提交 f09678af 编写于 作者: S Sergei Shtylylov 提交者: Ralf Baechle

[MIPS] TX49x7: Fix reporting of the CPU name and PCI clock

    
I've noticed that PCI clock was incorrectly reported as 66 MHz while being
mere 33 MHz on RBTX4937 board -- this was due to the different encoding of
the PCI divisor field in CCFG register between TX4927 and TX4937 chips...
    
Also, RBTX49x7 was printed out as a CPU name (e.g., "CPU is RBTX4937");
and some debug printk() were duplicating each other...
Signed-off-by: NKonstantin Baydarov <kbaidarov@ru.mvista.com>
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
上级 c226f260
......@@ -60,7 +60,6 @@ void __init prom_init_cmdline(void)
void __init prom_init(void)
{
const char* toshiba_name_list[] = GROUP_TOSHIBA_NAMES;
extern int tx4927_get_mem_size(void);
extern char* toshiba_name;
int msize;
......@@ -69,12 +68,13 @@ void __init prom_init(void)
mips_machgroup = MACH_GROUP_TOSHIBA;
if ((read_c0_prid() & 0xff) == PRID_REV_TX4927)
if ((read_c0_prid() & 0xff) == PRID_REV_TX4927) {
mips_machtype = MACH_TOSHIBA_RBTX4927;
else
toshiba_name = "TX4927";
} else {
mips_machtype = MACH_TOSHIBA_RBTX4937;
toshiba_name = toshiba_name_list[mips_machtype];
toshiba_name = "TX4937";
}
msize = tx4927_get_mem_size();
add_memory_region(0, msize << 20, BOOT_MEM_RAM);
......
......@@ -539,19 +539,10 @@ void tx4927_pci_setup(void)
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
"0x%08lx=mips_io_port_base",
mips_io_port_base);
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
"setup pci_io_resource to 0x%08lx 0x%08lx\n",
pci_io_resource.start,
pci_io_resource.end);
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
"setup pci_mem_resource to 0x%08lx 0x%08lx\n",
pci_mem_resource.start,
pci_mem_resource.end);
if (!called) {
printk
("TX4927 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n",
("%s PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n",
toshiba_name,
(unsigned short) (tx4927_pcicptr->pciid >> 16),
(unsigned short) (tx4927_pcicptr->pciid & 0xffff),
(unsigned short) (tx4927_pcicptr->pciccrev & 0xff),
......@@ -564,21 +555,52 @@ void tx4927_pci_setup(void)
(tx4927_ccfgptr->ccfg & TX4927_CCFG_PCI66) ? " PCI66" : "");
if (tx4927_ccfgptr->pcfg & TX4927_PCFG_PCICLKEN_ALL) {
int pciclk = 0;
switch ((unsigned long) tx4927_ccfgptr->
ccfg & TX4927_CCFG_PCIDIVMODE_MASK) {
case TX4927_CCFG_PCIDIVMODE_2_5:
pciclk = tx4927_cpu_clock * 2 / 5;
break;
case TX4927_CCFG_PCIDIVMODE_3:
pciclk = tx4927_cpu_clock / 3;
break;
case TX4927_CCFG_PCIDIVMODE_5:
pciclk = tx4927_cpu_clock / 5;
break;
case TX4927_CCFG_PCIDIVMODE_6:
pciclk = tx4927_cpu_clock / 6;
break;
}
if (mips_machtype == MACH_TOSHIBA_RBTX4937)
switch ((unsigned long) tx4927_ccfgptr->
ccfg & TX4937_CCFG_PCIDIVMODE_MASK) {
case TX4937_CCFG_PCIDIVMODE_4:
pciclk = tx4927_cpu_clock / 4;
break;
case TX4937_CCFG_PCIDIVMODE_4_5:
pciclk = tx4927_cpu_clock * 2 / 9;
break;
case TX4937_CCFG_PCIDIVMODE_5:
pciclk = tx4927_cpu_clock / 5;
break;
case TX4937_CCFG_PCIDIVMODE_5_5:
pciclk = tx4927_cpu_clock * 2 / 11;
break;
case TX4937_CCFG_PCIDIVMODE_8:
pciclk = tx4927_cpu_clock / 8;
break;
case TX4937_CCFG_PCIDIVMODE_9:
pciclk = tx4927_cpu_clock / 9;
break;
case TX4937_CCFG_PCIDIVMODE_10:
pciclk = tx4927_cpu_clock / 10;
break;
case TX4937_CCFG_PCIDIVMODE_11:
pciclk = tx4927_cpu_clock / 11;
break;
}
else
switch ((unsigned long) tx4927_ccfgptr->
ccfg & TX4927_CCFG_PCIDIVMODE_MASK) {
case TX4927_CCFG_PCIDIVMODE_2_5:
pciclk = tx4927_cpu_clock * 2 / 5;
break;
case TX4927_CCFG_PCIDIVMODE_3:
pciclk = tx4927_cpu_clock / 3;
break;
case TX4927_CCFG_PCIDIVMODE_5:
pciclk = tx4927_cpu_clock / 5;
break;
case TX4927_CCFG_PCIDIVMODE_6:
pciclk = tx4927_cpu_clock / 6;
break;
}
printk("Internal(%dMHz)", pciclk / 1000000);
} else {
int pciclk = 0;
......@@ -823,17 +845,33 @@ void __init toshiba_rbtx4927_setup(void)
/* PCIC */
/*
* ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz.
* PCIDIVMODE[12:11]'s initial value are given by S9[4:3] (ON:0, OFF:1).
*
* For TX4927:
* PCIDIVMODE[12:11]'s initial value is given by S9[4:3] (ON:0, OFF:1).
* CPU 166MHz: PCI 66MHz : PCIDIVMODE: 00 (1/2.5)
* CPU 200MHz: PCI 66MHz : PCIDIVMODE: 01 (1/3)
* CPU 166MHz: PCI 33MHz : PCIDIVMODE: 10 (1/5)
* CPU 200MHz: PCI 33MHz : PCIDIVMODE: 11 (1/6)
* i.e. S9[3]: ON (83MHz), OFF (100MHz)
*
* For TX4937:
* PCIDIVMODE[12:11]'s initial value is given by S1[5:4] (ON:0, OFF:1)
* PCIDIVMODE[10] is 0.
* CPU 266MHz: PCI 33MHz : PCIDIVMODE: 000 (1/8)
* CPU 266MHz: PCI 66MHz : PCIDIVMODE: 001 (1/4)
* CPU 300MHz: PCI 33MHz : PCIDIVMODE: 010 (1/9)
* CPU 300MHz: PCI 66MHz : PCIDIVMODE: 011 (1/4.5)
* CPU 333MHz: PCI 33MHz : PCIDIVMODE: 100 (1/10)
* CPU 333MHz: PCI 66MHz : PCIDIVMODE: 101 (1/5)
*
*/
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI1,
"ccfg is %lx, DIV is %x\n",
(unsigned long) tx4927_ccfgptr->
ccfg, TX4927_CCFG_PCIDIVMODE_MASK);
"ccfg is %lx, PCIDIVMODE is %x\n",
(unsigned long) tx4927_ccfgptr->ccfg,
(unsigned long) tx4927_ccfgptr->ccfg &
(mips_machtype == MACH_TOSHIBA_RBTX4937 ?
TX4937_CCFG_PCIDIVMODE_MASK :
TX4927_CCFG_PCIDIVMODE_MASK));
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI1,
"PCI66 mode is %lx, PCI mode is %lx, pci arb is %lx\n",
......@@ -844,20 +882,30 @@ void __init toshiba_rbtx4927_setup(void)
(unsigned long) tx4927_ccfgptr->
ccfg & TX4927_CCFG_PCIXARB);
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI1,
"PCIDIVMODE is %lx\n",
(unsigned long) tx4927_ccfgptr->
ccfg & TX4927_CCFG_PCIDIVMODE_MASK);
switch ((unsigned long) tx4927_ccfgptr->
ccfg & TX4927_CCFG_PCIDIVMODE_MASK) {
case TX4927_CCFG_PCIDIVMODE_2_5:
case TX4927_CCFG_PCIDIVMODE_5:
tx4927_cpu_clock = 166000000; /* 166MHz */
break;
default:
tx4927_cpu_clock = 200000000; /* 200MHz */
}
if (mips_machtype == MACH_TOSHIBA_RBTX4937)
switch ((unsigned long)tx4927_ccfgptr->
ccfg & TX4937_CCFG_PCIDIVMODE_MASK) {
case TX4937_CCFG_PCIDIVMODE_8:
case TX4937_CCFG_PCIDIVMODE_4:
tx4927_cpu_clock = 266666666; /* 266MHz */
break;
case TX4937_CCFG_PCIDIVMODE_9:
case TX4937_CCFG_PCIDIVMODE_4_5:
tx4927_cpu_clock = 300000000; /* 300MHz */
break;
default:
tx4927_cpu_clock = 333333333; /* 333MHz */
}
else
switch ((unsigned long)tx4927_ccfgptr->
ccfg & TX4927_CCFG_PCIDIVMODE_MASK) {
case TX4927_CCFG_PCIDIVMODE_2_5:
case TX4927_CCFG_PCIDIVMODE_5:
tx4927_cpu_clock = 166666666; /* 166MHz */
break;
default:
tx4927_cpu_clock = 200000000; /* 200MHz */
}
/* CCFG */
/* enable Timeout BusError */
......
......@@ -253,6 +253,16 @@ struct tx4927_pcic_reg {
#define TX4927_CCFG_PCIDIVMODE_5 0x00001000
#define TX4927_CCFG_PCIDIVMODE_6 0x00001800
#define TX4937_CCFG_PCIDIVMODE_MASK 0x00001c00
#define TX4937_CCFG_PCIDIVMODE_8 0x00000000
#define TX4937_CCFG_PCIDIVMODE_4 0x00000400
#define TX4937_CCFG_PCIDIVMODE_9 0x00000800
#define TX4937_CCFG_PCIDIVMODE_4_5 0x00000c00
#define TX4937_CCFG_PCIDIVMODE_10 0x00001000
#define TX4937_CCFG_PCIDIVMODE_5 0x00001400
#define TX4937_CCFG_PCIDIVMODE_11 0x00001800
#define TX4937_CCFG_PCIDIVMODE_5_5 0x00001c00
/* PCFG : Pin Configuration */
#define TX4927_PCFG_PCICLKEN_ALL 0x003f0000
#define TX4927_PCFG_PCICLKEN(ch) (0x00010000<<(ch))
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册