Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 effbc4fd 编写于 作者: D Dave Airlie
浏览文件
操作

Merge branch 'drm-intel-next' of git://people.freedesktop.org/~danvet/drm-intel into drm-core-next 

Daniel Vetter wrote
First pull request for 3.5-next, slightly large than usual because new
things kept coming in since the last pull for 3.4.
Highlights:
- first batch of hw enablement for vlv (Jesse et al) and hsw (Eugeni). pci
 ids are not yet added, and there's still quite a few patches to merge
 (mostly modesetting). To make QA easier I've decided to merge this stuff
 in pieces.
- loads of cleanups and prep patches spurred by the above. Especially vlv
 is a real frankenstein chip, but also hsw is stretching our driver's
 code design. Expect more to come in this area for 3.5.
- more gmbus fixes, cleanups and improvements by Daniel Kurtz. Again,
 there are more patches needed (and some already queued up), but I wanted
 to split this a bit for better testing.
- pwrite/pread rework and retuning. This series has been in the works for
 a few months already and a lot of i-g-t tests have been created for it.
 Now it's finally ready to be merged.  Note that one patch in this series
 touches include/pagemap.h, that patch is acked-by akpm.
- reduce mappable pressure and relocation throughput improvements from
 Chris.
- mmap offset exhaustion mitigation by Chris Wilson.
- a start at figuring out which codepaths in our messy dri1/ums+gem/kms
 driver we actually need to support by bailing out of unsupported case.
 The driver now refuses to load without kms on gen6+ and disallows a few
 ioctls that userspace never used in certain cases. More of this will
 definitely come.
- More decoupling of global gtt and ppgtt.
- Improved dual-link lvds detection by Takashi Iwai.
- Shut up the compiler + plus fix the fallout (Ben)
- Inverted panel brightness handling (mostly Acer manages to break things
 in this way).
- Small fixlets and adjustements and some minor things to help debugging.

Regression-wise QA reported quite a few issues on ivb, but all of them
turned out to be hw stability issues which are already fixed in
drm-intel-fixes (QA runs the nightly regression tests on -next alone,
without -fixes automatically merged in). There's still one issue open on
snb, it looks like occlusion query writes are not quite as cache coherent
as we've expected. With some of the pwrite adjustements we can now
reliably hit this. Kernel workaround for it is in the works."

* 'drm-intel-next' of git://people.freedesktop.org/~danvet/drm-intel: (101 commits)
  drm/i915: VCS is not the last ring
  drm/i915: Add a dual link lvds quirk for MacBook Pro 8,2
  drm/i915: make quirks more verbose
  drm/i915: dump the DMA fetch addr register on pre-gen6
  drm/i915/sdvo: Include YRPB as an additional TV output type
  drm/i915: disallow gem init ioctl on ilk
  drm/i915: refuse to load on gen6+ without kms
  drm/i915: extract gt interrupt handler
  drm/i915: use render gen to switch ring irq functions
  drm/i915: rip out old HWSTAM missed irq WA for vlv
  drm/i915: open code gen6+ ring irqs
  drm/i915: ring irq cleanups
  drm/i915: add SFUSE_STRAP registers for digital port detection
  drm/i915: add WM_LINETIME registers
  drm/i915: add WRPLL clocks
  drm/i915: add LCPLL control registers
  drm/i915: add SSC offsets for SBI access
  drm/i915: add port clock selection support for HSW
  drm/i915: add S PLL control
  drm/i915: add PIXCLK_GATE register
  ...

Conflicts:
	drivers/char/agp/intel-agp.h
	drivers/char/agp/intel-gtt.c
	drivers/gpu/drm/i915/i915_debugfs.c
上级 6a7068b4 ec34a01d
展开全部 隐藏空白更改
内联 并排
Showing with 2587 addition and 1137 deletion
Documentation/kernel-parameters.txt
浏览文件 @ effbc4fd
......@@ -982,6 +982,20 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
i8k.restricted [HW] Allow controlling fans only if SYS_ADMIN
capability is set.
i915.invert_brightness=
[DRM] Invert the sense of the variable that is used to
set the brightness of the panel backlight. Normally a
brightness value of 0 indicates backlight switched off,
and the maximum of the brightness value sets the backlight
to maximum brightness. If this parameter is set to 0
(default) and the machine requires it, or this parameter
is set to 1, a brightness value of 0 sets the backlight
to maximum brightness, and the maximum of the brightness
value switches the backlight off.
-1 -- never invert brightness
0 -- machine default
1 -- force brightness inversion
icn= [HW,ISDN]
Format: <io>[,<membase>[,<icn_id>[,<icn_id2>]]]
......
drivers/char/agp/intel-agp.c
浏览文件 @ effbc4fd
......@@ -907,6 +907,7 @@ static struct pci_device_id agp_intel_pci_table[] = {
ID(PCI_DEVICE_ID_INTEL_IVYBRIDGE_HB),
ID(PCI_DEVICE_ID_INTEL_IVYBRIDGE_M_HB),
ID(PCI_DEVICE_ID_INTEL_IVYBRIDGE_S_HB),
ID(PCI_DEVICE_ID_INTEL_VALLEYVIEW_HB),
{ }
};
......
drivers/char/agp/intel-agp.h
浏览文件 @ effbc4fd
......@@ -96,6 +96,7 @@
#define G4x_GMCH_SIZE_VT_2M (G4x_GMCH_SIZE_2M | G4x_GMCH_SIZE_VT_EN)
#define GFX_FLSH_CNTL 0x2170 /* 915+ */
#define GFX_FLSH_CNTL_VLV 0x101008
#define I810_DRAM_CTL 0x3000
#define I810_DRAM_ROW_0 0x00000001
......@@ -235,6 +236,19 @@
#define PCI_DEVICE_ID_INTEL_IVYBRIDGE_S_HB 0x0158 /* Server */
#define PCI_DEVICE_ID_INTEL_IVYBRIDGE_S_GT1_IG 0x015A
#define PCI_DEVICE_ID_INTEL_IVYBRIDGE_S_GT2_IG 0x016A
#define PCI_DEVICE_ID_INTEL_VALLEYVIEW_HB 0x0F00 /* VLV1 */
#define PCI_DEVICE_ID_INTEL_VALLEYVIEW_IG 0x0F30
#define PCI_DEVICE_ID_INTEL_HASWELL_HB 0x0400 /* Desktop */
#define PCI_DEVICE_ID_INTEL_HASWELL_D_GT1_IG 0x0402
#define PCI_DEVICE_ID_INTEL_HASWELL_D_GT2_IG 0x0412
#define PCI_DEVICE_ID_INTEL_HASWELL_M_HB 0x0404 /* Mobile */
#define PCI_DEVICE_ID_INTEL_HASWELL_M_GT1_IG 0x0406
#define PCI_DEVICE_ID_INTEL_HASWELL_M_GT2_IG 0x0416
#define PCI_DEVICE_ID_INTEL_HASWELL_S_HB 0x0408 /* Server */
#define PCI_DEVICE_ID_INTEL_HASWELL_S_GT1_IG 0x040a
#define PCI_DEVICE_ID_INTEL_HASWELL_S_GT2_IG 0x041a
#define PCI_DEVICE_ID_INTEL_HASWELL_SDV 0x0c16 /* SDV */
#define PCI_DEVICE_ID_INTEL_HASWELL_E_HB 0x0c04
int intel_gmch_probe(struct pci_dev *pdev,
struct agp_bridge_data *bridge);
......
drivers/char/agp/intel-gtt.c
浏览文件 @ effbc4fd
......@@ -1179,6 +1179,20 @@ static void gen6_write_entry(dma_addr_t addr, unsigned int entry,
writel(addr | pte_flags, intel_private.gtt + entry);
}
static void valleyview_write_entry(dma_addr_t addr, unsigned int entry,
unsigned int flags)
{
u32 pte_flags;
pte_flags = GEN6_PTE_UNCACHED | I810_PTE_VALID;
/* gen6 has bit11-4 for physical addr bit39-32 */
addr |= (addr >> 28) & 0xff0;
writel(addr | pte_flags, intel_private.gtt + entry);
writel(1, intel_private.registers + GFX_FLSH_CNTL_VLV);
}
static void gen6_cleanup(void)
{
}
......@@ -1205,12 +1219,16 @@ static inline int needs_idle_maps(void)
static int i9xx_setup(void)
{
u32 reg_addr;
int size = KB(512);
pci_read_config_dword(intel_private.pcidev, I915_MMADDR, &reg_addr);
reg_addr &= 0xfff80000;
intel_private.registers = ioremap(reg_addr, 128 * 4096);
if (INTEL_GTT_GEN >= 7)
size = MB(2);
intel_private.registers = ioremap(reg_addr, size);
if (!intel_private.registers)
return -ENOMEM;
......@@ -1354,6 +1372,15 @@ static const struct intel_gtt_driver sandybridge_gtt_driver = {
.check_flags = gen6_check_flags,
.chipset_flush = i9xx_chipset_flush,
};
static const struct intel_gtt_driver valleyview_gtt_driver = {
.gen = 7,
.setup = i9xx_setup,
.cleanup = gen6_cleanup,
.write_entry = valleyview_write_entry,
.dma_mask_size = 40,
.check_flags = gen6_check_flags,
.chipset_flush = i9xx_chipset_flush,
};
/* Table to describe Intel GMCH and AGP/PCIE GART drivers. At least one of
* driver and gmch_driver must be non-null, and find_gmch will determine
......@@ -1460,6 +1487,22 @@ static const struct intel_gtt_driver_description {
"Ivybridge", &sandybridge_gtt_driver },
{ PCI_DEVICE_ID_INTEL_IVYBRIDGE_S_GT2_IG,
"Ivybridge", &sandybridge_gtt_driver },
{ PCI_DEVICE_ID_INTEL_VALLEYVIEW_IG,
"ValleyView", &valleyview_gtt_driver },
{ PCI_DEVICE_ID_INTEL_HASWELL_D_GT1_IG,
"Haswell", &sandybridge_gtt_driver },
{ PCI_DEVICE_ID_INTEL_HASWELL_D_GT2_IG,
"Haswell", &sandybridge_gtt_driver },
{ PCI_DEVICE_ID_INTEL_HASWELL_M_GT1_IG,
"Haswell", &sandybridge_gtt_driver },
{ PCI_DEVICE_ID_INTEL_HASWELL_M_GT2_IG,
"Haswell", &sandybridge_gtt_driver },
{ PCI_DEVICE_ID_INTEL_HASWELL_S_GT1_IG,
"Haswell", &sandybridge_gtt_driver },
{ PCI_DEVICE_ID_INTEL_HASWELL_S_GT2_IG,
"Haswell", &sandybridge_gtt_driver },
{ PCI_DEVICE_ID_INTEL_HASWELL_SDV,
"Haswell", &sandybridge_gtt_driver },
{ 0, NULL, NULL }
};
......
drivers/gpu/drm/drm_cache.c
浏览文件 @ effbc4fd
......@@ -98,3 +98,26 @@ drm_clflush_pages(struct page *pages[], unsigned long num_pages)
#endif
}
EXPORT_SYMBOL(drm_clflush_pages);
void
drm_clflush_virt_range(char *addr, unsigned long length)
{
#if defined(CONFIG_X86)
if (cpu_has_clflush) {
char *end = addr + length;
mb();
for (; addr < end; addr += boot_cpu_data.x86_clflush_size)
clflush(addr);
clflush(end - 1);
mb();
return;
}
if (on_each_cpu(drm_clflush_ipi_handler, NULL, 1) != 0)
printk(KERN_ERR "Timed out waiting for cache flush.\n");
#else
printk(KERN_ERR "Architecture has no drm_cache.c support\n");
WARN_ON_ONCE(1);
#endif
}
EXPORT_SYMBOL(drm_clflush_virt_range);
drivers/gpu/drm/i915/i915_debugfs.c
浏览文件 @ effbc4fd
......@@ -468,7 +468,45 @@ static int i915_interrupt_info(struct seq_file *m, void *data)
if (ret)
return ret;
if (!HAS_PCH_SPLIT(dev)) {
if (IS_VALLEYVIEW(dev)) {
seq_printf(m, "Display IER:\t%08x\n",
I915_READ(VLV_IER));
seq_printf(m, "Display IIR:\t%08x\n",
I915_READ(VLV_IIR));
seq_printf(m, "Display IIR_RW:\t%08x\n",
I915_READ(VLV_IIR_RW));
seq_printf(m, "Display IMR:\t%08x\n",
I915_READ(VLV_IMR));
for_each_pipe(pipe)
seq_printf(m, "Pipe %c stat:\t%08x\n",
pipe_name(pipe),
I915_READ(PIPESTAT(pipe)));
seq_printf(m, "Master IER:\t%08x\n",
I915_READ(VLV_MASTER_IER));
seq_printf(m, "Render IER:\t%08x\n",
I915_READ(GTIER));
seq_printf(m, "Render IIR:\t%08x\n",
I915_READ(GTIIR));
seq_printf(m, "Render IMR:\t%08x\n",
I915_READ(GTIMR));
seq_printf(m, "PM IER:\t\t%08x\n",
I915_READ(GEN6_PMIER));
seq_printf(m, "PM IIR:\t\t%08x\n",
I915_READ(GEN6_PMIIR));
seq_printf(m, "PM IMR:\t\t%08x\n",
I915_READ(GEN6_PMIMR));
seq_printf(m, "Port hotplug:\t%08x\n",
I915_READ(PORT_HOTPLUG_EN));
seq_printf(m, "DPFLIPSTAT:\t%08x\n",
I915_READ(VLV_DPFLIPSTAT));
seq_printf(m, "DPINVGTT:\t%08x\n",
I915_READ(DPINVGTT));
} else if (!HAS_PCH_SPLIT(dev)) {
seq_printf(m, "Interrupt enable: %08x\n",
I915_READ(IER));
seq_printf(m, "Interrupt identity: %08x\n",
......@@ -704,6 +742,7 @@ static void i915_ring_error_state(struct seq_file *m,
struct drm_i915_error_state *error,
unsigned ring)
{
BUG_ON(ring >= I915_NUM_RINGS); /* shut up confused gcc */
seq_printf(m, "%s command stream:\n", ring_str(ring));
seq_printf(m, " HEAD: 0x%08x\n", error->head[ring]);
seq_printf(m, " TAIL: 0x%08x\n", error->tail[ring]);
......@@ -718,8 +757,8 @@ static void i915_ring_error_state(struct seq_file *m,
if (INTEL_INFO(dev)->gen >= 4)
seq_printf(m, " INSTPS: 0x%08x\n", error->instps[ring]);
seq_printf(m, " INSTPM: 0x%08x\n", error->instpm[ring]);
seq_printf(m, " FADDR: 0x%08x\n", error->faddr[ring]);
if (INTEL_INFO(dev)->gen >= 6) {
seq_printf(m, " FADDR: 0x%08x\n", error->faddr[ring]);
seq_printf(m, " FAULT_REG: 0x%08x\n", error->fault_reg[ring]);
seq_printf(m, " SYNC_0: 0x%08x\n",
error->semaphore_mboxes[ring][0]);
......@@ -1502,6 +1541,53 @@ static int i915_ppgtt_info(struct seq_file *m, void *data)
return 0;
}
static int i915_dpio_info(struct seq_file *m, void *data)
{
struct drm_info_node *node = (struct drm_info_node *) m->private;
struct drm_device *dev = node->minor->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
if (!IS_VALLEYVIEW(dev)) {
seq_printf(m, "unsupported\n");
return 0;
}
ret = mutex_lock_interruptible(&dev->mode_config.mutex);
if (ret)
return ret;
seq_printf(m, "DPIO_CTL: 0x%08x\n", I915_READ(DPIO_CTL));
seq_printf(m, "DPIO_DIV_A: 0x%08x\n",
intel_dpio_read(dev_priv, _DPIO_DIV_A));
seq_printf(m, "DPIO_DIV_B: 0x%08x\n",
intel_dpio_read(dev_priv, _DPIO_DIV_B));
seq_printf(m, "DPIO_REFSFR_A: 0x%08x\n",
intel_dpio_read(dev_priv, _DPIO_REFSFR_A));
seq_printf(m, "DPIO_REFSFR_B: 0x%08x\n",
intel_dpio_read(dev_priv, _DPIO_REFSFR_B));
seq_printf(m, "DPIO_CORE_CLK_A: 0x%08x\n",
intel_dpio_read(dev_priv, _DPIO_CORE_CLK_A));
seq_printf(m, "DPIO_CORE_CLK_B: 0x%08x\n",
intel_dpio_read(dev_priv, _DPIO_CORE_CLK_B));
seq_printf(m, "DPIO_LFP_COEFF_A: 0x%08x\n",
intel_dpio_read(dev_priv, _DPIO_LFP_COEFF_A));
seq_printf(m, "DPIO_LFP_COEFF_B: 0x%08x\n",
intel_dpio_read(dev_priv, _DPIO_LFP_COEFF_B));
seq_printf(m, "DPIO_FASTCLK_DISABLE: 0x%08x\n",
intel_dpio_read(dev_priv, DPIO_FASTCLK_DISABLE));
mutex_unlock(&dev->mode_config.mutex);
return 0;
}
static ssize_t
i915_wedged_read(struct file *filp,
char __user *ubuf,
......@@ -1836,6 +1922,7 @@ static struct drm_info_list i915_debugfs_list[] = {
{"i915_gen6_forcewake_count", i915_gen6_forcewake_count_info, 0},
{"i915_swizzle_info", i915_swizzle_info, 0},
{"i915_ppgtt_info", i915_ppgtt_info, 0},
{"i915_dpio", i915_dpio_info, 0},
};
#define I915_DEBUGFS_ENTRIES ARRAY_SIZE(i915_debugfs_list)
......
drivers/gpu/drm/i915/i915_dma.c
浏览文件 @ effbc4fd
......@@ -26,6 +26,8 @@
*
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include "drmP.h"
#include "drm.h"
#include "drm_crtc_helper.h"
......@@ -43,6 +45,7 @@
#include <linux/slab.h>
#include <linux/module.h>
#include <acpi/video.h>
#include <asm/pat.h>
static void i915_write_hws_pga(struct drm_device *dev)
{
......@@ -787,6 +790,9 @@ static int i915_getparam(struct drm_device *dev, void *data,
case I915_PARAM_HAS_LLC:
value = HAS_LLC(dev);
break;
case I915_PARAM_HAS_ALIASING_PPGTT:
value = dev_priv->mm.aliasing_ppgtt ? 1 : 0;
break;
default:
DRM_DEBUG_DRIVER("Unknown parameter %d\n",
param->param);
......@@ -1158,14 +1164,14 @@ static void i915_switcheroo_set_state(struct pci_dev *pdev, enum vga_switcheroo_
struct drm_device *dev = pci_get_drvdata(pdev);
pm_message_t pmm = { .event = PM_EVENT_SUSPEND };
if (state == VGA_SWITCHEROO_ON) {
printk(KERN_INFO "i915: switched on\n");
pr_info("switched on\n");
dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
/* i915 resume handler doesn't set to D0 */
pci_set_power_state(dev->pdev, PCI_D0);
i915_resume(dev);
dev->switch_power_state = DRM_SWITCH_POWER_ON;
} else {
printk(KERN_ERR "i915: switched off\n");
pr_err("switched off\n");
dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
i915_suspend(dev, pmm);
dev->switch_power_state = DRM_SWITCH_POWER_OFF;
......@@ -1216,10 +1222,8 @@ static int i915_load_gem_init(struct drm_device *dev)
/* PPGTT pdes are stolen from global gtt ptes, so shrink the
* aperture accordingly when using aliasing ppgtt. */
gtt_size -= I915_PPGTT_PD_ENTRIES*PAGE_SIZE;
/* For paranoia keep the guard page in between. */
gtt_size -= PAGE_SIZE;
i915_gem_do_init(dev, 0, mappable_size, gtt_size);
i915_gem_init_global_gtt(dev, 0, mappable_size, gtt_size);
ret = i915_gem_init_aliasing_ppgtt(dev);
if (ret) {
......@@ -1237,7 +1241,8 @@ static int i915_load_gem_init(struct drm_device *dev)
* should be enough to keep any prefetching inside of the
* aperture.
*/
i915_gem_do_init(dev, 0, mappable_size, gtt_size - PAGE_SIZE);
i915_gem_init_global_gtt(dev, 0, mappable_size,
gtt_size);
}
ret = i915_gem_init_hw(dev);
......@@ -1931,6 +1936,29 @@ ips_ping_for_i915_load(void)
}
}
static void
i915_mtrr_setup(struct drm_i915_private *dev_priv, unsigned long base,
unsigned long size)
{
dev_priv->mm.gtt_mtrr = -1;
#if defined(CONFIG_X86_PAT)
if (cpu_has_pat)
return;
#endif
/* Set up a WC MTRR for non-PAT systems. This is more common than
* one would think, because the kernel disables PAT on first
* generation Core chips because WC PAT gets overridden by a UC
* MTRR if present. Even if a UC MTRR isn't present.
*/
dev_priv->mm.gtt_mtrr = mtrr_add(base, size, MTRR_TYPE_WRCOMB, 1);
if (dev_priv->mm.gtt_mtrr < 0) {
DRM_INFO("MTRR allocation failed. Graphics "
"performance may suffer.\n");
}
}
/**
* i915_driver_load - setup chip and create an initial config
* @dev: DRM device
......@@ -1945,8 +1973,16 @@ ips_ping_for_i915_load(void)
int i915_driver_load(struct drm_device *dev, unsigned long flags)
{
struct drm_i915_private *dev_priv;
struct intel_device_info *info;
int ret = 0, mmio_bar;
uint32_t agp_size;
uint32_t aperture_size;
info = (struct intel_device_info *) flags;
/* Refuse to load on gen6+ without kms enabled. */
if (info->gen >= 6 && !drm_core_check_feature(dev, DRIVER_MODESET))
return -ENODEV;
/* i915 has 4 more counters */
dev->counters += 4;
......@@ -1961,7 +1997,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
dev->dev_private = (void *)dev_priv;
dev_priv->dev = dev;
dev_priv->info = (struct intel_device_info *) flags;
dev_priv->info = info;
if (i915_get_bridge_dev(dev)) {
ret = -EIO;
......@@ -2000,27 +2036,16 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
goto out_rmmap;
}
agp_size = dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT;
aperture_size = dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT;
dev_priv->mm.gtt_mapping =
io_mapping_create_wc(dev->agp->base, agp_size);
io_mapping_create_wc(dev->agp->base, aperture_size);
if (dev_priv->mm.gtt_mapping == NULL) {
ret = -EIO;
goto out_rmmap;
}
/* Set up a WC MTRR for non-PAT systems. This is more common than
* one would think, because the kernel disables PAT on first
* generation Core chips because WC PAT gets overridden by a UC
* MTRR if present. Even if a UC MTRR isn't present.
*/
dev_priv->mm.gtt_mtrr = mtrr_add(dev->agp->base,
agp_size,
MTRR_TYPE_WRCOMB, 1);
if (dev_priv->mm.gtt_mtrr < 0) {
DRM_INFO("MTRR allocation failed. Graphics "
"performance may suffer.\n");
}
i915_mtrr_setup(dev_priv, dev->agp->base, aperture_size);
/* The i915 workqueue is primarily used for batched retirement of
* requests (and thus managing bo) once the task has been completed
......@@ -2272,7 +2297,7 @@ int i915_driver_open(struct drm_device *dev, struct drm_file *file)
* mode setting case, we want to restore the kernel's initial mode (just
* in case the last client left us in a bad state).
*
* Additionally, in the non-mode setting case, we'll tear down the AGP
* Additionally, in the non-mode setting case, we'll tear down the GTT
* and DMA structures, since the kernel won't be using them, and clea
* up any GEM state.
*/
......@@ -2350,16 +2375,10 @@ struct drm_ioctl_desc i915_ioctls[] = {
int i915_max_ioctl = DRM_ARRAY_SIZE(i915_ioctls);
/**
* Determine if the device really is AGP or not.
*
* All Intel graphics chipsets are treated as AGP, even if they are really
* PCI-e.
*
* \param dev The device to be tested.
*
* \returns
* A value of 1 is always retured to indictate every i9x5 is AGP.
/*
* This is really ugly: Because old userspace abused the linux agp interface to
* manage the gtt, we need to claim that all intel devices are agp. For
* otherwise the drm core refuses to initialize the agp support code.
*/
int i915_driver_device_is_agp(struct drm_device * dev)
{
......
drivers/gpu/drm/i915/i915_drv.c
浏览文件 @ effbc4fd
......@@ -84,6 +84,12 @@ MODULE_PARM_DESC(lvds_downclock,
"Use panel (LVDS/eDP) downclocking for power savings "
"(default: false)");
int i915_lvds_channel_mode __read_mostly;
module_param_named(lvds_channel_mode, i915_lvds_channel_mode, int, 0600);
MODULE_PARM_DESC(lvds_channel_mode,
"Specify LVDS channel mode "
"(0=probe BIOS [default], 1=single-channel, 2=dual-channel)");
int i915_panel_use_ssc __read_mostly = -1;
module_param_named(lvds_use_ssc, i915_panel_use_ssc, int, 0600);
MODULE_PARM_DESC(lvds_use_ssc,
......@@ -93,8 +99,8 @@ MODULE_PARM_DESC(lvds_use_ssc,
int i915_vbt_sdvo_panel_type __read_mostly = -1;
module_param_named(vbt_sdvo_panel_type, i915_vbt_sdvo_panel_type, int, 0600);
MODULE_PARM_DESC(vbt_sdvo_panel_type,
"Override selection of SDVO panel mode in the VBT "
"(default: auto)");
"Override/Ignore selection of SDVO panel mode in the VBT "
"(-2=ignore, -1=auto [default], index in VBT BIOS table)");
static bool i915_try_reset __read_mostly = true;
module_param_named(reset, i915_try_reset, bool, 0600);
......@@ -209,6 +215,7 @@ static const struct intel_device_info intel_ironlake_d_info = {
.gen = 5,
.need_gfx_hws = 1, .has_hotplug = 1,
.has_bsd_ring = 1,
.has_pch_split = 1,
};
static const struct intel_device_info intel_ironlake_m_info = {
......@@ -216,6 +223,7 @@ static const struct intel_device_info intel_ironlake_m_info = {
.need_gfx_hws = 1, .has_hotplug = 1,
.has_fbc = 1,
.has_bsd_ring = 1,
.has_pch_split = 1,
};
static const struct intel_device_info intel_sandybridge_d_info = {
......@@ -224,6 +232,7 @@ static const struct intel_device_info intel_sandybridge_d_info = {
.has_bsd_ring = 1,
.has_blt_ring = 1,
.has_llc = 1,
.has_pch_split = 1,
};
static const struct intel_device_info intel_sandybridge_m_info = {
......@@ -233,6 +242,7 @@ static const struct intel_device_info intel_sandybridge_m_info = {
.has_bsd_ring = 1,
.has_blt_ring = 1,
.has_llc = 1,
.has_pch_split = 1,
};
static const struct intel_device_info intel_ivybridge_d_info = {
......@@ -241,6 +251,7 @@ static const struct intel_device_info intel_ivybridge_d_info = {
.has_bsd_ring = 1,
.has_blt_ring = 1,
.has_llc = 1,
.has_pch_split = 1,
};
static const struct intel_device_info intel_ivybridge_m_info = {
......@@ -250,6 +261,43 @@ static const struct intel_device_info intel_ivybridge_m_info = {
.has_bsd_ring = 1,
.has_blt_ring = 1,
.has_llc = 1,
.has_pch_split = 1,
};
static const struct intel_device_info intel_valleyview_m_info = {
.gen = 7, .is_mobile = 1,
.need_gfx_hws = 1, .has_hotplug = 1,
.has_fbc = 0,
.has_bsd_ring = 1,
.has_blt_ring = 1,
.is_valleyview = 1,
};
static const struct intel_device_info intel_valleyview_d_info = {
.gen = 7,
.need_gfx_hws = 1, .has_hotplug = 1,
.has_fbc = 0,
.has_bsd_ring = 1,
.has_blt_ring = 1,
.is_valleyview = 1,
};
static const struct intel_device_info intel_haswell_d_info = {
.is_haswell = 1, .gen = 7,
.need_gfx_hws = 1, .has_hotplug = 1,
.has_bsd_ring = 1,
.has_blt_ring = 1,
.has_llc = 1,
.has_pch_split = 1,
};
static const struct intel_device_info intel_haswell_m_info = {
.is_haswell = 1, .gen = 7, .is_mobile = 1,
.need_gfx_hws = 1, .has_hotplug = 1,
.has_bsd_ring = 1,
.has_blt_ring = 1,
.has_llc = 1,
.has_pch_split = 1,
};
static const struct pci_device_id pciidlist[] = { /* aka */
......@@ -308,6 +356,7 @@ MODULE_DEVICE_TABLE(pci, pciidlist);
#define INTEL_PCH_IBX_DEVICE_ID_TYPE 0x3b00
#define INTEL_PCH_CPT_DEVICE_ID_TYPE 0x1c00
#define INTEL_PCH_PPT_DEVICE_ID_TYPE 0x1e00
#define INTEL_PCH_LPT_DEVICE_ID_TYPE 0x8c00
void intel_detect_pch(struct drm_device *dev)
{
......@@ -336,6 +385,9 @@ void intel_detect_pch(struct drm_device *dev)
/* PantherPoint is CPT compatible */
dev_priv->pch_type = PCH_CPT;
DRM_DEBUG_KMS("Found PatherPoint PCH\n");
} else if (id == INTEL_PCH_LPT_DEVICE_ID_TYPE) {
dev_priv->pch_type = PCH_LPT;
DRM_DEBUG_KMS("Found LynxPoint PCH\n");
}
}
pci_dev_put(pch);
......@@ -446,6 +498,31 @@ int __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv)
return ret;
}
void vlv_force_wake_get(struct drm_i915_private *dev_priv)
{
int count;
count = 0;
/* Already awake? */
if ((I915_READ(0x130094) & 0xa1) == 0xa1)
return;
I915_WRITE_NOTRACE(FORCEWAKE_VLV, 0xffffffff);
POSTING_READ(FORCEWAKE_VLV);
count = 0;
while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_ACK_VLV) & 1) == 0)
udelay(10);
}
void vlv_force_wake_put(struct drm_i915_private *dev_priv)
{
I915_WRITE_NOTRACE(FORCEWAKE_VLV, 0xffff0000);
/* FIXME: confirm VLV behavior with Punit folks */
POSTING_READ(FORCEWAKE_VLV);
}
static int i915_drm_freeze(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
......@@ -993,6 +1070,13 @@ MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL and additional rights");
/* We give fast paths for the really cool registers */
#define NEEDS_FORCE_WAKE(dev_priv, reg) \
(((dev_priv)->info->gen >= 6) && \
((reg) < 0x40000) && \
((reg) != FORCEWAKE)) && \
(!IS_VALLEYVIEW((dev_priv)->dev))
#define __i915_read(x, y) \
u##x i915_read##x(struct drm_i915_private *dev_priv, u32 reg) { \
u##x val = 0; \
......
drivers/gpu/drm/i915/i915_drv.h
浏览文件 @ effbc4fd
......@@ -63,6 +63,16 @@ enum plane {
};
#define plane_name(p) ((p) + 'A')
enum port {
PORT_A = 0,
PORT_B,
PORT_C,
PORT_D,
PORT_E,
I915_MAX_PORTS
};
#define port_name(p) ((p) + 'A')
#define I915_GEM_GPU_DOMAINS (~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
#define for_each_pipe(p) for ((p) = 0; (p) < dev_priv->num_pipe; (p)++)
......@@ -255,6 +265,9 @@ struct intel_device_info {
u8 is_broadwater:1;
u8 is_crestline:1;
u8 is_ivybridge:1;
u8 is_valleyview:1;
u8 has_pch_split:1;
u8 is_haswell:1;
u8 has_fbc:1;
u8 has_pipe_cxsr:1;
u8 has_hotplug:1;
......@@ -291,10 +304,12 @@ enum no_fbc_reason {
enum intel_pch {
PCH_IBX, /* Ibexpeak PCH */
PCH_CPT, /* Cougarpoint PCH */
PCH_LPT, /* Lynxpoint PCH */
};
#define QUIRK_PIPEA_FORCE (1<<0)
#define QUIRK_LVDS_SSC_DISABLE (1<<1)
#define QUIRK_INVERT_BRIGHTNESS (1<<2)
struct intel_fbdev;
struct intel_fbc_work;
......@@ -302,7 +317,6 @@ struct intel_fbc_work;
struct intel_gmbus {
struct i2c_adapter adapter;
bool force_bit;
bool has_gpio;
u32 reg0;
u32 gpio_reg;
struct i2c_algo_bit_data bit_algo;
......@@ -326,12 +340,17 @@ typedef struct drm_i915_private {
/** gt_lock is also taken in irq contexts. */
struct spinlock gt_lock;
struct intel_gmbus *gmbus;
struct intel_gmbus gmbus[GMBUS_NUM_PORTS];
/** gmbus_mutex protects against concurrent usage of the single hw gmbus
* controller on different i2c buses. */
struct mutex gmbus_mutex;
/**
* Base address of the gmbus and gpio block.
*/
uint32_t gpio_mmio_base;
struct pci_dev *bridge_dev;
struct intel_ring_buffer ring[I915_NUM_RINGS];
uint32_t next_seqno;
......@@ -354,6 +373,10 @@ typedef struct drm_i915_private {
/* protects the irq masks */
spinlock_t irq_lock;
/* DPIO indirect register protection */
spinlock_t dpio_lock;
/** Cached value of IMR to avoid reads in updating the bitfield */
u32 pipestat[2];
u32 irq_mask;
......@@ -405,6 +428,8 @@ typedef struct drm_i915_private {
unsigned int lvds_use_ssc:1;
unsigned int display_clock_mode:1;
int lvds_ssc_freq;
unsigned int bios_lvds_val; /* initial [PCH_]LVDS reg val in VBIOS */
unsigned int lvds_val; /* used for checking LVDS channel mode */
struct {
int rate;
int lanes;
......@@ -881,6 +906,7 @@ struct drm_i915_gem_object {
unsigned int cache_level:2;
unsigned int has_aliasing_ppgtt_mapping:1;
unsigned int has_global_gtt_mapping:1;
struct page **pages;
......@@ -918,13 +944,6 @@ struct drm_i915_gem_object {
/** Record of address bit 17 of each page at last unbind. */
unsigned long *bit_17;
/**
* If present, while GEM_DOMAIN_CPU is in the read domain this array
* flags which individual pages are valid.
*/
uint8_t *page_cpu_valid;
/** User space pin count and filp owning the pin */
uint32_t user_pin_count;
struct drm_file *pin_filp;
......@@ -1001,6 +1020,8 @@ struct drm_i915_file_private {
#define IS_IRONLAKE_D(dev) ((dev)->pci_device == 0x0042)
#define IS_IRONLAKE_M(dev) ((dev)->pci_device == 0x0046)
#define IS_IVYBRIDGE(dev) (INTEL_INFO(dev)->is_ivybridge)
#define IS_VALLEYVIEW(dev) (INTEL_INFO(dev)->is_valleyview)
#define IS_HASWELL(dev) (INTEL_INFO(dev)->is_haswell)
#define IS_MOBILE(dev) (INTEL_INFO(dev)->is_mobile)
/*
......@@ -1044,10 +1065,11 @@ struct drm_i915_file_private {
#define HAS_PIPE_CXSR(dev) (INTEL_INFO(dev)->has_pipe_cxsr)
#define I915_HAS_FBC(dev) (INTEL_INFO(dev)->has_fbc)
#define HAS_PCH_SPLIT(dev) (IS_GEN5(dev) || IS_GEN6(dev) || IS_IVYBRIDGE(dev))
#define HAS_PCH_SPLIT(dev) (INTEL_INFO(dev)->has_pch_split)
#define HAS_PIPE_CONTROL(dev) (INTEL_INFO(dev)->gen >= 5)
#define INTEL_PCH_TYPE(dev) (((struct drm_i915_private *)(dev)->dev_private)->pch_type)
#define HAS_PCH_LPT(dev) (INTEL_PCH_TYPE(dev) == PCH_LPT)
#define HAS_PCH_CPT(dev) (INTEL_PCH_TYPE(dev) == PCH_CPT)
#define HAS_PCH_IBX(dev) (INTEL_PCH_TYPE(dev) == PCH_IBX)
......@@ -1081,6 +1103,7 @@ extern int i915_panel_ignore_lid __read_mostly;
extern unsigned int i915_powersave __read_mostly;
extern int i915_semaphores __read_mostly;
extern unsigned int i915_lvds_downclock __read_mostly;
extern int i915_lvds_channel_mode __read_mostly;
extern int i915_panel_use_ssc __read_mostly;
extern int i915_vbt_sdvo_panel_type __read_mostly;
extern int i915_enable_rc6 __read_mostly;
......@@ -1264,10 +1287,6 @@ int __must_check i915_gem_init_hw(struct drm_device *dev);
void i915_gem_init_swizzling(struct drm_device *dev);
void i915_gem_init_ppgtt(struct drm_device *dev);
void i915_gem_cleanup_ringbuffer(struct drm_device *dev);
void i915_gem_do_init(struct drm_device *dev,
unsigned long start,
unsigned long mappable_end,
unsigned long end);
int __must_check i915_gpu_idle(struct drm_device *dev, bool do_retire);
int __must_check i915_gem_idle(struct drm_device *dev);
int __must_check i915_add_request(struct intel_ring_buffer *ring,
......@@ -1281,6 +1300,8 @@ int __must_check
i915_gem_object_set_to_gtt_domain(struct drm_i915_gem_object *obj,
bool write);
int __must_check
i915_gem_object_set_to_cpu_domain(struct drm_i915_gem_object *obj, bool write);
int __must_check
i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj,
u32 alignment,
struct intel_ring_buffer *pipelined);
......@@ -1311,10 +1332,15 @@ void i915_ppgtt_unbind_object(struct i915_hw_ppgtt *ppgtt,
struct drm_i915_gem_object *obj);
void i915_gem_restore_gtt_mappings(struct drm_device *dev);
int __must_check i915_gem_gtt_bind_object(struct drm_i915_gem_object *obj);
void i915_gem_gtt_rebind_object(struct drm_i915_gem_object *obj,
int __must_check i915_gem_gtt_prepare_object(struct drm_i915_gem_object *obj);
void i915_gem_gtt_bind_object(struct drm_i915_gem_object *obj,
enum i915_cache_level cache_level);
void i915_gem_gtt_unbind_object(struct drm_i915_gem_object *obj);
void i915_gem_gtt_finish_object(struct drm_i915_gem_object *obj);
void i915_gem_init_global_gtt(struct drm_device *dev,
unsigned long start,
unsigned long mappable_end,
unsigned long end);
/* i915_gem_evict.c */
int __must_check i915_gem_evict_something(struct drm_device *dev, int min_size,
......@@ -1357,6 +1383,13 @@ extern int i915_restore_state(struct drm_device *dev);
/* intel_i2c.c */
extern int intel_setup_gmbus(struct drm_device *dev);
extern void intel_teardown_gmbus(struct drm_device *dev);
extern inline bool intel_gmbus_is_port_valid(unsigned port)
{
return (port >= GMBUS_PORT_SSC && port <= GMBUS_PORT_DPD);
}
extern struct i2c_adapter *intel_gmbus_get_adapter(
struct drm_i915_private *dev_priv, unsigned port);
extern void intel_gmbus_set_speed(struct i2c_adapter *adapter, int speed);
extern void intel_gmbus_force_bit(struct i2c_adapter *adapter, bool force_bit);
extern inline bool intel_gmbus_is_forced_bit(struct i2c_adapter *adapter)
......@@ -1409,6 +1442,9 @@ extern void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv);
extern void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv);
extern void __gen6_gt_force_wake_mt_put(struct drm_i915_private *dev_priv);
extern void vlv_force_wake_get(struct drm_i915_private *dev_priv);
extern void vlv_force_wake_put(struct drm_i915_private *dev_priv);
/* overlay */
#ifdef CONFIG_DEBUG_FS
extern struct intel_overlay_error_state *intel_overlay_capture_error_state(struct drm_device *dev);
......@@ -1450,12 +1486,6 @@ void gen6_gt_force_wake_get(struct drm_i915_private *dev_priv);
void gen6_gt_force_wake_put(struct drm_i915_private *dev_priv);
int __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv);
/* We give fast paths for the really cool registers */
#define NEEDS_FORCE_WAKE(dev_priv, reg) \
(((dev_priv)->info->gen >= 6) && \
((reg) < 0x40000) && \
((reg) != FORCEWAKE))
#define __i915_read(x, y) \
u##x i915_read##x(struct drm_i915_private *dev_priv, u32 reg);
......
drivers/gpu/drm/i915/i915_gem.c
浏览文件 @ effbc4fd
此差异已折叠。
drivers/gpu/drm/i915/i915_gem_execbuffer.c
浏览文件 @ effbc4fd
......@@ -266,6 +266,12 @@ eb_destroy(struct eb_objects *eb)
kfree(eb);
}
static inline int use_cpu_reloc(struct drm_i915_gem_object *obj)
{
return (obj->base.write_domain == I915_GEM_DOMAIN_CPU ||
obj->cache_level != I915_CACHE_NONE);
}
static int
i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj,
struct eb_objects *eb,
......@@ -273,6 +279,7 @@ i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj,
{
struct drm_device *dev = obj->base.dev;
struct drm_gem_object *target_obj;
struct drm_i915_gem_object *target_i915_obj;
uint32_t target_offset;
int ret = -EINVAL;
......@@ -281,7 +288,8 @@ i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj,
if (unlikely(target_obj == NULL))
return -ENOENT;
target_offset = to_intel_bo(target_obj)->gtt_offset;
target_i915_obj = to_intel_bo(target_obj);
target_offset = target_i915_obj->gtt_offset;
/* The target buffer should have appeared before us in the
* exec_object list, so it should have a GTT space bound by now.
......@@ -352,11 +360,19 @@ i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj,
return ret;
}
/* We can't wait for rendering with pagefaults disabled */
if (obj->active && in_atomic())
return -EFAULT;
reloc->delta += target_offset;
if (obj->base.write_domain == I915_GEM_DOMAIN_CPU) {
if (use_cpu_reloc(obj)) {
uint32_t page_offset = reloc->offset & ~PAGE_MASK;
char *vaddr;
ret = i915_gem_object_set_to_cpu_domain(obj, 1);
if (ret)
return ret;
vaddr = kmap_atomic(obj->pages[reloc->offset >> PAGE_SHIFT]);
*(uint32_t *)(vaddr + page_offset) = reloc->delta;
kunmap_atomic(vaddr);
......@@ -365,10 +381,6 @@ i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj,
uint32_t __iomem *reloc_entry;
void __iomem *reloc_page;
/* We can't wait for rendering with pagefaults disabled */
if (obj->active && in_atomic())
return -EFAULT;
ret = i915_gem_object_set_to_gtt_domain(obj, 1);
if (ret)
return ret;
......@@ -383,6 +395,16 @@ i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj,
io_mapping_unmap_atomic(reloc_page);
}
/* Sandybridge PPGTT errata: We need a global gtt mapping for MI and
* pipe_control writes because the gpu doesn't properly redirect them
* through the ppgtt for non_secure batchbuffers. */
if (unlikely(IS_GEN6(dev) &&
reloc->write_domain == I915_GEM_DOMAIN_INSTRUCTION &&
!target_i915_obj->has_global_gtt_mapping)) {
i915_gem_gtt_bind_object(target_i915_obj,
target_i915_obj->cache_level);
}
/* and update the user's relocation entry */
reloc->presumed_offset = target_offset;
......@@ -393,30 +415,46 @@ static int
i915_gem_execbuffer_relocate_object(struct drm_i915_gem_object *obj,
struct eb_objects *eb)
{
#define N_RELOC(x) ((x) / sizeof(struct drm_i915_gem_relocation_entry))
struct drm_i915_gem_relocation_entry stack_reloc[N_RELOC(512)];
struct drm_i915_gem_relocation_entry __user *user_relocs;
struct drm_i915_gem_exec_object2 *entry = obj->exec_entry;
int i, ret;
int remain, ret;
user_relocs = (void __user *)(uintptr_t)entry->relocs_ptr;
for (i = 0; i < entry->relocation_count; i++) {
struct drm_i915_gem_relocation_entry reloc;
if (__copy_from_user_inatomic(&reloc,
user_relocs+i,
sizeof(reloc)))
remain = entry->relocation_count;
while (remain) {
struct drm_i915_gem_relocation_entry *r = stack_reloc;
int count = remain;
if (count > ARRAY_SIZE(stack_reloc))
count = ARRAY_SIZE(stack_reloc);
remain -= count;
if (__copy_from_user_inatomic(r, user_relocs, count*sizeof(r[0])))
return -EFAULT;
ret = i915_gem_execbuffer_relocate_entry(obj, eb, &reloc);
if (ret)
return ret;
do {
u64 offset = r->presumed_offset;
if (__copy_to_user_inatomic(&user_relocs[i].presumed_offset,
&reloc.presumed_offset,
sizeof(reloc.presumed_offset)))
return -EFAULT;
ret = i915_gem_execbuffer_relocate_entry(obj, eb, r);
if (ret)
return ret;
if (r->presumed_offset != offset &&
__copy_to_user_inatomic(&user_relocs->presumed_offset,
&r->presumed_offset,
sizeof(r->presumed_offset))) {
return -EFAULT;
}
user_relocs++;
r++;
} while (--count);
}
return 0;
#undef N_RELOC
}
static int
......@@ -464,6 +502,13 @@ i915_gem_execbuffer_relocate(struct drm_device *dev,
#define __EXEC_OBJECT_HAS_FENCE (1<<31)
static int
need_reloc_mappable(struct drm_i915_gem_object *obj)
{
struct drm_i915_gem_exec_object2 *entry = obj->exec_entry;
return entry->relocation_count && !use_cpu_reloc(obj);
}
static int
pin_and_fence_object(struct drm_i915_gem_object *obj,
struct intel_ring_buffer *ring)
......@@ -477,8 +522,7 @@ pin_and_fence_object(struct drm_i915_gem_object *obj,
has_fenced_gpu_access &&
entry->flags & EXEC_OBJECT_NEEDS_FENCE &&
obj->tiling_mode != I915_TILING_NONE;
need_mappable =
entry->relocation_count ? true : need_fence;
need_mappable = need_fence || need_reloc_mappable(obj);
ret = i915_gem_object_pin(obj, entry->alignment, need_mappable);
if (ret)
......@@ -535,8 +579,7 @@ i915_gem_execbuffer_reserve(struct intel_ring_buffer *ring,
has_fenced_gpu_access &&
entry->flags & EXEC_OBJECT_NEEDS_FENCE &&
obj->tiling_mode != I915_TILING_NONE;
need_mappable =
entry->relocation_count ? true : need_fence;
need_mappable = need_fence || need_reloc_mappable(obj);
if (need_mappable)
list_move(&obj->exec_list, &ordered_objects);
......@@ -576,8 +619,7 @@ i915_gem_execbuffer_reserve(struct intel_ring_buffer *ring,
has_fenced_gpu_access &&
entry->flags & EXEC_OBJECT_NEEDS_FENCE &&
obj->tiling_mode != I915_TILING_NONE;
need_mappable =
entry->relocation_count ? true : need_fence;
need_mappable = need_fence || need_reloc_mappable(obj);
if ((entry->alignment && obj->gtt_offset & (entry->alignment - 1)) ||
(need_mappable && !obj->map_and_fenceable))
......@@ -955,7 +997,7 @@ validate_exec_list(struct drm_i915_gem_exec_object2 *exec,
if (!access_ok(VERIFY_WRITE, ptr, length))
return -EFAULT;
if (fault_in_pages_readable(ptr, length))
if (fault_in_multipages_readable(ptr, length))
return -EFAULT;
}
......
drivers/gpu/drm/i915/i915_gem_gtt.c
浏览文件 @ effbc4fd
......@@ -346,42 +346,28 @@ void i915_gem_restore_gtt_mappings(struct drm_device *dev)
list_for_each_entry(obj, &dev_priv->mm.gtt_list, gtt_list) {
i915_gem_clflush_object(obj);
i915_gem_gtt_rebind_object(obj, obj->cache_level);
i915_gem_gtt_bind_object(obj, obj->cache_level);
}
intel_gtt_chipset_flush();
}
int i915_gem_gtt_bind_object(struct drm_i915_gem_object *obj)
int i915_gem_gtt_prepare_object(struct drm_i915_gem_object *obj)
{
struct drm_device *dev = obj->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
unsigned int agp_type = cache_level_to_agp_type(dev, obj->cache_level);
int ret;
if (dev_priv->mm.gtt->needs_dmar) {
ret = intel_gtt_map_memory(obj->pages,
obj->base.size >> PAGE_SHIFT,
&obj->sg_list,
&obj->num_sg);
if (ret != 0)
return ret;
intel_gtt_insert_sg_entries(obj->sg_list,
obj->num_sg,
obj->gtt_space->start >> PAGE_SHIFT,
agp_type);
} else
intel_gtt_insert_pages(obj->gtt_space->start >> PAGE_SHIFT,
obj->base.size >> PAGE_SHIFT,
obj->pages,
agp_type);
return 0;
if (dev_priv->mm.gtt->needs_dmar)
return intel_gtt_map_memory(obj->pages,
obj->base.size >> PAGE_SHIFT,
&obj->sg_list,
&obj->num_sg);
else
return 0;
}
void i915_gem_gtt_rebind_object(struct drm_i915_gem_object *obj,
enum i915_cache_level cache_level)
void i915_gem_gtt_bind_object(struct drm_i915_gem_object *obj,
enum i915_cache_level cache_level)
{
struct drm_device *dev = obj->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
......@@ -399,9 +385,19 @@ void i915_gem_gtt_rebind_object(struct drm_i915_gem_object *obj,
obj->base.size >> PAGE_SHIFT,
obj->pages,
agp_type);
obj->has_global_gtt_mapping = 1;
}
void i915_gem_gtt_unbind_object(struct drm_i915_gem_object *obj)
{
intel_gtt_clear_range(obj->gtt_space->start >> PAGE_SHIFT,
obj->base.size >> PAGE_SHIFT);
obj->has_global_gtt_mapping = 0;
}
void i915_gem_gtt_finish_object(struct drm_i915_gem_object *obj)
{
struct drm_device *dev = obj->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
......@@ -409,9 +405,6 @@ void i915_gem_gtt_unbind_object(struct drm_i915_gem_object *obj)
interruptible = do_idling(dev_priv);
intel_gtt_clear_range(obj->gtt_space->start >> PAGE_SHIFT,
obj->base.size >> PAGE_SHIFT);
if (obj->sg_list) {
intel_gtt_unmap_memory(obj->sg_list, obj->num_sg);
obj->sg_list = NULL;
......@@ -419,3 +412,23 @@ void i915_gem_gtt_unbind_object(struct drm_i915_gem_object *obj)
undo_idling(dev_priv, interruptible);
}
void i915_gem_init_global_gtt(struct drm_device *dev,
unsigned long start,
unsigned long mappable_end,
unsigned long end)
{
drm_i915_private_t *dev_priv = dev->dev_private;
/* Substract the guard page ... */
drm_mm_init(&dev_priv->mm.gtt_space, start, end - start - PAGE_SIZE);
dev_priv->mm.gtt_start = start;
dev_priv->mm.gtt_mappable_end = mappable_end;
dev_priv->mm.gtt_end = end;
dev_priv->mm.gtt_total = end - start;
dev_priv->mm.mappable_gtt_total = min(end, mappable_end) - start;
/* ... but ensure that we clear the entire range. */
intel_gtt_clear_range(start / PAGE_SIZE, (end-start) / PAGE_SIZE);
}
drivers/gpu/drm/i915/i915_irq.c
浏览文件 @ effbc4fd
此差异已折叠。
drivers/gpu/drm/i915/i915_reg.h
浏览文件 @ effbc4fd
......@@ -27,6 +27,8 @@
#define _PIPE(pipe, a, b) ((a) + (pipe)*((b)-(a)))
#define _PORT(port, a, b) ((a) + (port)*((b)-(a)))
/*
* The Bridge device's PCI config space has information about the
* fb aperture size and the amount of pre-reserved memory.
......@@ -301,6 +303,61 @@
#define DEBUG_RESET_RENDER (1<<8)
#define DEBUG_RESET_DISPLAY (1<<9)
/*
* DPIO - a special bus for various display related registers to hide behind:
* 0x800c: m1, m2, n, p1, p2, k dividers
* 0x8014: REF and SFR select
* 0x8014: N divider, VCO select
* 0x801c/3c: core clock bits
* 0x8048/68: low pass filter coefficients
* 0x8100: fast clock controls
*/
#define DPIO_PKT 0x2100
#define DPIO_RID (0<<24)
#define DPIO_OP_WRITE (1<<16)
#define DPIO_OP_READ (0<<16)
#define DPIO_PORTID (0x12<<8)
#define DPIO_BYTE (0xf<<4)
#define DPIO_BUSY (1<<0) /* status only */
#define DPIO_DATA 0x2104
#define DPIO_REG 0x2108
#define DPIO_CTL 0x2110
#define DPIO_MODSEL1 (1<<3) /* if ref clk b == 27 */
#define DPIO_MODSEL0 (1<<2) /* if ref clk a == 27 */
#define DPIO_SFR_BYPASS (1<<1)
#define DPIO_RESET (1<<0)
#define _DPIO_DIV_A 0x800c
#define DPIO_POST_DIV_SHIFT (28) /* 3 bits */
#define DPIO_K_SHIFT (24) /* 4 bits */
#define DPIO_P1_SHIFT (21) /* 3 bits */
#define DPIO_P2_SHIFT (16) /* 5 bits */
#define DPIO_N_SHIFT (12) /* 4 bits */
#define DPIO_ENABLE_CALIBRATION (1<<11)
#define DPIO_M1DIV_SHIFT (8) /* 3 bits */
#define DPIO_M2DIV_MASK 0xff
#define _DPIO_DIV_B 0x802c
#define DPIO_DIV(pipe) _PIPE(pipe, _DPIO_DIV_A, _DPIO_DIV_B)
#define _DPIO_REFSFR_A 0x8014
#define DPIO_REFSEL_OVERRIDE 27
#define DPIO_PLL_MODESEL_SHIFT 24 /* 3 bits */
#define DPIO_BIAS_CURRENT_CTL_SHIFT 21 /* 3 bits, always 0x7 */
#define DPIO_PLL_REFCLK_SEL_SHIFT 16 /* 2 bits */
#define DPIO_DRIVER_CTL_SHIFT 12 /* always set to 0x8 */
#define DPIO_CLK_BIAS_CTL_SHIFT 8 /* always set to 0x5 */
#define _DPIO_REFSFR_B 0x8034
#define DPIO_REFSFR(pipe) _PIPE(pipe, _DPIO_REFSFR_A, _DPIO_REFSFR_B)
#define _DPIO_CORE_CLK_A 0x801c
#define _DPIO_CORE_CLK_B 0x803c
#define DPIO_CORE_CLK(pipe) _PIPE(pipe, _DPIO_CORE_CLK_A, _DPIO_CORE_CLK_B)
#define _DPIO_LFP_COEFF_A 0x8048
#define _DPIO_LFP_COEFF_B 0x8068
#define DPIO_LFP_COEFF(pipe) _PIPE(pipe, _DPIO_LFP_COEFF_A, _DPIO_LFP_COEFF_B)
#define DPIO_FASTCLK_DISABLE 0x8100
/*
* Fence registers
......@@ -417,6 +474,7 @@
#define INSTDONE 0x02090
#define NOPID 0x02094
#define HWSTAM 0x02098
#define DMA_FADD_I8XX 0x020d0
#define ERROR_GEN6 0x040a0
......@@ -455,6 +513,11 @@
#define IIR 0x020a4
#define IMR 0x020a8
#define ISR 0x020ac
#define VLV_IIR_RW 0x182084
#define VLV_IER 0x1820a0
#define VLV_IIR 0x1820a4
#define VLV_IMR 0x1820a8
#define VLV_ISR 0x1820ac
#define I915_PIPE_CONTROL_NOTIFY_INTERRUPT (1<<18)
#define I915_DISPLAY_PORT_INTERRUPT (1<<17)
#define I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT (1<<15)
......@@ -578,7 +641,12 @@
#define ECO_GATING_CX_ONLY (1<<3)
#define ECO_FLIP_DONE (1<<0)
/* GEN6 interrupt control */
#define CACHE_MODE_1 0x7004 /* IVB+ */
#define PIXEL_SUBSPAN_COLLECT_OPT_DISABLE (1<<6)
/* GEN6 interrupt control
* Note that the per-ring interrupt bits do alias with the global interrupt bits
* in GTIMR. */
#define GEN6_RENDER_HWSTAM 0x2098
#define GEN6_RENDER_IMR 0x20a8
#define GEN6_RENDER_CONTEXT_SWITCH_INTERRUPT (1 << 8)
......@@ -742,9 +810,9 @@
#define GMBUS_PORT_PANEL 3
#define GMBUS_PORT_DPC 4 /* HDMIC */
#define GMBUS_PORT_DPB 5 /* SDVO, HDMIB */
/* 6 reserved */
#define GMBUS_PORT_DPD 7 /* HDMID */
#define GMBUS_NUM_PORTS 8
#define GMBUS_PORT_DPD 6 /* HDMID */
#define GMBUS_PORT_RESERVED 7 /* 7 reserved */
#define GMBUS_NUM_PORTS (GMBUS_PORT_DPD - GMBUS_PORT_SSC + 1)
#define GMBUS1 0x5104 /* command/status */
#define GMBUS_SW_CLR_INT (1<<31)
#define GMBUS_SW_RDY (1<<30)
......@@ -796,7 +864,9 @@
#define DPLL(pipe) _PIPE(pipe, _DPLL_A, _DPLL_B)
#define DPLL_VCO_ENABLE (1 << 31)
#define DPLL_DVO_HIGH_SPEED (1 << 30)
#define DPLL_EXT_BUFFER_ENABLE_VLV (1 << 30)
#define DPLL_SYNCLOCK_ENABLE (1 << 29)
#define DPLL_REFA_CLK_ENABLE_VLV (1 << 29)
#define DPLL_VGA_MODE_DIS (1 << 28)
#define DPLLB_MODE_DAC_SERIAL (1 << 26) /* i915 */
#define DPLLB_MODE_LVDS (2 << 26) /* i915 */
......@@ -808,6 +878,7 @@
#define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */
#define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */
#define DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW 0x00ff8000 /* Pineview */
#define DPLL_INTEGRATED_CLOCK_VLV (1<<13)
#define SRX_INDEX 0x3c4
#define SRX_DATA 0x3c5
......@@ -903,6 +974,7 @@
#define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0
#define _DPLL_B_MD 0x06020 /* 965+ only */
#define DPLL_MD(pipe) _PIPE(pipe, _DPLL_A_MD, _DPLL_B_MD)
#define _FPA0 0x06040
#define _FPA1 0x06044
#define _FPB0 0x06048
......@@ -1043,6 +1115,9 @@
#define RAMCLK_GATE_D 0x6210 /* CRL only */
#define DEUC 0x6214 /* CRL only */
#define FW_BLC_SELF_VLV 0x6500
#define FW_CSPWRDWNEN (1<<15)
/*
* Palette regs
*/
......@@ -2421,23 +2496,30 @@
#define PIPECONF_DITHER_TYPE_TEMP (3<<2)
#define _PIPEASTAT 0x70024
#define PIPE_FIFO_UNDERRUN_STATUS (1UL<<31)
#define SPRITE1_FLIPDONE_INT_EN_VLV (1UL<<30)
#define PIPE_CRC_ERROR_ENABLE (1UL<<29)
#define PIPE_CRC_DONE_ENABLE (1UL<<28)
#define PIPE_GMBUS_EVENT_ENABLE (1UL<<27)
#define PLANE_FLIP_DONE_INT_EN_VLV (1UL<<26)
#define PIPE_HOTPLUG_INTERRUPT_ENABLE (1UL<<26)
#define PIPE_VSYNC_INTERRUPT_ENABLE (1UL<<25)
#define PIPE_DISPLAY_LINE_COMPARE_ENABLE (1UL<<24)
#define PIPE_DPST_EVENT_ENABLE (1UL<<23)
#define SPRITE0_FLIP_DONE_INT_EN_VLV (1UL<<26)
#define PIPE_LEGACY_BLC_EVENT_ENABLE (1UL<<22)
#define PIPE_ODD_FIELD_INTERRUPT_ENABLE (1UL<<21)
#define PIPE_EVEN_FIELD_INTERRUPT_ENABLE (1UL<<20)
#define PIPE_HOTPLUG_TV_INTERRUPT_ENABLE (1UL<<18) /* pre-965 */
#define PIPE_START_VBLANK_INTERRUPT_ENABLE (1UL<<18) /* 965 or later */
#define PIPE_VBLANK_INTERRUPT_ENABLE (1UL<<17)
#define PIPEA_HBLANK_INT_EN_VLV (1UL<<16)
#define PIPE_OVERLAY_UPDATED_ENABLE (1UL<<16)
#define SPRITE1_FLIPDONE_INT_STATUS_VLV (1UL<<15)
#define SPRITE0_FLIPDONE_INT_STATUS_VLV (1UL<<15)
#define PIPE_CRC_ERROR_INTERRUPT_STATUS (1UL<<13)
#define PIPE_CRC_DONE_INTERRUPT_STATUS (1UL<<12)
#define PIPE_GMBUS_INTERRUPT_STATUS (1UL<<11)
#define PLANE_FLIPDONE_INT_STATUS_VLV (1UL<<10)
#define PIPE_HOTPLUG_INTERRUPT_STATUS (1UL<<10)
#define PIPE_VSYNC_INTERRUPT_STATUS (1UL<<9)
#define PIPE_DISPLAY_LINE_COMPARE_STATUS (1UL<<8)
......@@ -2462,6 +2544,40 @@
#define PIPEFRAMEPIXEL(pipe) _PIPE(pipe, _PIPEAFRAMEPIXEL, _PIPEBFRAMEPIXEL)
#define PIPESTAT(pipe) _PIPE(pipe, _PIPEASTAT, _PIPEBSTAT)
#define VLV_DPFLIPSTAT 0x70028
#define PIPEB_LINE_COMPARE_STATUS (1<<29)
#define PIPEB_HLINE_INT_EN (1<<28)
#define PIPEB_VBLANK_INT_EN (1<<27)
#define SPRITED_FLIPDONE_INT_EN (1<<26)
#define SPRITEC_FLIPDONE_INT_EN (1<<25)
#define PLANEB_FLIPDONE_INT_EN (1<<24)
#define PIPEA_LINE_COMPARE_STATUS (1<<21)
#define PIPEA_HLINE_INT_EN (1<<20)
#define PIPEA_VBLANK_INT_EN (1<<19)
#define SPRITEB_FLIPDONE_INT_EN (1<<18)
#define SPRITEA_FLIPDONE_INT_EN (1<<17)
#define PLANEA_FLIPDONE_INT_EN (1<<16)
#define DPINVGTT 0x7002c /* VLV only */
#define CURSORB_INVALID_GTT_INT_EN (1<<23)
#define CURSORA_INVALID_GTT_INT_EN (1<<22)
#define SPRITED_INVALID_GTT_INT_EN (1<<21)
#define SPRITEC_INVALID_GTT_INT_EN (1<<20)
#define PLANEB_INVALID_GTT_INT_EN (1<<19)
#define SPRITEB_INVALID_GTT_INT_EN (1<<18)
#define SPRITEA_INVALID_GTT_INT_EN (1<<17)
#define PLANEA_INVALID_GTT_INT_EN (1<<16)
#define DPINVGTT_EN_MASK 0xff0000
#define CURSORB_INVALID_GTT_STATUS (1<<7)
#define CURSORA_INVALID_GTT_STATUS (1<<6)
#define SPRITED_INVALID_GTT_STATUS (1<<5)
#define SPRITEC_INVALID_GTT_STATUS (1<<4)
#define PLANEB_INVALID_GTT_STATUS (1<<3)
#define SPRITEB_INVALID_GTT_STATUS (1<<2)
#define SPRITEA_INVALID_GTT_STATUS (1<<1)
#define PLANEA_INVALID_GTT_STATUS (1<<0)
#define DPINVGTT_STATUS_MASK 0xff
#define DSPARB 0x70030
#define DSPARB_CSTART_MASK (0x7f << 7)
#define DSPARB_CSTART_SHIFT 7
......@@ -2491,11 +2607,28 @@
#define DSPFW_HPLL_CURSOR_MASK (0x3f<<16)
#define DSPFW_HPLL_SR_MASK (0x1ff)
/* drain latency register values*/
#define DRAIN_LATENCY_PRECISION_32 32
#define DRAIN_LATENCY_PRECISION_16 16
#define VLV_DDL1 0x70050
#define DDL_CURSORA_PRECISION_32 (1<<31)
#define DDL_CURSORA_PRECISION_16 (0<<31)
#define DDL_CURSORA_SHIFT 24
#define DDL_PLANEA_PRECISION_32 (1<<7)
#define DDL_PLANEA_PRECISION_16 (0<<7)
#define VLV_DDL2 0x70054
#define DDL_CURSORB_PRECISION_32 (1<<31)
#define DDL_CURSORB_PRECISION_16 (0<<31)
#define DDL_CURSORB_SHIFT 24
#define DDL_PLANEB_PRECISION_32 (1<<7)
#define DDL_PLANEB_PRECISION_16 (0<<7)
/* FIFO watermark sizes etc */
#define G4X_FIFO_LINE_SIZE 64
#define I915_FIFO_LINE_SIZE 64
#define I830_FIFO_LINE_SIZE 32
#define VALLEYVIEW_FIFO_SIZE 255
#define G4X_FIFO_SIZE 127
#define I965_FIFO_SIZE 512
#define I945_FIFO_SIZE 127
......@@ -2503,6 +2636,7 @@
#define I855GM_FIFO_SIZE 127 /* In cachelines */
#define I830_FIFO_SIZE 95
#define VALLEYVIEW_MAX_WM 0xff
#define G4X_MAX_WM 0x3f
#define I915_MAX_WM 0x3f
......@@ -2517,6 +2651,7 @@
#define PINEVIEW_CURSOR_DFT_WM 0
#define PINEVIEW_CURSOR_GUARD_WM 5
#define VALLEYVIEW_CURSOR_MAX_WM 64
#define I965_CURSOR_FIFO 64
#define I965_CURSOR_MAX_WM 32
#define I965_CURSOR_DFT_WM 8
......@@ -3064,18 +3199,28 @@
#define DE_PIPEB_VBLANK_IVB (1<<5)
#define DE_PIPEA_VBLANK_IVB (1<<0)
#define VLV_MASTER_IER 0x4400c /* Gunit master IER */
#define MASTER_INTERRUPT_ENABLE (1<<31)
#define DEISR 0x44000
#define DEIMR 0x44004
#define DEIIR 0x44008
#define DEIER 0x4400c
/* GT interrupt */
#define GT_PIPE_NOTIFY (1 << 4)
#define GT_SYNC_STATUS (1 << 2)
#define GT_USER_INTERRUPT (1 << 0)
#define GT_BSD_USER_INTERRUPT (1 << 5)
#define GT_GEN6_BSD_USER_INTERRUPT (1 << 12)
#define GT_BLT_USER_INTERRUPT (1 << 22)
/* GT interrupt.
* Note that for gen6+ the ring-specific interrupt bits do alias with the
* corresponding bits in the per-ring interrupt control registers. */
#define GT_GEN6_BLT_FLUSHDW_NOTIFY_INTERRUPT (1 << 26)
#define GT_GEN6_BLT_CS_ERROR_INTERRUPT (1 << 25)
#define GT_GEN6_BLT_USER_INTERRUPT (1 << 22)
#define GT_GEN6_BSD_CS_ERROR_INTERRUPT (1 << 15)
#define GT_GEN6_BSD_USER_INTERRUPT (1 << 12)
#define GT_BSD_USER_INTERRUPT (1 << 5) /* ilk only */
#define GT_GEN7_L3_PARITY_ERROR_INTERRUPT (1 << 5)
#define GT_PIPE_NOTIFY (1 << 4)
#define GT_RENDER_CS_ERROR_INTERRUPT (1 << 3)
#define GT_SYNC_STATUS (1 << 2)
#define GT_USER_INTERRUPT (1 << 0)
#define GTISR 0x44010
#define GTIMR 0x44014
......@@ -3328,6 +3473,21 @@
#define TVIDEO_DIP_DATA(pipe) _PIPE(pipe, _VIDEO_DIP_DATA_A, _VIDEO_DIP_DATA_B)
#define TVIDEO_DIP_GCP(pipe) _PIPE(pipe, _VIDEO_DIP_GCP_A, _VIDEO_DIP_GCP_B)
#define VLV_VIDEO_DIP_CTL_A 0x60220
#define VLV_VIDEO_DIP_DATA_A 0x60208
#define VLV_VIDEO_DIP_GDCP_PAYLOAD_A 0x60210
#define VLV_VIDEO_DIP_CTL_B 0x61170
#define VLV_VIDEO_DIP_DATA_B 0x61174
#define VLV_VIDEO_DIP_GDCP_PAYLOAD_B 0x61178
#define VLV_TVIDEO_DIP_CTL(pipe) \
_PIPE(pipe, VLV_VIDEO_DIP_CTL_A, VLV_VIDEO_DIP_CTL_B)
#define VLV_TVIDEO_DIP_DATA(pipe) \
_PIPE(pipe, VLV_VIDEO_DIP_DATA_A, VLV_VIDEO_DIP_DATA_B)
#define VLV_TVIDEO_DIP_GCP(pipe) \
_PIPE(pipe, VLV_VIDEO_DIP_GDCP_PAYLOAD_A, VLV_VIDEO_DIP_GDCP_PAYLOAD_B)
#define _TRANS_HTOTAL_B 0xe1000
#define _TRANS_HBLANK_B 0xe1004
#define _TRANS_HSYNC_B 0xe1008
......@@ -3548,6 +3708,7 @@
#define ADPA_CRT_HOTPLUG_FORCE_TRIGGER (1<<16)
/* or SDVOB */
#define VLV_HDMIB 0x61140
#define HDMIB 0xe1140
#define PORT_ENABLE (1 << 31)
#define TRANSCODER(pipe) ((pipe) << 30)
......@@ -3713,6 +3874,8 @@
#define EDP_LINK_TRAIN_VOL_EMP_MASK_IVB (0x3f<<22)
#define FORCEWAKE 0xA18C
#define FORCEWAKE_VLV 0x1300b0
#define FORCEWAKE_ACK_VLV 0x1300b4
#define FORCEWAKE_ACK 0x130090
#define FORCEWAKE_MT 0xa188 /* multi-threaded */
#define FORCEWAKE_MT_ACK 0x130040
......@@ -3866,4 +4029,193 @@
#define AUD_CONFIG_PIXEL_CLOCK_HDMI (0xf << 16)
#define AUD_CONFIG_DISABLE_NCTS (1 << 3)
/* HSW Power Wells */
#define HSW_PWR_WELL_CTL1 0x45400 /* BIOS */
#define HSW_PWR_WELL_CTL2 0x45404 /* Driver */
#define HSW_PWR_WELL_CTL3 0x45408 /* KVMR */
#define HSW_PWR_WELL_CTL4 0x4540C /* Debug */
#define HSW_PWR_WELL_ENABLE (1<<31)
#define HSW_PWR_WELL_STATE (1<<30)
#define HSW_PWR_WELL_CTL5 0x45410
#define HSW_PWR_WELL_ENABLE_SINGLE_STEP (1<<31)
#define HSW_PWR_WELL_PWR_GATE_OVERRIDE (1<<20)
#define HSW_PWR_WELL_FORCE_ON (1<<19)
#define HSW_PWR_WELL_CTL6 0x45414
/* Per-pipe DDI Function Control */
#define PIPE_DDI_FUNC_CTL_A 0x60400
#define PIPE_DDI_FUNC_CTL_B 0x61400
#define PIPE_DDI_FUNC_CTL_C 0x62400
#define PIPE_DDI_FUNC_CTL_EDP 0x6F400
#define DDI_FUNC_CTL(pipe) _PIPE(pipe, \
PIPE_DDI_FUNC_CTL_A, \
PIPE_DDI_FUNC_CTL_B)
#define PIPE_DDI_FUNC_ENABLE (1<<31)
/* Those bits are ignored by pipe EDP since it can only connect to DDI A */
#define PIPE_DDI_PORT_MASK (0xf<<28)
#define PIPE_DDI_SELECT_PORT(x) ((x)<<28)
#define PIPE_DDI_MODE_SELECT_HDMI (0<<24)
#define PIPE_DDI_MODE_SELECT_DVI (1<<24)
#define PIPE_DDI_MODE_SELECT_DP_SST (2<<24)
#define PIPE_DDI_MODE_SELECT_DP_MST (3<<24)
#define PIPE_DDI_MODE_SELECT_FDI (4<<24)
#define PIPE_DDI_BPC_8 (0<<20)
#define PIPE_DDI_BPC_10 (1<<20)
#define PIPE_DDI_BPC_6 (2<<20)
#define PIPE_DDI_BPC_12 (3<<20)
#define PIPE_DDI_BFI_ENABLE (1<<4)
#define PIPE_DDI_PORT_WIDTH_X1 (0<<1)
#define PIPE_DDI_PORT_WIDTH_X2 (1<<1)
#define PIPE_DDI_PORT_WIDTH_X4 (3<<1)
/* DisplayPort Transport Control */
#define DP_TP_CTL_A 0x64040
#define DP_TP_CTL_B 0x64140
#define DP_TP_CTL(port) _PORT(port, \
DP_TP_CTL_A, \
DP_TP_CTL_B)
#define DP_TP_CTL_ENABLE (1<<31)
#define DP_TP_CTL_MODE_SST (0<<27)
#define DP_TP_CTL_MODE_MST (1<<27)
#define DP_TP_CTL_ENHANCED_FRAME_ENABLE (1<<18)
#define DP_TP_CTL_FDI_AUTOTRAIN (1<<15)
#define DP_TP_CTL_LINK_TRAIN_MASK (7<<8)
#define DP_TP_CTL_LINK_TRAIN_PAT1 (0<<8)
#define DP_TP_CTL_LINK_TRAIN_PAT2 (1<<8)
#define DP_TP_CTL_LINK_TRAIN_NORMAL (3<<8)
/* DisplayPort Transport Status */
#define DP_TP_STATUS_A 0x64044
#define DP_TP_STATUS_B 0x64144
#define DP_TP_STATUS(port) _PORT(port, \
DP_TP_STATUS_A, \
DP_TP_STATUS_B)
#define DP_TP_STATUS_AUTOTRAIN_DONE (1<<12)
/* DDI Buffer Control */
#define DDI_BUF_CTL_A 0x64000
#define DDI_BUF_CTL_B 0x64100
#define DDI_BUF_CTL(port) _PORT(port, \
DDI_BUF_CTL_A, \
DDI_BUF_CTL_B)
#define DDI_BUF_CTL_ENABLE (1<<31)
#define DDI_BUF_EMP_400MV_0DB_HSW (0<<24) /* Sel0 */
#define DDI_BUF_EMP_400MV_3_5DB_HSW (1<<24) /* Sel1 */
#define DDI_BUF_EMP_400MV_6DB_HSW (2<<24) /* Sel2 */
#define DDI_BUF_EMP_400MV_9_5DB_HSW (3<<24) /* Sel3 */
#define DDI_BUF_EMP_600MV_0DB_HSW (4<<24) /* Sel4 */
#define DDI_BUF_EMP_600MV_3_5DB_HSW (5<<24) /* Sel5 */
#define DDI_BUF_EMP_600MV_6DB_HSW (6<<24) /* Sel6 */
#define DDI_BUF_EMP_800MV_0DB_HSW (7<<24) /* Sel7 */
#define DDI_BUF_EMP_800MV_3_5DB_HSW (8<<24) /* Sel8 */
#define DDI_BUF_EMP_MASK (0xf<<24)
#define DDI_BUF_IS_IDLE (1<<7)
#define DDI_PORT_WIDTH_X1 (0<<1)
#define DDI_PORT_WIDTH_X2 (1<<1)
#define DDI_PORT_WIDTH_X4 (3<<1)
#define DDI_INIT_DISPLAY_DETECTED (1<<0)
/* DDI Buffer Translations */
#define DDI_BUF_TRANS_A 0x64E00
#define DDI_BUF_TRANS_B 0x64E60
#define DDI_BUF_TRANS(port) _PORT(port, \
DDI_BUF_TRANS_A, \
DDI_BUF_TRANS_B)
/* Sideband Interface (SBI) is programmed indirectly, via
* SBI_ADDR, which contains the register offset; and SBI_DATA,
* which contains the payload */
#define SBI_ADDR 0xC6000
#define SBI_DATA 0xC6004
#define SBI_CTL_STAT 0xC6008
#define SBI_CTL_OP_CRRD (0x6<<8)
#define SBI_CTL_OP_CRWR (0x7<<8)
#define SBI_RESPONSE_FAIL (0x1<<1)
#define SBI_RESPONSE_SUCCESS (0x0<<1)
#define SBI_BUSY (0x1<<0)
#define SBI_READY (0x0<<0)
/* SBI offsets */
#define SBI_SSCDIVINTPHASE6 0x0600
#define SBI_SSCDIVINTPHASE_DIVSEL_MASK ((0x7f)<<1)
#define SBI_SSCDIVINTPHASE_DIVSEL(x) ((x)<<1)
#define SBI_SSCDIVINTPHASE_INCVAL_MASK ((0x7f)<<8)
#define SBI_SSCDIVINTPHASE_INCVAL(x) ((x)<<8)
#define SBI_SSCDIVINTPHASE_DIR(x) ((x)<<15)
#define SBI_SSCDIVINTPHASE_PROPAGATE (1<<0)
#define SBI_SSCCTL 0x020c
#define SBI_SSCCTL6 0x060C
#define SBI_SSCCTL_DISABLE (1<<0)
#define SBI_SSCAUXDIV6 0x0610
#define SBI_SSCAUXDIV_FINALDIV2SEL(x) ((x)<<4)
#define SBI_DBUFF0 0x2a00
/* LPT PIXCLK_GATE */
#define PIXCLK_GATE 0xC6020
#define PIXCLK_GATE_UNGATE 1<<0
#define PIXCLK_GATE_GATE 0<<0
/* SPLL */
#define SPLL_CTL 0x46020
#define SPLL_PLL_ENABLE (1<<31)
#define SPLL_PLL_SCC (1<<28)
#define SPLL_PLL_NON_SCC (2<<28)
#define SPLL_PLL_FREQ_810MHz (0<<26)
#define SPLL_PLL_FREQ_1350MHz (1<<26)
/* WRPLL */
#define WRPLL_CTL1 0x46040
#define WRPLL_CTL2 0x46060
#define WRPLL_PLL_ENABLE (1<<31)
#define WRPLL_PLL_SELECT_SSC (0x01<<28)
#define WRPLL_PLL_SELECT_NON_SCC (0x02<<28)
#define WRPLL_PLL_SELECT_LCPLL_2700 (0x03<<28)
/* Port clock selection */
#define PORT_CLK_SEL_A 0x46100
#define PORT_CLK_SEL_B 0x46104
#define PORT_CLK_SEL(port) _PORT(port, \
PORT_CLK_SEL_A, \
PORT_CLK_SEL_B)
#define PORT_CLK_SEL_LCPLL_2700 (0<<29)
#define PORT_CLK_SEL_LCPLL_1350 (1<<29)
#define PORT_CLK_SEL_LCPLL_810 (2<<29)
#define PORT_CLK_SEL_SPLL (3<<29)
#define PORT_CLK_SEL_WRPLL1 (4<<29)
#define PORT_CLK_SEL_WRPLL2 (5<<29)
/* Pipe clock selection */
#define PIPE_CLK_SEL_A 0x46140
#define PIPE_CLK_SEL_B 0x46144
#define PIPE_CLK_SEL(pipe) _PIPE(pipe, \
PIPE_CLK_SEL_A, \
PIPE_CLK_SEL_B)
/* For each pipe, we need to select the corresponding port clock */
#define PIPE_CLK_SEL_DISABLED (0x0<<29)
#define PIPE_CLK_SEL_PORT(x) ((x+1)<<29)
/* LCPLL Control */
#define LCPLL_CTL 0x130040
#define LCPLL_PLL_DISABLE (1<<31)
#define LCPLL_PLL_LOCK (1<<30)
#define LCPLL_CD_CLOCK_DISABLE (1<<25)
#define LCPLL_CD2X_CLOCK_DISABLE (1<<23)
/* Pipe WM_LINETIME - watermark line time */
#define PIPE_WM_LINETIME_A 0x45270
#define PIPE_WM_LINETIME_B 0x45274
#define PIPE_WM_LINETIME(pipe) _PIPE(pipe, \
PIPE_WM_LINETIME_A, \
PIPE_WM_LINETIME_A)
#define PIPE_WM_LINETIME_MASK (0x1ff)
#define PIPE_WM_LINETIME_TIME(x) ((x))
#define PIPE_WM_LINETIME_IPS_LINETIME_MASK (0x1ff<<16)
#define PIPE_WM_LINETIME_IPS_LINETIME(x) ((x)<<16)
/* SFUSE_STRAP */
#define SFUSE_STRAP 0xc2014
#define SFUSE_STRAP_DDIB_DETECTED (1<<2)
#define SFUSE_STRAP_DDIC_DETECTED (1<<1)
#define SFUSE_STRAP_DDID_DETECTED (1<<0)
#endif /* _I915_REG_H_ */
drivers/gpu/drm/i915/intel_acpi.c
浏览文件 @ effbc4fd
......@@ -182,8 +182,6 @@ static void intel_dsm_platform_mux_info(void)
DRM_DEBUG_DRIVER(" hpd mux info: %s\n",
intel_dsm_mux_type(info->buffer.pointer[3]));
}
} else {
DRM_ERROR("MUX INFO call failed\n");
}
out:
......
drivers/gpu/drm/i915/intel_bios.c
浏览文件 @ effbc4fd
......@@ -174,6 +174,28 @@ get_lvds_dvo_timing(const struct bdb_lvds_lfp_data *lvds_lfp_data,
return (struct lvds_dvo_timing *)(entry + dvo_timing_offset);
}
/* get lvds_fp_timing entry
* this function may return NULL if the corresponding entry is invalid
*/
static const struct lvds_fp_timing *
get_lvds_fp_timing(const struct bdb_header *bdb,
const struct bdb_lvds_lfp_data *data,
const struct bdb_lvds_lfp_data_ptrs *ptrs,
int index)
{
size_t data_ofs = (const u8 *)data - (const u8 *)bdb;
u16 data_size = ((const u16 *)data)[-1]; /* stored in header */
size_t ofs;
if (index >= ARRAY_SIZE(ptrs->ptr))
return NULL;
ofs = ptrs->ptr[index].fp_timing_offset;
if (ofs < data_ofs ||
ofs + sizeof(struct lvds_fp_timing) > data_ofs + data_size)
return NULL;
return (const struct lvds_fp_timing *)((const u8 *)bdb + ofs);
}
/* Try to find integrated panel data */
static void
parse_lfp_panel_data(struct drm_i915_private *dev_priv,
......@@ -183,6 +205,7 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv,
const struct bdb_lvds_lfp_data *lvds_lfp_data;
const struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs;
const struct lvds_dvo_timing *panel_dvo_timing;
const struct lvds_fp_timing *fp_timing;
struct drm_display_mode *panel_fixed_mode;
int i, downclock;
......@@ -244,6 +267,19 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv,
"Normal Clock %dKHz, downclock %dKHz\n",
panel_fixed_mode->clock, 10*downclock);
}
fp_timing = get_lvds_fp_timing(bdb, lvds_lfp_data,
lvds_lfp_data_ptrs,
lvds_options->panel_type);
if (fp_timing) {
/* check the resolution, just to be sure */
if (fp_timing->x_res == panel_fixed_mode->hdisplay &&
fp_timing->y_res == panel_fixed_mode->vdisplay) {
dev_priv->bios_lvds_val = fp_timing->lvds_reg_val;
DRM_DEBUG_KMS("VBT initial LVDS value %x\n",
dev_priv->bios_lvds_val);
}
}
}
/* Try to find sdvo panel data */
......@@ -256,6 +292,11 @@ parse_sdvo_panel_data(struct drm_i915_private *dev_priv,
int index;
index = i915_vbt_sdvo_panel_type;
if (index == -2) {
DRM_DEBUG_KMS("Ignore SDVO panel mode from BIOS VBT tables.\n");
return;
}
if (index == -1) {
struct bdb_sdvo_lvds_options *sdvo_lvds_options;
......@@ -332,11 +373,11 @@ parse_general_definitions(struct drm_i915_private *dev_priv,
if (block_size >= sizeof(*general)) {
int bus_pin = general->crt_ddc_gmbus_pin;
DRM_DEBUG_KMS("crt_ddc_bus_pin: %d\n", bus_pin);
if (bus_pin >= 1 && bus_pin <= 6)
if (intel_gmbus_is_port_valid(bus_pin))
dev_priv->crt_ddc_pin = bus_pin;
} else {
DRM_DEBUG_KMS("BDB_GD too small (%d). Invalid.\n",
block_size);
block_size);
}
}
}
......
drivers/gpu/drm/i915/intel_crt.c
浏览文件 @ effbc4fd
......@@ -278,9 +278,10 @@ static bool intel_crt_detect_ddc(struct drm_connector *connector)
if (intel_ddc_probe(&crt->base, dev_priv->crt_ddc_pin)) {
struct edid *edid;
bool is_digital = false;
struct i2c_adapter *i2c;
edid = drm_get_edid(connector,
&dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->crt_ddc_pin);
edid = drm_get_edid(connector, i2c);
/*
* This may be a DVI-I connector with a shared DDC
* link between analog and digital outputs, so we
......@@ -483,15 +484,16 @@ static int intel_crt_get_modes(struct drm_connector *connector)
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
struct i2c_adapter *i2c;
ret = intel_ddc_get_modes(connector,
&dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->crt_ddc_pin);
ret = intel_ddc_get_modes(connector, i2c);
if (ret || !IS_G4X(dev))
return ret;
/* Try to probe digital port for output in DVI-I -> VGA mode. */
return intel_ddc_get_modes(connector,
&dev_priv->gmbus[GMBUS_PORT_DPB].adapter);
i2c = intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPB);
return intel_ddc_get_modes(connector, i2c);
}
static int intel_crt_set_property(struct drm_connector *connector,
......@@ -543,7 +545,7 @@ static const struct drm_encoder_funcs intel_crt_enc_funcs = {
static int __init intel_no_crt_dmi_callback(const struct dmi_system_id *id)
{
DRM_DEBUG_KMS("Skipping CRT initialization for %s\n", id->ident);
DRM_INFO("Skipping CRT initialization for %s\n", id->ident);
return 1;
}
......
drivers/gpu/drm/i915/intel_drv.h
浏览文件 @ effbc4fd
......@@ -45,6 +45,18 @@
ret__; \
})
#define wait_for_atomic_us(COND, US) ({ \
int i, ret__ = -ETIMEDOUT; \
for (i = 0; i < (US); i++) { \
if ((COND)) { \
ret__ = 0; \
break; \
} \
udelay(1); \
} \
ret__; \
})
#define wait_for(COND, MS) _wait_for(COND, MS, 1)
#define wait_for_atomic(COND, MS) _wait_for(COND, MS, 0)
......@@ -293,7 +305,8 @@ extern void intel_attach_broadcast_rgb_property(struct drm_connector *connector)
extern void intel_crt_init(struct drm_device *dev);
extern void intel_hdmi_init(struct drm_device *dev, int sdvox_reg);
void intel_dip_infoframe_csum(struct dip_infoframe *avi_if);
extern bool intel_sdvo_init(struct drm_device *dev, int output_device);
extern bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg,
bool is_sdvob);
extern void intel_dvo_init(struct drm_device *dev);
extern void intel_tv_init(struct drm_device *dev);
extern void intel_mark_busy(struct drm_device *dev,
......@@ -419,4 +432,6 @@ extern int intel_sprite_set_colorkey(struct drm_device *dev, void *data,
extern int intel_sprite_get_colorkey(struct drm_device *dev, void *data,
struct drm_file *file_priv);
extern u32 intel_dpio_read(struct drm_i915_private *dev_priv, int reg);
#endif /* __INTEL_DRV_H__ */
drivers/gpu/drm/i915/intel_dvo.c
浏览文件 @ effbc4fd
......@@ -243,7 +243,7 @@ static int intel_dvo_get_modes(struct drm_connector *connector)
* that's not the case.
*/
intel_ddc_get_modes(connector,
&dev_priv->gmbus[GMBUS_PORT_DPC].adapter);
intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPC));
if (!list_empty(&connector->probed_modes))
return 1;
......@@ -375,7 +375,7 @@ void intel_dvo_init(struct drm_device *dev)
* special cases, but otherwise default to what's defined
* in the spec.
*/
if (dvo->gpio != 0)
if (intel_gmbus_is_port_valid(dvo->gpio))
gpio = dvo->gpio;
else if (dvo->type == INTEL_DVO_CHIP_LVDS)
gpio = GMBUS_PORT_SSC;
......@@ -386,7 +386,7 @@ void intel_dvo_init(struct drm_device *dev)
* It appears that everything is on GPIOE except for panels
* on i830 laptops, which are on GPIOB (DVOA).
*/
i2c = &dev_priv->gmbus[gpio].adapter;
i2c = intel_gmbus_get_adapter(dev_priv, gpio);
intel_dvo->dev = *dvo;
if (!dvo->dev_ops->init(&intel_dvo->dev, i2c))
......
drivers/gpu/drm/i915/intel_hdmi.c
浏览文件 @ effbc4fd
......@@ -177,6 +177,37 @@ static void ironlake_write_infoframe(struct drm_encoder *encoder,
I915_WRITE(reg, VIDEO_DIP_ENABLE | val | flags);
}
static void vlv_write_infoframe(struct drm_encoder *encoder,
struct dip_infoframe *frame)
{
uint32_t *data = (uint32_t *)frame;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc = encoder->crtc;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int reg = VLV_TVIDEO_DIP_CTL(intel_crtc->pipe);
unsigned i, len = DIP_HEADER_SIZE + frame->len;
u32 flags, val = I915_READ(reg);
intel_wait_for_vblank(dev, intel_crtc->pipe);
flags = intel_infoframe_index(frame);
val &= ~(VIDEO_DIP_SELECT_MASK | 0xf); /* clear DIP data offset */
I915_WRITE(reg, VIDEO_DIP_ENABLE | val | flags);
for (i = 0; i < len; i += 4) {
I915_WRITE(VLV_TVIDEO_DIP_DATA(intel_crtc->pipe), *data);
data++;
}
flags |= intel_infoframe_flags(frame);
I915_WRITE(reg, VIDEO_DIP_ENABLE | val | flags);
}
static void intel_set_infoframe(struct drm_encoder *encoder,
struct dip_infoframe *frame)
{
......@@ -334,7 +365,8 @@ intel_hdmi_detect(struct drm_connector *connector, bool force)
intel_hdmi->has_hdmi_sink = false;
intel_hdmi->has_audio = false;
edid = drm_get_edid(connector,
&dev_priv->gmbus[intel_hdmi->ddc_bus].adapter);
intel_gmbus_get_adapter(dev_priv,
intel_hdmi->ddc_bus));
if (edid) {
if (edid->input & DRM_EDID_INPUT_DIGITAL) {
......@@ -367,7 +399,8 @@ static int intel_hdmi_get_modes(struct drm_connector *connector)
*/
return intel_ddc_get_modes(connector,
&dev_priv->gmbus[intel_hdmi->ddc_bus].adapter);
intel_gmbus_get_adapter(dev_priv,
intel_hdmi->ddc_bus));
}
static bool
......@@ -379,7 +412,8 @@ intel_hdmi_detect_audio(struct drm_connector *connector)
bool has_audio = false;
edid = drm_get_edid(connector,
&dev_priv->gmbus[intel_hdmi->ddc_bus].adapter);
intel_gmbus_get_adapter(dev_priv,
intel_hdmi->ddc_bus));
if (edid) {
if (edid->input & DRM_EDID_INPUT_DIGITAL)
has_audio = drm_detect_monitor_audio(edid);
......@@ -549,7 +583,11 @@ void intel_hdmi_init(struct drm_device *dev, int sdvox_reg)
if (!HAS_PCH_SPLIT(dev)) {
intel_hdmi->write_infoframe = i9xx_write_infoframe;
I915_WRITE(VIDEO_DIP_CTL, 0);
} else {
} else if (IS_VALLEYVIEW(dev)) {
intel_hdmi->write_infoframe = vlv_write_infoframe;
for_each_pipe(i)
I915_WRITE(VLV_TVIDEO_DIP_CTL(i), 0);
} else {
intel_hdmi->write_infoframe = ironlake_write_infoframe;
for_each_pipe(i)
I915_WRITE(TVIDEO_DIP_CTL(i), 0);
......
drivers/gpu/drm/i915/intel_i2c.c
浏览文件 @ effbc4fd
......@@ -35,6 +35,20 @@
#include "i915_drm.h"
#include "i915_drv.h"
struct gmbus_port {
const char *name;
int reg;
};
static const struct gmbus_port gmbus_ports[] = {
{ "ssc", GPIOB },
{ "vga", GPIOA },
{ "panel", GPIOC },
{ "dpc", GPIOD },
{ "dpb", GPIOE },
{ "dpd", GPIOF },
};
/* Intel GPIO access functions */
#define I2C_RISEFALL_TIME 10
......@@ -49,10 +63,7 @@ void
intel_i2c_reset(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (HAS_PCH_SPLIT(dev))
I915_WRITE(PCH_GMBUS0, 0);
else
I915_WRITE(GMBUS0, 0);
I915_WRITE(dev_priv->gpio_mmio_base + GMBUS0, 0);
}
static void intel_i2c_quirk_set(struct drm_i915_private *dev_priv, bool enable)
......@@ -140,65 +151,132 @@ static void set_data(void *data, int state_high)
POSTING_READ(bus->gpio_reg);
}
static bool
static int
intel_gpio_pre_xfer(struct i2c_adapter *adapter)
{
struct intel_gmbus *bus = container_of(adapter,
struct intel_gmbus,
adapter);
struct drm_i915_private *dev_priv = bus->dev_priv;
intel_i2c_reset(dev_priv->dev);
intel_i2c_quirk_set(dev_priv, true);
set_data(bus, 1);
set_clock(bus, 1);
udelay(I2C_RISEFALL_TIME);
return 0;
}
static void
intel_gpio_post_xfer(struct i2c_adapter *adapter)
{
struct intel_gmbus *bus = container_of(adapter,
struct intel_gmbus,
adapter);
struct drm_i915_private *dev_priv = bus->dev_priv;
set_data(bus, 1);
set_clock(bus, 1);
intel_i2c_quirk_set(dev_priv, false);
}
static void
intel_gpio_setup(struct intel_gmbus *bus, u32 pin)
{
struct drm_i915_private *dev_priv = bus->dev_priv;
static const int map_pin_to_reg[] = {
0,
GPIOB,
GPIOA,
GPIOC,
GPIOD,
GPIOE,
0,
GPIOF,
};
struct i2c_algo_bit_data *algo;
if (pin >= ARRAY_SIZE(map_pin_to_reg) || !map_pin_to_reg[pin])
return false;
algo = &bus->bit_algo;
bus->gpio_reg = map_pin_to_reg[pin];
if (HAS_PCH_SPLIT(dev_priv->dev))
bus->gpio_reg += PCH_GPIOA - GPIOA;
/* -1 to map pin pair to gmbus index */
bus->gpio_reg = dev_priv->gpio_mmio_base + gmbus_ports[pin - 1].reg;
bus->adapter.algo_data = algo;
algo->setsda = set_data;
algo->setscl = set_clock;
algo->getsda = get_data;
algo->getscl = get_clock;
algo->pre_xfer = intel_gpio_pre_xfer;
algo->post_xfer = intel_gpio_post_xfer;
algo->udelay = I2C_RISEFALL_TIME;
algo->timeout = usecs_to_jiffies(2200);
algo->data = bus;
return true;
}
static int
intel_i2c_quirk_xfer(struct intel_gmbus *bus,
struct i2c_msg *msgs,
int num)
gmbus_xfer_read(struct drm_i915_private *dev_priv, struct i2c_msg *msg,
bool last)
{
struct drm_i915_private *dev_priv = bus->dev_priv;
int ret;
int reg_offset = dev_priv->gpio_mmio_base;
u16 len = msg->len;
u8 *buf = msg->buf;
I915_WRITE(GMBUS1 + reg_offset,
GMBUS_CYCLE_WAIT |
(last ? GMBUS_CYCLE_STOP : 0) |
(len << GMBUS_BYTE_COUNT_SHIFT) |
(msg->addr << GMBUS_SLAVE_ADDR_SHIFT) |
GMBUS_SLAVE_READ | GMBUS_SW_RDY);
POSTING_READ(GMBUS2 + reg_offset);
do {
u32 val, loop = 0;
if (wait_for(I915_READ(GMBUS2 + reg_offset) &
(GMBUS_SATOER | GMBUS_HW_RDY),
50))
return -ETIMEDOUT;
if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
return -ENXIO;
intel_i2c_reset(dev_priv->dev);
val = I915_READ(GMBUS3 + reg_offset);
do {
*buf++ = val & 0xff;
val >>= 8;
} while (--len && ++loop < 4);
} while (len);
intel_i2c_quirk_set(dev_priv, true);
set_data(bus, 1);
set_clock(bus, 1);
udelay(I2C_RISEFALL_TIME);
return 0;
}
ret = i2c_bit_algo.master_xfer(&bus->adapter, msgs, num);
static int
gmbus_xfer_write(struct drm_i915_private *dev_priv, struct i2c_msg *msg,
bool last)
{
int reg_offset = dev_priv->gpio_mmio_base;
u16 len = msg->len;
u8 *buf = msg->buf;
u32 val, loop;
val = loop = 0;
do {
val |= *buf++ << (8 * loop);
} while (--len && ++loop < 4);
I915_WRITE(GMBUS3 + reg_offset, val);
I915_WRITE(GMBUS1 + reg_offset,
GMBUS_CYCLE_WAIT |
(last ? GMBUS_CYCLE_STOP : 0) |
(msg->len << GMBUS_BYTE_COUNT_SHIFT) |
(msg->addr << GMBUS_SLAVE_ADDR_SHIFT) |
GMBUS_SLAVE_WRITE | GMBUS_SW_RDY);
POSTING_READ(GMBUS2 + reg_offset);
while (len) {
if (wait_for(I915_READ(GMBUS2 + reg_offset) &
(GMBUS_SATOER | GMBUS_HW_RDY),
50))
return -ETIMEDOUT;
if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
return -ENXIO;
set_data(bus, 1);
set_clock(bus, 1);
intel_i2c_quirk_set(dev_priv, false);
val = loop = 0;
do {
val |= *buf++ << (8 * loop);
} while (--len && ++loop < 4);
return ret;
I915_WRITE(GMBUS3 + reg_offset, val);
POSTING_READ(GMBUS2 + reg_offset);
}
return 0;
}
static int
......@@ -215,74 +293,31 @@ gmbus_xfer(struct i2c_adapter *adapter,
mutex_lock(&dev_priv->gmbus_mutex);
if (bus->force_bit) {
ret = intel_i2c_quirk_xfer(bus, msgs, num);
ret = i2c_bit_algo.master_xfer(adapter, msgs, num);
goto out;
}
reg_offset = HAS_PCH_SPLIT(dev_priv->dev) ? PCH_GMBUS0 - GMBUS0 : 0;
reg_offset = dev_priv->gpio_mmio_base;
I915_WRITE(GMBUS0 + reg_offset, bus->reg0);
for (i = 0; i < num; i++) {
u16 len = msgs[i].len;
u8 *buf = msgs[i].buf;
if (msgs[i].flags & I2C_M_RD) {
I915_WRITE(GMBUS1 + reg_offset,
GMBUS_CYCLE_WAIT |
(i + 1 == num ? GMBUS_CYCLE_STOP : 0) |
(len << GMBUS_BYTE_COUNT_SHIFT) |
(msgs[i].addr << GMBUS_SLAVE_ADDR_SHIFT) |
GMBUS_SLAVE_READ | GMBUS_SW_RDY);
POSTING_READ(GMBUS2+reg_offset);
do {
u32 val, loop = 0;
if (wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_RDY), 50))
goto timeout;
if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
goto clear_err;
val = I915_READ(GMBUS3 + reg_offset);
do {
*buf++ = val & 0xff;
val >>= 8;
} while (--len && ++loop < 4);
} while (len);
} else {
u32 val, loop;
val = loop = 0;
do {
val |= *buf++ << (8 * loop);
} while (--len && ++loop < 4);
I915_WRITE(GMBUS3 + reg_offset, val);
I915_WRITE(GMBUS1 + reg_offset,
GMBUS_CYCLE_WAIT |
(i + 1 == num ? GMBUS_CYCLE_STOP : 0) |
(msgs[i].len << GMBUS_BYTE_COUNT_SHIFT) |
(msgs[i].addr << GMBUS_SLAVE_ADDR_SHIFT) |
GMBUS_SLAVE_WRITE | GMBUS_SW_RDY);
POSTING_READ(GMBUS2+reg_offset);
while (len) {
if (wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_RDY), 50))
goto timeout;
if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
goto clear_err;
val = loop = 0;
do {
val |= *buf++ << (8 * loop);
} while (--len && ++loop < 4);
I915_WRITE(GMBUS3 + reg_offset, val);
POSTING_READ(GMBUS2+reg_offset);
}
}
if (i + 1 < num && wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_WAIT_PHASE), 50))
bool last = i + 1 == num;
if (msgs[i].flags & I2C_M_RD)
ret = gmbus_xfer_read(dev_priv, &msgs[i], last);
else
ret = gmbus_xfer_write(dev_priv, &msgs[i], last);
if (ret == -ETIMEDOUT)
goto timeout;
if (ret == -ENXIO)
goto clear_err;
if (!last &&
wait_for(I915_READ(GMBUS2 + reg_offset) &
(GMBUS_SATOER | GMBUS_HW_WAIT_PHASE),
50))
goto timeout;
if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
goto clear_err;
......@@ -304,23 +339,21 @@ gmbus_xfer(struct i2c_adapter *adapter,
* till then let it sleep.
*/
if (wait_for((I915_READ(GMBUS2 + reg_offset) & GMBUS_ACTIVE) == 0, 10))
DRM_INFO("GMBUS timed out waiting for idle\n");
DRM_INFO("GMBUS [%s] timed out waiting for idle\n",
bus->adapter.name);
I915_WRITE(GMBUS0 + reg_offset, 0);
ret = i;
goto out;
timeout:
DRM_INFO("GMBUS timed out, falling back to bit banging on pin %d [%s]\n",
bus->reg0 & 0xff, bus->adapter.name);
DRM_INFO("GMBUS [%s] timed out, falling back to bit banging on pin %d\n",
bus->adapter.name, bus->reg0 & 0xff);
I915_WRITE(GMBUS0 + reg_offset, 0);
/* Hardware may not support GMBUS over these pins? Try GPIO bitbanging instead. */
if (!bus->has_gpio) {
ret = -EIO;
} else {
bus->force_bit = true;
ret = intel_i2c_quirk_xfer(bus, msgs, num);
}
bus->force_bit = true;
ret = i2c_bit_algo.master_xfer(adapter, msgs, num);
out:
mutex_unlock(&dev_priv->gmbus_mutex);
return ret;
......@@ -346,35 +379,26 @@ static const struct i2c_algorithm gmbus_algorithm = {
*/
int intel_setup_gmbus(struct drm_device *dev)
{
static const char *names[GMBUS_NUM_PORTS] = {
"disabled",
"ssc",
"vga",
"panel",
"dpc",
"dpb",
"reserved",
"dpd",
};
struct drm_i915_private *dev_priv = dev->dev_private;
int ret, i;
dev_priv->gmbus = kcalloc(GMBUS_NUM_PORTS, sizeof(struct intel_gmbus),
GFP_KERNEL);
if (dev_priv->gmbus == NULL)
return -ENOMEM;
if (HAS_PCH_SPLIT(dev))
dev_priv->gpio_mmio_base = PCH_GPIOA - GPIOA;
else
dev_priv->gpio_mmio_base = 0;
mutex_init(&dev_priv->gmbus_mutex);
for (i = 0; i < GMBUS_NUM_PORTS; i++) {
struct intel_gmbus *bus = &dev_priv->gmbus[i];
u32 port = i + 1; /* +1 to map gmbus index to pin pair */
bus->adapter.owner = THIS_MODULE;
bus->adapter.class = I2C_CLASS_DDC;
snprintf(bus->adapter.name,
sizeof(bus->adapter.name),
"i915 gmbus %s",
names[i]);
gmbus_ports[i].name);
bus->adapter.dev.parent = &dev->pdev->dev;
bus->dev_priv = dev_priv;
......@@ -385,13 +409,9 @@ int intel_setup_gmbus(struct drm_device *dev)
goto err;
/* By default use a conservative clock rate */
bus->reg0 = i | GMBUS_RATE_100KHZ;
bus->has_gpio = intel_gpio_setup(bus, i);
bus->reg0 = port | GMBUS_RATE_100KHZ;
/* XXX force bit banging until GMBUS is fully debugged */
if (bus->has_gpio && IS_GEN2(dev))
bus->force_bit = true;
intel_gpio_setup(bus, port);
}
intel_i2c_reset(dev_priv->dev);
......@@ -403,11 +423,18 @@ int intel_setup_gmbus(struct drm_device *dev)
struct intel_gmbus *bus = &dev_priv->gmbus[i];
i2c_del_adapter(&bus->adapter);
}
kfree(dev_priv->gmbus);
dev_priv->gmbus = NULL;
return ret;
}
struct i2c_adapter *intel_gmbus_get_adapter(struct drm_i915_private *dev_priv,
unsigned port)
{
WARN_ON(!intel_gmbus_is_port_valid(port));
/* -1 to map pin pair to gmbus index */
return (intel_gmbus_is_port_valid(port)) ?
&dev_priv->gmbus[port - 1].adapter : NULL;
}
void intel_gmbus_set_speed(struct i2c_adapter *adapter, int speed)
{
struct intel_gmbus *bus = to_intel_gmbus(adapter);
......@@ -419,8 +446,7 @@ void intel_gmbus_force_bit(struct i2c_adapter *adapter, bool force_bit)
{
struct intel_gmbus *bus = to_intel_gmbus(adapter);
if (bus->has_gpio)
bus->force_bit = force_bit;
bus->force_bit = force_bit;
}
void intel_teardown_gmbus(struct drm_device *dev)
......@@ -435,7 +461,4 @@ void intel_teardown_gmbus(struct drm_device *dev)
struct intel_gmbus *bus = &dev_priv->gmbus[i];
i2c_del_adapter(&bus->adapter);
}
kfree(dev_priv->gmbus);
dev_priv->gmbus = NULL;
}
drivers/gpu/drm/i915/intel_lvds.c
浏览文件 @ effbc4fd
......@@ -474,7 +474,7 @@ static int intel_lvds_get_modes(struct drm_connector *connector)
static int intel_no_modeset_on_lid_dmi_callback(const struct dmi_system_id *id)
{
DRM_DEBUG_KMS("Skipping forced modeset for %s\n", id->ident);
DRM_INFO("Skipping forced modeset for %s\n", id->ident);
return 1;
}
......@@ -622,7 +622,7 @@ static const struct drm_encoder_funcs intel_lvds_enc_funcs = {
static int __init intel_no_lvds_dmi_callback(const struct dmi_system_id *id)
{
DRM_DEBUG_KMS("Skipping LVDS initialization for %s\n", id->ident);
DRM_INFO("Skipping LVDS initialization for %s\n", id->ident);
return 1;
}
......@@ -845,8 +845,8 @@ static bool lvds_is_present_in_vbt(struct drm_device *dev,
child->device_type != DEVICE_TYPE_LFP)
continue;
if (child->i2c_pin)
*i2c_pin = child->i2c_pin;
if (intel_gmbus_is_port_valid(child->i2c_pin))
*i2c_pin = child->i2c_pin;
/* However, we cannot trust the BIOS writers to populate
* the VBT correctly. Since LVDS requires additional
......@@ -987,7 +987,8 @@ bool intel_lvds_init(struct drm_device *dev)
* preferred mode is the right one.
*/
intel_lvds->edid = drm_get_edid(connector,
&dev_priv->gmbus[pin].adapter);
intel_gmbus_get_adapter(dev_priv,
pin));
if (intel_lvds->edid) {
if (drm_add_edid_modes(connector,
intel_lvds->edid)) {
......
drivers/gpu/drm/i915/intel_modes.c
浏览文件 @ effbc4fd
......@@ -56,7 +56,8 @@ bool intel_ddc_probe(struct intel_encoder *intel_encoder, int ddc_bus)
}
};
return i2c_transfer(&dev_priv->gmbus[ddc_bus].adapter, msgs, 2) == 2;
return i2c_transfer(intel_gmbus_get_adapter(dev_priv, ddc_bus),
msgs, 2) == 2;
}
/**
......
drivers/gpu/drm/i915/intel_opregion.c
浏览文件 @ effbc4fd
......@@ -25,6 +25,8 @@
*
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/acpi.h>
#include <linux/acpi_io.h>
#include <acpi/video.h>
......@@ -355,7 +357,7 @@ static void intel_didl_outputs(struct drm_device *dev)
}
if (!acpi_video_bus) {
printk(KERN_WARNING "No ACPI video bus found\n");
pr_warn("No ACPI video bus found\n");
return;
}
......
drivers/gpu/drm/i915/intel_panel.c
浏览文件 @ effbc4fd
此差异已折叠。
drivers/gpu/drm/i915/intel_sdvo.c
浏览文件 @ effbc4fd
此差异已折叠。
drivers/gpu/drm/i915/intel_tv.c
浏览文件 @ effbc4fd
此差异已折叠。
include/drm/drmP.h
浏览文件 @ effbc4fd
此差异已折叠。
include/drm/i915_drm.h
浏览文件 @ effbc4fd
此差异已折叠。
include/linux/pagemap.h
浏览文件 @ effbc4fd
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或