提交 ed79ba9e 编写于 作者: B Benjamin Herrenschmidt

powerpc/powernv: Machine check and other system interrupts

OPAL can handle various interrupt for us such as Machine Checks (it
performs all sorts of recovery tasks and passes back control to us with
informations about the error), Hardware Management Interrupts and Softpatch
interrupts.

This wires up the mechanisms and prints out specific informations returned
by HAL when a machine check occurs.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
上级 a125e092
......@@ -436,6 +436,8 @@ extern void opal_get_rtc_time(struct rtc_time *tm);
extern unsigned long opal_get_boot_time(void);
extern void opal_nvram_init(void);
extern int opal_machine_check(struct pt_regs *regs);
#endif /* __ASSEMBLY__ */
#endif /* __OPAL_H */
......@@ -43,6 +43,7 @@ extern unsigned int debug_smp_processor_id(void); /* from linux/smp.h */
#define get_slb_shadow() (get_paca()->slb_shadow_ptr)
struct task_struct;
struct opal_machine_check_event;
/*
* Defines the layout of the paca.
......@@ -135,6 +136,13 @@ struct paca_struct {
u8 io_sync; /* writel() needs spin_unlock sync */
u8 irq_work_pending; /* IRQ_WORK interrupt while soft-disable */
#ifdef CONFIG_PPC_POWERNV
/* Pointer to OPAL machine check event structure set by the
* early exception handler for use by high level C handler
*/
struct opal_machine_check_event *opal_mc_evt;
#endif
/* Stuff for accurate time accounting */
u64 user_time; /* accumulated usermode TB ticks */
u64 system_time; /* accumulated system TB ticks */
......
......@@ -48,6 +48,9 @@
#ifdef CONFIG_PPC_ISERIES
#include <asm/iseries/alpaca.h>
#endif
#ifdef CONFIG_PPC_POWERNV
#include <asm/opal.h>
#endif
#if defined(CONFIG_KVM) || defined(CONFIG_KVM_GUEST)
#include <linux/kvm_host.h>
#endif
......@@ -609,5 +612,12 @@ int main(void)
arch.timing_last_enter.tv32.tbl));
#endif
#ifdef CONFIG_PPC_POWERNV
DEFINE(OPAL_MC_GPR3, offsetof(struct opal_machine_check_event, gpr3));
DEFINE(OPAL_MC_SRR0, offsetof(struct opal_machine_check_event, srr0));
DEFINE(OPAL_MC_SRR1, offsetof(struct opal_machine_check_event, srr1));
DEFINE(PACA_OPAL_MC_EVT, offsetof(struct paca_struct, opal_mc_evt));
#endif
return 0;
}
......@@ -1143,7 +1143,7 @@ _GLOBAL(do_stab_bolted)
rfid
b . /* prevent speculative execution */
#ifdef CONFIG_PPC_PSERIES
#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
/*
* Data area reserved for FWNMI option.
* This address (0x7000) is fixed by the RPA.
......@@ -1151,7 +1151,7 @@ _GLOBAL(do_stab_bolted)
.= 0x7000
.globl fwnmi_data_area
fwnmi_data_area:
#endif /* CONFIG_PPC_PSERIES */
#endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */
/* iSeries does not use the FWNMI stuff, so it is safe to put
* this here, even if we later allow kernels that will boot on
......@@ -1176,9 +1176,12 @@ xLparMap:
#endif /* CONFIG_PPC_ISERIES */
#ifdef CONFIG_PPC_PSERIES
#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
/* pseries and powernv need to keep the whole page from
* 0x7000 to 0x8000 free for use by the firmware
*/
. = 0x8000
#endif /* CONFIG_PPC_PSERIES */
#endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */
/*
* Space for CPU0's segment table.
......@@ -1193,3 +1196,19 @@ xLparMap:
.globl initial_stab
initial_stab:
.space 4096
#ifdef CONFIG_PPC_POWERNV
_GLOBAL(opal_mc_secondary_handler)
HMT_MEDIUM
SET_SCRATCH0(r13)
GET_PACA(r13)
clrldi r3,r3,2
tovirt(r3,r3)
std r3,PACA_OPAL_MC_EVT(r13)
ld r13,OPAL_MC_SRR0(r3)
mtspr SPRN_SRR0,r13
ld r13,OPAL_MC_SRR1(r3)
mtspr SPRN_SRR1,r13
ld r3,OPAL_MC_GPR3(r3)
GET_SCRATCH0(r13)
b machine_check_pSeries
#endif /* CONFIG_PPC_POWERNV */
......@@ -27,12 +27,14 @@ struct opal {
static struct device_node *opal_node;
static DEFINE_SPINLOCK(opal_write_lock);
extern u64 opal_mc_secondary_handler[];
int __init early_init_dt_scan_opal(unsigned long node,
const char *uname, int depth, void *data)
{
const void *basep, *entryp;
unsigned long basesz, entrysz;
u64 glue;
if (depth != 1 || strcmp(uname, "ibm,opal") != 0)
return 0;
......@@ -59,6 +61,19 @@ int __init early_init_dt_scan_opal(unsigned long node,
printk("OPAL V1 detected !\n");
}
/* Hookup some exception handlers. We use the fwnmi area at 0x7000
* to provide the glue space to OPAL
*/
glue = 0x7000;
opal_register_exception_handler(OPAL_MACHINE_CHECK_HANDLER,
__pa(opal_mc_secondary_handler[0]),
glue);
glue += 128;
opal_register_exception_handler(OPAL_HYPERVISOR_MAINTENANCE_HANDLER,
0, glue);
glue += 128;
opal_register_exception_handler(OPAL_SOFTPATCH_HANDLER, 0, glue);
return 1;
}
......@@ -136,6 +151,121 @@ int opal_put_chars(uint32_t vtermno, const char *data, int total_len)
return written;
}
int opal_machine_check(struct pt_regs *regs)
{
struct opal_machine_check_event *opal_evt = get_paca()->opal_mc_evt;
struct opal_machine_check_event evt;
const char *level, *sevstr, *subtype;
static const char *opal_mc_ue_types[] = {
"Indeterminate",
"Instruction fetch",
"Page table walk ifetch",
"Load/Store",
"Page table walk Load/Store",
};
static const char *opal_mc_slb_types[] = {
"Indeterminate",
"Parity",
"Multihit",
};
static const char *opal_mc_erat_types[] = {
"Indeterminate",
"Parity",
"Multihit",
};
static const char *opal_mc_tlb_types[] = {
"Indeterminate",
"Parity",
"Multihit",
};
/* Copy the event structure and release the original */
evt = *opal_evt;
opal_evt->in_use = 0;
/* Print things out */
if (evt.version != OpalMCE_V1) {
pr_err("Machine Check Exception, Unknown event version %d !\n",
evt.version);
return 0;
}
switch(evt.severity) {
case OpalMCE_SEV_NO_ERROR:
level = KERN_INFO;
sevstr = "Harmless";
break;
case OpalMCE_SEV_WARNING:
level = KERN_WARNING;
sevstr = "";
break;
case OpalMCE_SEV_ERROR_SYNC:
level = KERN_ERR;
sevstr = "Severe";
break;
case OpalMCE_SEV_FATAL:
default:
level = KERN_ERR;
sevstr = "Fatal";
break;
}
printk("%s%s Machine check interrupt [%s]\n", level, sevstr,
evt.disposition == OpalMCE_DISPOSITION_RECOVERED ?
"Recovered" : "[Not recovered");
printk("%s Initiator: %s\n", level,
evt.initiator == OpalMCE_INITIATOR_CPU ? "CPU" : "Unknown");
switch(evt.error_type) {
case OpalMCE_ERROR_TYPE_UE:
subtype = evt.u.ue_error.ue_error_type <
ARRAY_SIZE(opal_mc_ue_types) ?
opal_mc_ue_types[evt.u.ue_error.ue_error_type]
: "Unknown";
printk("%s Error type: UE [%s]\n", level, subtype);
if (evt.u.ue_error.effective_address_provided)
printk("%s Effective address: %016llx\n",
level, evt.u.ue_error.effective_address);
if (evt.u.ue_error.physical_address_provided)
printk("%s Physial address: %016llx\n",
level, evt.u.ue_error.physical_address);
break;
case OpalMCE_ERROR_TYPE_SLB:
subtype = evt.u.slb_error.slb_error_type <
ARRAY_SIZE(opal_mc_slb_types) ?
opal_mc_slb_types[evt.u.slb_error.slb_error_type]
: "Unknown";
printk("%s Error type: SLB [%s]\n", level, subtype);
if (evt.u.slb_error.effective_address_provided)
printk("%s Effective address: %016llx\n",
level, evt.u.slb_error.effective_address);
break;
case OpalMCE_ERROR_TYPE_ERAT:
subtype = evt.u.erat_error.erat_error_type <
ARRAY_SIZE(opal_mc_erat_types) ?
opal_mc_erat_types[evt.u.erat_error.erat_error_type]
: "Unknown";
printk("%s Error type: ERAT [%s]\n", level, subtype);
if (evt.u.erat_error.effective_address_provided)
printk("%s Effective address: %016llx\n",
level, evt.u.erat_error.effective_address);
break;
case OpalMCE_ERROR_TYPE_TLB:
subtype = evt.u.tlb_error.tlb_error_type <
ARRAY_SIZE(opal_mc_tlb_types) ?
opal_mc_tlb_types[evt.u.tlb_error.tlb_error_type]
: "Unknown";
printk("%s Error type: TLB [%s]\n", level, subtype);
if (evt.u.tlb_error.effective_address_provided)
printk("%s Effective address: %016llx\n",
level, evt.u.tlb_error.effective_address);
break;
default:
case OpalMCE_ERROR_TYPE_UNKNOWN:
printk("%s Error type: Unknown\n", level);
break;
}
return evt.severity == OpalMCE_SEV_FATAL ? 0 : 1;
}
static irqreturn_t opal_interrupt(int irq, void *data)
{
uint64_t events;
......
......@@ -141,6 +141,7 @@ static void __init pnv_setup_machdep_opal(void)
ppc_md.restart = pnv_restart;
ppc_md.power_off = pnv_power_off;
ppc_md.halt = pnv_halt;
ppc_md.machine_check_exception = opal_machine_check;
}
#ifdef CONFIG_PPC_POWERNV_RTAS
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册