提交 f1e68c2e 编写于 作者: F Franky Lin 提交者: John W. Linville

brcmfmac: convert SDIO dpc implementation to workqueue

Switch SDIO dpc implementation from kernel thread to workqueue for
better performance and compatibility.
Reviewed-by: NHante Meuleman <meuleman@broadcom.com>
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NFranky Lin <frankyl@broadcom.com>
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 1d382273
......@@ -495,7 +495,6 @@ struct brcmf_sdio {
u32 hostintmask; /* Copy of Host Interrupt Mask */
u32 intstatus; /* Intstatus bits (events) pending */
bool dpc_sched; /* Indicates DPC schedule (intrpt rcvd) */
bool fcstate; /* State of dongle flow-control */
uint blocksize; /* Block size of SDIO transfers */
......@@ -569,8 +568,8 @@ struct brcmf_sdio {
bool wd_timer_valid;
uint save_ms;
struct task_struct *dpc_tsk;
struct completion dpc_wait;
struct workqueue_struct *brcmf_wq;
struct work_struct datawork;
struct list_head dpc_tsklst;
spinlock_t dpc_tl_lock;
......@@ -2183,12 +2182,6 @@ static void brcmf_sdbrcm_bus_stop(struct device *dev)
bus->watchdog_tsk = NULL;
}
if (bus->dpc_tsk && bus->dpc_tsk != current) {
send_sig(SIGTERM, bus->dpc_tsk, 1);
kthread_stop(bus->dpc_tsk);
bus->dpc_tsk = NULL;
}
down(&bus->sdsem);
/* Enable clock for device interrupts */
......@@ -2261,15 +2254,31 @@ static inline void brcmf_sdbrcm_clrintr(struct brcmf_sdio *bus)
}
#endif /* CONFIG_BRCMFMAC_SDIO_OOB */
static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
static inline void brcmf_sdbrcm_adddpctsk(struct brcmf_sdio *bus)
{
struct list_head *new_hd;
unsigned long flags;
if (in_interrupt())
new_hd = kzalloc(sizeof(struct list_head), GFP_ATOMIC);
else
new_hd = kzalloc(sizeof(struct list_head), GFP_KERNEL);
if (new_hd == NULL)
return;
spin_lock_irqsave(&bus->dpc_tl_lock, flags);
list_add_tail(new_hd, &bus->dpc_tsklst);
spin_unlock_irqrestore(&bus->dpc_tl_lock, flags);
}
static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
{
u32 intstatus, newstatus = 0;
uint rxlimit = bus->rxbound; /* Rx frames to read before resched */
uint txlimit = bus->txbound; /* Tx frames to send before resched */
uint framecnt = 0; /* Temporary counter of tx/rx frames */
bool rxdone = true; /* Flag for no more read data */
bool resched = false; /* Flag indicating resched wanted */
int err;
int err = 0;
brcmf_dbg(TRACE, "Enter\n");
......@@ -2454,7 +2463,6 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
if (ret == 0)
bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQUENCE_WRAP;
brcmf_dbg(INFO, "Return_dpc value is : %d\n", ret);
bus->ctrl_frame_stat = false;
brcmf_sdbrcm_wait_event_wakeup(bus);
}
......@@ -2477,15 +2485,13 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
bus->intstatus = 0;
} else if (bus->clkstate == CLK_PENDING) {
brcmf_dbg(INFO, "rescheduled due to CLK_PENDING awaiting I_CHIPACTIVE interrupt\n");
resched = true;
brcmf_sdbrcm_adddpctsk(bus);
} else if (bus->intstatus || atomic_read(&bus->ipend) > 0 ||
(!bus->fcstate && brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol)
&& data_ok(bus)) || PKT_AVAILABLE()) {
resched = true;
brcmf_sdbrcm_adddpctsk(bus);
}
bus->dpc_sched = resched;
/* If we're done for now, turn off clock request. */
if ((bus->clkstate != CLK_PENDING)
&& bus->idletime == BRCMF_IDLE_IMMEDIATE) {
......@@ -2494,65 +2500,6 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
}
up(&bus->sdsem);
return resched;
}
static inline void brcmf_sdbrcm_adddpctsk(struct brcmf_sdio *bus)
{
struct list_head *new_hd;
unsigned long flags;
if (in_interrupt())
new_hd = kzalloc(sizeof(struct list_head), GFP_ATOMIC);
else
new_hd = kzalloc(sizeof(struct list_head), GFP_KERNEL);
if (new_hd == NULL)
return;
spin_lock_irqsave(&bus->dpc_tl_lock, flags);
list_add_tail(new_hd, &bus->dpc_tsklst);
spin_unlock_irqrestore(&bus->dpc_tl_lock, flags);
}
static int brcmf_sdbrcm_dpc_thread(void *data)
{
struct brcmf_sdio *bus = (struct brcmf_sdio *) data;
struct list_head *cur_hd, *tmp_hd;
unsigned long flags;
allow_signal(SIGTERM);
/* Run until signal received */
while (1) {
if (kthread_should_stop())
break;
if (list_empty(&bus->dpc_tsklst))
if (wait_for_completion_interruptible(&bus->dpc_wait))
break;
spin_lock_irqsave(&bus->dpc_tl_lock, flags);
list_for_each_safe(cur_hd, tmp_hd, &bus->dpc_tsklst) {
spin_unlock_irqrestore(&bus->dpc_tl_lock, flags);
if (bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) {
/* after stopping the bus, exit thread */
brcmf_sdbrcm_bus_stop(bus->sdiodev->dev);
bus->dpc_tsk = NULL;
spin_lock_irqsave(&bus->dpc_tl_lock, flags);
break;
}
if (brcmf_sdbrcm_dpc(bus))
brcmf_sdbrcm_adddpctsk(bus);
spin_lock_irqsave(&bus->dpc_tl_lock, flags);
list_del(cur_hd);
kfree(cur_hd);
}
spin_unlock_irqrestore(&bus->dpc_tl_lock, flags);
}
return 0;
}
static int brcmf_sdbrcm_bus_txdata(struct device *dev, struct sk_buff *pkt)
......@@ -2562,6 +2509,7 @@ static int brcmf_sdbrcm_bus_txdata(struct device *dev, struct sk_buff *pkt)
struct brcmf_bus *bus_if = dev_get_drvdata(dev);
struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
struct brcmf_sdio *bus = sdiodev->bus;
unsigned long flags;
brcmf_dbg(TRACE, "Enter\n");
......@@ -2600,13 +2548,15 @@ static int brcmf_sdbrcm_bus_txdata(struct device *dev, struct sk_buff *pkt)
if (pktq_plen(&bus->txq, prec) > qcount[prec])
qcount[prec] = pktq_plen(&bus->txq, prec);
#endif
/* Schedule DPC if needed to send queued packet(s) */
if (!bus->dpc_sched) {
bus->dpc_sched = true;
if (bus->dpc_tsk) {
brcmf_sdbrcm_adddpctsk(bus);
complete(&bus->dpc_wait);
}
spin_lock_irqsave(&bus->dpc_tl_lock, flags);
if (list_empty(&bus->dpc_tsklst)) {
spin_unlock_irqrestore(&bus->dpc_tl_lock, flags);
brcmf_sdbrcm_adddpctsk(bus);
queue_work(bus->brcmf_wq, &bus->datawork);
} else {
spin_unlock_irqrestore(&bus->dpc_tl_lock, flags);
}
return ret;
......@@ -2802,6 +2752,7 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
struct brcmf_bus *bus_if = dev_get_drvdata(dev);
struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
struct brcmf_sdio *bus = sdiodev->bus;
unsigned long flags;
brcmf_dbg(TRACE, "Enter\n");
......@@ -2885,9 +2836,15 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
} while (ret < 0 && retries++ < TXRETRIES);
}
if ((bus->idletime == BRCMF_IDLE_IMMEDIATE) && !bus->dpc_sched) {
spin_lock_irqsave(&bus->dpc_tl_lock, flags);
if ((bus->idletime == BRCMF_IDLE_IMMEDIATE) &&
list_empty(&bus->dpc_tsklst)) {
spin_unlock_irqrestore(&bus->dpc_tl_lock, flags);
bus->activity = false;
brcmf_sdbrcm_clkctl(bus, CLK_NONE, true);
} else {
spin_unlock_irqrestore(&bus->dpc_tl_lock, flags);
}
up(&bus->sdsem);
......@@ -3698,11 +3655,8 @@ void brcmf_sdbrcm_isr(void *arg)
if (!bus->intr)
brcmf_dbg(ERROR, "isr w/o interrupt configured!\n");
bus->dpc_sched = true;
if (bus->dpc_tsk) {
brcmf_sdbrcm_adddpctsk(bus);
complete(&bus->dpc_wait);
}
brcmf_sdbrcm_adddpctsk(bus);
queue_work(bus->brcmf_wq, &bus->datawork);
}
static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus)
......@@ -3710,6 +3664,7 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus)
#ifdef DEBUG
struct brcmf_bus *bus_if = dev_get_drvdata(bus->sdiodev->dev);
#endif /* DEBUG */
unsigned long flags;
brcmf_dbg(TIMER, "Enter\n");
......@@ -3726,14 +3681,20 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus)
if (!bus->intr ||
(bus->sdcnt.intrcount == bus->sdcnt.lastintrs)) {
if (!bus->dpc_sched) {
spin_lock_irqsave(&bus->dpc_tl_lock, flags);
if (list_empty(&bus->dpc_tsklst)) {
u8 devpend;
spin_unlock_irqrestore(&bus->dpc_tl_lock,
flags);
devpend = brcmf_sdio_regrb(bus->sdiodev,
SDIO_CCCR_INTx,
NULL);
intstatus =
devpend & (INTR_STATUS_FUNC1 |
INTR_STATUS_FUNC2);
} else {
spin_unlock_irqrestore(&bus->dpc_tl_lock,
flags);
}
/* If there is something, make like the ISR and
......@@ -3742,11 +3703,8 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus)
bus->sdcnt.pollcnt++;
atomic_set(&bus->ipend, 1);
bus->dpc_sched = true;
if (bus->dpc_tsk) {
brcmf_sdbrcm_adddpctsk(bus);
complete(&bus->dpc_wait);
}
brcmf_sdbrcm_adddpctsk(bus);
queue_work(bus->brcmf_wq, &bus->datawork);
}
}
......@@ -3800,6 +3758,26 @@ static bool brcmf_sdbrcm_chipmatch(u16 chipid)
return false;
}
static void brcmf_sdio_dataworker(struct work_struct *work)
{
struct brcmf_sdio *bus = container_of(work, struct brcmf_sdio,
datawork);
struct list_head *cur_hd, *tmp_hd;
unsigned long flags;
spin_lock_irqsave(&bus->dpc_tl_lock, flags);
list_for_each_safe(cur_hd, tmp_hd, &bus->dpc_tsklst) {
spin_unlock_irqrestore(&bus->dpc_tl_lock, flags);
brcmf_sdbrcm_dpc(bus);
spin_lock_irqsave(&bus->dpc_tl_lock, flags);
list_del(cur_hd);
kfree(cur_hd);
}
spin_unlock_irqrestore(&bus->dpc_tl_lock, flags);
}
static void brcmf_sdbrcm_release_malloc(struct brcmf_sdio *bus)
{
brcmf_dbg(TRACE, "Enter\n");
......@@ -4012,6 +3990,9 @@ static void brcmf_sdbrcm_release(struct brcmf_sdio *bus)
/* De-register interrupt handler */
brcmf_sdio_intr_unregister(bus->sdiodev);
cancel_work_sync(&bus->datawork);
destroy_workqueue(bus->brcmf_wq);
if (bus->sdiodev->bus_if->drvr) {
brcmf_detach(bus->sdiodev->dev);
brcmf_sdbrcm_release_dongle(bus);
......@@ -4064,6 +4045,13 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev)
init_waitqueue_head(&bus->ctrl_wait);
init_waitqueue_head(&bus->dcmd_resp_wait);
bus->brcmf_wq = create_singlethread_workqueue("brcmf_wq");
if (bus->brcmf_wq == NULL) {
brcmf_dbg(ERROR, "insufficient memory to create txworkqueue\n");
goto fail;
}
INIT_WORK(&bus->datawork, brcmf_sdio_dataworker);
/* Set up the watchdog timer */
init_timer(&bus->timer);
bus->timer.data = (unsigned long)bus;
......@@ -4081,15 +4069,8 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev)
bus->watchdog_tsk = NULL;
}
/* Initialize DPC thread */
init_completion(&bus->dpc_wait);
INIT_LIST_HEAD(&bus->dpc_tsklst);
spin_lock_init(&bus->dpc_tl_lock);
bus->dpc_tsk = kthread_run(brcmf_sdbrcm_dpc_thread,
bus, "brcmf_dpc");
if (IS_ERR(bus->dpc_tsk)) {
pr_warn("brcmf_dpc thread failed to start\n");
bus->dpc_tsk = NULL;
}
/* Assign bus interface call back */
bus->sdiodev->bus_if->brcmf_bus_stop = brcmf_sdbrcm_bus_stop;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册