Input: edt-ft5x06 - do not hardcode interrupt trigger type

Instead of hardcoding IRQ trigger type to IRQF_TRIGGER_FALLING, let's
respect settings specified in device tree. To be compatible with older
DTSes, if trigger type is not set up in DTS we'll set it to default
(falling edge).
Tested-by: NFranklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt

@@ -49,7 +49,7 @@ Example:
 		pinctrl-names = "default";
 		pinctrl-0 = <&edt_ft5x06_pins>;
 		interrupt-parent = <&gpio2>;
-		interrupts = <5 0>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 		reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
 		wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
 	};

drivers/input/touchscreen/edt-ft5x06.c

@@ -27,6 +27,7 @@
 
 #include <linux/module.h>
 #include <linux/ratelimit.h>
+#include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/input.h>
 #include <linux/i2c.h>
@@ -874,6 +875,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 {
 	struct edt_ft5x06_ts_data *tsdata;
 	struct input_dev *input;
+	unsigned long irq_flags;
 	int error;
 	char fw_version[EDT_NAME_LEN];
 
@@ -959,9 +961,13 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 	input_set_drvdata(input, tsdata);
 	i2c_set_clientdata(client, tsdata);
 
-	error = devm_request_threaded_irq(&client->dev, client->irq, NULL,
-					edt_ft5x06_ts_isr,
-					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+	irq_flags = irq_get_trigger_type(client->irq);
+	if (irq_flags == IRQF_TRIGGER_NONE)
+		irq_flags = IRQF_TRIGGER_FALLING;
+	irq_flags |= IRQF_ONESHOT;
+
+	error = devm_request_threaded_irq(&client->dev, client->irq,
+					NULL, edt_ft5x06_ts_isr, irq_flags,
 					client->name, tsdata);
 	if (error) {
 		dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");