ARM: davinci: move platform_data definitions

Platform data for device drivers should be defined in
include/linux/platform_data/*.h, not in the architecture
and platform specific directories.

This moves such data out of the davinci include directories
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NNicolas Pitre <nico@linaro.org>
Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: NFelipe Balbi <balbi@ti.com>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: "Ben Dooks" <ben-linux@fluff.org>
Cc: "Wolfram Sang" <w.sang@pengutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Chris Ball <cjb@laptop.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Liam Girdwood <lrg@ti.com>
Cc: davinci-linux-open-source@linux.davincidsp.com

arch/arm/mach-davinci/aemif.c

@@ -15,7 +15,7 @@
 #include <linux/module.h>
 #include <linux/time.h>
 
-#include <mach/aemif.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
 
 /* Timing value configuration */
 

arch/arm/mach-davinci/board-da830-evm.c

@@ -28,11 +28,11 @@
 
 #include <mach/cp_intc.h>
 #include <mach/mux.h>
-#include <mach/nand.h>
+#include <linux/platform_data/mtd-davinci.h>
 #include <mach/da8xx.h>
-#include <mach/usb.h>
-#include <mach/aemif.h>
-#include <mach/spi.h>
+#include <linux/platform_data/usb-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
+#include <linux/platform_data/spi-davinci.h>
 
 #define DA830_EVM_PHY_ID		""
 /*

arch/arm/mach-davinci/board-da850-evm.c

@@ -40,10 +40,10 @@
 
 #include <mach/cp_intc.h>
 #include <mach/da8xx.h>
-#include <mach/nand.h>
+#include <linux/platform_data/mtd-davinci.h>
 #include <mach/mux.h>
-#include <mach/aemif.h>
-#include <mach/spi.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
+#include <linux/platform_data/spi-davinci.h>
 
 #define DA850_EVM_PHY_ID		"davinci_mdio-0:00"
 #define DA850_LCD_PWR_PIN		GPIO_TO_PIN(2, 8)

arch/arm/mach-davinci/board-dm355-evm.c

@@ -26,11 +26,11 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
 #include <mach/serial.h>
-#include <mach/nand.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include "davinci.h"
 

arch/arm/mach-davinci/board-dm355-leopard.c

@@ -23,11 +23,11 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
 #include <mach/serial.h>
-#include <mach/nand.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include "davinci.h"
 

arch/arm/mach-davinci/board-dm365-evm.c

@@ -33,11 +33,11 @@
 
 #include <mach/mux.h>
 #include <mach/common.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
 #include <mach/serial.h>
-#include <mach/mmc.h>
-#include <mach/nand.h>
-#include <mach/keyscan.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/keyscan-davinci.h>
 
 #include <media/tvp514x.h>
 

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -31,13 +31,13 @@
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
 #include <mach/serial.h>
 #include <mach/mux.h>
-#include <mach/nand.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
-#include <mach/aemif.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
 
 #include "davinci.h"
 

arch/arm/mach-davinci/board-dm646x-evm.c

@@ -38,11 +38,11 @@
 
 #include <mach/common.h>
 #include <mach/serial.h>
-#include <mach/i2c.h>
-#include <mach/nand.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
 #include <mach/clock.h>
 #include <mach/cdce949.h>
-#include <mach/aemif.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
 
 #include "davinci.h"
 #include "clock.h"

arch/arm/mach-davinci/board-mityomapl138.c

@@ -26,9 +26,9 @@
 #include <mach/common.h>
 #include <mach/cp_intc.h>
 #include <mach/da8xx.h>
-#include <mach/nand.h>
+#include <linux/platform_data/mtd-davinci.h>
 #include <mach/mux.h>
-#include <mach/spi.h>
+#include <linux/platform_data/spi-davinci.h>
 
 #define MITYOMAPL138_PHY_ID		""
 

arch/arm/mach-davinci/board-neuros-osd2.c

@@ -31,12 +31,12 @@
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
 #include <mach/serial.h>
 #include <mach/mux.h>
-#include <mach/nand.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include "davinci.h"
 

arch/arm/mach-davinci/board-sffsdr.c

@@ -36,10 +36,10 @@
 #include <asm/mach/flash.h>
 
 #include <mach/common.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
 #include <mach/serial.h>
 #include <mach/mux.h>
-#include <mach/usb.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include "davinci.h"
 

arch/arm/mach-davinci/davinci.h

@@ -24,7 +24,7 @@
 #include <linux/spi/spi.h>
 
 #include <mach/asp.h>
-#include <mach/keyscan.h>
+#include <linux/platform_data/keyscan-davinci.h>
 #include <mach/hardware.h>
 
 #include <media/davinci/vpfe_capture.h>

arch/arm/mach-davinci/devices.c

@@ -15,12 +15,12 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
 #include <mach/irqs.h>
 #include <mach/cputype.h>
 #include <mach/mux.h>
 #include <mach/edma.h>
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-davinci.h>
 #include <mach/time.h>
 
 #include "davinci.h"

arch/arm/mach-davinci/dm355.c

@@ -27,7 +27,7 @@
 #include <mach/serial.h>
 #include <mach/common.h>
 #include <mach/asp.h>
-#include <mach/spi.h>
+#include <linux/platform_data/spi-davinci.h>
 #include <mach/gpio-davinci.h>
 
 #include "davinci.h"

arch/arm/mach-davinci/dm365.c

@@ -30,8 +30,8 @@
 #include <mach/serial.h>
 #include <mach/common.h>
 #include <mach/asp.h>
-#include <mach/keyscan.h>
-#include <mach/spi.h>
+#include <linux/platform_data/keyscan-davinci.h>
+#include <linux/platform_data/spi-davinci.h>
 #include <mach/gpio-davinci.h>
 
 #include "davinci.h"

arch/arm/mach-davinci/include/mach/da8xx.h

@@ -19,12 +19,12 @@
 
 #include <mach/serial.h>
 #include <mach/edma.h>
-#include <mach/i2c.h>
 #include <mach/asp.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
 #include <mach/pm.h>
-#include <mach/spi.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
+#include <linux/platform_data/spi-davinci.h>
 
 extern void __iomem *da8xx_syscfg0_base;
 extern void __iomem *da8xx_syscfg1_base;

arch/arm/mach-davinci/include/mach/tnetv107x.h

@@ -36,8 +36,8 @@
 #include <linux/input/matrix_keypad.h>
 #include <linux/mfd/ti_ssp.h>
 
-#include <mach/mmc.h>
-#include <mach/nand.h>
+#include <linux/platform_data/mmc-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
 #include <mach/serial.h>
 
 struct tnetv107x_device_info {

arch/arm/mach-davinci/usb.c

@@ -10,7 +10,7 @@
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/cputype.h>
-#include <mach/usb.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #define DAVINCI_USB_OTG_BASE	0x01c64000
 

drivers/i2c/busses/i2c-davinci.c

@@ -40,7 +40,7 @@
 #include <linux/gpio.h>
 
 #include <mach/hardware.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
 
 /* ----- global defines ----------------------------------------------- */
 

drivers/input/keyboard/davinci_keyscan.c

@@ -36,7 +36,7 @@
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <mach/keyscan.h>
+#include <linux/platform_data/keyscan-davinci.h>
 
 /* Key scan registers */
 #define DAVINCI_KEYSCAN_KEYCTRL		0x0000

drivers/media/video/davinci/vpbe_venc.c

@@ -27,7 +27,7 @@
 
 #include <mach/hardware.h>
 #include <mach/mux.h>
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-davinci.h>
 
 #include <linux/io.h>
 

drivers/mmc/host/davinci_mmc.c

@@ -33,7 +33,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/mmc/mmc.h>
 
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-davinci.h>
 #include <mach/edma.h>
 
 /*

drivers/mtd/nand/davinci_nand.c

@@ -34,8 +34,8 @@
 #include <linux/mtd/partitions.h>
 #include <linux/slab.h>
 
-#include <mach/nand.h>
-#include <mach/aemif.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
 
 /*
  * This is a device driver for the NAND flash controller found on the

drivers/spi/spi-davinci.c

@@ -30,7 +30,7 @@
 #include <linux/spi/spi_bitbang.h>
 #include <linux/slab.h>
 
-#include <mach/spi.h>
+#include <linux/platform_data/spi-davinci.h>
 #include <mach/edma.h>
 
 #define SPI_NO_RESOURCE		((resource_size_t)-1)

drivers/usb/host/ohci-da8xx.c

@@ -17,7 +17,7 @@
 #include <linux/clk.h>
 
 #include <mach/da8xx.h>
-#include <mach/usb.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #ifndef CONFIG_ARCH_DAVINCI_DA8XX
 #error "This file is DA8xx bus glue.  Define CONFIG_ARCH_DAVINCI_DA8XX."

drivers/usb/musb/da8xx.c

@@ -35,7 +35,7 @@
 #include <linux/dma-mapping.h>
 
 #include <mach/da8xx.h>
-#include <mach/usb.h>
+#include <linux/platform_data/usb-davinci.h>
 
 #include "musb_core.h"