Skip to content

K
Kernel

openeuler / Kernel
大约 1 年 前同步成功

通知 6
Star 0
Fork 0
K
Kernel
提交 eedd62ed 编写于 作者: P Paul Gortmaker 提交者： Kumar Gala
浏览文件
操作

[POWERPC] 83xx: mpc834x_mds - Convert device tree source to dts-v1 

Move mpc834x_mds device tree source forward to dts-v1 format.  Nothing
too complex in this one, so it boils down to just adding a bunch of 0x
in the right places and converting clock speeds to decimal.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
上级 44f25fb4
隐藏空白更改
内联 并排
Showing with 127 addition and 125 deletion
arch/powerpc/boot/dts/mpc834x_mds.dts
浏览文件 @ eedd62ed
...@@ -9,6 +9,8 @@ ...@@ -9,6 +9,8 @@
* option) any later version. * option) any later version.
*/ */
/dts-v1/;
/ { / {
model = "MPC8349EMDS"; model = "MPC8349EMDS";
compatible = "MPC8349EMDS", "MPC834xMDS", "MPC83xxMDS"; compatible = "MPC8349EMDS", "MPC834xMDS", "MPC83xxMDS";
...@@ -31,10 +33,10 @@ ...@@ -31,10 +33,10 @@
PowerPC,8349@0 { PowerPC,8349@0 {
device_type = "cpu"; device_type = "cpu";
reg = <0>; reg = <0>;
d-cache-line-size = <20>; // 32 bytes d-cache-line-size = <32>;
i-cache-line-size = <20>; // 32 bytes i-cache-line-size = <32>;
d-cache-size = <8000>; // L1, 32K d-cache-size = <32768>;
i-cache-size = <8000>; // L1, 32K i-cache-size = <32768>;
timebase-frequency = <0>; // from bootloader timebase-frequency = <0>; // from bootloader
bus-frequency = <0>; // from bootloader bus-frequency = <0>; // from bootloader
clock-frequency = <0>; // from bootloader clock-frequency = <0>; // from bootloader
...@@ -43,26 +45,26 @@ ...@@ -43,26 +45,26 @@
memory { memory {
device_type = "memory"; device_type = "memory";
reg = <00000000 10000000>; // 256MB at 0 reg = <0x00000000 0x10000000>; // 256MB at 0
}; };
bcsr@e2400000 { bcsr@e2400000 {
device_type = "board-control"; device_type = "board-control";
reg = <e2400000 8000>; reg = <0xe2400000 0x8000>;
}; };
soc8349@e0000000 { soc8349@e0000000 {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
device_type = "soc"; device_type = "soc";
ranges = <0 e0000000 00100000>; ranges = <0x0 0xe0000000 0x00100000>;
reg = <e0000000 00000200>; reg = <0xe0000000 0x00000200>;
bus-frequency = <0>; bus-frequency = <0>;
wdt@200 { wdt@200 {
device_type = "watchdog"; device_type = "watchdog";
compatible = "mpc83xx_wdt"; compatible = "mpc83xx_wdt";
reg = <200 100>; reg = <0x200 0x100>;
}; };
i2c@3000 { i2c@3000 {
...@@ -70,14 +72,14 @@ ...@@ -70,14 +72,14 @@
#size-cells = <0>; #size-cells = <0>;
cell-index = <0>; cell-index = <0>;
compatible = "fsl-i2c"; compatible = "fsl-i2c";
reg = <3000 100>; reg = <0x3000 0x100>;
interrupts = <e 8>; interrupts = <14 8>;
interrupt-parent = < &ipic >; interrupt-parent = <&ipic>;
dfsrr; dfsrr;
rtc@68 { rtc@68 {
compatible = "dallas,ds1374"; compatible = "dallas,ds1374";
reg = <68>; reg = <0x68>;
}; };
}; };
...@@ -86,41 +88,41 @@ ...@@ -86,41 +88,41 @@
#size-cells = <0>; #size-cells = <0>;
cell-index = <1>; cell-index = <1>;
compatible = "fsl-i2c"; compatible = "fsl-i2c";
reg = <3100 100>; reg = <0x3100 0x100>;
interrupts = <f 8>; interrupts = <15 8>;
interrupt-parent = < &ipic >; interrupt-parent = <&ipic>;
dfsrr; dfsrr;
}; };
spi@7000 { spi@7000 {
device_type = "spi"; device_type = "spi";
compatible = "fsl_spi"; compatible = "fsl_spi";
reg = <7000 1000>; reg = <0x7000 0x1000>;
interrupts = <10 8>; interrupts = <16 8>;
interrupt-parent = < &ipic >; interrupt-parent = <&ipic>;
mode = "cpu"; mode = "cpu";
}; };
/* phy type (ULPI or SERIAL) are only types supportted for MPH */ /* phy type (ULPI or SERIAL) are only types supported for MPH */
/* port = 0 or 1 */ /* port = 0 or 1 */
usb@22000 { usb@22000 {
compatible = "fsl-usb2-mph"; compatible = "fsl-usb2-mph";
reg = <22000 1000>; reg = <0x22000 0x1000>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
interrupt-parent = < &ipic >; interrupt-parent = <&ipic>;
interrupts = <27 8>; interrupts = <39 8>;
phy_type = "ulpi"; phy_type = "ulpi";
port1; port1;
}; };
/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
usb@23000 { usb@23000 {
compatible = "fsl-usb2-dr"; compatible = "fsl-usb2-dr";
reg = <23000 1000>; reg = <0x23000 0x1000>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
interrupt-parent = < &ipic >; interrupt-parent = <&ipic>;
interrupts = <26 8>; interrupts = <38 8>;
dr_mode = "otg"; dr_mode = "otg";
phy_type = "ulpi"; phy_type = "ulpi";
}; };
...@@ -129,18 +131,18 @@ ...@@ -129,18 +131,18 @@
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
compatible = "fsl,gianfar-mdio"; compatible = "fsl,gianfar-mdio";
reg = <24520 20>; reg = <0x24520 0x20>;
phy0: ethernet-phy@0 { phy0: ethernet-phy@0 {
interrupt-parent = < &ipic >; interrupt-parent = <&ipic>;
interrupts = <11 8>; interrupts = <17 8>;
reg = <0>; reg = <0x0>;
device_type = "ethernet-phy"; device_type = "ethernet-phy";
}; };
phy1: ethernet-phy@1 { phy1: ethernet-phy@1 {
interrupt-parent = < &ipic >; interrupt-parent = <&ipic>;
interrupts = <12 8>; interrupts = <18 8>;
reg = <1>; reg = <0x1>;
device_type = "ethernet-phy"; device_type = "ethernet-phy";
}; };
}; };
...@@ -150,11 +152,11 @@ ...@@ -150,11 +152,11 @@
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <24000 1000>; reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <20 8 21 8 22 8>; interrupts = <32 8 33 8 34 8>;
interrupt-parent = < &ipic >; interrupt-parent = <&ipic>;
phy-handle = < &phy0 >; phy-handle = <&phy0>;
linux,network-index = <0>; linux,network-index = <0>;
}; };
...@@ -163,11 +165,11 @@ ...@@ -163,11 +165,11 @@
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <25000 1000>; reg = <0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <23 8 24 8 25 8>; interrupts = <35 8 36 8 37 8>;
interrupt-parent = < &ipic >; interrupt-parent = <&ipic>;
phy-handle = < &phy1 >; phy-handle = <&phy1>;
linux,network-index = <1>; linux,network-index = <1>;
}; };
...@@ -175,20 +177,20 @@ ...@@ -175,20 +177,20 @@
cell-index = <0>; cell-index = <0>;
device_type = "serial"; device_type = "serial";
compatible = "ns16550"; compatible = "ns16550";
reg = <4500 100>; reg = <0x4500 0x100>;
clock-frequency = <0>; clock-frequency = <0>;
interrupts = <9 8>; interrupts = <9 8>;
interrupt-parent = < &ipic >; interrupt-parent = <&ipic>;
}; };
serial1: serial@4600 { serial1: serial@4600 {
cell-index = <1>; cell-index = <1>;
device_type = "serial"; device_type = "serial";
compatible = "ns16550"; compatible = "ns16550";
reg = <4600 100>; reg = <0x4600 0x100>;
clock-frequency = <0>; clock-frequency = <0>;
interrupts = <a 8>; interrupts = <10 8>;
interrupt-parent = < &ipic >; interrupt-parent = <&ipic>;
}; };
/* May need to remove if on a part without crypto engine */ /* May need to remove if on a part without crypto engine */
...@@ -196,15 +198,15 @@ ...@@ -196,15 +198,15 @@
device_type = "crypto"; device_type = "crypto";
model = "SEC2"; model = "SEC2";
compatible = "talitos"; compatible = "talitos";
reg = <30000 10000>; reg = <0x30000 0x10000>;
interrupts = <b 8>; interrupts = <11 8>;
interrupt-parent = < &ipic >; interrupt-parent = <&ipic>;
num-channels = <4>; num-channels = <4>;
channel-fifo-len = <18>; channel-fifo-len = <0x18>;
exec-units-mask = <0000007e>; exec-units-mask = <0x0000007e>;
/* desc mask is for rev2.0, /* desc mask is for rev2.0,
* we need runtime fixup for >2.0 */ * we need runtime fixup for >2.0 */
descriptor-types-mask = <01010ebf>; descriptor-types-mask = <0x01010ebf>;
}; };
/* IPIC /* IPIC
...@@ -217,129 +219,129 @@ ...@@ -217,129 +219,129 @@
interrupt-controller; interrupt-controller;
#address-cells = <0>; #address-cells = <0>;
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <700 100>; reg = <0x700 0x100>;
device_type = "ipic"; device_type = "ipic";
}; };
}; };
pci0: pci@e0008500 { pci0: pci@e0008500 {
cell-index = <1>; cell-index = <1>;
interrupt-map-mask = <f800 0 0 7>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = < interrupt-map = <
/* IDSEL 0x11 */ /* IDSEL 0x11 */
8800 0 0 1 &ipic 14 8 0x8800 0x0 0x0 0x1 &ipic 20 0x8
8800 0 0 2 &ipic 15 8 0x8800 0x0 0x0 0x2 &ipic 21 0x8
8800 0 0 3 &ipic 16 8 0x8800 0x0 0x0 0x3 &ipic 22 0x8
8800 0 0 4 &ipic 17 8 0x8800 0x0 0x0 0x4 &ipic 23 0x8
/* IDSEL 0x12 */ /* IDSEL 0x12 */
9000 0 0 1 &ipic 16 8 0x9000 0x0 0x0 0x1 &ipic 22 0x8
9000 0 0 2 &ipic 17 8 0x9000 0x0 0x0 0x2 &ipic 23 0x8
9000 0 0 3 &ipic 14 8 0x9000 0x0 0x0 0x3 &ipic 20 0x8
9000 0 0 4 &ipic 15 8 0x9000 0x0 0x0 0x4 &ipic 21 0x8
/* IDSEL 0x13 */ /* IDSEL 0x13 */
9800 0 0 1 &ipic 17 8 0x9800 0x0 0x0 0x1 &ipic 23 0x8
9800 0 0 2 &ipic 14 8 0x9800 0x0 0x0 0x2 &ipic 20 0x8
9800 0 0 3 &ipic 15 8 0x9800 0x0 0x0 0x3 &ipic 21 0x8
9800 0 0 4 &ipic 16 8 0x9800 0x0 0x0 0x4 &ipic 22 0x8
/* IDSEL 0x15 */ /* IDSEL 0x15 */
a800 0 0 1 &ipic 14 8 0xa800 0x0 0x0 0x1 &ipic 20 0x8
a800 0 0 2 &ipic 15 8 0xa800 0x0 0x0 0x2 &ipic 21 0x8
a800 0 0 3 &ipic 16 8 0xa800 0x0 0x0 0x3 &ipic 22 0x8
a800 0 0 4 &ipic 17 8 0xa800 0x0 0x0 0x4 &ipic 23 0x8
/* IDSEL 0x16 */ /* IDSEL 0x16 */
b000 0 0 1 &ipic 17 8 0xb000 0x0 0x0 0x1 &ipic 23 0x8
b000 0 0 2 &ipic 14 8 0xb000 0x0 0x0 0x2 &ipic 20 0x8
b000 0 0 3 &ipic 15 8 0xb000 0x0 0x0 0x3 &ipic 21 0x8
b000 0 0 4 &ipic 16 8 0xb000 0x0 0x0 0x4 &ipic 22 0x8
/* IDSEL 0x17 */ /* IDSEL 0x17 */
b800 0 0 1 &ipic 16 8 0xb800 0x0 0x0 0x1 &ipic 22 0x8
b800 0 0 2 &ipic 17 8 0xb800 0x0 0x0 0x2 &ipic 23 0x8
b800 0 0 3 &ipic 14 8 0xb800 0x0 0x0 0x3 &ipic 20 0x8
b800 0 0 4 &ipic 15 8 0xb800 0x0 0x0 0x4 &ipic 21 0x8
/* IDSEL 0x18 */ /* IDSEL 0x18 */
c000 0 0 1 &ipic 15 8 0xc000 0x0 0x0 0x1 &ipic 21 0x8
c000 0 0 2 &ipic 16 8 0xc000 0x0 0x0 0x2 &ipic 22 0x8
c000 0 0 3 &ipic 17 8 0xc000 0x0 0x0 0x3 &ipic 23 0x8
c000 0 0 4 &ipic 14 8>; 0xc000 0x0 0x0 0x4 &ipic 20 8>;
interrupt-parent = < &ipic >; interrupt-parent = <&ipic>;
interrupts = <42 8>; interrupts = <66 8>;
bus-range = <0 0>; bus-range = <0 0>;
ranges = <02000000 0 90000000 90000000 0 10000000 ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
42000000 0 80000000 80000000 0 10000000 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
01000000 0 00000000 e2000000 0 00100000>; 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
clock-frequency = <3f940aa>; clock-frequency = <66666666>;
#interrupt-cells = <1>; #interrupt-cells = <1>;
#size-cells = <2>; #size-cells = <2>;
#address-cells = <3>; #address-cells = <3>;
reg = <e0008500 100>; reg = <0xe0008500 0x100>;
compatible = "fsl,mpc8349-pci"; compatible = "fsl,mpc8349-pci";
device_type = "pci"; device_type = "pci";
}; };
pci1: pci@e0008600 { pci1: pci@e0008600 {
cell-index = <2>; cell-index = <2>;
interrupt-map-mask = <f800 0 0 7>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = < interrupt-map = <
/* IDSEL 0x11 */ /* IDSEL 0x11 */
8800 0 0 1 &ipic 14 8 0x8800 0x0 0x0 0x1 &ipic 20 0x8
8800 0 0 2 &ipic 15 8 0x8800 0x0 0x0 0x2 &ipic 21 0x8
8800 0 0 3 &ipic 16 8 0x8800 0x0 0x0 0x3 &ipic 22 0x8
8800 0 0 4 &ipic 17 8 0x8800 0x0 0x0 0x4 &ipic 23 0x8
/* IDSEL 0x12 */ /* IDSEL 0x12 */
9000 0 0 1 &ipic 16 8 0x9000 0x0 0x0 0x1 &ipic 22 0x8
9000 0 0 2 &ipic 17 8 0x9000 0x0 0x0 0x2 &ipic 23 0x8
9000 0 0 3 &ipic 14 8 0x9000 0x0 0x0 0x3 &ipic 20 0x8
9000 0 0 4 &ipic 15 8 0x9000 0x0 0x0 0x4 &ipic 21 0x8
/* IDSEL 0x13 */ /* IDSEL 0x13 */
9800 0 0 1 &ipic 17 8 0x9800 0x0 0x0 0x1 &ipic 23 0x8
9800 0 0 2 &ipic 14 8 0x9800 0x0 0x0 0x2 &ipic 20 0x8
9800 0 0 3 &ipic 15 8 0x9800 0x0 0x0 0x3 &ipic 21 0x8
9800 0 0 4 &ipic 16 8 0x9800 0x0 0x0 0x4 &ipic 22 0x8
/* IDSEL 0x15 */ /* IDSEL 0x15 */
a800 0 0 1 &ipic 14 8 0xa800 0x0 0x0 0x1 &ipic 20 0x8
a800 0 0 2 &ipic 15 8 0xa800 0x0 0x0 0x2 &ipic 21 0x8
a800 0 0 3 &ipic 16 8 0xa800 0x0 0x0 0x3 &ipic 22 0x8
a800 0 0 4 &ipic 17 8 0xa800 0x0 0x0 0x4 &ipic 23 0x8
/* IDSEL 0x16 */ /* IDSEL 0x16 */
b000 0 0 1 &ipic 17 8 0xb000 0x0 0x0 0x1 &ipic 23 0x8
b000 0 0 2 &ipic 14 8 0xb000 0x0 0x0 0x2 &ipic 20 0x8
b000 0 0 3 &ipic 15 8 0xb000 0x0 0x0 0x3 &ipic 21 0x8
b000 0 0 4 &ipic 16 8 0xb000 0x0 0x0 0x4 &ipic 22 0x8
/* IDSEL 0x17 */ /* IDSEL 0x17 */
b800 0 0 1 &ipic 16 8 0xb800 0x0 0x0 0x1 &ipic 22 0x8
b800 0 0 2 &ipic 17 8 0xb800 0x0 0x0 0x2 &ipic 23 0x8
b800 0 0 3 &ipic 14 8 0xb800 0x0 0x0 0x3 &ipic 20 0x8
b800 0 0 4 &ipic 15 8 0xb800 0x0 0x0 0x4 &ipic 21 0x8
/* IDSEL 0x18 */ /* IDSEL 0x18 */
c000 0 0 1 &ipic 15 8 0xc000 0x0 0x0 0x1 &ipic 21 0x8
c000 0 0 2 &ipic 16 8 0xc000 0x0 0x0 0x2 &ipic 22 0x8
c000 0 0 3 &ipic 17 8 0xc000 0x0 0x0 0x3 &ipic 23 0x8
c000 0 0 4 &ipic 14 8>; 0xc000 0x0 0x0 0x4 &ipic 20 8>;
interrupt-parent = < &ipic >; interrupt-parent = <&ipic>;
interrupts = <42 8>; interrupts = <66 8>;
bus-range = <0 0>; bus-range = <0 0>;
ranges = <02000000 0 b0000000 b0000000 0 10000000 ranges = <0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
42000000 0 a0000000 a0000000 0 10000000 0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
01000000 0 00000000 e2100000 0 00100000>; 0x01000000 0x0 0x00000000 0xe2100000 0x0 0x00100000>;
clock-frequency = <3f940aa>; clock-frequency = <66666666>;
#interrupt-cells = <1>; #interrupt-cells = <1>;
#size-cells = <2>; #size-cells = <2>;
#address-cells = <3>; #address-cells = <3>;
reg = <e0008600 100>; reg = <0xe0008600 0x100>;
compatible = "fsl,mpc8349-pci"; compatible = "fsl,mpc8349-pci";
device_type = "pci"; device_type = "pci";
}; };
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或