提交 f0a60a14 编写于 作者: X Xenia Ragiadakou 提交者: Greg Kroah-Hartman

staging: rtl8192u: remove unnecessary line continuations in r8192U_core.c

This patch fixes the following checkpatch warning:
WARNING: Avoid unnecessary line continuations
Signed-off-by: NXenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: Dan Carpenter<dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
上级 70bdf8a2
......@@ -103,8 +103,7 @@ double __extendsfdf2(float a)
#include "dot11d.h"
//set here to open your trace code. //WB
u32 rt_global_debug_component = \
COMP_DOWN |
u32 rt_global_debug_component = COMP_DOWN |
COMP_SEC |
COMP_ERR; //always open err flags on
......@@ -827,7 +826,7 @@ void rtl8192_set_rxconf(struct net_device *dev)
if (dev->flags & IFF_PROMISC)
DMESG("NIC in promisc mode");
if (priv->ieee80211->iw_mode == IW_MODE_MONITOR || \
if (priv->ieee80211->iw_mode == IW_MODE_MONITOR ||
dev->flags & IFF_PROMISC) {
rxconf = rxconf | RCR_AAP;
} else {
......@@ -879,8 +878,7 @@ void rtl8192_rtx_disable(struct net_device *dev)
struct rtl8192_rx_info *info;
cmd = read_nic_byte(dev, CMDR);
write_nic_byte(dev, CMDR, cmd & \
~(CR_TE|CR_RE));
write_nic_byte(dev, CMDR, cmd & ~(CR_TE|CR_RE));
force_pci_posting(dev);
mdelay(10);
......@@ -1170,7 +1168,7 @@ struct sk_buff *DrvAggr_Aggregation(struct net_device *dev, struct ieee80211_drv
tx_fwinfo->RtsRate = MRateToHwRate8190Pci((u8)tcb_desc->rts_rate);
tx_fwinfo->RtsSubcarrier = (tx_fwinfo->RtsHT == 0)?(tcb_desc->RTSSC):0;
tx_fwinfo->RtsBandwidth = (tx_fwinfo->RtsHT == 1)?((tcb_desc->bRTSBW)?1:0):0;
tx_fwinfo->RtsShort = (tx_fwinfo->RtsHT == 0)?(tcb_desc->bRTSUseShortPreamble?1:0):\
tx_fwinfo->RtsShort = (tx_fwinfo->RtsHT == 0)?(tcb_desc->bRTSUseShortPreamble?1:0):
(tcb_desc->bRTSUseShortGI?1:0);
/* Set Bandwidth and sub-channel settings. */
......@@ -1313,7 +1311,7 @@ static void rtl8192_tx_isr(struct urb *tx_urb)
/* Handle MPDU in wait queue. */
if (queue_index != BEACON_QUEUE) {
/* Don't send data frame during scanning.*/
if ((skb_queue_len(&priv->ieee80211->skb_waitQ[queue_index]) != 0)&&\
if ((skb_queue_len(&priv->ieee80211->skb_waitQ[queue_index]) != 0)&&
(!(priv->ieee80211->queue_stop))) {
if (NULL != (skb = skb_dequeue(&(priv->ieee80211->skb_waitQ[queue_index]))))
priv->ieee80211->softmac_hard_start_xmit(skb, dev);
......@@ -1321,7 +1319,7 @@ static void rtl8192_tx_isr(struct urb *tx_urb)
return; //modified by david to avoid further processing AMSDU
}
#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
else if ((skb_queue_len(&priv->ieee80211->skb_drv_aggQ[queue_index]) != 0)&&\
else if ((skb_queue_len(&priv->ieee80211->skb_drv_aggQ[queue_index]) != 0)&&
(!(priv->ieee80211->queue_stop))) {
// Tx Driver Aggregation process
/* The driver will aggregation the packets according to the following stats
......@@ -1613,7 +1611,7 @@ short rtl819xU_tx_cmd(struct net_device *dev, struct sk_buff *skb)
printk("%8x ", tx[i]);
printk("\n");
#endif
usb_fill_bulk_urb(tx_urb, priv->udev, usb_sndbulkpipe(priv->udev, idx_pipe), \
usb_fill_bulk_urb(tx_urb, priv->udev, usb_sndbulkpipe(priv->udev, idx_pipe),
skb->data, skb->len, rtl8192_tx_isr, skb);
status = usb_submit_urb(tx_urb, GFP_ATOMIC);
......@@ -1798,7 +1796,7 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb)
tx_fwinfo->RtsRate = MRateToHwRate8190Pci((u8)tcb_desc->rts_rate);
tx_fwinfo->RtsSubcarrier = (tx_fwinfo->RtsHT == 0)?(tcb_desc->RTSSC):0;
tx_fwinfo->RtsBandwidth = (tx_fwinfo->RtsHT == 1)?((tcb_desc->bRTSBW)?1:0):0;
tx_fwinfo->RtsShort = (tx_fwinfo->RtsHT == 0)?(tcb_desc->bRTSUseShortPreamble?1:0):\
tx_fwinfo->RtsShort = (tx_fwinfo->RtsHT == 0)?(tcb_desc->bRTSUseShortPreamble?1:0):
(tcb_desc->bRTSUseShortGI?1:0);
/* Set Bandwidth and sub-channel settings. */
......@@ -2156,7 +2154,7 @@ static int rtl8192_qos_handle_probe_response(struct r8192_priv *priv,
"qos_activate\n");
}
} else {
memcpy(&priv->ieee80211->current_network.qos_data.parameters,\
memcpy(&priv->ieee80211->current_network.qos_data.parameters,
&def_qos_parameters, size);
if ((network->qos_data.active == 1) && (active_network == 1)) {
......@@ -2207,18 +2205,18 @@ static int rtl8192_qos_association_resp(struct r8192_priv *priv,
spin_lock_irqsave(&priv->ieee80211->lock, flags);
if (network->flags & NETWORK_HAS_QOS_PARAMETERS) {
memcpy(&priv->ieee80211->current_network.qos_data.parameters,\
&network->qos_data.parameters,\
memcpy(&priv->ieee80211->current_network.qos_data.parameters,
&network->qos_data.parameters,
sizeof(struct ieee80211_qos_parameters));
priv->ieee80211->current_network.qos_data.active = 1;
set_qos_param = 1;
/* update qos parameter for current network */
priv->ieee80211->current_network.qos_data.old_param_count = \
priv->ieee80211->current_network.qos_data.old_param_count =
priv->ieee80211->current_network.qos_data.param_count;
priv->ieee80211->current_network.qos_data.param_count = \
priv->ieee80211->current_network.qos_data.param_count =
network->qos_data.param_count;
} else {
memcpy(&priv->ieee80211->current_network.qos_data.parameters,\
memcpy(&priv->ieee80211->current_network.qos_data.parameters,
&def_qos_parameters, size);
priv->ieee80211->current_network.qos_data.active = 0;
priv->ieee80211->current_network.qos_data.supported = 0;
......@@ -2913,7 +2911,7 @@ void rtl8192_hwconfig(struct net_device *dev)
// Set Retry Limit here
//
write_nic_word(dev, RETRY_LIMIT,
priv->ShortRetryLimit << RETRY_LIMIT_SHORT_SHIFT | \
priv->ShortRetryLimit << RETRY_LIMIT_SHORT_SHIFT |
priv->LongRetryLimit << RETRY_LIMIT_LONG_SHIFT);
// Set Contention Window here
......@@ -2992,13 +2990,13 @@ bool rtl8192_adapter_start(struct net_device *dev)
write_nic_dword(dev, RCR, priv->ReceiveConfig);
//Initialize Number of Reserved Pages in Firmware Queue
write_nic_dword(dev, RQPN1, NUM_OF_PAGE_IN_FW_QUEUE_BK << RSVD_FW_QUEUE_PAGE_BK_SHIFT |\
NUM_OF_PAGE_IN_FW_QUEUE_BE << RSVD_FW_QUEUE_PAGE_BE_SHIFT | \
NUM_OF_PAGE_IN_FW_QUEUE_VI << RSVD_FW_QUEUE_PAGE_VI_SHIFT | \
write_nic_dword(dev, RQPN1, NUM_OF_PAGE_IN_FW_QUEUE_BK << RSVD_FW_QUEUE_PAGE_BK_SHIFT |
NUM_OF_PAGE_IN_FW_QUEUE_BE << RSVD_FW_QUEUE_PAGE_BE_SHIFT |
NUM_OF_PAGE_IN_FW_QUEUE_VI << RSVD_FW_QUEUE_PAGE_VI_SHIFT |
NUM_OF_PAGE_IN_FW_QUEUE_VO <<RSVD_FW_QUEUE_PAGE_VO_SHIFT);
write_nic_dword(dev, RQPN2, NUM_OF_PAGE_IN_FW_QUEUE_MGNT << RSVD_FW_QUEUE_PAGE_MGNT_SHIFT |\
write_nic_dword(dev, RQPN2, NUM_OF_PAGE_IN_FW_QUEUE_MGNT << RSVD_FW_QUEUE_PAGE_MGNT_SHIFT |
NUM_OF_PAGE_IN_FW_QUEUE_CMD << RSVD_FW_QUEUE_PAGE_CMD_SHIFT);
write_nic_dword(dev, RQPN3, APPLIED_RESERVED_QUEUE_IN_FW| \
write_nic_dword(dev, RQPN3, APPLIED_RESERVED_QUEUE_IN_FW|
NUM_OF_PAGE_IN_FW_QUEUE_BCN<<RSVD_FW_QUEUE_PAGE_BCN_SHIFT
);
write_nic_dword(dev, RATR0+4*7, (RATE_ALL_OFDM_AG | RATE_ALL_CCK));
......@@ -4683,7 +4681,7 @@ void query_rxdesc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats,
// TODO: Need to verify it on FGPA platform
//Driver info are written to the RxBuffer following rx desc
if (stats->RxDrvInfoSize != 0) {
driver_info = (rx_drvinfo_819x_usb *)(skb->data + sizeof(rx_desc_819x_usb) + \
driver_info = (rx_drvinfo_819x_usb *)(skb->data + sizeof(rx_desc_819x_usb) +
stats->RxBufShift);
/* unit: 0.5M */
/* TODO */
......@@ -5013,14 +5011,14 @@ void rtl8192_irq_rx_tasklet(struct r8192_priv *priv)
/* Command packet pipe */
case 9:
RT_TRACE(COMP_RECV, "command in-pipe index(%d)\n",\
RT_TRACE(COMP_RECV, "command in-pipe index(%d)\n",
info->out_pipe);
rtl8192_rx_cmd(skb);
break;
default: /* should never get here! */
RT_TRACE(COMP_ERR, "Unknown in-pipe index(%d)\n",\
RT_TRACE(COMP_ERR, "Unknown in-pipe index(%d)\n",
info->out_pipe);
dev_kfree_skb(skb);
break;
......@@ -5253,7 +5251,7 @@ void EnableHWSecurityConfig8192(struct net_device *dev)
ieee->hwsec_active = 0;
SECR_value &= ~SCR_RxDecEnable;
}
RT_TRACE(COMP_SEC, "%s:, hwsec:%d, pairwise_key:%d, SECR_value:%x\n", __func__, \
RT_TRACE(COMP_SEC, "%s:, hwsec:%d, pairwise_key:%d, SECR_value:%x\n", __func__,
ieee->hwsec_active, ieee->pairwise_key_type, SECR_value);
write_nic_byte(dev, SECR, SECR_value);
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册