net: dsa: microchip: Replace ksz9477_wait_alu_ready polling with regmap

Regmap provides polling function to poll for bits in a register. This
function is another reimplementation of polling for bit being clear in
a register. Replace this with regmap polling function. Moreover, inline
the function parameters, as the function is never called with any other
parameter values than this one.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Woojung Huh <Woojung.Huh@microchip.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/dsa/microchip/ksz9477.c

@@ -176,22 +176,12 @@ static void ksz9477_write_table(struct ksz_device *dev, u32 *table)
 	ksz_write32(dev, REG_SW_ALU_VAL_D, table[3]);
 }
 
-static int ksz9477_wait_alu_ready(struct ksz_device *dev, u32 waiton,
-				  int timeout)
+static int ksz9477_wait_alu_ready(struct ksz_device *dev)
 {
-	u32 data;
-
-	do {
-		ksz_read32(dev, REG_SW_ALU_CTRL__4, &data);
-		if (!(data & waiton))
-			break;
-		usleep_range(1, 10);
-	} while (timeout-- > 0);
-
-	if (timeout <= 0)
-		return -ETIMEDOUT;
+	unsigned int val;
 
-	return 0;
+	return regmap_read_poll_timeout(dev->regmap[2], REG_SW_ALU_CTRL__4,
+					val, !(val & ALU_START), 10, 1000);
 }
 
 static int ksz9477_wait_alu_sta_ready(struct ksz_device *dev, u32 waiton,
@@ -633,8 +623,8 @@ static int ksz9477_port_fdb_add(struct dsa_switch *ds, int port,
 	ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START);
 
 	/* wait to be finished */
-	ret = ksz9477_wait_alu_ready(dev, ALU_START, 1000);
-	if (ret < 0) {
+	ret = ksz9477_wait_alu_ready(dev);
+	if (ret) {
 		dev_dbg(dev->dev, "Failed to read ALU\n");
 		goto exit;
 	}
@@ -657,8 +647,8 @@ static int ksz9477_port_fdb_add(struct dsa_switch *ds, int port,
 	ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START);
 
 	/* wait to be finished */
-	ret = ksz9477_wait_alu_ready(dev, ALU_START, 1000);
-	if (ret < 0)
+	ret = ksz9477_wait_alu_ready(dev);
+	if (ret)
 		dev_dbg(dev->dev, "Failed to write ALU\n");
 
 exit:
@@ -690,8 +680,8 @@ static int ksz9477_port_fdb_del(struct dsa_switch *ds, int port,
 	ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START);
 
 	/* wait to be finished */
-	ret = ksz9477_wait_alu_ready(dev, ALU_START, 1000);
-	if (ret < 0) {
+	ret = ksz9477_wait_alu_ready(dev);
+	if (ret) {
 		dev_dbg(dev->dev, "Failed to read ALU\n");
 		goto exit;
 	}
@@ -724,8 +714,8 @@ static int ksz9477_port_fdb_del(struct dsa_switch *ds, int port,
 	ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START);
 
 	/* wait to be finished */
-	ret = ksz9477_wait_alu_ready(dev, ALU_START, 1000);
-	if (ret < 0)
+	ret = ksz9477_wait_alu_ready(dev);
+	if (ret)
 		dev_dbg(dev->dev, "Failed to write ALU\n");
 
 exit: