Merge tag 'for-3.19' of git://git.linaro.org/people/ard.biesheuvel/linux-arm into ard/efi-for-3.19

Pull UEFI updates from Ard Biesheuvel:

  - fixes for compliance with PE/COFF and UEFI specs
  - added support for SMBIOS, including upcoming version 3.0
  - cleanups and diagnostic output improvements
Signed-off-by: NWill Deacon <will.deacon@arm.com>

arch/arm64/Kconfig

@@ -401,6 +401,17 @@ config EFI
 	  allow the kernel to be booted as an EFI application. This
 	  is only useful on systems that have UEFI firmware.
 
+config DMI
+	bool "Enable support for SMBIOS (DMI) tables"
+	depends on EFI
+	default y
+	help
+	  This enables SMBIOS/DMI feature for systems.
+
+	  This option is only useful on systems that have UEFI firmware.
+	  However, even with this option, the resultant kernel should
+	  continue to boot on existing non-UEFI platforms.
+
 endmenu
 
 menu "Userspace binary formats"

arch/arm64/include/asm/dmi.h

+/*
+ * arch/arm64/include/asm/dmi.h
+ *
+ * Copyright (C) 2013 Linaro Limited.
+ * Written by: Yi Li (yi.li@linaro.org)
+ *
+ * based on arch/ia64/include/asm/dmi.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __ASM_DMI_H
+#define __ASM_DMI_H
+
+#include <linux/io.h>
+#include <linux/slab.h>
+
+/*
+ * According to section 2.3.6 of the UEFI spec, the firmware should not
+ * request a virtual mapping for configuration tables such as SMBIOS.
+ * This means we have to map them before use.
+ */
+#define dmi_early_remap(x, l)		ioremap_cache(x, l)
+#define dmi_early_unmap(x, l)		iounmap(x)
+#define dmi_remap(x, l)			ioremap_cache(x, l)
+#define dmi_unmap(x)			iounmap(x)
+#define dmi_alloc(l)			kzalloc(l, GFP_KERNEL)
+
+#endif

arch/arm64/kernel/efi-entry.S

@@ -61,7 +61,8 @@ ENTRY(efi_stub_entry)
 	 */
 	mov	x20, x0		// DTB address
 	ldr	x0, [sp, #16]	// relocated _text address
-	mov	x21, x0
+	ldr	x21, =stext_offset
+	add	x21, x0, x21
 
 	/*
 	 * Flush dcache covering current runtime addresses

arch/arm64/kernel/efi.c

@@ -11,6 +11,7 @@
  *
  */
 
+#include <linux/dmi.h>
 #include <linux/efi.h>
 #include <linux/export.h>
 #include <linux/memblock.h>
@@ -112,8 +113,6 @@ static int __init uefi_init(void)
 		efi.systab->hdr.revision & 0xffff, vendor);
 
 	retval = efi_config_init(NULL);
-	if (retval == 0)
-		set_bit(EFI_CONFIG_TABLES, &efi.flags);
 
 out:
 	early_memunmap(efi.systab,  sizeof(efi_system_table_t));
@@ -125,17 +124,17 @@ static int __init uefi_init(void)
  */
 static __init int is_reserve_region(efi_memory_desc_t *md)
 {
-	if (!is_normal_ram(md))
+	switch (md->type) {
+	case EFI_LOADER_CODE:
+	case EFI_LOADER_DATA:
+	case EFI_BOOT_SERVICES_CODE:
+	case EFI_BOOT_SERVICES_DATA:
+	case EFI_CONVENTIONAL_MEMORY:
 		return 0;
-
-	if (md->attribute & EFI_MEMORY_RUNTIME)
-		return 1;
-
-	if (md->type == EFI_ACPI_RECLAIM_MEMORY ||
-	    md->type == EFI_RESERVED_TYPE)
-		return 1;
-
-	return 0;
+	default:
+		break;
+	}
+	return is_normal_ram(md);
 }
 
 static __init void reserve_regions(void)
@@ -471,3 +470,17 @@ static int __init arm64_enter_virtual_mode(void)
 	return -1;
 }
 early_initcall(arm64_enter_virtual_mode);
+
+static int __init arm64_dmi_init(void)
+{
+	/*
+	 * On arm64, DMI depends on UEFI, and dmi_scan_machine() needs to
+	 * be called early because dmi_id_init(), which is an arch_initcall
+	 * itself, depends on dmi_scan_machine() having been called already.
+	 */
+	dmi_scan_machine();
+	if (dmi_available)
+		dmi_set_dump_stack_arch_desc();
+	return 0;
+}
+core_initcall(arm64_dmi_init);

arch/arm64/kernel/head.S

@@ -132,6 +132,8 @@ efi_head:
 #endif
 
 #ifdef CONFIG_EFI
+	.globl	stext_offset
+	.set	stext_offset, stext - efi_head
 	.align 3
 pe_header:
 	.ascii	"PE"
@@ -155,12 +157,12 @@ optional_header:
 	.long	0				// SizeOfInitializedData
 	.long	0				// SizeOfUninitializedData
 	.long	efi_stub_entry - efi_head	// AddressOfEntryPoint
-	.long	stext - efi_head		// BaseOfCode
+	.long	stext_offset			// BaseOfCode
 
 extra_header_fields:
 	.quad	0				// ImageBase
-	.long	0x20				// SectionAlignment
-	.long	0x8				// FileAlignment
+	.long	0x1000				// SectionAlignment
+	.long	PECOFF_FILE_ALIGNMENT		// FileAlignment
 	.short	0				// MajorOperatingSystemVersion
 	.short	0				// MinorOperatingSystemVersion
 	.short	0				// MajorImageVersion
@@ -172,7 +174,7 @@ extra_header_fields:
 	.long	_end - efi_head			// SizeOfImage
 
 	// Everything before the kernel image is considered part of the header
-	.long	stext - efi_head		// SizeOfHeaders
+	.long	stext_offset			// SizeOfHeaders
 	.long	0				// CheckSum
 	.short	0xa				// Subsystem (EFI application)
 	.short	0				// DllCharacteristics
@@ -217,16 +219,24 @@ section_table:
 	.byte	0
 	.byte	0        		// end of 0 padding of section name
 	.long	_end - stext		// VirtualSize
-	.long	stext - efi_head	// VirtualAddress
+	.long	stext_offset		// VirtualAddress
 	.long	_edata - stext		// SizeOfRawData
-	.long	stext - efi_head	// PointerToRawData
+	.long	stext_offset		// PointerToRawData
 
 	.long	0		// PointerToRelocations (0 for executables)
 	.long	0		// PointerToLineNumbers (0 for executables)
 	.short	0		// NumberOfRelocations  (0 for executables)
 	.short	0		// NumberOfLineNumbers  (0 for executables)
 	.long	0xe0500020	// Characteristics (section flags)
-	.align 5
+
+	/*
+	 * EFI will load stext onwards at the 4k section alignment
+	 * described in the PE/COFF header. To ensure that instruction
+	 * sequences using an adrp and a :lo12: immediate will function
+	 * correctly at this alignment, we must ensure that stext is
+	 * placed at a 4k boundary in the Image to begin with.
+	 */
+	.align 12
 #endif
 
 ENTRY(stext)

arch/arm64/kernel/vmlinux.lds.S

@@ -32,6 +32,22 @@ jiffies = jiffies_64;
 	*(.hyp.text)					\
 	VMLINUX_SYMBOL(__hyp_text_end) = .;
 
+/*
+ * The size of the PE/COFF section that covers the kernel image, which
+ * runs from stext to _edata, must be a round multiple of the PE/COFF
+ * FileAlignment, which we set to its minimum value of 0x200. 'stext'
+ * itself is 4 KB aligned, so padding out _edata to a 0x200 aligned
+ * boundary should be sufficient.
+ */
+PECOFF_FILE_ALIGNMENT = 0x200;
+
+#ifdef CONFIG_EFI
+#define PECOFF_EDATA_PADDING	\
+	.pecoff_edata_padding : { BYTE(0); . = ALIGN(PECOFF_FILE_ALIGNMENT); }
+#else
+#define PECOFF_EDATA_PADDING
+#endif
+
 SECTIONS
 {
 	/*
@@ -103,6 +119,7 @@ SECTIONS
 	_data = .;
 	_sdata = .;
 	RW_DATA_SECTION(64, PAGE_SIZE, THREAD_SIZE)
+	PECOFF_EDATA_PADDING
 	_edata = .;
 
 	BSS_SECTION(0, 0, 0)

drivers/firmware/dmi_scan.c

@@ -92,6 +92,12 @@ static void dmi_table(u8 *buf, int len, int num,
 	while ((i < num) && (data - buf + sizeof(struct dmi_header)) <= len) {
 		const struct dmi_header *dm = (const struct dmi_header *)data;
 
+		/*
+		 * 7.45 End-of-Table (Type 127) [SMBIOS reference spec v3.0.0]
+		 */
+		if (dm->type == DMI_ENTRY_END_OF_TABLE)
+			break;
+
 		/*
 		 *  We want to know the total length (formatted area and
 		 *  strings) before decoding to make sure we won't run off the
@@ -107,7 +113,7 @@ static void dmi_table(u8 *buf, int len, int num,
 	}
 }
 
-static u32 dmi_base;
+static phys_addr_t dmi_base;
 static u16 dmi_len;
 static u16 dmi_num;
 
@@ -467,7 +473,7 @@ static int __init dmi_present(const u8 *buf)
 
 	if (memcmp(buf, "_SM_", 4) == 0 &&
 	    buf[5] < 32 && dmi_checksum(buf, buf[5])) {
-		smbios_ver = (buf[6] << 8) + buf[7];
+		smbios_ver = get_unaligned_be16(buf + 6);
 
 		/* Some BIOS report weird SMBIOS version, fix that up */
 		switch (smbios_ver) {
@@ -489,10 +495,9 @@ static int __init dmi_present(const u8 *buf)
 	buf += 16;
 
 	if (memcmp(buf, "_DMI_", 5) == 0 && dmi_checksum(buf, 15)) {
-		dmi_num = (buf[13] << 8) | buf[12];
-		dmi_len = (buf[7] << 8) | buf[6];
-		dmi_base = (buf[11] << 24) | (buf[10] << 16) |
-			(buf[9] << 8) | buf[8];
+		dmi_num = get_unaligned_le16(buf + 12);
+		dmi_len = get_unaligned_le16(buf + 6);
+		dmi_base = get_unaligned_le32(buf + 8);
 
 		if (dmi_walk_early(dmi_decode) == 0) {
 			if (smbios_ver) {
@@ -514,12 +519,72 @@ static int __init dmi_present(const u8 *buf)
 	return 1;
 }
 
+/*
+ * Check for the SMBIOS 3.0 64-bit entry point signature. Unlike the legacy
+ * 32-bit entry point, there is no embedded DMI header (_DMI_) in here.
+ */
+static int __init dmi_smbios3_present(const u8 *buf)
+{
+	if (memcmp(buf, "_SM3_", 5) == 0 &&
+	    buf[6] < 32 && dmi_checksum(buf, buf[6])) {
+		dmi_ver = get_unaligned_be16(buf + 7);
+		dmi_len = get_unaligned_le32(buf + 12);
+		dmi_base = get_unaligned_le64(buf + 16);
+
+		/*
+		 * The 64-bit SMBIOS 3.0 entry point no longer has a field
+		 * containing the number of structures present in the table.
+		 * Instead, it defines the table size as a maximum size, and
+		 * relies on the end-of-table structure type (#127) to be used
+		 * to signal the end of the table.
+		 * So let's define dmi_num as an upper bound as well: each
+		 * structure has a 4 byte header, so dmi_len / 4 is an upper
+		 * bound for the number of structures in the table.
+		 */
+		dmi_num = dmi_len / 4;
+
+		if (dmi_walk_early(dmi_decode) == 0) {
+			pr_info("SMBIOS %d.%d present.\n",
+				dmi_ver >> 8, dmi_ver & 0xFF);
+			dmi_format_ids(dmi_ids_string, sizeof(dmi_ids_string));
+			pr_debug("DMI: %s\n", dmi_ids_string);
+			return 0;
+		}
+	}
+	return 1;
+}
+
 void __init dmi_scan_machine(void)
 {
 	char __iomem *p, *q;
 	char buf[32];
 
 	if (efi_enabled(EFI_CONFIG_TABLES)) {
+		/*
+		 * According to the DMTF SMBIOS reference spec v3.0.0, it is
+		 * allowed to define both the 64-bit entry point (smbios3) and
+		 * the 32-bit entry point (smbios), in which case they should
+		 * either both point to the same SMBIOS structure table, or the
+		 * table pointed to by the 64-bit entry point should contain a
+		 * superset of the table contents pointed to by the 32-bit entry
+		 * point (section 5.2)
+		 * This implies that the 64-bit entry point should have
+		 * precedence if it is defined and supported by the OS. If we
+		 * have the 64-bit entry point, but fail to decode it, fall
+		 * back to the legacy one (if available)
+		 */
+		if (efi.smbios3 != EFI_INVALID_TABLE_ADDR) {
+			p = dmi_early_remap(efi.smbios3, 32);
+			if (p == NULL)
+				goto error;
+			memcpy_fromio(buf, p, 32);
+			dmi_early_unmap(p, 32);
+
+			if (!dmi_smbios3_present(buf)) {
+				dmi_available = 1;
+				goto out;
+			}
+		}
 		if (efi.smbios == EFI_INVALID_TABLE_ADDR)
 			goto error;
 
@@ -552,7 +617,7 @@ void __init dmi_scan_machine(void)
 		memset(buf, 0, 16);
 		for (q = p; q < p + 0x10000; q += 16) {
 			memcpy_fromio(buf + 16, q, 16);
-			if (!dmi_present(buf)) {
+			if (!dmi_smbios3_present(buf) || !dmi_present(buf)) {
 				dmi_available = 1;
 				dmi_early_unmap(p, 0x10000);
 				goto out;

drivers/firmware/efi/efi.c

@@ -30,6 +30,7 @@ struct efi __read_mostly efi = {
 	.acpi       = EFI_INVALID_TABLE_ADDR,
 	.acpi20     = EFI_INVALID_TABLE_ADDR,
 	.smbios     = EFI_INVALID_TABLE_ADDR,
+	.smbios3    = EFI_INVALID_TABLE_ADDR,
 	.sal_systab = EFI_INVALID_TABLE_ADDR,
 	.boot_info  = EFI_INVALID_TABLE_ADDR,
 	.hcdp       = EFI_INVALID_TABLE_ADDR,
@@ -86,6 +87,8 @@ static ssize_t systab_show(struct kobject *kobj,
 		str += sprintf(str, "ACPI=0x%lx\n", efi.acpi);
 	if (efi.smbios != EFI_INVALID_TABLE_ADDR)
 		str += sprintf(str, "SMBIOS=0x%lx\n", efi.smbios);
+	if (efi.smbios3 != EFI_INVALID_TABLE_ADDR)
+		str += sprintf(str, "SMBIOS3=0x%lx\n", efi.smbios3);
 	if (efi.hcdp != EFI_INVALID_TABLE_ADDR)
 		str += sprintf(str, "HCDP=0x%lx\n", efi.hcdp);
 	if (efi.boot_info != EFI_INVALID_TABLE_ADDR)
@@ -260,6 +263,7 @@ static __initdata efi_config_table_type_t common_tables[] = {
 	{MPS_TABLE_GUID, "MPS", &efi.mps},
 	{SAL_SYSTEM_TABLE_GUID, "SALsystab", &efi.sal_systab},
 	{SMBIOS_TABLE_GUID, "SMBIOS", &efi.smbios},
+	{SMBIOS3_TABLE_GUID, "SMBIOS 3.0", &efi.smbios3},
 	{UGA_IO_PROTOCOL_GUID, "UGA", &efi.uga},
 	{NULL_GUID, NULL, NULL},
 };

drivers/firmware/efi/libstub/arm-stub.c

@@ -247,9 +247,18 @@ unsigned long __init efi_entry(void *handle, efi_system_table_t *sys_table,
 			goto fail_free_cmdline;
 		}
 	}
-	if (!fdt_addr)
+
+	if (fdt_addr) {
+		pr_efi(sys_table, "Using DTB from command line\n");
+	} else {
 		/* Look for a device tree configuration table entry. */
 		fdt_addr = (uintptr_t)get_fdt(sys_table);
+		if (fdt_addr)
+			pr_efi(sys_table, "Using DTB from configuration table\n");
+	}
+
+	if (!fdt_addr)
+		pr_efi(sys_table, "Generating empty DTB\n");
 
 	status = handle_cmdline_files(sys_table, image, cmdline_ptr,
 				      "initrd=", dram_base + SZ_512M,

drivers/xen/efi.c

@@ -294,6 +294,7 @@ static const struct efi efi_xen __initconst = {
 	.acpi                     = EFI_INVALID_TABLE_ADDR,
 	.acpi20                   = EFI_INVALID_TABLE_ADDR,
 	.smbios                   = EFI_INVALID_TABLE_ADDR,
+	.smbios3                  = EFI_INVALID_TABLE_ADDR,
 	.sal_systab               = EFI_INVALID_TABLE_ADDR,
 	.boot_info                = EFI_INVALID_TABLE_ADDR,
 	.hcdp                     = EFI_INVALID_TABLE_ADDR,

include/linux/efi.h

@@ -547,6 +547,9 @@ void efi_native_runtime_setup(void);
 #define SMBIOS_TABLE_GUID    \
     EFI_GUID(  0xeb9d2d31, 0x2d88, 0x11d3, 0x9a, 0x16, 0x0, 0x90, 0x27, 0x3f, 0xc1, 0x4d )
 
+#define SMBIOS3_TABLE_GUID    \
+    EFI_GUID(  0xf2fd1544, 0x9794, 0x4a2c, 0x99, 0x2e, 0xe5, 0xbb, 0xcf, 0x20, 0xe3, 0x94 )
+
 #define SAL_SYSTEM_TABLE_GUID    \
     EFI_GUID(  0xeb9d2d32, 0x2d88, 0x11d3, 0x9a, 0x16, 0x0, 0x90, 0x27, 0x3f, 0xc1, 0x4d )
 
@@ -810,7 +813,8 @@ extern struct efi {
 	unsigned long mps;		/* MPS table */
 	unsigned long acpi;		/* ACPI table  (IA64 ext 0.71) */
 	unsigned long acpi20;		/* ACPI table  (ACPI 2.0) */
-	unsigned long smbios;		/* SM BIOS table */
+	unsigned long smbios;		/* SMBIOS table (32 bit entry point) */
+	unsigned long smbios3;		/* SMBIOS table (64 bit entry point) */
 	unsigned long sal_systab;	/* SAL system table */
 	unsigned long boot_info;	/* boot info table */
 	unsigned long hcdp;		/* HCDP table */