提交 eeb01496 编写于 作者: J John W Linville 提交者: Jeff Kirsher

igb: support BCM54616 PHY

The management port on an Edgecore AS7712-32 switch uses an igb MAC, but
it uses a BCM54616 PHY. Without a patch like this, loading the igb
module produces dmesg output like this:

[    3.439125] igb: Copyright (c) 2007-2014 Intel Corporation.
[    3.439866] igb: probe of 0000:00:14.0 failed with error -2
Signed-off-by: NJohn W Linville <linville@tuxdriver.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
上级 d4661248
......@@ -340,6 +340,9 @@ static s32 igb_init_phy_params_82575(struct e1000_hw *hw)
phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state_82580;
phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88;
break;
case BCM54616_E_PHY_ID:
phy->type = e1000_phy_bcm54616;
break;
default:
ret_val = -E1000_ERR_PHY;
goto out;
......@@ -1659,6 +1662,9 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
case e1000_phy_82580:
ret_val = igb_copper_link_setup_82580(hw);
break;
case e1000_phy_bcm54616:
ret_val = 0;
break;
default:
ret_val = -E1000_ERR_PHY;
break;
......
......@@ -889,6 +889,7 @@
#define I210_I_PHY_ID 0x01410C00
#define M88E1543_E_PHY_ID 0x01410EA0
#define M88E1512_E_PHY_ID 0x01410DD0
#define BCM54616_E_PHY_ID 0x03625D10
/* M88E1000 Specific Registers */
#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */
......
......@@ -128,6 +128,7 @@ enum e1000_phy_type {
e1000_phy_ife,
e1000_phy_82580,
e1000_phy_i210,
e1000_phy_bcm54616,
};
enum e1000_bus_type {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册