USB: Fix unusual_devs.h ordering

This patch fixes ordering problems with entries in unusual_devs.h.
Signed-off-by: NPhil Dibowitz <phil@ipom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

drivers/usb/storage/unusual_devs.h

@@ -401,6 +401,14 @@ UNUSUAL_DEV(  0x04a5, 0x3010, 0x0100, 0x0100,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
+#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
+UNUSUAL_DEV(  0x04b4, 0x6830, 0x0000, 0x9999,
+		"Cypress",
+		"Cypress AT2LP",
+		US_SC_CYP_ATACB, US_PR_BULK, NULL,
+		0),
+#endif
+
 /* Reported by Simon Levitt <simon@whattf.com>
  * This entry needs Sub and Proto fields */
 UNUSUAL_DEV(  0x04b8, 0x0601, 0x0100, 0x0100,
@@ -539,17 +547,6 @@ UNUSUAL_DEV(  0x04e6, 0x0101, 0x0200, 0x0200,
 		"CD-RW Device",
 		US_SC_8020, US_PR_CB, NULL, 0),
 
-/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
- * Device uses standards-violating 32-byte Bulk Command Block Wrappers and
- * reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011.
- */
-
-UNUSUAL_DEV(  0x04fc, 0x80c2, 0x0100, 0x0100,
-		"Kobian Mercury",
-		"Binocam DCB-132",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
-		US_FL_BULK32),
-
 #ifdef CONFIG_USB_STORAGE_USBAT
 UNUSUAL_DEV(  0x04e6, 0x1010, 0x0000, 0x9999,
 		"Shuttle/SCM",
@@ -565,6 +562,16 @@ UNUSUAL_DEV(  0x04e8, 0x507c, 0x0220, 0x0220,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_MAX_SECTORS_64),
 
+/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
+ * Device uses standards-violating 32-byte Bulk Command Block Wrappers and
+ * reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011.
+ */
+UNUSUAL_DEV(  0x04fc, 0x80c2, 0x0100, 0x0100,
+		"Kobian Mercury",
+		"Binocam DCB-132",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_BULK32),
+
 /* Reported by Bob Sass <rls@vectordb.com> -- only rev 1.33 tested */
 UNUSUAL_DEV(  0x050d, 0x0115, 0x0133, 0x0133,
 		"Belkin",
@@ -1361,13 +1368,6 @@ UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY),
 
-/* Reported by Rohan Hart <rohan.hart17@gmail.com> */
-UNUSUAL_DEV(  0x2770, 0x915d, 0x0010, 0x0010,
-		"INTOVA",
-		"Pixtreme",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
-		US_FL_FIX_CAPACITY ),
-
 /*
  * Entry for Jenoptik JD 5200z3
  *
@@ -1731,6 +1731,13 @@ UNUSUAL_DEV(  0x2735, 0x100b, 0x0000, 0x9999,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_GO_SLOW ),
 
+/* Reported by Rohan Hart <rohan.hart17@gmail.com> */
+UNUSUAL_DEV(  0x2770, 0x915d, 0x0010, 0x0010,
+		"INTOVA",
+		"Pixtreme",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY ),
+
 /*
  * David Härdeman <david@2gen.com>
  * The key makes the SCSI stack print confusing (but harmless) messages
@@ -1755,14 +1762,6 @@ UNUSUAL_DEV(  0xed06, 0x4500, 0x0001, 0x0001,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_CAPACITY_HEURISTICS),
 
-#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
-UNUSUAL_DEV(  0x04b4, 0x6830, 0x0000, 0x9999,
-		"Cypress",
-		"Cypress AT2LP",
-		US_SC_CYP_ATACB, US_PR_BULK, NULL,
-		0),
-#endif
-
 /* Control/Bulk transport for all SubClass values */
 USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR),
 USUAL_DEV(US_SC_8020, US_PR_CB, USB_US_TYPE_STOR),