr_threshold;
 };
 
-/* these are number of channels on the band divided by two, rounded up */
-#define CONF_TX_PWR_COMPENSATION_LEN_2 7
-#define CONF_TX_PWR_COMPENSATION_LEN_5 18
-
-struct conf_rf_settings {
-	/*
-	 * Per channel power compensation for 2.4GHz
-	 *
-	 * Range: s8
-	 */
-	u8 tx_per_channel_power_compensation_2[CONF_TX_PWR_COMPENSATION_LEN_2];
-
-	/*
-	 * Per channel power compensation for 5GHz
-	 *
-	 * Range: s8
-	 */
-	u8 tx_per_channel_power_compensation_5[CONF_TX_PWR_COMPENSATION_LEN_5];
-};
-
 struct conf_ht_setting {
 	u8 rx_ba_win_size;
 	u8 tx_ba_win_size;
@@ -1286,7 +1252,7 @@ struct conf_hangover_settings {
 	u8 window_size;
 };
 
-struct conf_drv_settings {
+struct wlcore_conf {
 	struct conf_sg_settings sg;
 	struct conf_rx_settings rx;
 	struct conf_tx_settings tx;
@@ -1296,16 +1262,13 @@ struct conf_drv_settings {
 	struct conf_roam_trigger_settings roam_trigger;
 	struct conf_scan_settings scan;
 	struct conf_sched_scan_settings sched_scan;
-	struct conf_rf_settings rf;
 	struct conf_ht_setting ht;
-	struct conf_memory_settings mem_wl127x;
-	struct conf_memory_settings mem_wl128x;
+	struct conf_memory_settings mem;
 	struct conf_fm_coex fm_coex;
 	struct conf_rx_streaming_settings rx_streaming;
 	struct conf_fwlog fwlog;
 	struct conf_rate_policy_settings rate;
 	struct conf_hangover_settings hangover;
-	u8 hci_io_ds;
 };
 
 #endif

drivers/net/wireless/wl12xx/debug.h → drivers/net/wireless/ti/wlcore/debug.h

@@ -52,6 +52,7 @@ enum {
 	DEBUG_ADHOC     = BIT(16),
 	DEBUG_AP	= BIT(17),
 	DEBUG_PROBE	= BIT(18),
+	DEBUG_IO	= BIT(19),
 	DEBUG_MASTER	= (DEBUG_ADHOC | DEBUG_AP),
 	DEBUG_ALL	= ~0,
 };

drivers/net/wireless/wl12xx/debugfs.c → drivers/net/wireless/ti/wlcore/debugfs.c

@@ -26,7 +26,7 @@
 #include <linux/skbuff.h>
 #include <linux/slab.h>
 
-#include "wl12xx.h"
+#include "wlcore.h"
 #include "debug.h"
 #include "acx.h"
 #include "ps.h"
@@ -647,6 +647,7 @@ static ssize_t vifs_state_read(struct file *file, char __user *user_buf,
 		VIF_STATE_PRINT_INT(last_rssi_event);
 		VIF_STATE_PRINT_INT(ba_support);
 		VIF_STATE_PRINT_INT(ba_allowed);
+		VIF_STATE_PRINT_INT(is_gem);
 		VIF_STATE_PRINT_LLHEX(tx_security_seq);
 		VIF_STATE_PRINT_INT(tx_security_last_seq_lsb);
 	}

drivers/net/wireless/wl12xx/debugfs.h → drivers/net/wireless/ti/wlcore/debugfs.h

@@ -24,7 +24,7 @@
 #ifndef __DEBUGFS_H__
 #define __DEBUGFS_H__
 
-#include "wl12xx.h"
+#include "wlcore.h"
 
 int wl1271_debugfs_init(struct wl1271 *wl);
 void wl1271_debugfs_exit(struct wl1271 *wl);

drivers/net/wireless/wl12xx/event.c → drivers/net/wireless/ti/wlcore/event.c

@@ -21,9 +21,8 @@
  *
  */
 
-#include "wl12xx.h"
+#include "wlcore.h"
 #include "debug.h"
-#include "reg.h"
 #include "io.h"
 #include "event.h"
 #include "ps.h"
@@ -98,8 +97,9 @@ static void wl1271_event_mbox_dump(struct event_mailbox *mbox)
 	wl1271_debug(DEBUG_EVENT, "\tmask: 0x%x", mbox->events_mask);
 }
 
-static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox)
+static int wl1271_event_process(struct wl1271 *wl)
 {
+	struct event_mailbox *mbox = wl->mbox;
 	struct ieee80211_vif *vif;
 	struct wl12xx_vif *wlvif;
 	u32 vector;
@@ -196,7 +196,7 @@ static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox)
 			bool success;
 
 			if (!test_and_clear_bit(WLVIF_FLAG_CS_PROGRESS,
-						&wl->flags))
+						&wlvif->flags))
 				continue;
 
 			success = mbox->channel_switch_status ? false : true;
@@ -278,18 +278,8 @@ int wl1271_event_unmask(struct wl1271 *wl)
 	return 0;
 }
 
-void wl1271_event_mbox_config(struct wl1271 *wl)
-{
-	wl->mbox_ptr[0] = wl1271_read32(wl, REG_EVENT_MAILBOX_PTR);
-	wl->mbox_ptr[1] = wl->mbox_ptr[0] + sizeof(struct event_mailbox);
-
-	wl1271_debug(DEBUG_EVENT, "MBOX ptrs: 0x%x 0x%x",
-		     wl->mbox_ptr[0], wl->mbox_ptr[1]);
-}
-
 int wl1271_event_handle(struct wl1271 *wl, u8 mbox_num)
 {
-	struct event_mailbox mbox;
 	int ret;
 
 	wl1271_debug(DEBUG_EVENT, "EVENT on mbox %d", mbox_num);
@@ -298,16 +288,19 @@ int wl1271_event_handle(struct wl1271 *wl, u8 mbox_num)
 		return -EINVAL;
 
 	/* first we read the mbox descriptor */
-	wl1271_read(wl, wl->mbox_ptr[mbox_num], &mbox,
-		    sizeof(struct event_mailbox), false);
+	wl1271_read(wl, wl->mbox_ptr[mbox_num], wl->mbox,
+		    sizeof(*wl->mbox), false);
 
 	/* process the descriptor */
-	ret = wl1271_event_process(wl, &mbox);
+	ret = wl1271_event_process(wl);
 	if (ret < 0)
 		return ret;
 
-	/* then we let the firmware know it can go on...*/
-	wl1271_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_EVENT_ACK);
+	/*
+	 * TODO: we just need this because one bit is in a different
+	 * place.  Is there any better way?
+	 */
+	wl->ops->ack_event(wl);
 
 	return 0;
 }

drivers/net/wireless/wl12xx/event.h → drivers/net/wireless/ti/wlcore/event.h

@@ -132,8 +132,9 @@ struct event_mailbox {
 	u8 reserved_8[9];
 } __packed;
 
+struct wl1271;
+
 int wl1271_event_unmask(struct wl1271 *wl);
-void wl1271_event_mbox_config(struct wl1271 *wl);
 int wl1271_event_handle(struct wl1271 *wl, u8 mbox);
 
 #endif

drivers/net/wireless/ti/wlcore/hw_ops.h

+/*
+ * This file is part of wlcore
+ *
+ * Copyright (C) 2011 Texas Instruments Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WLCORE_HW_OPS_H__
+#define __WLCORE_HW_OPS_H__
+
+#include "wlcore.h"
+#include "rx.h"
+
+static inline u32
+wlcore_hw_calc_tx_blocks(struct wl1271 *wl, u32 len, u32 spare_blks)
+{
+	if (!wl->ops->calc_tx_blocks)
+		BUG_ON(1);
+
+	return wl->ops->calc_tx_blocks(wl, len, spare_blks);
+}
+
+static inline void
+wlcore_hw_set_tx_desc_blocks(struct wl1271 *wl, struct wl1271_tx_hw_descr *desc,
+			     u32 blks, u32 spare_blks)
+{
+	if (!wl->ops->set_tx_desc_blocks)
+		BUG_ON(1);
+
+	return wl->ops->set_tx_desc_blocks(wl, desc, blks, spare_blks);
+}
+
+static inline void
+wlcore_hw_set_tx_desc_data_len(struct wl1271 *wl,
+			       struct wl1271_tx_hw_descr *desc,
+			       struct sk_buff *skb)
+{
+	if (!wl->ops->set_tx_desc_data_len)
+		BUG_ON(1);
+
+	wl->ops->set_tx_desc_data_len(wl, desc, skb);
+}
+
+static inline enum wl_rx_buf_align
+wlcore_hw_get_rx_buf_align(struct wl1271 *wl, u32 rx_desc)
+{
+
+	if (!wl->ops->get_rx_buf_align)
+		BUG_ON(1);
+
+	return wl->ops->get_rx_buf_align(wl, rx_desc);
+}
+
+static inline void
+wlcore_hw_prepare_read(struct wl1271 *wl, u32 rx_desc, u32 len)
+{
+	if (wl->ops->prepare_read)
+		wl->ops->prepare_read(wl, rx_desc, len);
+}
+
+static inline u32
+wlcore_hw_get_rx_packet_len(struct wl1271 *wl, void *rx_data, u32 data_len)
+{
+	if (!wl->ops->get_rx_packet_len)
+		BUG_ON(1);
+
+	return wl->ops->get_rx_packet_len(wl, rx_data, data_len);
+}
+
+static inline void wlcore_hw_tx_delayed_compl(struct wl1271 *wl)
+{
+	if (wl->ops->tx_delayed_compl)
+		wl->ops->tx_delayed_compl(wl);
+}
+
+static inline void wlcore_hw_tx_immediate_compl(struct wl1271 *wl)
+{
+	if (wl->ops->tx_immediate_compl)
+		wl->ops->tx_immediate_compl(wl);
+}
+
+static inline int
+wlcore_hw_init_vif(struct wl1271 *wl, struct wl12xx_vif *wlvif)
+{
+	if (wl->ops->init_vif)
+		return wl->ops->init_vif(wl, wlvif);
+
+	return 0;
+}
+
+static inline u32
+wlcore_hw_sta_get_ap_rate_mask(struct wl1271 *wl, struct wl12xx_vif *wlvif)
+{
+	if (!wl->ops->sta_get_ap_rate_mask)
+		BUG_ON(1);
+
+	return wl->ops->sta_get_ap_rate_mask(wl, wlvif);
+}
+
+static inline int wlcore_identify_fw(struct wl1271 *wl)
+{
+	if (wl->ops->identify_fw)
+		return wl->ops->identify_fw(wl);
+
+	return 0;
+}
+
+#endif

drivers/net/wireless/wl12xx/init.c → drivers/net/wireless/ti/wlcore/init.c

@@ -30,9 +30,9 @@
 #include "wl12xx_80211.h"
 #include "acx.h"
 #include "cmd.h"
-#include "reg.h"
 #include "tx.h"
 #include "io.h"
+#include "hw_ops.h"
 
 int wl1271_init_templates_config(struct wl1271 *wl)
 {
@@ -319,7 +319,7 @@ static int wl12xx_init_fwlog(struct wl1271 *wl)
 {
 	int ret;
 
-	if (wl->quirks & WL12XX_QUIRK_FWLOG_NOT_IMPLEMENTED)
+	if (wl->quirks & WLCORE_QUIRK_FWLOG_NOT_IMPLEMENTED)
 		return 0;
 
 	ret = wl12xx_cmd_config_fwlog(wl);
@@ -494,26 +494,6 @@ static int wl1271_set_ba_policies(struct wl1271 *wl, struct wl12xx_vif *wlvif)
 	return wl12xx_acx_set_ba_initiator_policy(wl, wlvif);
 }
 
-int wl1271_chip_specific_init(struct wl1271 *wl)
-{
-	int ret = 0;
-
-	if (wl->chip.id == CHIP_ID_1283_PG20) {
-		u32 host_cfg_bitmap = HOST_IF_CFG_RX_FIFO_ENABLE;
-
-		if (!(wl->quirks & WL12XX_QUIRK_NO_BLOCKSIZE_ALIGNMENT))
-			/* Enable SDIO padding */
-			host_cfg_bitmap |= HOST_IF_CFG_TX_PAD_TO_SDIO_BLK;
-
-		/* Must be before wl1271_acx_init_mem_config() */
-		ret = wl1271_acx_host_if_cfg_bitmap(wl, host_cfg_bitmap);
-		if (ret < 0)
-			goto out;
-	}
-out:
-	return ret;
-}
-
 /* vif-specifc initialization */
 static int wl12xx_init_sta_role(struct wl1271 *wl, struct wl12xx_vif *wlvif)
 {
@@ -582,10 +562,17 @@ int wl1271_init_vif_specific(struct wl1271 *wl, struct ieee80211_vif *vif)
 			if (ret < 0)
 				return ret;
 		} else if (!wl->sta_count) {
-			/* Configure for ELP power saving */
-			ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_ELP);
-			if (ret < 0)
-				return ret;
+			if (wl->quirks & WLCORE_QUIRK_NO_ELP) {
+				/* Configure for power always on */
+				ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_CAM);
+				if (ret < 0)
+					return ret;
+			} else {
+				/* Configure for ELP power saving */
+				ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_ELP);
+				if (ret < 0)
+					return ret;
+			}
 		}
 	}
 
@@ -652,6 +639,10 @@ int wl1271_init_vif_specific(struct wl1271 *wl, struct ieee80211_vif *vif)
 	if (ret < 0)
 		return ret;
 
+	ret = wlcore_hw_init_vif(wl, wlvif);
+	if (ret < 0)
+		return ret;
+
 	return 0;
 }
 
@@ -659,27 +650,8 @@ int wl1271_hw_init(struct wl1271 *wl)
 {
 	int ret;
 
-	if (wl->chip.id == CHIP_ID_1283_PG20) {
-		ret = wl128x_cmd_general_parms(wl);
-		if (ret < 0)
-			return ret;
-		ret = wl128x_cmd_radio_parms(wl);
-		if (ret < 0)
-			return ret;
-	} else {
-		ret = wl1271_cmd_general_parms(wl);
-		if (ret < 0)
-			return ret;
-		ret = wl1271_cmd_radio_parms(wl);
-		if (ret < 0)
-			return ret;
-		ret = wl1271_cmd_ext_radio_parms(wl);
-		if (ret < 0)
-			return ret;
-	}
-
-	/* Chip-specific init */
-	ret = wl1271_chip_specific_init(wl);
+	/* Chip-specific hw init */
+	ret = wl->ops->hw_init(wl);
 	if (ret < 0)
 		return ret;
 

drivers/net/wireless/wl12xx/init.h → drivers/net/wireless/ti/wlcore/init.h

@@ -24,7 +24,7 @@
 #ifndef __INIT_H__
 #define __INIT_H__
 
-#include "wl12xx.h"
+#include "wlcore.h"
 
 int wl1271_hw_init_power_auth(struct wl1271 *wl);
 int wl1271_init_templates_config(struct wl1271 *wl);

drivers/net/wireless/wl12xx/io.c → drivers/net/wireless/ti/wlcore/io.c

@@ -26,84 +26,12 @@
 #include <linux/spi/spi.h>
 #include <linux/interrupt.h>
 
-#include "wl12xx.h"
+#include "wlcore.h"
 #include "debug.h"
 #include "wl12xx_80211.h"
 #include "io.h"
 #include "tx.h"
 
-#define OCP_CMD_LOOP  32
-
-#define OCP_CMD_WRITE 0x1
-#define OCP_CMD_READ  0x2
-
-#define OCP_READY_MASK  BIT(18)
-#define OCP_STATUS_MASK (BIT(16) | BIT(17))
-
-#define OCP_STATUS_NO_RESP    0x00000
-#define OCP_STATUS_OK         0x10000
-#define OCP_STATUS_REQ_FAILED 0x20000
-#define OCP_STATUS_RESP_ERROR 0x30000
-
-struct wl1271_partition_set wl12xx_part_table[PART_TABLE_LEN] = {
-	[PART_DOWN] = {
-		.mem = {
-			.start = 0x00000000,
-			.size  = 0x000177c0
-		},
-		.reg = {
-			.start = REGISTERS_BASE,
-			.size  = 0x00008800
-		},
-		.mem2 = {
-			.start = 0x00000000,
-			.size  = 0x00000000
-		},
-		.mem3 = {
-			.start = 0x00000000,
-			.size  = 0x00000000
-		},
-	},
-
-	[PART_WORK] = {
-		.mem = {
-			.start = 0x00040000,
-			.size  = 0x00014fc0
-		},
-		.reg = {
-			.start = REGISTERS_BASE,
-			.size  = 0x0000a000
-		},
-		.mem2 = {
-			.start = 0x003004f8,
-			.size  = 0x00000004
-		},
-		.mem3 = {
-			.start = 0x00040404,
-			.size  = 0x00000000
-		},
-	},
-
-	[PART_DRPW] = {
-		.mem = {
-			.start = 0x00040000,
-			.size  = 0x00014fc0
-		},
-		.reg = {
-			.start = DRPW_BASE,
-			.size  = 0x00006000
-		},
-		.mem2 = {
-			.start = 0x00000000,
-			.size  = 0x00000000
-		},
-		.mem3 = {
-			.start = 0x00000000,
-			.size  = 0x00000000
-		}
-	}
-};
-
 bool wl1271_set_block_size(struct wl1271 *wl)
 {
 	if (wl->if_ops->set_block_size) {
@@ -114,17 +42,53 @@ bool wl1271_set_block_size(struct wl1271 *wl)
 	return false;
 }
 
-void wl1271_disable_interrupts(struct wl1271 *wl)
+void wlcore_disable_interrupts(struct wl1271 *wl)
 {
 	disable_irq(wl->irq);
 }
+EXPORT_SYMBOL_GPL(wlcore_disable_interrupts);
 
-void wl1271_enable_interrupts(struct wl1271 *wl)
+void wlcore_enable_interrupts(struct wl1271 *wl)
 {
 	enable_irq(wl->irq);
 }
+EXPORT_SYMBOL_GPL(wlcore_enable_interrupts);
 
-/* Set the SPI partitions to access the chip addresses
+int wlcore_translate_addr(struct wl1271 *wl, int addr)
+{
+	struct wlcore_partition_set *part = &wl->curr_part;
+
+	/*
+	 * To translate, first check to which window of addresses the
+	 * particular address belongs. Then subtract the starting address
+	 * of that window from the address. Then, add offset of the
+	 * translated region.
+	 *
+	 * The translated regions occur next to each other in physical device
+	 * memory, so just add the sizes of the preceding address regions to
+	 * get the offset to the new region.
+	 */
+	if ((addr >= part->mem.start) &&
+	    (addr < part->mem.start + part->mem.size))
+		return addr - part->mem.start;
+	else if ((addr >= part->reg.start) &&
+		 (addr < part->reg.start + part->reg.size))
+		return addr - part->reg.start + part->mem.size;
+	else if ((addr >= part->mem2.start) &&
+		 (addr < part->mem2.start + part->mem2.size))
+		return addr - part->mem2.start + part->mem.size +
+			part->reg.size;
+	else if ((addr >= part->mem3.start) &&
+		 (addr < part->mem3.start + part->mem3.size))
+		return addr - part->mem3.start + part->mem.size +
+			part->reg.size + part->mem2.size;
+
+	WARN(1, "HW address 0x%x out of range", addr);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(wlcore_translate_addr);
+
+/* Set the partitions to access the chip addresses
  *
  * To simplify driver code, a fixed (virtual) memory map is defined for
  * register and memory addresses. Because in the chipset, in different stages
@@ -158,33 +122,43 @@ void wl1271_enable_interrupts(struct wl1271 *wl)
  *                                    |    |
  *
  */
-int wl1271_set_partition(struct wl1271 *wl,
-			 struct wl1271_partition_set *p)
+void wlcore_set_partition(struct wl1271 *wl,
+			  const struct wlcore_partition_set *p)
 {
 	/* copy partition info */
-	memcpy(&wl->part, p, sizeof(*p));
+	memcpy(&wl->curr_part, p, sizeof(*p));
 
-	wl1271_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
+	wl1271_debug(DEBUG_IO, "mem_start %08X mem_size %08X",
 		     p->mem.start, p->mem.size);
-	wl1271_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
+	wl1271_debug(DEBUG_IO, "reg_start %08X reg_size %08X",
 		     p->reg.start, p->reg.size);
-	wl1271_debug(DEBUG_SPI, "mem2_start %08X mem2_size %08X",
+	wl1271_debug(DEBUG_IO, "mem2_start %08X mem2_size %08X",
 		     p->mem2.start, p->mem2.size);
-	wl1271_debug(DEBUG_SPI, "mem3_start %08X mem3_size %08X",
+	wl1271_debug(DEBUG_IO, "mem3_start %08X mem3_size %08X",
 		     p->mem3.start, p->mem3.size);
 
-	/* write partition info to the chipset */
 	wl1271_raw_write32(wl, HW_PART0_START_ADDR, p->mem.start);
 	wl1271_raw_write32(wl, HW_PART0_SIZE_ADDR, p->mem.size);
 	wl1271_raw_write32(wl, HW_PART1_START_ADDR, p->reg.start);
 	wl1271_raw_write32(wl, HW_PART1_SIZE_ADDR, p->reg.size);
 	wl1271_raw_write32(wl, HW_PART2_START_ADDR, p->mem2.start);
 	wl1271_raw_write32(wl, HW_PART2_SIZE_ADDR, p->mem2.size);
+	/*
+	 * We don't need the size of the last partition, as it is
+	 * automatically calculated based on the total memory size and
+	 * the sizes of the previous partitions.
+	 */
 	wl1271_raw_write32(wl, HW_PART3_START_ADDR, p->mem3.start);
+}
+EXPORT_SYMBOL_GPL(wlcore_set_partition);
 
-	return 0;
+void wlcore_select_partition(struct wl1271 *wl, u8 part)
+{
+	wl1271_debug(DEBUG_IO, "setting partition %d", part);
+
+	wlcore_set_partition(wl, &wl->ptable[part]);
 }
-EXPORT_SYMBOL_GPL(wl1271_set_partition);
+EXPORT_SYMBOL_GPL(wlcore_select_partition);
 
 void wl1271_io_reset(struct wl1271 *wl)
 {
@@ -197,48 +171,3 @@ void wl1271_io_init(struct wl1271 *wl)
 	if (wl->if_ops->init)
 		wl->if_ops->init(wl->dev);
 }
-
-void wl1271_top_reg_write(struct wl1271 *wl, int addr, u16 val)
-{
-	/* write address >> 1 + 0x30000 to OCP_POR_CTR */
-	addr = (addr >> 1) + 0x30000;
-	wl1271_write32(wl, OCP_POR_CTR, addr);
-
-	/* write value to OCP_POR_WDATA */
-	wl1271_write32(wl, OCP_DATA_WRITE, val);
-
-	/* write 1 to OCP_CMD */
-	wl1271_write32(wl, OCP_CMD, OCP_CMD_WRITE);
-}
-
-u16 wl1271_top_reg_read(struct wl1271 *wl, int addr)
-{
-	u32 val;
-	int timeout = OCP_CMD_LOOP;
-
-	/* write address >> 1 + 0x30000 to OCP_POR_CTR */
-	addr = (addr >> 1) + 0x30000;
-	wl1271_write32(wl, OCP_POR_CTR, addr);
-
-	/* write 2 to OCP_CMD */
-	wl1271_write32(wl, OCP_CMD, OCP_CMD_READ);
-
-	/* poll for data ready */
-	do {
-		val = wl1271_read32(wl, OCP_DATA_READ);
-	} while (!(val & OCP_READY_MASK) && --timeout);
-
-	if (!timeout) {
-		wl1271_warning("Top register access timed out.");
-		return 0xffff;
-	}
-
-	/* check data status and return if OK */
-	if ((val & OCP_STATUS_MASK) == OCP_STATUS_OK)
-		return val & 0xffff;
-	else {
-		wl1271_warning("Top register access returned error.");
-		return 0xffff;
-	}
-}
-

drivers/net/wireless/wl12xx/io.h → drivers/net/wireless/ti/wlcore/io.h

@@ -26,7 +26,6 @@
 #define __IO_H__
 
 #include <linux/irqreturn.h>
-#include "reg.h"
 
 #define HW_ACCESS_MEMORY_MAX_RANGE	0x1FFC0
 
@@ -43,15 +42,14 @@
 
 #define HW_ACCESS_PRAM_MAX_RANGE	0x3c000
 
-extern struct wl1271_partition_set wl12xx_part_table[PART_TABLE_LEN];
-
 struct wl1271;
 
-void wl1271_disable_interrupts(struct wl1271 *wl);
-void wl1271_enable_interrupts(struct wl1271 *wl);
+void wlcore_disable_interrupts(struct wl1271 *wl);
+void wlcore_enable_interrupts(struct wl1271 *wl);
 
 void wl1271_io_reset(struct wl1271 *wl);
 void wl1271_io_init(struct wl1271 *wl);
+int wlcore_translate_addr(struct wl1271 *wl, int addr);
 
 /* Raw target IO, address is not translated */
 static inline void wl1271_raw_write(struct wl1271 *wl, int addr, void *buf,
@@ -66,6 +64,18 @@ static inline void wl1271_raw_read(struct wl1271 *wl, int addr, void *buf,
 	wl->if_ops->read(wl->dev, addr, buf, len, fixed);
 }
 
+static inline void wlcore_raw_read_data(struct wl1271 *wl, int reg, void *buf,
+					size_t len, bool fixed)
+{
+	wl1271_raw_read(wl, wl->rtable[reg], buf, len, fixed);
+}
+
+static inline void wlcore_raw_write_data(struct wl1271 *wl, int reg, void *buf,
+					 size_t len, bool fixed)
+{
+	wl1271_raw_write(wl, wl->rtable[reg], buf, len, fixed);
+}
+
 static inline u32 wl1271_raw_read32(struct wl1271 *wl, int addr)
 {
 	wl1271_raw_read(wl, addr, &wl->buffer_32,
@@ -81,36 +91,12 @@ static inline void wl1271_raw_write32(struct wl1271 *wl, int addr, u32 val)
 			     sizeof(wl->buffer_32), false);
 }
 
-/* Translated target IO */
-static inline int wl1271_translate_addr(struct wl1271 *wl, int addr)
-{
-	/*
-	 * To translate, first check to which window of addresses the
-	 * particular address belongs. Then subtract the starting address
-	 * of that window from the address. Then, add offset of the
-	 * translated region.
-	 *
-	 * The translated regions occur next to each other in physical device
-	 * memory, so just add the sizes of the preceding address regions to
-	 * get the offset to the new region.
-	 *
-	 * Currently, only the two first regions are addressed, and the
-	 * assumption is that all addresses will fall into either of those
-	 * two.
-	 */
-	if ((addr >= wl->part.reg.start) &&
-	    (addr < wl->part.reg.start + wl->part.reg.size))
-		return addr - wl->part.reg.start + wl->part.mem.size;
-	else
-		return addr - wl->part.mem.start;
-}
-
 static inline void wl1271_read(struct wl1271 *wl, int addr, void *buf,
 			       size_t len, bool fixed)
 {
 	int physical;
 
-	physical = wl1271_translate_addr(wl, addr);
+	physical = wlcore_translate_addr(wl, addr);
 
 	wl1271_raw_read(wl, physical, buf, len, fixed);
 }
@@ -120,11 +106,23 @@ static inline void wl1271_write(struct wl1271 *wl, int addr, void *buf,
 {
 	int physical;
 
-	physical = wl1271_translate_addr(wl, addr);
+	physical = wlcore_translate_addr(wl, addr);
 
 	wl1271_raw_write(wl, physical, buf, len, fixed);
 }
 
+static inline void wlcore_write_data(struct wl1271 *wl, int reg, void *buf,
+				     size_t len, bool fixed)
+{
+	wl1271_write(wl, wl->rtable[reg], buf, len, fixed);
+}
+
+static inline void wlcore_read_data(struct wl1271 *wl, int reg, void *buf,
+				    size_t len, bool fixed)
+{
+	wl1271_read(wl, wl->rtable[reg], buf, len, fixed);
+}
+
 static inline void wl1271_read_hwaddr(struct wl1271 *wl, int hwaddr,
 				      void *buf, size_t len, bool fixed)
 {
@@ -134,19 +132,30 @@ static inline void wl1271_read_hwaddr(struct wl1271 *wl, int hwaddr,
 	/* Addresses are stored internally as addresses to 32 bytes blocks */
 	addr = hwaddr << 5;
 
-	physical = wl1271_translate_addr(wl, addr);
+	physical = wlcore_translate_addr(wl, addr);
 
 	wl1271_raw_read(wl, physical, buf, len, fixed);
 }
 
 static inline u32 wl1271_read32(struct wl1271 *wl, int addr)
 {
-	return wl1271_raw_read32(wl, wl1271_translate_addr(wl, addr));
+	return wl1271_raw_read32(wl, wlcore_translate_addr(wl, addr));
 }
 
 static inline void wl1271_write32(struct wl1271 *wl, int addr, u32 val)
 {
-	wl1271_raw_write32(wl, wl1271_translate_addr(wl, addr), val);
+	wl1271_raw_write32(wl, wlcore_translate_addr(wl, addr), val);
+}
+
+static inline u32 wlcore_read_reg(struct wl1271 *wl, int reg)
+{
+	return wl1271_raw_read32(wl,
+				 wlcore_translate_addr(wl, wl->rtable[reg]));
+}
+
+static inline void wlcore_write_reg(struct wl1271 *wl, int reg, u32 val)
+{
+	wl1271_raw_write32(wl, wlcore_translate_addr(wl, wl->rtable[reg]), val);
 }
 
 static inline void wl1271_power_off(struct wl1271 *wl)
@@ -164,13 +173,8 @@ static inline int wl1271_power_on(struct wl1271 *wl)
 	return ret;
 }
 
-
-/* Top Register IO */
-void wl1271_top_reg_write(struct wl1271 *wl, int addr, u16 val);
-u16 wl1271_top_reg_read(struct wl1271 *wl, int addr);
-
-int wl1271_set_partition(struct wl1271 *wl,
-			 struct wl1271_partition_set *p);
+void wlcore_set_partition(struct wl1271 *wl,
+			  const struct wlcore_partition_set *p);
 
 bool wl1271_set_block_size(struct wl1271 *wl);
 
@@ -178,4 +182,6 @@ bool wl1271_set_block_size(struct wl1271 *wl);
 
 int wl1271_tx_dummy_packet(struct wl1271 *wl);
 
+void wlcore_select_partition(struct wl1271 *wl, u8 part);
+
 #endif

drivers/net/wireless/wl12xx/ps.c → drivers/net/wireless/ti/wlcore/ps.c

@@ -21,7 +21,6 @@
  *
  */
 
-#include "reg.h"
 #include "ps.h"
 #include "io.h"
 #include "tx.h"
@@ -62,7 +61,7 @@ void wl1271_elp_work(struct work_struct *work)
 	}
 
 	wl1271_debug(DEBUG_PSM, "chip to elp");
-	wl1271_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_SLEEP);
+	wl1271_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG, ELPCTRL_SLEEP);
 	set_bit(WL1271_FLAG_IN_ELP, &wl->flags);
 
 out:
@@ -74,6 +73,9 @@ void wl1271_ps_elp_sleep(struct wl1271 *wl)
 {
 	struct wl12xx_vif *wlvif;
 
+	if (wl->quirks & WLCORE_QUIRK_NO_ELP)
+		return;
+
 	/* we shouldn't get consecutive sleep requests */
 	if (WARN_ON(test_and_set_bit(WL1271_FLAG_ELP_REQUESTED, &wl->flags)))
 		return;
@@ -125,7 +127,7 @@ int wl1271_ps_elp_wakeup(struct wl1271 *wl)
 		wl->elp_compl = &compl;
 	spin_unlock_irqrestore(&wl->wl_lock, flags);
 
-	wl1271_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_WAKE_UP);
+	wl1271_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG, ELPCTRL_WAKE_UP);
 
 	if (!pending) {
 		ret = wait_for_completion_timeout(

drivers/net/wireless/wl12xx/ps.h → drivers/net/wireless/ti/wlcore/ps.h

@@ -24,7 +24,7 @@
 #ifndef __PS_H__
 #define __PS_H__
 
-#include "wl12xx.h"
+#include "wlcore.h"
 #include "acx.h"
 
 int wl1271_ps_set_mode(struct wl1271 *wl, struct wl12xx_vif *wlvif,

drivers/net/wireless/wl12xx/rx.c → drivers/net/wireless/ti/wlcore/rx.c

@@ -24,34 +24,36 @@
 #include <linux/gfp.h>
 #include <linux/sched.h>
 
-#include "wl12xx.h"
+#include "wlcore.h"
 #include "debug.h"
 #include "acx.h"
-#include "reg.h"
 #include "rx.h"
 #include "tx.h"
 #include "io.h"
+#include "hw_ops.h"
 
-static u8 wl12xx_rx_get_mem_block(struct wl12xx_fw_status *status,
-				  u32 drv_rx_counter)
-{
-	return le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]) &
-		RX_MEM_BLOCK_MASK;
-}
+/*
+ * TODO: this is here just for now, it must be removed when the data
+ * operations are in place.
+ */
+#include "../wl12xx/reg.h"
 
-static u32 wl12xx_rx_get_buf_size(struct wl12xx_fw_status *status,
-				 u32 drv_rx_counter)
+static u32 wlcore_rx_get_buf_size(struct wl1271 *wl,
+				  u32 rx_pkt_desc)
 {
-	return (le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]) &
-		RX_BUF_SIZE_MASK) >> RX_BUF_SIZE_SHIFT_DIV;
+	if (wl->quirks & WLCORE_QUIRK_RX_BLOCKSIZE_ALIGN)
+		return (rx_pkt_desc & ALIGNED_RX_BUF_SIZE_MASK) >>
+		       ALIGNED_RX_BUF_SIZE_SHIFT;
+
+	return (rx_pkt_desc & RX_BUF_SIZE_MASK) >> RX_BUF_SIZE_SHIFT_DIV;
 }
 
-static bool wl12xx_rx_get_unaligned(struct wl12xx_fw_status *status,
-				    u32 drv_rx_counter)
+static u32 wlcore_rx_get_align_buf_size(struct wl1271 *wl, u32 pkt_len)
 {
-	/* Convert the value to bool */
-	return !!(le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]) &
-		RX_BUF_UNALIGNED_PAYLOAD);
+	if (wl->quirks & WLCORE_QUIRK_RX_BLOCKSIZE_ALIGN)
+		return ALIGN(pkt_len, WL12XX_BUS_BLOCK_SIZE);
+
+	return pkt_len;
 }
 
 static void wl1271_rx_status(struct wl1271 *wl,
@@ -66,10 +68,10 @@ static void wl1271_rx_status(struct wl1271 *wl,
 	else
 		status->band = IEEE80211_BAND_5GHZ;
 
-	status->rate_idx = wl1271_rate_to_idx(desc->rate, status->band);
+	status->rate_idx = wlcore_rate_to_idx(wl, desc->rate, status->band);
 
 	/* 11n support */
-	if (desc->rate <= CONF_HW_RXTX_RATE_MCS0)
+	if (desc->rate <= wl->hw_min_ht_rate)
 		status->flag |= RX_FLAG_HT;
 
 	status->signal = desc->rssi;
@@ -98,7 +100,7 @@ static void wl1271_rx_status(struct wl1271 *wl,
 }
 
 static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length,
-				 bool unaligned, u8 *hlid)
+				 enum wl_rx_buf_align rx_align, u8 *hlid)
 {
 	struct wl1271_rx_descriptor *desc;
 	struct sk_buff *skb;
@@ -106,8 +108,9 @@ static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length,
 	u8 *buf;
 	u8 beacon = 0;
 	u8 is_data = 0;
-	u8 reserved = unaligned ? NET_IP_ALIGN : 0;
+	u8 reserved = 0;
 	u16 seq_num;
+	u32 pkt_data_len;
 
 	/*
 	 * In PLT mode we seem to get frames and mac80211 warns about them,
@@ -116,6 +119,16 @@ static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length,
 	if (unlikely(wl->plt))
 		return -EINVAL;
 
+	pkt_data_len = wlcore_hw_get_rx_packet_len(wl, data, length);
+	if (!pkt_data_len) {
+		wl1271_error("Invalid packet arrived from HW. length %d",
+			     length);
+		return -EINVAL;
+	}
+
+	if (rx_align == WLCORE_RX_BUF_UNALIGNED)
+		reserved = NET_IP_ALIGN;
+
 	/* the data read starts with the descriptor */
 	desc = (struct wl1271_rx_descriptor *) data;
 
@@ -142,8 +155,8 @@ static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length,
 		return -EINVAL;
 	}
 
-	/* skb length not included rx descriptor */
-	skb = __dev_alloc_skb(length + reserved - sizeof(*desc), GFP_KERNEL);
+	/* skb length not including rx descriptor */
+	skb = __dev_alloc_skb(pkt_data_len + reserved, GFP_KERNEL);
 	if (!skb) {
 		wl1271_error("Couldn't allocate RX frame");
 		return -ENOMEM;
@@ -152,7 +165,7 @@ static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length,
 	/* reserve the unaligned payload(if any) */
 	skb_reserve(skb, reserved);
 
-	buf = skb_put(skb, length - sizeof(*desc));
+	buf = skb_put(skb, pkt_data_len);
 
 	/*
 	 * Copy packets from aggregation buffer to the skbs without rx
@@ -160,7 +173,10 @@ static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length,
 	 * packets copy the packets in offset of 2 bytes guarantee IP header
 	 * payload aligned to 4 bytes.
 	 */
-	memcpy(buf, data + sizeof(*desc), length - sizeof(*desc));
+	memcpy(buf, data + sizeof(*desc), pkt_data_len);
+	if (rx_align == WLCORE_RX_BUF_PADDED)
+		skb_pull(skb, NET_IP_ALIGN);
+
 	*hlid = desc->hlid;
 
 	hdr = (struct ieee80211_hdr *)skb->data;
@@ -177,36 +193,35 @@ static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length,
 		     beacon ? "beacon" : "",
 		     seq_num, *hlid);
 
-	skb_trim(skb, skb->len - desc->pad_len);
-
 	skb_queue_tail(&wl->deferred_rx_queue, skb);
 	queue_work(wl->freezable_wq, &wl->netstack_work);
 
 	return is_data;
 }
 
-void wl12xx_rx(struct wl1271 *wl, struct wl12xx_fw_status *status)
+void wl12xx_rx(struct wl1271 *wl, struct wl_fw_status *status)
 {
-	struct wl1271_acx_mem_map *wl_mem_map = wl->target_mem_map;
 	unsigned long active_hlids[BITS_TO_LONGS(WL12XX_MAX_LINKS)] = {0};
 	u32 buf_size;
 	u32 fw_rx_counter  = status->fw_rx_counter & NUM_RX_PKT_DESC_MOD_MASK;
 	u32 drv_rx_counter = wl->rx_counter & NUM_RX_PKT_DESC_MOD_MASK;
 	u32 rx_counter;
-	u32 mem_block;
-	u32 pkt_length;
-	u32 pkt_offset;
+	u32 pkt_len, align_pkt_len;
+	u32 pkt_offset, des;
 	u8 hlid;
-	bool unaligned = false;
+	enum wl_rx_buf_align rx_align;
 
 	while (drv_rx_counter != fw_rx_counter) {
 		buf_size = 0;
 		rx_counter = drv_rx_counter;
 		while (rx_counter != fw_rx_counter) {
-			pkt_length = wl12xx_rx_get_buf_size(status, rx_counter);
-			if (buf_size + pkt_length > WL1271_AGGR_BUFFER_SIZE)
+			des = le32_to_cpu(status->rx_pkt_descs[rx_counter]);
+			pkt_len = wlcore_rx_get_buf_size(wl, des);
+			align_pkt_len = wlcore_rx_get_align_buf_size(wl,
+								     pkt_len);
+			if (buf_size + align_pkt_len > WL1271_AGGR_BUFFER_SIZE)
 				break;
-			buf_size += pkt_length;
+			buf_size += align_pkt_len;
 			rx_counter++;
 			rx_counter &= NUM_RX_PKT_DESC_MOD_MASK;
 		}
@@ -216,38 +231,18 @@ void wl12xx_rx(struct wl1271 *wl, struct wl12xx_fw_status *status)
 			break;
 		}
 
-		if (wl->chip.id != CHIP_ID_1283_PG20) {
-			/*
-			 * Choose the block we want to read
-			 * For aggregated packets, only the first memory block
-			 * should be retrieved. The FW takes care of the rest.
-			 */
-			mem_block = wl12xx_rx_get_mem_block(status,
-							    drv_rx_counter);
-
-			wl->rx_mem_pool_addr.addr = (mem_block << 8) +
-			   le32_to_cpu(wl_mem_map->packet_memory_pool_start);
-
-			wl->rx_mem_pool_addr.addr_extra =
-				wl->rx_mem_pool_addr.addr + 4;
-
-			wl1271_write(wl, WL1271_SLV_REG_DATA,
-				     &wl->rx_mem_pool_addr,
-				     sizeof(wl->rx_mem_pool_addr), false);
-		}
-
 		/* Read all available packets at once */
-		wl1271_read(wl, WL1271_SLV_MEM_DATA, wl->aggr_buf,
-				buf_size, true);
+		des = le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]);
+		wlcore_hw_prepare_read(wl, des, buf_size);
+		wlcore_read_data(wl, REG_SLV_MEM_DATA, wl->aggr_buf,
+				 buf_size, true);
 
 		/* Split data into separate packets */
 		pkt_offset = 0;
 		while (pkt_offset < buf_size) {
-			pkt_length = wl12xx_rx_get_buf_size(status,
-					drv_rx_counter);
-
-			unaligned = wl12xx_rx_get_unaligned(status,
-					drv_rx_counter);
+			des = le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]);
+			pkt_len = wlcore_rx_get_buf_size(wl, des);
+			rx_align = wlcore_hw_get_rx_buf_align(wl, des);
 
 			/*
 			 * the handle data call can only fail in memory-outage
@@ -256,7 +251,7 @@ void wl12xx_rx(struct wl1271 *wl, struct wl12xx_fw_status *status)
 			 */
 			if (wl1271_rx_handle_data(wl,
 						  wl->aggr_buf + pkt_offset,
-						  pkt_length, unaligned,
+						  pkt_len, rx_align,
 						  &hlid) == 1) {
 				if (hlid < WL12XX_MAX_LINKS)
 					__set_bit(hlid, active_hlids);
@@ -269,7 +264,7 @@ void wl12xx_rx(struct wl1271 *wl, struct wl12xx_fw_status *status)
 			wl->rx_counter++;
 			drv_rx_counter++;
 			drv_rx_counter &= NUM_RX_PKT_DESC_MOD_MASK;
-			pkt_offset += pkt_length;
+			pkt_offset += wlcore_rx_get_align_buf_size(wl, pkt_len);
 		}
 	}
 
@@ -277,8 +272,9 @@ void wl12xx_rx(struct wl1271 *wl, struct wl12xx_fw_status *status)
 	 * Write the driver's packet counter to the FW. This is only required
 	 * for older hardware revisions
 	 */
-	if (wl->quirks & WL12XX_QUIRK_END_OF_TRANSACTION)
-		wl1271_write32(wl, RX_DRIVER_COUNTER_ADDRESS, wl->rx_counter);
+	if (wl->quirks & WLCORE_QUIRK_END_OF_TRANSACTION)
+		wl1271_write32(wl, WL12XX_REG_RX_DRIVER_COUNTER,
+			       wl->rx_counter);
 
 	wl12xx_rearm_rx_streaming(wl, active_hlids);
 }