tg3: Reset the phy to allow modified EEE settings to take effect

When LFA is enabled, we don't reset the phy. But EEE settings changes
don't take effect until the phy is reset. Add a phy reset when we detect
a changed EEE setting.
Signed-off-by: NNithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/tg3.c

@@ -4491,6 +4491,32 @@ static int tg3_init_5401phy_dsp(struct tg3 *tp)
 	return err;
 }
 
+static bool tg3_phy_eee_config_ok(struct tg3 *tp)
+{
+	u32 val;
+	u32 tgtadv = 0;
+	u32 advertising = tp->link_config.advertising;
+
+	if (!(tp->phy_flags & TG3_PHYFLG_EEE_CAP))
+		return true;
+
+	if (tg3_phy_cl45_read(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV, &val))
+		return false;
+
+	val &= (MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T);
+
+
+	if (advertising & ADVERTISED_100baseT_Full)
+		tgtadv |= MDIO_AN_EEE_ADV_100TX;
+	if (advertising & ADVERTISED_1000baseT_Full)
+		tgtadv |= MDIO_AN_EEE_ADV_1000T;
+
+	if (val != tgtadv)
+		return false;
+
+	return true;
+}
+
 static bool tg3_phy_copper_an_config_ok(struct tg3 *tp, u32 *lcladv)
 {
 	u32 advmsk, tgtadv, advertising;
@@ -4739,10 +4765,22 @@ static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset)
 		tp->link_config.active_duplex = current_duplex;
 
 		if (tp->link_config.autoneg == AUTONEG_ENABLE) {
+			bool eee_config_ok = tg3_phy_eee_config_ok(tp);
+
 			if ((bmcr & BMCR_ANENABLE) &&
+			    eee_config_ok &&
 			    tg3_phy_copper_an_config_ok(tp, &lcl_adv) &&
 			    tg3_phy_copper_fetch_rmtadv(tp, &rmt_adv))
 				current_link_up = 1;
+
+			/* EEE settings changes take effect only after a phy
+			 * reset.  If we have skipped a reset due to Link Flap
+			 * Avoidance being enabled, do it now.
+			 */
+			if (!eee_config_ok &&
+			    (tp->phy_flags & TG3_PHYFLG_KEEP_LINK_ON_PWRDN) &&
+			    !force_reset)
+				tg3_phy_reset(tp);
 		} else {
 			if (!(bmcr & BMCR_ANENABLE) &&
 			    tp->link_config.speed == current_speed &&