ALSA: Fix typo in drivers sound

Correct spelling typo in debug messages within drivers/sound
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

sound/i2c/other/ak4113.c

@@ -426,7 +426,7 @@ static struct snd_kcontrol_new snd_ak4113_iec958_controls[] = {
 },
 {
 	.iface =	SNDRV_CTL_ELEM_IFACE_PCM,
-	.name =		"IEC958 Preample Capture Default",
+	.name =		"IEC958 Preamble Capture Default",
 	.access =	SNDRV_CTL_ELEM_ACCESS_READ |
 		SNDRV_CTL_ELEM_ACCESS_VOLATILE,
 	.info =		snd_ak4113_spdif_pinfo,

sound/i2c/other/ak4114.c

@@ -401,7 +401,7 @@ static struct snd_kcontrol_new snd_ak4114_iec958_controls[] = {
 },
 {
 	.iface =	SNDRV_CTL_ELEM_IFACE_PCM,
-	.name =		"IEC958 Preample Capture Default",
+	.name =		"IEC958 Preamble Capture Default",
 	.access =	SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
 	.info =		snd_ak4114_spdif_pinfo,
 	.get =		snd_ak4114_spdif_pget,

sound/i2c/other/ak4117.c

@@ -380,7 +380,7 @@ static struct snd_kcontrol_new snd_ak4117_iec958_controls[] = {
 },
 {
 	.iface =	SNDRV_CTL_ELEM_IFACE_PCM,
-	.name =		"IEC958 Preample Capture Default",
+	.name =		"IEC958 Preamble Capture Default",
 	.access =	SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
 	.info =		snd_ak4117_spdif_pinfo,
 	.get =		snd_ak4117_spdif_pget,

sound/pci/rme9652/hdspm.c

@@ -4899,7 +4899,7 @@ snd_hdspm_proc_read_madi(struct snd_info_entry * entry,
 		insel = "Coaxial";
 		break;
 	default:
-		insel = "Unkown";
+		insel = "Unknown";
 	}
 
 	snd_iprintf(buffer,

sound/soc/codecs/cs42l52.c

@@ -763,7 +763,7 @@ static int cs42l52_set_sysclk(struct snd_soc_dai *codec_dai,
 	if ((freq >= CS42L52_MIN_CLK) && (freq <= CS42L52_MAX_CLK)) {
 		cs42l52->sysclk = freq;
 	} else {
-		dev_err(codec->dev, "Invalid freq paramter\n");
+		dev_err(codec->dev, "Invalid freq parameter\n");
 		return -EINVAL;
 	}
 	return 0;

sound/soc/codecs/wm8994.c

@@ -3722,7 +3722,7 @@ static irqreturn_t wm8958_mic_irq(int irq, void *data)
 	} while (count--);
 
 	if (count == 0)
-		dev_warn(codec->dev, "No impedence range reported for jack\n");
+		dev_warn(codec->dev, "No impedance range reported for jack\n");
 
 #ifndef CONFIG_SND_SOC_WM8994_MODULE
 	trace_snd_soc_jack_irq(dev_name(codec->dev));