selftest/bpf: Make xsk tests less verbose

Make the xsk tests less verbose by only printing the
essentials. Currently, it is hard to see if the tests passed or not
due to all the printouts. Move the extra printouts to a verbose
option, if further debugging is needed when a problem arises.

To run the xsk tests with verbose output:
./test_xsk.sh -v
Signed-off-by: NMagnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: NCiara Loftus <ciara.loftus@intel.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210223162304.7450-2-ciara.loftus@intel.com

tools/testing/selftests/bpf/test_xsk.sh

@@ -71,13 +71,17 @@
 #
 # Run (full output without color-coding):
 #   sudo ./test_xsk.sh
+#
+# Run with verbose output:
+#   sudo ./test_xsk.sh -v
 
 . xsk_prereqs.sh
 
-while getopts c flag
+while getopts "cv" flag
 do
 	case "${flag}" in
 		c) colorconsole=1;;
+		v) verbose=1;;
 	esac
 done
 
@@ -95,13 +99,17 @@ NS1=af_xdp${VETH1_POSTFIX}
 MTU=1500
 
 setup_vethPairs() {
-	echo "setting up ${VETH0}: namespace: ${NS0}"
+	if [[ $verbose -eq 1 ]]; then
+	        echo "setting up ${VETH0}: namespace: ${NS0}"
+	fi
 	ip netns add ${NS1}
 	ip link add ${VETH0} type veth peer name ${VETH1}
 	if [ -f /proc/net/if_inet6 ]; then
 		echo 1 > /proc/sys/net/ipv6/conf/${VETH0}/disable_ipv6
 	fi
-	echo "setting up ${VETH1}: namespace: ${NS1}"
+	if [[ $verbose -eq 1 ]]; then
+	        echo "setting up ${VETH1}: namespace: ${NS1}"
+	fi
 	ip link set ${VETH1} netns ${NS1}
 	ip netns exec ${NS1} ip link set ${VETH1} mtu ${MTU}
 	ip link set ${VETH0} mtu ${MTU}
@@ -125,7 +133,10 @@ echo "${VETH0}:${VETH1},${NS1}" > ${SPECFILE}
 
 validate_veth_spec_file
 
-echo "Spec file created: ${SPECFILE}"
+if [[ $verbose -eq 1 ]]; then
+        echo "Spec file created: ${SPECFILE}"
+	VERBOSE_ARG="-v"
+fi
 
 test_status $retval "${TEST_NAME}"
 
@@ -136,12 +147,16 @@ statusList=()
 ### TEST 1
 TEST_NAME="XSK KSELFTEST FRAMEWORK"
 
-echo "Switching interfaces [${VETH0}, ${VETH1}] to XDP Generic mode"
+if [[ $verbose -eq 1 ]]; then
+        echo "Switching interfaces [${VETH0}, ${VETH1}] to XDP Generic mode"
+fi
 vethXDPgeneric ${VETH0} ${VETH1} ${NS1}
 
 retval=$?
 if [ $retval -eq 0 ]; then
-	echo "Switching interfaces [${VETH0}, ${VETH1}] to XDP Native mode"
+        if [[ $verbose -eq 1 ]]; then
+	        echo "Switching interfaces [${VETH0}, ${VETH1}] to XDP Native mode"
+	fi
 	vethXDPnative ${VETH0} ${VETH1} ${NS1}
 fi
 

tools/testing/selftests/bpf/xdpxceiver.c

@@ -341,6 +341,7 @@ static struct option long_options[] = {
 	{"tear-down", no_argument, 0, 'T'},
 	{"bidi", optional_argument, 0, 'B'},
 	{"debug", optional_argument, 0, 'D'},
+	{"verbose", no_argument, 0, 'v'},
 	{"tx-pkt-count", optional_argument, 0, 'C'},
 	{0, 0, 0, 0}
 };
@@ -359,6 +360,7 @@ static void usage(const char *prog)
 	    "  -T, --tear-down      Tear down sockets by repeatedly recreating them\n"
 	    "  -B, --bidi           Bi-directional sockets test\n"
 	    "  -D, --debug          Debug mode - dump packets L2 - L5\n"
+	    "  -v, --verbose        Verbose output\n"
 	    "  -C, --tx-pkt-count=n Number of packets to send\n";
 	ksft_print_msg(str, prog);
 }
@@ -392,7 +394,7 @@ static void *nsswitchthread(void *args)
 			ksft_test_result_fail("ERROR: [%s] interface \"%s\" does not exist\n",
 					      __func__, ifdict[targs->idx]->ifname);
 		} else {
-			ksft_print_msg("Interface found: %s\n", ifdict[targs->idx]->ifname);
+			print_verbose("Interface found: %s\n", ifdict[targs->idx]->ifname);
 			targs->retptr = true;
 		}
 	}
@@ -422,7 +424,7 @@ static int validate_interfaces(void)
 			pthread_join(ns_thread, NULL);
 
 			if (targs->retptr)
-				ksft_print_msg("NS switched: %s\n", ifdict[i]->nsname);
+				print_verbose("NS switched: %s\n", ifdict[i]->nsname);
 
 			free(targs);
 		} else {
@@ -432,7 +434,7 @@ static int validate_interfaces(void)
 				    ("ERROR: interface \"%s\" does not exist\n", ifdict[i]->ifname);
 				ret = false;
 			} else {
-				ksft_print_msg("Interface found: %s\n", ifdict[i]->ifname);
+				print_verbose("Interface found: %s\n", ifdict[i]->ifname);
 			}
 		}
 	}
@@ -446,7 +448,7 @@ static void parse_command_line(int argc, char **argv)
 	opterr = 0;
 
 	for (;;) {
-		c = getopt_long(argc, argv, "i:q:pSNcTBDC:", long_options, &option_index);
+		c = getopt_long(argc, argv, "i:q:pSNcTBDC:v", long_options, &option_index);
 
 		if (c == -1)
 			break;
@@ -497,6 +499,9 @@ static void parse_command_line(int argc, char **argv)
 		case 'C':
 			opt_pkt_count = atoi(optarg);
 			break;
+		case 'v':
+			opt_verbose = 1;
+			break;
 		default:
 			usage(basename(argv[0]));
 			ksft_exit_xfail();
@@ -714,7 +719,7 @@ static void worker_pkt_dump(void)
 		int payload = *((uint32_t *)(pkt_buf[iter]->payload + PKT_HDR_SIZE));
 
 		if (payload == EOT) {
-			ksft_print_msg("End-of-transmission frame received\n");
+			print_verbose("End-of-transmission frame received\n");
 			fprintf(stdout, "---------------------------------------\n");
 			break;
 		}
@@ -746,7 +751,7 @@ static void worker_pkt_validate(void)
 			}
 
 			if (payloadseqnum == EOT) {
-				ksft_print_msg("End-of-transmission frame received: PASS\n");
+				print_verbose("End-of-transmission frame received: PASS\n");
 				sigvar = 1;
 				break;
 			}
@@ -836,7 +841,7 @@ static void *worker_testapp_validate(void *arg)
 			usleep(USLEEP_MAX);
 		}
 
-		ksft_print_msg("Interface [%s] vector [Tx]\n", ifobject->ifname);
+		print_verbose("Interface [%s] vector [Tx]\n", ifobject->ifname);
 		for (int i = 0; i < num_frames; i++) {
 			/*send EOT frame */
 			if (i == (num_frames - 1))
@@ -850,7 +855,7 @@ static void *worker_testapp_validate(void *arg)
 			gen_eth_frame(ifobject->umem, i * XSK_UMEM__DEFAULT_FRAME_SIZE);
 		}
 
-		ksft_print_msg("Sending %d packets on interface %s\n",
+		print_verbose("Sending %d packets on interface %s\n",
 			       (opt_pkt_count - 1), ifobject->ifname);
 		tx_only_all(ifobject);
 	} else if (ifobject->fv.vector == rx) {
@@ -860,7 +865,7 @@ static void *worker_testapp_validate(void *arg)
 		if (!bidi_pass)
 			thread_common_ops(ifobject, bufs, &sync_mutex_tx, &spinning_rx);
 
-		ksft_print_msg("Interface [%s] vector [Rx]\n", ifobject->ifname);
+		print_verbose("Interface [%s] vector [Rx]\n", ifobject->ifname);
 		xsk_populate_fill_ring(ifobject->umem);
 
 		TAILQ_INIT(&head);
@@ -890,11 +895,11 @@ static void *worker_testapp_validate(void *arg)
 				break;
 		}
 
-		ksft_print_msg("Received %d packets on interface %s\n",
+		print_verbose("Received %d packets on interface %s\n",
 			       pkt_counter, ifobject->ifname);
 
 		if (opt_teardown)
-			ksft_print_msg("Destroying socket\n");
+			print_verbose("Destroying socket\n");
 	}
 
 	if (!opt_bidi || bidi_pass) {
@@ -914,7 +919,7 @@ static void testapp_validate(void)
 	if (opt_bidi && bidi_pass) {
 		pthread_init_mutex();
 		if (!switching_notify) {
-			ksft_print_msg("Switching Tx/Rx vectors\n");
+			print_verbose("Switching Tx/Rx vectors\n");
 			switching_notify++;
 		}
 	}
@@ -974,7 +979,7 @@ static void testapp_sockets(void)
 		pkt_counter = 0;
 		prev_pkt = -1;
 		sigvar = 0;
-		ksft_print_msg("Creating socket\n");
+		print_verbose("Creating socket\n");
 		testapp_validate();
 		opt_bidi ? bidi_pass++ : bidi_pass;
 	}

tools/testing/selftests/bpf/xdpxceiver.h

@@ -42,6 +42,8 @@
 #define POLL_TMOUT 1000
 #define NEED_WAKEUP true
 
+#define print_verbose(x...) do { if (opt_verbose) ksft_print_msg(x); } while (0)
+
 typedef __u32 u32;
 typedef __u16 u16;
 typedef __u8 u8;
@@ -51,11 +53,11 @@ enum TESTS {
 	ORDER_CONTENT_VALIDATE_XDP_DRV = 1,
 };
 
-u8 uut;
-u8 debug_pkt_dump;
-u32 num_frames;
-u8 switching_notify;
-u8 bidi_pass;
+static u8 uut;
+static u8 debug_pkt_dump;
+static u32 num_frames;
+static u8 switching_notify;
+static u8 bidi_pass;
 
 static u32 opt_xdp_flags = XDP_FLAGS_UPDATE_IF_NOEXIST;
 static int opt_queue;
@@ -64,6 +66,7 @@ static int opt_poll;
 static int opt_teardown;
 static int opt_bidi;
 static u32 opt_xdp_bind_flags = XDP_USE_NEED_WAKEUP;
+static u8 opt_verbose;
 static u8 pkt_data[XSK_UMEM__DEFAULT_FRAME_SIZE];
 static u32 pkt_counter;
 static u32 prev_pkt = -1;

tools/testing/selftests/bpf/xsk_prereqs.sh

@@ -82,24 +82,21 @@ clear_configs()
 {
 	if [ $(ip netns show | grep $3 &>/dev/null; echo $?;) == 0 ]; then
 		[ $(ip netns exec $3 ip link show $2 &>/dev/null; echo $?;) == 0 ] &&
-			{ echo "removing link $1:$2"; ip netns exec $3 ip link del $2; }
-		echo "removing ns $3"
+			{ ip netns exec $3 ip link del $2; }
 		ip netns del $3
 	fi
 	#Once we delete a veth pair node, the entire veth pair is removed,
 	#this is just to be cautious just incase the NS does not exist then
 	#veth node inside NS won't get removed so we explicitly remove it
 	[ $(ip link show $1 &>/dev/null; echo $?;) == 0 ] &&
-		{ echo "removing link $1"; ip link del $1; }
+		{ ip link del $1; }
 	if [ -f ${SPECFILE} ]; then
-		echo "removing spec file:" ${SPECFILE}
 		rm -f ${SPECFILE}
 	fi
 }
 
 cleanup_exit()
 {
-	echo "cleaning up..."
 	clear_configs $1 $2 $3
 }
 
@@ -131,5 +128,5 @@ execxdpxceiver()
 			copy[$index]=${!current}
 		done
 
-	./${XSKOBJ} -i ${VETH0} -i ${VETH1},${NS1} ${copy[*]} -C ${NUMPKTS}
+	./${XSKOBJ} -i ${VETH0} -i ${VETH1},${NS1} ${copy[*]} -C ${NUMPKTS} ${VERBOSE_ARG}
 }