[BNX2X]: Correct Link management

Properly protect PHY access between two devices on the same board with
a HW lock.

Use GPIO to clear all previous configurations before changing link
parameters.

Shut down the external PHY in case of fan failure.

Reducing the MDC/MDIO clock to 2.5MHz due to problems with some
devices.

Resolve the flow control response according to autoneg with external
PHY.

Unmasking all PHY interrupts in single write to prevent a race in the
interrupts order.

LASI indication fixes to work with peculiarities of PHYs.

Disable MAC RX to avoid a HW bug when closing the MAC under traffic.

Disable parallel detection on HiGig due to HW limitation.

Updating the shared memory structure to work with the current
bootcode.
Signed-off-by: NEliezer Tamir <eliezert@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/bnx2x.h

@@ -24,6 +24,8 @@
 #define BNX2X_MSG_STATS 		0x20000 /* was: NETIF_MSG_TIMER */
 #define NETIF_MSG_NVM   		0x40000 /* was: NETIF_MSG_HW */
 #define NETIF_MSG_DMAE  		0x80000 /* was: NETIF_MSG_HW */
+#define BNX2X_MSG_SP			0x100000 /* was: NETIF_MSG_INTR */
+#define BNX2X_MSG_FP			0x200000 /* was: NETIF_MSG_INTR */
 
 #define DP_LEVEL			KERN_NOTICE     /* was: KERN_DEBUG */
 
@@ -40,6 +42,12 @@
 		__LINE__, bp->dev?(bp->dev->name):"?", ##__args); \
 	} while (0)
 
+/* for logging (never masked) */
+#define BNX2X_LOG(__fmt, __args...) do { \
+	printk(KERN_NOTICE "[%s:%d(%s)]" __fmt, __FUNCTION__, \
+		__LINE__, bp->dev?(bp->dev->name):"?", ##__args); \
+	} while (0)
+
 /* before we have a dev->name use dev_info() */
 #define BNX2X_DEV_INFO(__fmt, __args...) do { \
 	if (bp->msglevel & NETIF_MSG_PROBE) \
@@ -574,7 +582,8 @@ struct bnx2x {
 	u32     		fw_mb;
 
 	u32     		hw_config;
-	u32     		serdes_config;
+	u32			board;
+	u32			serdes_config;
 	u32     		lane_config;
 	u32     		ext_phy_config;
 #define XGXS_EXT_PHY_TYPE(bp)   	(bp->ext_phy_config & \
@@ -595,11 +604,11 @@ struct bnx2x {
 	u8      		tx_lane_swap;
 
 	u8      		link_up;
+	u8			phy_link_up;
 
 	u32     		supported;
 /* link settings - missing defines */
 #define SUPPORTED_2500baseT_Full	(1 << 15)
-#define SUPPORTED_CX4   		(1 << 16)
 
 	u32     		phy_flags;
 /*#define PHY_SERDES_FLAG       		0x1*/
@@ -644,16 +653,9 @@ struct bnx2x {
 #define FLOW_CTRL_BOTH  		PORT_FEATURE_FLOW_CONTROL_BOTH
 #define FLOW_CTRL_NONE  		PORT_FEATURE_FLOW_CONTROL_NONE
 
-	u32     		pause_mode;
-#define PAUSE_NONE      		0
-#define PAUSE_SYMMETRIC 		1
-#define PAUSE_ASYMMETRIC		2
-#define PAUSE_BOTH      		3
-
 	u32     		advertising;
 /* link settings - missing defines */
 #define ADVERTISED_2500baseT_Full       (1 << 15)
-#define ADVERTISED_CX4  		(1 << 16)
 
 	u32     		link_status;
 	u32     		line_speed;
@@ -667,6 +669,8 @@ struct bnx2x {
 #define NVRAM_TIMEOUT_COUNT     	30000
 #define NVRAM_PAGE_SIZE 		256
 
+	u8			wol;
+
 	int     		rx_ring_size;
 
 	u16     		tx_quick_cons_trip_int;
@@ -718,9 +722,6 @@ struct bnx2x {
 #endif
 
 	char    		*name;
-	u16     		bus_speed_mhz;
-	u8      		wol;
-	u8      		pad;
 
 	/* used to synchronize stats collecting */
 	int     		stats_state;
@@ -873,6 +874,7 @@ struct bnx2x {
 #define PCICFG_LINK_SPEED		0xf0000
 #define PCICFG_LINK_SPEED_SHIFT		16
 
+#define BMAC_CONTROL_RX_ENABLE		2
 /* stuff added to make the code fit 80Col */
 
 #define TPA_TYPE_START  		ETH_FAST_PATH_RX_CQE_START_FLG
@@ -944,13 +946,13 @@ struct bnx2x {
 #define LINK_16GTFD     		LINK_STATUS_SPEED_AND_DUPLEX_16GTFD
 #define LINK_16GXFD     		LINK_STATUS_SPEED_AND_DUPLEX_16GXFD
 
-#define NIG_STATUS_INTERRUPT_XGXS0_LINK10G \
+#define NIG_STATUS_XGXS0_LINK10G \
 		NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G
-#define NIG_XGXS0_LINK_STATUS \
+#define NIG_STATUS_XGXS0_LINK_STATUS \
 		NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS
-#define NIG_XGXS0_LINK_STATUS_SIZE \
+#define NIG_STATUS_XGXS0_LINK_STATUS_SIZE \
 		NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE
-#define NIG_SERDES0_LINK_STATUS \
+#define NIG_STATUS_SERDES0_LINK_STATUS \
 		NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS
 #define NIG_MASK_MI_INT \
 		NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT

drivers/net/bnx2x_fw_defs.h

 /* bnx2x_fw_defs.h: Broadcom Everest network driver.
  *
- * Copyright (c) 2007 Broadcom Corporation
+ * Copyright (c) 2007-2008 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by