Merge tag 'for-v3.13/hwmod' of...

Merge tag 'for-v3.13/hwmod' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.13/hwmod

Some OMAP hwmod changes for 3.13.  Significant changes here include:

- support for moving some of the hwmod flags to DT data

- support for the SSI, hardware spinlock, USB host/TLL, and RNG IP
  blocks for various OMAPs

- a fix that again decouples hwmod data changes from unrelated DT data
  patchsets

Basic test logs are available at:

http://www.pwsan.com/omap/testlogs/prcm_fixes_v3.13/20131009094936/

The summary reports that the 4460varsomom boots are failing, but this looks
incorrect - it's probably a bug in the validation scripts here.

arch/arm/mach-omap2/omap_hwmod.c

@@ -2357,25 +2357,29 @@ static struct device_node *of_dev_hwmod_lookup(struct device_node *np,
 /**
  * _init_mpu_rt_base - populate the virtual address for a hwmod
  * @oh: struct omap_hwmod * to locate the virtual address
+ * @data: (unused, caller should pass NULL)
+ * @np: struct device_node * of the IP block's device node in the DT data
  *
  * Cache the virtual address used by the MPU to access this IP block's
  * registers.  This address is needed early so the OCP registers that
  * are part of the device's address space can be ioremapped properly.
- * No return value.
+ *
+ * Returns 0 on success, -EINVAL if an invalid hwmod is passed, and
+ * -ENXIO on absent or invalid register target address space.
  */
-static void __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data)
+static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
+				    struct device_node *np)
 {
 	struct omap_hwmod_addr_space *mem;
 	void __iomem *va_start = NULL;
-	struct device_node *np;
 
 	if (!oh)
-		return;
+		return -EINVAL;
 
 	_save_mpu_port_index(oh);
 
 	if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
-		return;
+		return -ENXIO;
 
 	mem = _find_mpu_rt_addr_space(oh);
 	if (!mem) {
@@ -2383,25 +2387,24 @@ static void __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data)
 			 oh->name);
 
 		/* Extract the IO space from device tree blob */
-		if (!of_have_populated_dt())
-			return;
+		if (!np)
+			return -ENXIO;
 
-		np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh);
-		if (np)
-			va_start = of_iomap(np, oh->mpu_rt_idx);
+		va_start = of_iomap(np, oh->mpu_rt_idx);
 	} else {
 		va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start);
 	}
 
 	if (!va_start) {
 		pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name);
-		return;
+		return -ENXIO;
 	}
 
 	pr_debug("omap_hwmod: %s: MPU register target at va %p\n",
 		 oh->name, va_start);
 
 	oh->_mpu_rt_va = va_start;
+	return 0;
 }
 
 /**
@@ -2414,18 +2417,28 @@ static void __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data)
  * registered at this point.  This is the first of two phases for
  * hwmod initialization.  Code called here does not touch any hardware
  * registers, it simply prepares internal data structures.  Returns 0
- * upon success or if the hwmod isn't registered, or -EINVAL upon
- * failure.
+ * upon success or if the hwmod isn't registered or if the hwmod's
+ * address space is not defined, or -EINVAL upon failure.
  */
 static int __init _init(struct omap_hwmod *oh, void *data)
 {
 	int r;
+	struct device_node *np = NULL;
 
 	if (oh->_state != _HWMOD_STATE_REGISTERED)
 		return 0;
 
-	if (oh->class->sysc)
-		_init_mpu_rt_base(oh, NULL);
+	if (of_have_populated_dt())
+		np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh);
+
+	if (oh->class->sysc) {
+		r = _init_mpu_rt_base(oh, NULL, np);
+		if (r < 0) {
+			WARN(1, "omap_hwmod: %s: doesn't have mpu register target base\n",
+			     oh->name);
+			return 0;
+		}
+	}
 
 	r = _init_clocks(oh, NULL);
 	if (r < 0) {
@@ -2433,6 +2446,12 @@ static int __init _init(struct omap_hwmod *oh, void *data)
 		return -EINVAL;
 	}
 
+	if (np)
+		if (of_find_property(np, "ti,no-reset-on-init", NULL))
+			oh->flags |= HWMOD_INIT_NO_RESET;
+		if (of_find_property(np, "ti,no-idle-on-init", NULL))
+			oh->flags |= HWMOD_INIT_NO_IDLE;
+
 	oh->_state = _HWMOD_STATE_INITIALIZED;
 
 	return 0;

arch/arm/mach-omap2/omap_hwmod_33xx_data.c

@@ -52,7 +52,7 @@ static struct omap_hwmod am33xx_emif_hwmod = {
 	.name		= "emif",
 	.class		= &am33xx_emif_hwmod_class,
 	.clkdm_name	= "l3_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "dpll_ddr_m2_div2_ck",
 	.prcm		= {
 		.omap4	= {
@@ -74,7 +74,7 @@ static struct omap_hwmod am33xx_l3_main_hwmod = {
 	.name		= "l3_main",
 	.class		= &am33xx_l3_hwmod_class,
 	.clkdm_name	= "l3_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "l3_gclk",
 	.prcm		= {
 		.omap4	= {
@@ -96,7 +96,7 @@ static struct omap_hwmod am33xx_l3_instr_hwmod = {
 	.name		= "l3_instr",
 	.class		= &am33xx_l3_hwmod_class,
 	.clkdm_name	= "l3_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "l3_gclk",
 	.prcm		= {
 		.omap4	= {
@@ -119,7 +119,7 @@ static struct omap_hwmod am33xx_l4_ls_hwmod = {
 	.name		= "l4_ls",
 	.class		= &am33xx_l4_hwmod_class,
 	.clkdm_name	= "l4ls_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "l4ls_gclk",
 	.prcm		= {
 		.omap4	= {
@@ -134,7 +134,7 @@ static struct omap_hwmod am33xx_l4_hs_hwmod = {
 	.name		= "l4_hs",
 	.class		= &am33xx_l4_hwmod_class,
 	.clkdm_name	= "l4hs_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "l4hs_gclk",
 	.prcm		= {
 		.omap4	= {
@@ -150,7 +150,7 @@ static struct omap_hwmod am33xx_l4_wkup_hwmod = {
 	.name		= "l4_wkup",
 	.class		= &am33xx_l4_hwmod_class,
 	.clkdm_name	= "l4_wkup_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.prcm		= {
 		.omap4	= {
 			.clkctrl_offs	= AM33XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET,
@@ -170,7 +170,7 @@ static struct omap_hwmod am33xx_mpu_hwmod = {
 	.name		= "mpu",
 	.class		= &am33xx_mpu_hwmod_class,
 	.clkdm_name	= "mpu_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "dpll_mpu_m2_ck",
 	.prcm		= {
 		.omap4	= {
@@ -450,7 +450,7 @@ static struct omap_hwmod am33xx_ocmcram_hwmod = {
 	.name		= "ocmcram",
 	.class		= &am33xx_ocmcram_hwmod_class,
 	.clkdm_name	= "l3_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "l3_gclk",
 	.prcm		= {
 		.omap4	= {
@@ -532,7 +532,7 @@ static struct omap_hwmod am33xx_control_hwmod = {
 	.name		= "control",
 	.class		= &am33xx_control_hwmod_class,
 	.clkdm_name	= "l4_wkup_clkdm",
-	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "dpll_core_m4_div2_ck",
 	.prcm		= {
 		.omap4	= {
@@ -1278,8 +1278,21 @@ static struct omap_hwmod am33xx_spi1_hwmod = {
  * spinlock provides hardware assistance for synchronizing the
  * processes running on multiple processors
  */
+
+static struct omap_hwmod_class_sysconfig am33xx_spinlock_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
 static struct omap_hwmod_class am33xx_spinlock_hwmod_class = {
 	.name		= "spinlock",
+	.sysc		= &am33xx_spinlock_sysc,
 };
 
 static struct omap_hwmod am33xx_spinlock_hwmod = {
@@ -2480,6 +2493,41 @@ static struct omap_hwmod_ocp_if am33xx_l3_main__aes0 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* rng */
+static struct omap_hwmod_class_sysconfig am33xx_rng_sysc = {
+	.rev_offs	= 0x1fe0,
+	.sysc_offs	= 0x1fe4,
+	.sysc_flags	= SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE,
+	.idlemodes	= SIDLE_FORCE | SIDLE_NO,
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am33xx_rng_hwmod_class = {
+	.name		= "rng",
+	.sysc		= &am33xx_rng_sysc,
+};
+
+static struct omap_hwmod am33xx_rng_hwmod = {
+	.name		= "rng",
+	.class		= &am33xx_rng_hwmod_class,
+	.clkdm_name	= "l4ls_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE,
+	.main_clk	= "rng_fck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs	= AM33XX_CM_PER_RNG_CLKCTRL_OFFSET,
+			.modulemode	= MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_per__rng = {
+	.master		= &am33xx_l4_ls_hwmod,
+	.slave		= &am33xx_rng_hwmod,
+	.clk		= "rng_fck",
+	.user		= OCP_USER_MPU,
+};
+
 static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = {
 	&am33xx_l3_main__emif,
 	&am33xx_mpu__l3_main,
@@ -2559,6 +2607,7 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = {
 	&am33xx_cpgmac0__mdio,
 	&am33xx_l3_main__sha0,
 	&am33xx_l3_main__aes0,
+	&am33xx_l4_per__rng,
 	NULL,
 };
 

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -3693,6 +3693,53 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__aes = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/*
+ * 'ssi' class
+ * synchronous serial interface (multichannel and full-duplex serial if)
+ */
+
+static struct omap_hwmod_class_sysconfig omap34xx_ssi_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_EMUFREE |
+			   SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap34xx_ssi_hwmod_class = {
+	.name	= "ssi",
+	.sysc	= &omap34xx_ssi_sysc,
+};
+
+static struct omap_hwmod omap34xx_ssi_hwmod = {
+	.name		= "ssi",
+	.class		= &omap34xx_ssi_hwmod_class,
+	.clkdm_name	= "core_l4_clkdm",
+	.main_clk	= "ssi_ssr_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id		= 1,
+			.module_bit		= OMAP3430_EN_SSI_SHIFT,
+			.module_offs		= CORE_MOD,
+			.idlest_reg_id		= 1,
+			.idlest_idle_bit	= OMAP3430ES2_ST_SSI_IDLE_SHIFT,
+		},
+	},
+};
+
+/* L4 CORE -> SSI */
+static struct omap_hwmod_ocp_if omap34xx_l4_core__ssi = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap34xx_ssi_hwmod,
+	.clk		= "ssi_ick",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_l3_main__l4_core,
 	&omap3xxx_l3_main__l4_per,
@@ -3818,6 +3865,7 @@ static struct omap_hwmod_ocp_if *omap34xx_hwmod_ocp_ifs[] __initdata = {
 #ifdef CONFIG_OMAP_IOMMU_IVA2
 	&omap3xxx_l3_main__mmu_iva,
 #endif
+	&omap34xx_l4_core__ssi,
 	NULL
 };
 

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -914,7 +914,7 @@ static struct omap_hwmod omap44xx_emif1_hwmod = {
 	.name		= "emif1",
 	.class		= &omap44xx_emif_hwmod_class,
 	.clkdm_name	= "l3_emif_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "ddrphy_ck",
 	.prcm = {
 		.omap4 = {
@@ -930,7 +930,7 @@ static struct omap_hwmod omap44xx_emif2_hwmod = {
 	.name		= "emif2",
 	.class		= &omap44xx_emif_hwmod_class,
 	.clkdm_name	= "l3_emif_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "ddrphy_ck",
 	.prcm = {
 		.omap4 = {
@@ -2193,7 +2193,7 @@ static struct omap_hwmod omap44xx_mpu_hwmod = {
 	.name		= "mpu",
 	.class		= &omap44xx_mpu_hwmod_class,
 	.clkdm_name	= "mpuss_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "dpll_mpu_m2_ck",
 	.prcm = {
 		.omap4 = {

arch/arm/mach-omap2/omap_hwmod_54xx_data.c

@@ -352,7 +352,7 @@ static struct omap_hwmod omap54xx_emif1_hwmod = {
 	.name		= "emif1",
 	.class		= &omap54xx_emif_hwmod_class,
 	.clkdm_name	= "emif_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "dpll_core_h11x2_ck",
 	.prcm = {
 		.omap4 = {
@@ -368,7 +368,7 @@ static struct omap_hwmod omap54xx_emif2_hwmod = {
 	.name		= "emif2",
 	.class		= &omap54xx_emif_hwmod_class,
 	.clkdm_name	= "emif_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "dpll_core_h11x2_ck",
 	.prcm = {
 		.omap4 = {
@@ -1135,7 +1135,7 @@ static struct omap_hwmod omap54xx_mpu_hwmod = {
 	.name		= "mpu",
 	.class		= &omap54xx_mpu_hwmod_class,
 	.clkdm_name	= "mpu_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+	.flags		= HWMOD_INIT_NO_IDLE,
 	.main_clk	= "dpll_mpu_m2_ck",
 	.prcm = {
 		.omap4 = {
@@ -1145,6 +1145,41 @@ static struct omap_hwmod omap54xx_mpu_hwmod = {
 	},
 };
 
+/*
+ * 'spinlock' class
+ * spinlock provides hardware assistance for synchronizing the processes
+ * running on multiple processors
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_spinlock_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap54xx_spinlock_hwmod_class = {
+	.name	= "spinlock",
+	.sysc	= &omap54xx_spinlock_sysc,
+};
+
+/* spinlock */
+static struct omap_hwmod omap54xx_spinlock_hwmod = {
+	.name		= "spinlock",
+	.class		= &omap54xx_spinlock_hwmod_class,
+	.clkdm_name	= "l4cfg_clkdm",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP54XX_CM_L4CFG_SPINLOCK_CLKCTRL_OFFSET,
+			.context_offs = OMAP54XX_RM_L4CFG_SPINLOCK_CONTEXT_OFFSET,
+		},
+	},
+};
+
 /*
  * 'timer' class
  * general purpose timer module with accurate 1ms tick
@@ -1464,6 +1499,123 @@ static struct omap_hwmod omap54xx_uart6_hwmod = {
 	},
 };
 
+/*
+ * 'usb_host_hs' class
+ * high-speed multi-port usb host controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_usb_host_hs_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class omap54xx_usb_host_hs_hwmod_class = {
+	.name	= "usb_host_hs",
+	.sysc	= &omap54xx_usb_host_hs_sysc,
+};
+
+static struct omap_hwmod omap54xx_usb_host_hs_hwmod = {
+	.name		= "usb_host_hs",
+	.class		= &omap54xx_usb_host_hs_hwmod_class,
+	.clkdm_name	= "l3init_clkdm",
+	/*
+	 * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
+	 * id: i660
+	 *
+	 * Description:
+	 * In the following configuration :
+	 * - USBHOST module is set to smart-idle mode
+	 * - PRCM asserts idle_req to the USBHOST module ( This typically
+	 *   happens when the system is going to a low power mode : all ports
+	 *   have been suspended, the master part of the USBHOST module has
+	 *   entered the standby state, and SW has cut the functional clocks)
+	 * - an USBHOST interrupt occurs before the module is able to answer
+	 *   idle_ack, typically a remote wakeup IRQ.
+	 * Then the USB HOST module will enter a deadlock situation where it
+	 * is no more accessible nor functional.
+	 *
+	 * Workaround:
+	 * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE
+	 */
+
+	/*
+	 * Errata: USB host EHCI may stall when entering smart-standby mode
+	 * Id: i571
+	 *
+	 * Description:
+	 * When the USBHOST module is set to smart-standby mode, and when it is
+	 * ready to enter the standby state (i.e. all ports are suspended and
+	 * all attached devices are in suspend mode), then it can wrongly assert
+	 * the Mstandby signal too early while there are still some residual OCP
+	 * transactions ongoing. If this condition occurs, the internal state
+	 * machine may go to an undefined state and the USB link may be stuck
+	 * upon the next resume.
+	 *
+	 * Workaround:
+	 * Don't use smart standby; use only force standby,
+	 * hence HWMOD_SWSUP_MSTANDBY
+	 */
+
+	/*
+	 * During system boot; If the hwmod framework resets the module
+	 * the module will have smart idle settings; which can lead to deadlock
+	 * (above Errata Id:i660); so, dont reset the module during boot;
+	 * Use HWMOD_INIT_NO_RESET.
+	 */
+
+	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
+			  HWMOD_INIT_NO_RESET,
+	.main_clk	= "l3init_60m_fclk",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP54XX_CM_L3INIT_USB_HOST_HS_CLKCTRL_OFFSET,
+			.context_offs = OMAP54XX_RM_L3INIT_USB_HOST_HS_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/*
+ * 'usb_tll_hs' class
+ * usb_tll_hs module is the adapter on the usb_host_hs ports
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_usb_tll_hs_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap54xx_usb_tll_hs_hwmod_class = {
+	.name	= "usb_tll_hs",
+	.sysc	= &omap54xx_usb_tll_hs_sysc,
+};
+
+static struct omap_hwmod omap54xx_usb_tll_hs_hwmod = {
+	.name		= "usb_tll_hs",
+	.class		= &omap54xx_usb_tll_hs_hwmod_class,
+	.clkdm_name	= "l3init_clkdm",
+	.main_clk	= "l4_root_clk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP54XX_CM_L3INIT_USB_TLL_HS_CLKCTRL_OFFSET,
+			.context_offs = OMAP54XX_RM_L3INIT_USB_TLL_HS_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
 /*
  * 'usb_otg_ss' class
  * 2.0 super speed (usb_otg_ss) controller
@@ -1960,6 +2112,14 @@ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mpu = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* l4_cfg -> spinlock */
+static struct omap_hwmod_ocp_if omap54xx_l4_cfg__spinlock = {
+	.master		= &omap54xx_l4_cfg_hwmod,
+	.slave		= &omap54xx_spinlock_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* l4_wkup -> timer1 */
 static struct omap_hwmod_ocp_if omap54xx_l4_wkup__timer1 = {
 	.master		= &omap54xx_l4_wkup_hwmod,
@@ -2096,6 +2256,22 @@ static struct omap_hwmod_ocp_if omap54xx_l4_per__uart6 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* l4_cfg -> usb_host_hs */
+static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_host_hs = {
+	.master		= &omap54xx_l4_cfg_hwmod,
+	.slave		= &omap54xx_usb_host_hs_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> usb_tll_hs */
+static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_tll_hs = {
+	.master		= &omap54xx_l4_cfg_hwmod,
+	.slave		= &omap54xx_usb_tll_hs_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* l4_cfg -> usb_otg_ss */
 static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_otg_ss = {
 	.master		= &omap54xx_l4_cfg_hwmod,
@@ -2163,6 +2339,7 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
 	&omap54xx_l4_per__mmc4,
 	&omap54xx_l4_per__mmc5,
 	&omap54xx_l4_cfg__mpu,
+	&omap54xx_l4_cfg__spinlock,
 	&omap54xx_l4_wkup__timer1,
 	&omap54xx_l4_per__timer2,
 	&omap54xx_l4_per__timer3,
@@ -2180,6 +2357,8 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
 	&omap54xx_l4_per__uart4,
 	&omap54xx_l4_per__uart5,
 	&omap54xx_l4_per__uart6,
+	&omap54xx_l4_cfg__usb_host_hs,
+	&omap54xx_l4_cfg__usb_tll_hs,
 	&omap54xx_l4_cfg__usb_otg_ss,
 	&omap54xx_l4_wkup__wd_timer2,
 	NULL,