Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 ef37be1b 编写于 作者: A Antti Palosaari 提交者： Mauro Carvalho Chehab
浏览文件
操作

[media] rtl28xxu: move rtl2832u tuner probing to .read_config() 

Move rtl2832u tuner probing correct place.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 4395e4b7
隐藏空白更改
内联 并排
Showing with 175 addition and 177 deletion
drivers/media/usb/dvb-usb-v2/rtl28xxu.c
浏览文件 @ ef37be1b
......@@ -254,6 +254,156 @@ static struct i2c_algorithm rtl28xxu_i2c_algo = {
.functionality = rtl28xxu_i2c_func,
};
static int rtl2832u_read_config(struct dvb_usb_device *d)
{
struct rtl28xxu_priv *priv = d_to_priv(d);
int ret;
u8 buf[2], val;
/* open RTL2832U/RTL2832 I2C gate */
struct rtl28xxu_req req_gate_open = {0x0120, 0x0011, 0x0001, "\x18"};
/* close RTL2832U/RTL2832 I2C gate */
struct rtl28xxu_req req_gate_close = {0x0120, 0x0011, 0x0001, "\x10"};
/* tuner probes */
struct rtl28xxu_req req_fc0012 = {0x00c6, CMD_I2C_RD, 1, buf};
struct rtl28xxu_req req_fc0013 = {0x00c6, CMD_I2C_RD, 1, buf};
struct rtl28xxu_req req_mt2266 = {0x00c0, CMD_I2C_RD, 1, buf};
struct rtl28xxu_req req_fc2580 = {0x01ac, CMD_I2C_RD, 1, buf};
struct rtl28xxu_req req_mt2063 = {0x00c0, CMD_I2C_RD, 1, buf};
struct rtl28xxu_req req_max3543 = {0x00c0, CMD_I2C_RD, 1, buf};
struct rtl28xxu_req req_tua9001 = {0x7ec0, CMD_I2C_RD, 2, buf};
struct rtl28xxu_req req_mxl5007t = {0xd9c0, CMD_I2C_RD, 1, buf};
struct rtl28xxu_req req_e4000 = {0x02c8, CMD_I2C_RD, 1, buf};
struct rtl28xxu_req req_tda18272 = {0x00c0, CMD_I2C_RD, 2, buf};
dev_dbg(&d->udev->dev, "%s:\n", __func__);
ret = rtl28xx_rd_reg(d, SYS_GPIO_DIR, &val);
if (ret)
goto err;
val &= 0xbf;
ret = rtl28xx_wr_reg(d, SYS_GPIO_DIR, val);
if (ret)
goto err;
/* enable as output GPIO3 and GPIO6 */
ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_EN, &val);
if (ret)
goto err;
val |= 0x48;
ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_EN, val);
if (ret)
goto err;
/*
* Probe used tuner. We need to know used tuner before demod attach
* since there is some demod params needed to set according to tuner.
*/
/* open demod I2C gate */
ret = rtl28xxu_ctrl_msg(d, &req_gate_open);
if (ret)
goto err;
priv->tuner_name = "NONE";
/* check FC0012 ID register; reg=00 val=a1 */
ret = rtl28xxu_ctrl_msg(d, &req_fc0012);
if (ret == 0 && buf[0] == 0xa1) {
priv->tuner = TUNER_RTL2832_FC0012;
priv->tuner_name = "FC0012";
goto found;
}
/* check FC0013 ID register; reg=00 val=a3 */
ret = rtl28xxu_ctrl_msg(d, &req_fc0013);
if (ret == 0 && buf[0] == 0xa3) {
priv->tuner = TUNER_RTL2832_FC0013;
priv->tuner_name = "FC0013";
goto found;
}
/* check MT2266 ID register; reg=00 val=85 */
ret = rtl28xxu_ctrl_msg(d, &req_mt2266);
if (ret == 0 && buf[0] == 0x85) {
priv->tuner = TUNER_RTL2832_MT2266;
priv->tuner_name = "MT2266";
goto found;
}
/* check FC2580 ID register; reg=01 val=56 */
ret = rtl28xxu_ctrl_msg(d, &req_fc2580);
if (ret == 0 && buf[0] == 0x56) {
priv->tuner = TUNER_RTL2832_FC2580;
priv->tuner_name = "FC2580";
goto found;
}
/* check MT2063 ID register; reg=00 val=9e || 9c */
ret = rtl28xxu_ctrl_msg(d, &req_mt2063);
if (ret == 0 && (buf[0] == 0x9e || buf[0] == 0x9c)) {
priv->tuner = TUNER_RTL2832_MT2063;
priv->tuner_name = "MT2063";
goto found;
}
/* check MAX3543 ID register; reg=00 val=38 */
ret = rtl28xxu_ctrl_msg(d, &req_max3543);
if (ret == 0 && buf[0] == 0x38) {
priv->tuner = TUNER_RTL2832_MAX3543;
priv->tuner_name = "MAX3543";
goto found;
}
/* check TUA9001 ID register; reg=7e val=2328 */
ret = rtl28xxu_ctrl_msg(d, &req_tua9001);
if (ret == 0 && buf[0] == 0x23 && buf[1] == 0x28) {
priv->tuner = TUNER_RTL2832_TUA9001;
priv->tuner_name = "TUA9001";
goto found;
}
/* check MXL5007R ID register; reg=d9 val=14 */
ret = rtl28xxu_ctrl_msg(d, &req_mxl5007t);
if (ret == 0 && buf[0] == 0x14) {
priv->tuner = TUNER_RTL2832_MXL5007T;
priv->tuner_name = "MXL5007T";
goto found;
}
/* check E4000 ID register; reg=02 val=40 */
ret = rtl28xxu_ctrl_msg(d, &req_e4000);
if (ret == 0 && buf[0] == 0x40) {
priv->tuner = TUNER_RTL2832_E4000;
priv->tuner_name = "E4000";
goto found;
}
/* check TDA18272 ID register; reg=00 val=c760 */
ret = rtl28xxu_ctrl_msg(d, &req_tda18272);
if (ret == 0 && (buf[0] == 0xc7 || buf[1] == 0x60)) {
priv->tuner = TUNER_RTL2832_TDA18272;
priv->tuner_name = "TDA18272";
goto found;
}
found:
dev_dbg(&d->udev->dev, "%s: tuner=%s\n", __func__, priv->tuner_name);
/* close demod I2C gate */
ret = rtl28xxu_ctrl_msg(d, &req_gate_close);
if (ret < 0)
goto err;
return 0;
err:
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
}
static struct rtl2830_config rtl28xxu_rtl2830_mt2060_config = {
.i2c_addr = 0x10, /* 0x20 */
.xtal = 28800000,
......@@ -537,199 +687,45 @@ static int rtl2832u_frontend_attach(struct dvb_usb_adapter *adap)
struct dvb_usb_device *d = adap_to_d(adap);
struct rtl28xxu_priv *priv = d_to_priv(d);
struct rtl2832_config *rtl2832_config;
u8 buf[2], val;
/* open RTL2832U/RTL2832 I2C gate */
struct rtl28xxu_req req_gate_open = {0x0120, 0x0011, 0x0001, "\x18"};
/* close RTL2832U/RTL2832 I2C gate */
struct rtl28xxu_req req_gate_close = {0x0120, 0x0011, 0x0001, "\x10"};
/* for FC0012 tuner probe */
struct rtl28xxu_req req_fc0012 = {0x00c6, CMD_I2C_RD, 1, buf};
/* for FC0013 tuner probe */
struct rtl28xxu_req req_fc0013 = {0x00c6, CMD_I2C_RD, 1, buf};
/* for MT2266 tuner probe */
struct rtl28xxu_req req_mt2266 = {0x00c0, CMD_I2C_RD, 1, buf};
/* for FC2580 tuner probe */
struct rtl28xxu_req req_fc2580 = {0x01ac, CMD_I2C_RD, 1, buf};
/* for MT2063 tuner probe */
struct rtl28xxu_req req_mt2063 = {0x00c0, CMD_I2C_RD, 1, buf};
/* for MAX3543 tuner probe */
struct rtl28xxu_req req_max3543 = {0x00c0, CMD_I2C_RD, 1, buf};
/* for TUA9001 tuner probe */
struct rtl28xxu_req req_tua9001 = {0x7ec0, CMD_I2C_RD, 2, buf};
/* for MXL5007T tuner probe */
struct rtl28xxu_req req_mxl5007t = {0xd9c0, CMD_I2C_RD, 1, buf};
/* for E4000 tuner probe */
struct rtl28xxu_req req_e4000 = {0x02c8, CMD_I2C_RD, 1, buf};
/* for TDA18272 tuner probe */
struct rtl28xxu_req req_tda18272 = {0x00c0, CMD_I2C_RD, 2, buf};
dev_dbg(&d->udev->dev, "%s:\n", __func__);
ret = rtl28xx_rd_reg(d, SYS_GPIO_DIR, &val);
if (ret)
goto err;
val &= 0xbf;
ret = rtl28xx_wr_reg(d, SYS_GPIO_DIR, val);
if (ret)
goto err;
/* enable as output GPIO3 and GPIO6*/
ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_EN, &val);
if (ret)
goto err;
val |= 0x48;
ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_EN, val);
if (ret)
goto err;
/*
* Probe used tuner. We need to know used tuner before demod attach
* since there is some demod params needed to set according to tuner.
*/
/* open demod I2C gate */
ret = rtl28xxu_ctrl_msg(d, &req_gate_open);
if (ret)
goto err;
priv->tuner = TUNER_NONE;
/* check FC0012 ID register; reg=00 val=a1 */
ret = rtl28xxu_ctrl_msg(d, &req_fc0012);
if (ret == 0 && buf[0] == 0xa1) {
priv->tuner = TUNER_RTL2832_FC0012;
switch (priv->tuner) {
case TUNER_RTL2832_FC0012:
rtl2832_config = &rtl28xxu_rtl2832_fc0012_config;
dev_info(&d->udev->dev, "%s: FC0012 tuner found",
KBUILD_MODNAME);
goto found;
}
/* check FC0013 ID register; reg=00 val=a3 */
ret = rtl28xxu_ctrl_msg(d, &req_fc0013);
if (ret == 0 && buf[0] == 0xa3) {
priv->tuner = TUNER_RTL2832_FC0013;
break;
case TUNER_RTL2832_FC0013:
rtl2832_config = &rtl28xxu_rtl2832_fc0013_config;
dev_info(&d->udev->dev, "%s: FC0013 tuner found",
KBUILD_MODNAME);
goto found;
}
/* check MT2266 ID register; reg=00 val=85 */
ret = rtl28xxu_ctrl_msg(d, &req_mt2266);
if (ret == 0 && buf[0] == 0x85) {
priv->tuner = TUNER_RTL2832_MT2266;
/* TODO implement tuner */
dev_info(&d->udev->dev, "%s: MT2266 tuner found",
KBUILD_MODNAME);
goto unsupported;
}
/* check FC2580 ID register; reg=01 val=56 */
ret = rtl28xxu_ctrl_msg(d, &req_fc2580);
if (ret == 0 && buf[0] == 0x56) {
priv->tuner = TUNER_RTL2832_FC2580;
break;
case TUNER_RTL2832_FC2580:
/* FIXME: do not abuse fc0012 settings */
rtl2832_config = &rtl28xxu_rtl2832_fc0012_config;
dev_info(&d->udev->dev, "%s: FC2580 tuner found",
KBUILD_MODNAME);
goto found;
}
/* check MT2063 ID register; reg=00 val=9e || 9c */
ret = rtl28xxu_ctrl_msg(d, &req_mt2063);
if (ret == 0 && (buf[0] == 0x9e || buf[0] == 0x9c)) {
priv->tuner = TUNER_RTL2832_MT2063;
/* TODO implement tuner */
dev_info(&d->udev->dev, "%s: MT2063 tuner found",
KBUILD_MODNAME);
goto unsupported;
}
/* check MAX3543 ID register; reg=00 val=38 */
ret = rtl28xxu_ctrl_msg(d, &req_max3543);
if (ret == 0 && buf[0] == 0x38) {
priv->tuner = TUNER_RTL2832_MAX3543;
/* TODO implement tuner */
dev_info(&d->udev->dev, "%s: MAX3534 tuner found",
KBUILD_MODNAME);
goto unsupported;
}
/* check TUA9001 ID register; reg=7e val=2328 */
ret = rtl28xxu_ctrl_msg(d, &req_tua9001);
if (ret == 0 && buf[0] == 0x23 && buf[1] == 0x28) {
priv->tuner = TUNER_RTL2832_TUA9001;
break;
case TUNER_RTL2832_TUA9001:
rtl2832_config = &rtl28xxu_rtl2832_tua9001_config;
dev_info(&d->udev->dev, "%s: TUA9001 tuner found",
KBUILD_MODNAME);
goto found;
}
/* check MXL5007R ID register; reg=d9 val=14 */
ret = rtl28xxu_ctrl_msg(d, &req_mxl5007t);
if (ret == 0 && buf[0] == 0x14) {
priv->tuner = TUNER_RTL2832_MXL5007T;
/* TODO implement tuner */
dev_info(&d->udev->dev, "%s: MXL5007T tuner found",
KBUILD_MODNAME);
goto unsupported;
}
/* check E4000 ID register; reg=02 val=40 */
ret = rtl28xxu_ctrl_msg(d, &req_e4000);
if (ret == 0 && buf[0] == 0x40) {
priv->tuner = TUNER_RTL2832_E4000;
break;
case TUNER_RTL2832_E4000:
/* FIXME: do not abuse fc0012 settings */
rtl2832_config = &rtl28xxu_rtl2832_fc0012_config;
dev_info(&d->udev->dev, "%s: E4000 tuner found",
KBUILD_MODNAME);
goto found;
}
/* check TDA18272 ID register; reg=00 val=c760 */
ret = rtl28xxu_ctrl_msg(d, &req_tda18272);
if (ret == 0 && (buf[0] == 0xc7 || buf[1] == 0x60)) {
priv->tuner = TUNER_RTL2832_TDA18272;
/* TODO implement tuner */
dev_info(&d->udev->dev, "%s: TDA18272 tuner found",
KBUILD_MODNAME);
goto unsupported;
}
unsupported:
/* close demod I2C gate */
ret = rtl28xxu_ctrl_msg(d, &req_gate_close);
if (ret)
goto err;
/* tuner not found */
dev_dbg(&d->udev->dev, "%s: No compatible tuner found\n", __func__);
ret = -ENODEV;
return ret;
found:
/* close demod I2C gate */
ret = rtl28xxu_ctrl_msg(d, &req_gate_close);
if (ret)
break;
default:
dev_err(&d->udev->dev, "%s: unknown tuner=%s\n",
KBUILD_MODNAME, priv->tuner_name);
ret = -ENODEV;
goto err;
}
/* attach demodulator */
adap->fe[0] = dvb_attach(rtl2832_attach, rtl2832_config,
&d->i2c_adap);
if (adap->fe[0] == NULL) {
ret = -ENODEV;
goto err;
}
adap->fe[0] = dvb_attach(rtl2832_attach, rtl2832_config, &d->i2c_adap);
if (!adap->fe[0]) {
ret = -ENODEV;
goto err;
}
/* set fe callbacks */
/* set fe callback */
adap->fe[0]->callback = rtl2832u_frontend_callback;
return ret;
return 0;
err:
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
......@@ -1304,6 +1300,7 @@ static const struct dvb_usb_device_properties rtl2832u_props = {
.power_ctrl = rtl2832u_power_ctrl,
.i2c_algo = &rtl28xxu_i2c_algo,
.read_config = rtl2832u_read_config,
.frontend_attach = rtl2832u_frontend_attach,
.tuner_attach = rtl2832u_tuner_attach,
.init = rtl28xxu_init,
......
drivers/media/usb/dvb-usb-v2/rtl28xxu.h
浏览文件 @ ef37be1b
......@@ -53,6 +53,7 @@
struct rtl28xxu_priv {
u8 chip_id;
u8 tuner;
char *tuner_name;
u8 page; /* integrated demod active register page */
bool rc_active;
};
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或