提交 f23a5e14 编写于 作者: L Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM: Fix PM QOS's user mode interface to work with ASCII input
  PM / Hibernate: Update kerneldoc comments in hibernate.c
  PM / Hibernate: Remove arch_prepare_suspend()
  PM / Hibernate: Update some comments in core hibernate code
/* suspend.h: suspension stuff
*
* Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#ifndef _ASM_SUSPEND_H
#define _ASM_SUSPEND_H
static inline int arch_prepare_suspend(void)
{
return 0;
}
#endif /* _ASM_SUSPEND_H */
#ifndef __ASM_SUSPEND_H
#define __ASM_SUSPEND_H
static inline int arch_prepare_suspend(void) { return 0; }
/* References to section boundaries */
extern const void __nosave_begin, __nosave_end;
......
#ifndef __ASM_POWERPC_SUSPEND_H
#define __ASM_POWERPC_SUSPEND_H
static inline int arch_prepare_suspend(void) { return 0; }
#endif /* __ASM_POWERPC_SUSPEND_H */
......@@ -10,7 +10,6 @@
*/
#include <linux/sched.h>
#include <asm/suspend.h>
#include <asm/system.h>
#include <asm/current.h>
#include <asm/mmu_context.h>
......
#ifndef __ASM_S390_SUSPEND_H
#define __ASM_S390_SUSPEND_H
static inline int arch_prepare_suspend(void)
{
return 0;
}
#endif
......@@ -3,7 +3,6 @@
#ifndef __ASSEMBLY__
#include <linux/notifier.h>
static inline int arch_prepare_suspend(void) { return 0; }
#include <asm/ptrace.h>
......
......@@ -14,7 +14,6 @@
#define __UNICORE_SUSPEND_H__
#ifndef __ASSEMBLY__
static inline int arch_prepare_suspend(void) { return 0; }
#include <asm/ptrace.h>
......
......@@ -9,8 +9,6 @@
#include <asm/desc.h>
#include <asm/i387.h>
static inline int arch_prepare_suspend(void) { return 0; }
/* image of the saved processor state */
struct saved_context {
u16 es, fs, gs, ss;
......
......@@ -9,11 +9,6 @@
#include <asm/desc.h>
#include <asm/i387.h>
static inline int arch_prepare_suspend(void)
{
return 0;
}
/*
* Image of the saved processor state, used by the low level ACPI suspend to
* RAM code and by the low level hibernation code.
......
......@@ -40,6 +40,7 @@
#include <linux/string.h>
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/uaccess.h>
......@@ -404,24 +405,36 @@ static ssize_t pm_qos_power_write(struct file *filp, const char __user *buf,
size_t count, loff_t *f_pos)
{
s32 value;
int x;
char ascii_value[11];
struct pm_qos_request_list *pm_qos_req;
if (count == sizeof(s32)) {
if (copy_from_user(&value, buf, sizeof(s32)))
return -EFAULT;
} else if (count == 11) { /* len('0x12345678/0') */
if (copy_from_user(ascii_value, buf, 11))
} else if (count <= 11) { /* ASCII perhaps? */
char ascii_value[11];
unsigned long int ulval;
int ret;
if (copy_from_user(ascii_value, buf, count))
return -EFAULT;
if (strlen(ascii_value) != 10)
return -EINVAL;
x = sscanf(ascii_value, "%x", &value);
if (x != 1)
if (count > 10) {
if (ascii_value[10] == '\n')
ascii_value[10] = '\0';
else
return -EINVAL;
} else {
ascii_value[count] = '\0';
}
ret = strict_strtoul(ascii_value, 16, &ulval);
if (ret) {
pr_debug("%s, 0x%lx, 0x%x\n", ascii_value, ulval, ret);
return -EINVAL;
pr_debug("%s, %d, 0x%x\n", ascii_value, x, value);
} else
}
value = (s32)lower_32_bits(ulval);
} else {
return -EINVAL;
}
pm_qos_req = filp->private_data;
pm_qos_update_request(pm_qos_req, value);
......
......@@ -25,7 +25,6 @@
#include <linux/gfp.h>
#include <linux/syscore_ops.h>
#include <scsi/scsi_scan.h>
#include <asm/suspend.h>
#include "power.h"
......@@ -55,10 +54,9 @@ static int hibernation_mode = HIBERNATION_SHUTDOWN;
static const struct platform_hibernation_ops *hibernation_ops;
/**
* hibernation_set_ops - set the global hibernate operations
* @ops: the hibernation operations to use in subsequent hibernation transitions
* hibernation_set_ops - Set the global hibernate operations.
* @ops: Hibernation operations to use in subsequent hibernation transitions.
*/
void hibernation_set_ops(const struct platform_hibernation_ops *ops)
{
if (ops && !(ops->begin && ops->end && ops->pre_snapshot
......@@ -115,10 +113,9 @@ static int hibernation_test(int level) { return 0; }
#endif /* !CONFIG_PM_DEBUG */
/**
* platform_begin - tell the platform driver that we're starting
* hibernation
* platform_begin - Call platform to start hibernation.
* @platform_mode: Whether or not to use the platform driver.
*/
static int platform_begin(int platform_mode)
{
return (platform_mode && hibernation_ops) ?
......@@ -126,10 +123,9 @@ static int platform_begin(int platform_mode)
}
/**
* platform_end - tell the platform driver that we've entered the
* working state
* platform_end - Call platform to finish transition to the working state.
* @platform_mode: Whether or not to use the platform driver.
*/
static void platform_end(int platform_mode)
{
if (platform_mode && hibernation_ops)
......@@ -137,8 +133,11 @@ static void platform_end(int platform_mode)
}
/**
* platform_pre_snapshot - prepare the machine for hibernation using the
* platform driver if so configured and return an error code if it fails
* platform_pre_snapshot - Call platform to prepare the machine for hibernation.
* @platform_mode: Whether or not to use the platform driver.
*
* Use the platform driver to prepare the system for creating a hibernate image,
* if so configured, and return an error code if that fails.
*/
static int platform_pre_snapshot(int platform_mode)
......@@ -148,10 +147,14 @@ static int platform_pre_snapshot(int platform_mode)
}
/**
* platform_leave - prepare the machine for switching to the normal mode
* of operation using the platform driver (called with interrupts disabled)
* platform_leave - Call platform to prepare a transition to the working state.
* @platform_mode: Whether or not to use the platform driver.
*
* Use the platform driver prepare to prepare the machine for switching to the
* normal mode of operation.
*
* This routine is called on one CPU with interrupts disabled.
*/
static void platform_leave(int platform_mode)
{
if (platform_mode && hibernation_ops)
......@@ -159,10 +162,14 @@ static void platform_leave(int platform_mode)
}
/**
* platform_finish - switch the machine to the normal mode of operation
* using the platform driver (must be called after platform_prepare())
* platform_finish - Call platform to switch the system to the working state.
* @platform_mode: Whether or not to use the platform driver.
*
* Use the platform driver to switch the machine to the normal mode of
* operation.
*
* This routine must be called after platform_prepare().
*/
static void platform_finish(int platform_mode)
{
if (platform_mode && hibernation_ops)
......@@ -170,11 +177,15 @@ static void platform_finish(int platform_mode)
}
/**
* platform_pre_restore - prepare the platform for the restoration from a
* hibernation image. If the restore fails after this function has been
* called, platform_restore_cleanup() must be called.
* platform_pre_restore - Prepare for hibernate image restoration.
* @platform_mode: Whether or not to use the platform driver.
*
* Use the platform driver to prepare the system for resume from a hibernation
* image.
*
* If the restore fails after this function has been called,
* platform_restore_cleanup() must be called.
*/
static int platform_pre_restore(int platform_mode)
{
return (platform_mode && hibernation_ops) ?
......@@ -182,12 +193,16 @@ static int platform_pre_restore(int platform_mode)
}
/**
* platform_restore_cleanup - switch the platform to the normal mode of
* operation after a failing restore. If platform_pre_restore() has been
* called before the failing restore, this function must be called too,
* regardless of the result of platform_pre_restore().
* platform_restore_cleanup - Switch to the working state after failing restore.
* @platform_mode: Whether or not to use the platform driver.
*
* Use the platform driver to switch the system to the normal mode of operation
* after a failing restore.
*
* If platform_pre_restore() has been called before the failing restore, this
* function must be called too, regardless of the result of
* platform_pre_restore().
*/
static void platform_restore_cleanup(int platform_mode)
{
if (platform_mode && hibernation_ops)
......@@ -195,10 +210,9 @@ static void platform_restore_cleanup(int platform_mode)
}
/**
* platform_recover - recover the platform from a failure to suspend
* devices.
* platform_recover - Recover from a failure to suspend devices.
* @platform_mode: Whether or not to use the platform driver.
*/
static void platform_recover(int platform_mode)
{
if (platform_mode && hibernation_ops && hibernation_ops->recover)
......@@ -206,13 +220,12 @@ static void platform_recover(int platform_mode)
}
/**
* swsusp_show_speed - print the time elapsed between two events.
* @start: Starting event.
* @stop: Final event.
* @nr_pages - number of pages processed between @start and @stop
* @msg - introductory message to print
* swsusp_show_speed - Print time elapsed between two events during hibernation.
* @start: Starting event.
* @stop: Final event.
* @nr_pages: Number of memory pages processed between @start and @stop.
* @msg: Additional diagnostic message to print.
*/
void swsusp_show_speed(struct timeval *start, struct timeval *stop,
unsigned nr_pages, char *msg)
{
......@@ -235,25 +248,18 @@ void swsusp_show_speed(struct timeval *start, struct timeval *stop,
}
/**
* create_image - freeze devices that need to be frozen with interrupts
* off, create the hibernation image and thaw those devices. Control
* reappears in this routine after a restore.
* create_image - Create a hibernation image.
* @platform_mode: Whether or not to use the platform driver.
*
* Execute device drivers' .freeze_noirq() callbacks, create a hibernation image
* and execute the drivers' .thaw_noirq() callbacks.
*
* Control reappears in this routine after the subsequent restore.
*/
static int create_image(int platform_mode)
{
int error;
error = arch_prepare_suspend();
if (error)
return error;
/* At this point, dpm_suspend_start() has been called, but *not*
* dpm_suspend_noirq(). We *must* call dpm_suspend_noirq() now.
* Otherwise, drivers for some devices (e.g. interrupt controllers)
* become desynchronized with the actual state of the hardware
* at resume time, and evil weirdness ensues.
*/
error = dpm_suspend_noirq(PMSG_FREEZE);
if (error) {
printk(KERN_ERR "PM: Some devices failed to power down, "
......@@ -297,9 +303,6 @@ static int create_image(int platform_mode)
Power_up:
syscore_resume();
/* NOTE: dpm_resume_noirq() is just a resume() for devices
* that suspended with irqs off ... no overall powerup.
*/
Enable_irqs:
local_irq_enable();
......@@ -317,14 +320,11 @@ static int create_image(int platform_mode)
}
/**
* hibernation_snapshot - quiesce devices and create the hibernation
* snapshot image.
* @platform_mode - if set, use the platform driver, if available, to
* prepare the platform firmware for the power transition.
* hibernation_snapshot - Quiesce devices and create a hibernation image.
* @platform_mode: If set, use platform driver to prepare for the transition.
*
* Must be called with pm_mutex held
* This routine must be called with pm_mutex held.
*/
int hibernation_snapshot(int platform_mode)
{
pm_message_t msg = PMSG_RECOVER;
......@@ -384,13 +384,14 @@ int hibernation_snapshot(int platform_mode)
}
/**
* resume_target_kernel - prepare devices that need to be suspended with
* interrupts off, restore the contents of highmem that have not been
* restored yet from the image and run the low level code that will restore
* the remaining contents of memory and switch to the just restored target
* kernel.
* resume_target_kernel - Restore system state from a hibernation image.
* @platform_mode: Whether or not to use the platform driver.
*
* Execute device drivers' .freeze_noirq() callbacks, restore the contents of
* highmem that have not been restored yet from the image and run the low-level
* code that will restore the remaining contents of memory and switch to the
* just restored target kernel.
*/
static int resume_target_kernel(bool platform_mode)
{
int error;
......@@ -416,24 +417,26 @@ static int resume_target_kernel(bool platform_mode)
if (error)
goto Enable_irqs;
/* We'll ignore saved state, but this gets preempt count (etc) right */
save_processor_state();
error = restore_highmem();
if (!error) {
error = swsusp_arch_resume();
/*
* The code below is only ever reached in case of a failure.
* Otherwise execution continues at place where
* swsusp_arch_suspend() was called
* Otherwise, execution continues at the place where
* swsusp_arch_suspend() was called.
*/
BUG_ON(!error);
/* This call to restore_highmem() undos the previous one */
/*
* This call to restore_highmem() reverts the changes made by
* the previous one.
*/
restore_highmem();
}
/*
* The only reason why swsusp_arch_resume() can fail is memory being
* very tight, so we have to free it as soon as we can to avoid
* subsequent failures
* subsequent failures.
*/
swsusp_free();
restore_processor_state();
......@@ -456,14 +459,12 @@ static int resume_target_kernel(bool platform_mode)
}
/**
* hibernation_restore - quiesce devices and restore the hibernation
* snapshot image. If successful, control returns in hibernation_snaphot()
* @platform_mode - if set, use the platform driver, if available, to
* prepare the platform firmware for the transition.
* hibernation_restore - Quiesce devices and restore from a hibernation image.
* @platform_mode: If set, use platform driver to prepare for the transition.
*
* Must be called with pm_mutex held
* This routine must be called with pm_mutex held. If it is successful, control
* reappears in the restored target kernel in hibernation_snaphot().
*/
int hibernation_restore(int platform_mode)
{
int error;
......@@ -483,10 +484,8 @@ int hibernation_restore(int platform_mode)
}
/**
* hibernation_platform_enter - enter the hibernation state using the
* platform driver (if available)
* hibernation_platform_enter - Power off the system using the platform driver.
*/
int hibernation_platform_enter(void)
{
int error;
......@@ -557,12 +556,12 @@ int hibernation_platform_enter(void)
}
/**
* power_down - Shut the machine down for hibernation.
* power_down - Shut the machine down for hibernation.
*
* Use the platform driver, if configured so; otherwise try
* to power off or reboot.
* Use the platform driver, if configured, to put the system into the sleep
* state corresponding to hibernation, or try to power it off or reboot,
* depending on the value of hibernation_mode.
*/
static void power_down(void)
{
switch (hibernation_mode) {
......@@ -599,9 +598,8 @@ static int prepare_processes(void)
}
/**
* hibernate - The granpappy of the built-in hibernation management
* hibernate - Carry out system hibernation, including saving the image.
*/
int hibernate(void)
{
int error;
......@@ -679,17 +677,20 @@ int hibernate(void)
/**
* software_resume - Resume from a saved image.
* software_resume - Resume from a saved hibernation image.
*
* Called as a late_initcall (so all devices are discovered and
* initialized), we call swsusp to see if we have a saved image or not.
* If so, we quiesce devices, the restore the saved image. We will
* return above (in hibernate() ) if everything goes well.
* Otherwise, we fail gracefully and return to the normally
* scheduled program.
* This routine is called as a late initcall, when all devices have been
* discovered and initialized already.
*
* The image reading code is called to see if there is a hibernation image
* available for reading. If that is the case, devices are quiesced and the
* contents of memory is restored from the saved image.
*
* If this is successful, control reappears in the restored target kernel in
* hibernation_snaphot() which returns to hibernate(). Otherwise, the routine
* attempts to recover gracefully and make the kernel return to the normal mode
* of operation.
*/
static int software_resume(void)
{
int error;
......@@ -819,21 +820,17 @@ static const char * const hibernation_modes[] = {
[HIBERNATION_TESTPROC] = "testproc",
};
/**
* disk - Control hibernation mode
*
* Suspend-to-disk can be handled in several ways. We have a few options
* for putting the system to sleep - using the platform driver (e.g. ACPI
* or other hibernation_ops), powering off the system or rebooting the
* system (for testing) as well as the two test modes.
/*
* /sys/power/disk - Control hibernation mode.
*
* The system can support 'platform', and that is known a priori (and
* encoded by the presence of hibernation_ops). However, the user may
* choose 'shutdown' or 'reboot' as alternatives, as well as one fo the
* test modes, 'test' or 'testproc'.
* Hibernation can be handled in several ways. There are a few different ways
* to put the system into the sleep state: using the platform driver (e.g. ACPI
* or other hibernation_ops), powering it off or rebooting it (for testing
* mostly), or using one of the two available test modes.
*
* show() will display what the mode is currently set to.
* store() will accept one of
* The sysfs file /sys/power/disk provides an interface for selecting the
* hibernation mode to use. Reading from this file causes the available modes
* to be printed. There are 5 modes that can be supported:
*
* 'platform'
* 'shutdown'
......@@ -841,8 +838,14 @@ static const char * const hibernation_modes[] = {
* 'test'
* 'testproc'
*
* It will only change to 'platform' if the system
* supports it (as determined by having hibernation_ops).
* If a platform hibernation driver is in use, 'platform' will be supported
* and will be used by default. Otherwise, 'shutdown' will be used by default.
* The selected option (i.e. the one corresponding to the current value of
* hibernation_mode) is enclosed by a square bracket.
*
* To select a given hibernation mode it is necessary to write the mode's
* string representation (as returned by reading from /sys/power/disk) back
* into /sys/power/disk.
*/
static ssize_t disk_show(struct kobject *kobj, struct kobj_attribute *attr,
......@@ -875,7 +878,6 @@ static ssize_t disk_show(struct kobject *kobj, struct kobj_attribute *attr,
return buf-start;
}
static ssize_t disk_store(struct kobject *kobj, struct kobj_attribute *attr,
const char *buf, size_t n)
{
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册