net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac

Part 1:
 Introduce basic CPSW dual_mac driver (cpsw_new.c) which is operating in
dual-emac mode by default, thus working as 2 individual network interfaces.
Main differences from legacy CPSW driver are:

 - optimized promiscuous mode: The P0_UNI_FLOOD (both ports) is enabled in
addition to ALLMULTI (current port) instead of ALE_BYPASS. So, Ports in
promiscuous mode will keep possibility of mcast and vlan filtering, which
is provides significant benefits when ports are joined to the same bridge,
but without enabling "switch" mode, or to different bridges.
 - learning disabled on ports as it make not too much sense for
   segregated ports - no forwarding in HW.
 - enabled basic support for devlink.

	devlink dev show
		platform/48484000.switch

	devlink dev param show
	 platform/48484000.switch:
	name ale_bypass type driver-specific
	 values:
		cmode runtime value false

 - "ale_bypass" devlink driver parameter allows to enable
ALE_CONTROL(4).BYPASS mode for debug purposes.
 - updated DT bindings.
Signed-off-by: NIlias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/ti/Kconfig

@@ -59,9 +59,24 @@ config TI_CPSW
 	  To compile this driver as a module, choose M here: the module
 	  will be called cpsw.
 
+config TI_CPSW_SWITCHDEV
+	tristate "TI CPSW Switch Support with switchdev"
+	depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || COMPILE_TEST
+	select NET_SWITCHDEV
+	select TI_DAVINCI_MDIO
+	select MFD_SYSCON
+	select REGMAP
+	select NET_DEVLINK
+	imply PHY_TI_GMII_SEL
+	help
+	  This driver supports TI's CPSW Ethernet Switch.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called cpsw_new.
+
 config TI_CPTS
 	bool "TI Common Platform Time Sync (CPTS) Support"
-	depends on TI_CPSW || TI_KEYSTONE_NETCP || COMPILE_TEST
+	depends on TI_CPSW || TI_KEYSTONE_NETCP || TI_CPSW_SWITCHDEV || COMPILE_TEST
 	depends on COMMON_CLK
 	depends on POSIX_TIMERS
 	---help---
@@ -73,7 +88,7 @@ config TI_CPTS
 config TI_CPTS_MOD
 	tristate
 	depends on TI_CPTS
-	default y if TI_CPSW=y || TI_KEYSTONE_NETCP=y
+	default y if TI_CPSW=y || TI_KEYSTONE_NETCP=y || TI_CPSW_SWITCHDEV=y
 	select NET_PTP_CLASSIFY
 	imply PTP_1588_CLOCK
 	default m

drivers/net/ethernet/ti/Makefile

@@ -15,6 +15,8 @@ obj-$(CONFIG_TI_CPSW_PHY_SEL) += cpsw-phy-sel.o
 obj-$(CONFIG_TI_CPTS_MOD) += cpts.o
 obj-$(CONFIG_TI_CPSW) += ti_cpsw.o
 ti_cpsw-y := cpsw.o davinci_cpdma.o cpsw_ale.o cpsw_priv.o cpsw_sl.o cpsw_ethtool.o
+obj-$(CONFIG_TI_CPSW_SWITCHDEV) += ti_cpsw_new.o
+ti_cpsw_new-y := cpsw_new.o davinci_cpdma.o cpsw_ale.o cpsw_sl.o cpsw_priv.o cpsw_ethtool.o
 
 obj-$(CONFIG_TI_KEYSTONE_NETCP) += keystone_netcp.o
 keystone_netcp-y := netcp_core.o cpsw_ale.o

drivers/net/ethernet/ti/cpsw_priv.c

@@ -13,6 +13,7 @@
 #include <linux/module.h>
 #include <linux/netdevice.h>
 #include <linux/net_tstamp.h>
+#include <linux/of.h>
 #include <linux/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
@@ -422,6 +423,7 @@ int cpsw_init_common(struct cpsw_common *cpsw, void __iomem *ss_regs,
 	struct cpsw_platform_data *data;
 	struct cpdma_params dma_params;
 	struct device *dev = cpsw->dev;
+	struct device_node *cpts_node;
 	void __iomem *cpts_regs;
 	int ret = 0, i;
 
@@ -516,11 +518,16 @@ int cpsw_init_common(struct cpsw_common *cpsw, void __iomem *ss_regs,
 		return -ENOMEM;
 	}
 
-	cpsw->cpts = cpts_create(cpsw->dev, cpts_regs, cpsw->dev->of_node);
+	cpts_node = of_get_child_by_name(cpsw->dev->of_node, "cpts");
+	if (!cpts_node)
+		cpts_node = cpsw->dev->of_node;
+
+	cpsw->cpts = cpts_create(cpsw->dev, cpts_regs, cpts_node);
 	if (IS_ERR(cpsw->cpts)) {
 		ret = PTR_ERR(cpsw->cpts);
 		cpdma_ctlr_destroy(cpsw->dma);
 	}
+	of_node_put(cpts_node);
 
 	return ret;
 }

drivers/net/ethernet/ti/cpsw_priv.h

@@ -54,6 +54,7 @@ do {								\
 
 #define HOST_PORT_NUM		0
 #define CPSW_ALE_PORTS_NUM	3
+#define CPSW_SLAVE_PORTS_NUM	2
 #define SLIVER_SIZE		0x40
 
 #define CPSW1_HOST_PORT_OFFSET	0x028
@@ -65,6 +66,7 @@ do {								\
 #define CPSW1_CPTS_OFFSET	0x500
 #define CPSW1_ALE_OFFSET	0x600
 #define CPSW1_SLIVER_OFFSET	0x700
+#define CPSW1_WR_OFFSET		0x900
 
 #define CPSW2_HOST_PORT_OFFSET	0x108
 #define CPSW2_SLAVE_OFFSET	0x200
@@ -76,6 +78,7 @@ do {								\
 #define CPSW2_ALE_OFFSET	0xd00
 #define CPSW2_SLIVER_OFFSET	0xd80
 #define CPSW2_BD_OFFSET		0x2000
+#define CPSW2_WR_OFFSET		0x1200
 
 #define CPDMA_RXTHRESH		0x0c0
 #define CPDMA_RXFREE		0x0e0
@@ -113,12 +116,15 @@ do {								\
 #define IRQ_NUM			2
 #define CPSW_MAX_QUEUES		8
 #define CPSW_CPDMA_DESCS_POOL_SIZE_DEFAULT 256
+#define CPSW_ALE_AGEOUT_DEFAULT		10 /* sec */
+#define CPSW_ALE_NUM_ENTRIES		1024
 #define CPSW_FIFO_QUEUE_TYPE_SHIFT	16
 #define CPSW_FIFO_SHAPE_EN_SHIFT	16
 #define CPSW_FIFO_RATE_EN_SHIFT		20
 #define CPSW_TC_NUM			4
 #define CPSW_FIFO_SHAPERS_NUM		(CPSW_TC_NUM - 1)
 #define CPSW_PCT_MASK			0x7f
+#define CPSW_BD_RAM_SIZE		0x2000
 
 #define CPSW_RX_VLAN_ENCAP_HDR_PRIO_SHIFT	29
 #define CPSW_RX_VLAN_ENCAP_HDR_PRIO_MSK		GENMASK(2, 0)
@@ -279,6 +285,7 @@ struct cpsw_slave_data {
 	u8		mac_addr[ETH_ALEN];
 	u16		dual_emac_res_vlan;	/* Reserved VLAN for DualEMAC */
 	struct phy	*ifphy;
+	bool		disabled;
 };
 
 struct cpsw_platform_data {
@@ -286,9 +293,9 @@ struct cpsw_platform_data {
 	u32	ss_reg_ofs;	/* Subsystem control register offset */
 	u32	channels;	/* number of cpdma channels (symmetric) */
 	u32	slaves;		/* number of slave cpgmac ports */
-	u32	active_slave; /* time stamping, ethtool and SIOCGMIIPHY slave */
+	u32	active_slave;/* time stamping, ethtool and SIOCGMIIPHY slave */
 	u32	ale_entries;	/* ale table size */
-	u32	bd_ram_size;  /*buffer descriptor ram size */
+	u32	bd_ram_size;	/*buffer descriptor ram size */
 	u32	mac_control;	/* Mac control register */
 	u16	default_vlan;	/* Def VLAN for ALE lookup in VLAN aware mode*/
 	bool	dual_emac;	/* Enable Dual EMAC mode */
@@ -344,6 +351,7 @@ struct cpsw_common {
 	bool				tx_irq_disabled;
 	u32 irqs_table[IRQ_NUM];
 	struct cpts			*cpts;
+	struct devlink *devlink;
 	int				rx_ch_num, tx_ch_num;
 	int				speed;
 	int				usage_count;