提交 f1fdcbbd 编写于 作者: M Masahiro Yamada 提交者: Wolfram Sang

i2c: uniphier-f: make driver robust against concurrency

This is unlikely to happen, but it is possible for a CPU to enter
the interrupt handler just after wait_for_completion_timeout() has
expired. If this happens, the hardware is accessed from multiple
contexts concurrently.

Disable the IRQ after wait_for_completion_timeout(), and do nothing
from the handler when the IRQ is disabled.

Fixes: 6a62974b ("i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver")
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
上级 a560ae55
......@@ -98,6 +98,7 @@ struct uniphier_fi2c_priv {
unsigned int flags;
unsigned int busy_cnt;
unsigned int clk_cycle;
spinlock_t lock; /* IRQ synchronization */
};
static void uniphier_fi2c_fill_txfifo(struct uniphier_fi2c_priv *priv,
......@@ -162,7 +163,10 @@ static irqreturn_t uniphier_fi2c_interrupt(int irq, void *dev_id)
struct uniphier_fi2c_priv *priv = dev_id;
u32 irq_status;
spin_lock(&priv->lock);
irq_status = readl(priv->membase + UNIPHIER_FI2C_INT);
irq_status &= priv->enabled_irqs;
dev_dbg(&priv->adap.dev,
"interrupt: enabled_irqs=%04x, irq_status=%04x\n",
......@@ -230,6 +234,8 @@ static irqreturn_t uniphier_fi2c_interrupt(int irq, void *dev_id)
goto handled;
}
spin_unlock(&priv->lock);
return IRQ_NONE;
data_done:
......@@ -246,6 +252,8 @@ static irqreturn_t uniphier_fi2c_interrupt(int irq, void *dev_id)
handled:
uniphier_fi2c_clear_irqs(priv);
spin_unlock(&priv->lock);
return IRQ_HANDLED;
}
......@@ -311,7 +319,7 @@ static int uniphier_fi2c_master_xfer_one(struct i2c_adapter *adap,
{
struct uniphier_fi2c_priv *priv = i2c_get_adapdata(adap);
bool is_read = msg->flags & I2C_M_RD;
unsigned long time_left;
unsigned long time_left, flags;
dev_dbg(&adap->dev, "%s: addr=0x%02x, len=%d, stop=%d\n",
is_read ? "receive" : "transmit", msg->addr, msg->len, stop);
......@@ -342,6 +350,12 @@ static int uniphier_fi2c_master_xfer_one(struct i2c_adapter *adap,
priv->membase + UNIPHIER_FI2C_CR);
time_left = wait_for_completion_timeout(&priv->comp, adap->timeout);
spin_lock_irqsave(&priv->lock, flags);
priv->enabled_irqs = 0;
uniphier_fi2c_set_irqs(priv);
spin_unlock_irqrestore(&priv->lock, flags);
if (!time_left) {
dev_err(&adap->dev, "transaction timeout.\n");
uniphier_fi2c_recover(priv);
......@@ -529,6 +543,7 @@ static int uniphier_fi2c_probe(struct platform_device *pdev)
priv->clk_cycle = clk_rate / bus_speed;
init_completion(&priv->comp);
spin_lock_init(&priv->lock);
priv->adap.owner = THIS_MODULE;
priv->adap.algo = &uniphier_fi2c_algo;
priv->adap.dev.parent = dev;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册