ARM: dts: socfpga: Add a 3.3V fixed regulator node

Without the 3.3V regulator node, the SDMMC driver will give these warnings:

dw_mmc ff704000.dwmmc0: No vmmc regulator found
dw_mmc ff704000.dwmmc0: No vqmmc regulator found

This patch adds the regulator node, and points the SD/MMC to the regulator.
Signed-off-by: NDinh Nguyen <dinguyen@opensource.altera.com>
Reviewed-by: NDoug Anderson <dianders@chromium.org>
---
v3: Rename nodes to have schematic-name_regulator and remove "boot-on" and
    "always-on"
v2: Move the regulator nodes to their respective board dts file and
    correctly rename them to match the schematic

arch/arm/boot/dts/socfpga_arria5.dtsi

@@ -29,7 +29,7 @@
 			};
 		};
 
-		dwmmc0@ff704000 {
+		mmc0: dwmmc0@ff704000 {
 			num-slots = <1>;
 			broken-cd;
 			bus-width = <4>;

arch/arm/boot/dts/socfpga_arria5_socdk.dts

@@ -37,6 +37,13 @@
 		*/
 		ethernet0 = &gmac1;
 	};
+
+	regulator_3_3v: 3-3-v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 };
 
 &gmac1 {
@@ -68,6 +75,11 @@
 	};
 };
 
+&mmc0 {
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+};
+
 &usb1 {
 	status = "okay";
 };

arch/arm/boot/dts/socfpga_cyclone5_socdk.dts

@@ -37,6 +37,13 @@
 		 */
 		ethernet0 = &gmac1;
 	};
+
+	regulator_3_3v: 3-3-v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 };
 
 &gmac1 {
@@ -74,6 +81,8 @@
 
 &mmc0 {
 	cd-gpios = <&portb 18 0>;
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
 };
 
 &usb1 {

arch/arm/boot/dts/socfpga_cyclone5_sockit.dts

@@ -37,6 +37,13 @@
 		 */
 		ethernet0 = &gmac1;
 	};
+
+	regulator_3_3v: vcc3p3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 };
 
 &gmac1 {
@@ -53,6 +60,11 @@
 	rxc-skew-ps = <2000>;
 };
 
+&mmc0 {
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+};
+
 &usb1 {
 	status = "okay";
 };