提交 ef53a115 编写于 作者: M Mauro Carvalho Chehab

V4L/DVB (13532): ir-common: Add infrastructure to use a dynamic keycode table

V4L drivers use an static keycode vector with 128 entries, where the scancode
indexes the keycode. While this works, it limits the scancodes to have only
7 bits, not allowing for example full RC5 codes.

Instead of implementing the same code on every V4L driver, provide a common
infrastructure to handle the bigger tables, minimizing the changes inside
each driver.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 4e89217b
saa7146-objs := saa7146_i2c.o saa7146_core.o
saa7146_vv-objs := saa7146_fops.o saa7146_video.o saa7146_hlp.o saa7146_vbi.o
ir-common-objs := ir-functions.o ir-keymaps.o
ir-common-objs := ir-functions.o ir-keymaps.o ir-keytable.o
obj-y += tuners/
obj-$(CONFIG_VIDEO_SAA7146) += saa7146.o
......
/* ir-register.c - handle IR scancode->keycode tables
*
* Copyright (C) 2009 by Mauro Carvalho Chehab <mchehab@redhat.com>
*/
#include <linux/usb/input.h>
#include <media/ir-common.h>
/**
* ir_getkeycode() - get a keycode at the evdev scancode ->keycode table
* @dev: the struct input_dev device descriptor
* @scancode: the desired scancode
* @keycode: the keycode to be retorned.
*
* This routine is used to handle evdev EVIOCGKEY ioctl.
* If the key is not found, returns -EINVAL, otherwise, returns 0.
*/
static int ir_getkeycode(struct input_dev *dev,
int scancode, int *keycode)
{
int i;
struct ir_scancode_table *rc_tab = input_get_drvdata(dev);
struct ir_scancode *keymap = rc_tab->scan;
/* See if we can match the raw key code. */
for (i = 0; i < rc_tab->size; i++)
if (keymap[i].scancode == scancode) {
*keycode = keymap[i].keycode;
return 0;
}
/*
* If is there extra space, returns KEY_RESERVED,
* otherwise, input core won't let ir_setkeycode
* to work
*/
for (i = 0; i < rc_tab->size; i++)
if (keymap[i].keycode == KEY_RESERVED ||
keymap[i].keycode == KEY_UNKNOWN) {
*keycode = KEY_RESERVED;
return 0;
}
return -EINVAL;
}
/**
* ir_setkeycode() - set a keycode at the evdev scancode ->keycode table
* @dev: the struct input_dev device descriptor
* @scancode: the desired scancode
* @keycode: the keycode to be retorned.
*
* This routine is used to handle evdev EVIOCSKEY ioctl.
* There's one caveat here: how can we increase the size of the table?
* If the key is not found, returns -EINVAL, otherwise, returns 0.
*/
static int ir_setkeycode(struct input_dev *dev,
int scancode, int keycode)
{
int i;
struct ir_scancode_table *rc_tab = input_get_drvdata(dev);
struct ir_scancode *keymap = rc_tab->scan;
/* Search if it is replacing an existing keycode */
for (i = 0; i < rc_tab->size; i++)
if (keymap[i].scancode == scancode) {
keymap[i].keycode = keycode;
return 0;
}
/* Search if is there a clean entry. If so, use it */
for (i = 0; i < rc_tab->size; i++)
if (keymap[i].keycode == KEY_RESERVED ||
keymap[i].keycode == KEY_UNKNOWN) {
keymap[i].scancode = scancode;
keymap[i].keycode = keycode;
return 0;
}
/*
* FIXME: Currently, it is not possible to increase the size of
* scancode table. For it to happen, one possibility
* would be to allocate a table with key_map_size + 1,
* copying data, appending the new key on it, and freeing
* the old one - or maybe just allocating some spare space
*/
return -EINVAL;
}
/**
* ir_g_keycode_from_table() - gets the keycode that corresponds to a scancode
* @rc_tab: the ir_scancode_table with the keymap to be used
* @scancode: the scancode that we're seeking
*
* This routine is used by the input routines when a key is pressed at the
* IR. The scancode is received and needs to be converted into a keycode.
* If the key is not found, it returns KEY_UNKNOWN. Otherwise, returns the
* corresponding keycode from the table.
*/
u32 ir_g_keycode_from_table(struct input_dev *dev, u32 scancode)
{
int i;
struct ir_scancode_table *rc_tab = input_get_drvdata(dev);
struct ir_scancode *keymap = rc_tab->scan;
for (i = 0; i < rc_tab->size; i++)
if (keymap[i].scancode == scancode) {
IR_dprintk(1, "%s: scancode 0x%04x keycode 0x%02x\n",
dev->name, scancode, keymap[i].keycode);
return keymap[i].keycode;
}
printk(KERN_INFO "%s: unknown key for scancode 0x%04x\n",
dev->name, scancode);
return KEY_UNKNOWN;
}
EXPORT_SYMBOL_GPL(ir_g_keycode_from_table);
/**
* ir_set_keycode_table() - sets the IR keycode table and add the handlers
* for keymap table get/set
* @input_dev: the struct input_dev descriptor of the device
* @rc_tab: the struct ir_scancode_table table of scancode/keymap
*
* This routine is used to initialize the input infrastructure to work with
* an IR. It requires that the caller initializes the input_dev struct with
* some fields: name,
*/
int ir_set_keycode_table(struct input_dev *input_dev,
struct ir_scancode_table *rc_tab)
{
struct ir_scancode *keymap = rc_tab->scan;
int i;
if (rc_tab->scan == NULL || !rc_tab->size)
return -EINVAL;
/* set the bits for the keys */
IR_dprintk(1, "key map size: %d\n", rc_tab->size);
for (i = 0; i < rc_tab->size; i++) {
IR_dprintk(1, "#%d: setting bit for keycode 0x%04x\n",
i, keymap[i].keycode);
set_bit(keymap[i].keycode, input_dev->keybit);
}
input_dev->getkeycode = ir_getkeycode;
input_dev->setkeycode = ir_setkeycode;
input_set_drvdata(input_dev, rc_tab);
return 0;
}
EXPORT_SYMBOL_GPL(ir_set_keycode_table);
......@@ -106,6 +106,8 @@ struct card_ir {
struct tasklet_struct tlet;
};
/* Routines from ir-functions.c */
void ir_input_init(struct input_dev *dev, struct ir_input_state *ir,
int ir_type, struct ir_scancode_table *ir_codes);
void ir_input_nokey(struct input_dev *dev, struct ir_input_state *ir);
......@@ -120,7 +122,15 @@ u32 ir_rc5_decode(unsigned int code);
void ir_rc5_timer_end(unsigned long data);
void ir_rc5_timer_keyup(unsigned long data);
/* Keymaps to be used by other modules */
/* Routines from ir-keytable.c */
u32 ir_g_keycode_from_table(struct input_dev *input_dev,
u32 scancode);
int ir_set_keycode_table(struct input_dev *input_dev,
struct ir_scancode_table *rc_tab);
/* scancode->keycode map tables from ir-keymaps.c */
extern struct ir_scancode_table ir_codes_empty_table;
extern struct ir_scancode_table ir_codes_avermedia_table;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册