ARM: Orion: SATA: Add per channel clk/clkdev support.

The Orion kirkwood chips have a gatable clock per SATA channel. Add
code to get and enable this clk if it exists.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Tested-by: NJamie Lentin <jm@lentin.co.uk>
Signed-off-by: NMike Turquette <mturquette@linaro.org>

arch/arm/mach-kirkwood/common.c

@@ -86,7 +86,7 @@ static struct clk __init *kirkwood_register_gate(const char *name, u8 bit_idx)
 
 void __init kirkwood_clk_init(void)
 {
-	struct clk *runit, *ge0, *ge1;
+	struct clk *runit, *ge0, *ge1, *sata0, *sata1, *usb0;
 
 	tclk = clk_register_fixed_rate(NULL, "tclk", NULL,
 				       CLK_IS_ROOT, kirkwood_tclk);
@@ -94,8 +94,8 @@ void __init kirkwood_clk_init(void)
 	runit = kirkwood_register_gate("runit",  CGC_BIT_RUNIT);
 	ge0 = kirkwood_register_gate("ge0",    CGC_BIT_GE0);
 	ge1 = kirkwood_register_gate("ge1",    CGC_BIT_GE1);
-	kirkwood_register_gate("sata0",  CGC_BIT_SATA0);
-	kirkwood_register_gate("sata1",  CGC_BIT_SATA1);
+	sata0 = kirkwood_register_gate("sata0",  CGC_BIT_SATA0);
+	sata1 = kirkwood_register_gate("sata1",  CGC_BIT_SATA1);
 	kirkwood_register_gate("usb0",   CGC_BIT_USB0);
 	kirkwood_register_gate("sdio",   CGC_BIT_SDIO);
 	kirkwood_register_gate("crypto", CGC_BIT_CRYPTO);
@@ -113,6 +113,8 @@ void __init kirkwood_clk_init(void)
 	orion_clkdev_add(NULL, MV643XX_ETH_NAME ".0", ge0);
 	orion_clkdev_add(NULL, MV643XX_ETH_NAME ".1", ge1);
 	orion_clkdev_add(NULL, "orion_wdt", tclk);
+	orion_clkdev_add("0", "sata_mv.0", sata0);
+	orion_clkdev_add("1", "sata_mv.0", sata1);
 }
 
 /*****************************************************************************

drivers/ata/sata_mv.c

@@ -553,6 +553,7 @@ struct mv_host_priv {
 
 #if defined(CONFIG_HAVE_CLK)
 	struct clk		*clk;
+	struct clk              **port_clks;
 #endif
 	/*
 	 * These consistent DMA memory pools give us guaranteed
@@ -4027,6 +4028,9 @@ static int mv_platform_probe(struct platform_device *pdev)
 	struct resource *res;
 	int n_ports = 0;
 	int rc;
+#if defined(CONFIG_HAVE_CLK)
+	int port;
+#endif
 
 	ata_print_version_once(&pdev->dev, DRV_VERSION);
 
@@ -4054,6 +4058,13 @@ static int mv_platform_probe(struct platform_device *pdev)
 
 	if (!host || !hpriv)
 		return -ENOMEM;
+#if defined(CONFIG_HAVE_CLK)
+	hpriv->port_clks = devm_kzalloc(&pdev->dev,
+					sizeof(struct clk *) * n_ports,
+					GFP_KERNEL);
+	if (!hpriv->port_clks)
+		return -ENOMEM;
+#endif
 	host->private_data = hpriv;
 	hpriv->n_ports = n_ports;
 	hpriv->board_idx = chip_soc;
@@ -4066,9 +4077,17 @@ static int mv_platform_probe(struct platform_device *pdev)
 #if defined(CONFIG_HAVE_CLK)
 	hpriv->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(hpriv->clk))
-		dev_notice(&pdev->dev, "cannot get clkdev\n");
+		dev_notice(&pdev->dev, "cannot get optional clkdev\n");
 	else
-		clk_enable(hpriv->clk);
+		clk_prepare_enable(hpriv->clk);
+
+	for (port = 0; port < n_ports; port++) {
+		char port_number[16];
+		sprintf(port_number, "%d", port);
+		hpriv->port_clks[port] = clk_get(&pdev->dev, port_number);
+		if (!IS_ERR(hpriv->port_clks[port]))
+			clk_prepare_enable(hpriv->port_clks[port]);
+	}
 #endif
 
 	/*
@@ -4098,9 +4117,15 @@ static int mv_platform_probe(struct platform_device *pdev)
 err:
 #if defined(CONFIG_HAVE_CLK)
 	if (!IS_ERR(hpriv->clk)) {
-		clk_disable(hpriv->clk);
+		clk_disable_unprepare(hpriv->clk);
 		clk_put(hpriv->clk);
 	}
+	for (port = 0; port < n_ports; port++) {
+		if (!IS_ERR(hpriv->port_clks[port])) {
+			clk_disable_unprepare(hpriv->port_clks[port]);
+			clk_put(hpriv->port_clks[port]);
+		}
+	}
 #endif
 
 	return rc;
@@ -4119,14 +4144,21 @@ static int __devexit mv_platform_remove(struct platform_device *pdev)
 	struct ata_host *host = platform_get_drvdata(pdev);
 #if defined(CONFIG_HAVE_CLK)
 	struct mv_host_priv *hpriv = host->private_data;
+	int port;
 #endif
 	ata_host_detach(host);
 
 #if defined(CONFIG_HAVE_CLK)
 	if (!IS_ERR(hpriv->clk)) {
-		clk_disable(hpriv->clk);
+		clk_disable_unprepare(hpriv->clk);
 		clk_put(hpriv->clk);
 	}
+	for (port = 0; port < host->n_ports; port++) {
+		if (!IS_ERR(hpriv->port_clks[port])) {
+			clk_disable_unprepare(hpriv->port_clks[port]);
+			clk_put(hpriv->port_clks[port]);
+		}
+	}
 #endif
 	return 0;
 }