提交 ebd5a14a 编写于 作者: L Luis R. Rodriguez 提交者: John W. Linville

ath9k_hw: move the RF claim stuff to AR9002 hardware family

Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 57b98384
......@@ -483,6 +483,49 @@ static void ar9002_hw_configpcipowersave(struct ath_hw *ah,
}
}
static int ar9002_hw_get_radiorev(struct ath_hw *ah)
{
u32 val;
int i;
REG_WRITE(ah, AR_PHY(0x36), 0x00007058);
for (i = 0; i < 8; i++)
REG_WRITE(ah, AR_PHY(0x20), 0x00010000);
val = (REG_READ(ah, AR_PHY(256)) >> 24) & 0xff;
val = ((val & 0xf0) >> 4) | ((val & 0x0f) << 4);
return ath9k_hw_reverse_bits(val, 8);
}
int ar9002_hw_rf_claim(struct ath_hw *ah)
{
u32 val;
REG_WRITE(ah, AR_PHY(0), 0x00000007);
val = ar9002_hw_get_radiorev(ah);
switch (val & AR_RADIO_SREV_MAJOR) {
case 0:
val = AR_RAD5133_SREV_MAJOR;
break;
case AR_RAD5133_SREV_MAJOR:
case AR_RAD5122_SREV_MAJOR:
case AR_RAD2133_SREV_MAJOR:
case AR_RAD2122_SREV_MAJOR:
break;
default:
ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
"Radio Chip Rev 0x%02X not supported\n",
val & AR_RADIO_SREV_MAJOR);
return -EOPNOTSUPP;
}
ah->hw_version.analog5GhzRev = val;
return 0;
}
/* Sets up the AR5008/AR9001/AR9002 hardware familiy callbacks */
void ar9002_hw_attach_ops(struct ath_hw *ah)
{
......
......@@ -264,21 +264,6 @@ static void ath9k_hw_read_revisions(struct ath_hw *ah)
}
}
static int ath9k_hw_get_radiorev(struct ath_hw *ah)
{
u32 val;
int i;
REG_WRITE(ah, AR_PHY(0x36), 0x00007058);
for (i = 0; i < 8; i++)
REG_WRITE(ah, AR_PHY(0x20), 0x00010000);
val = (REG_READ(ah, AR_PHY(256)) >> 24) & 0xff;
val = ((val & 0xf0) >> 4) | ((val & 0x0f) << 4);
return ath9k_hw_reverse_bits(val, 8);
}
/************************************/
/* HW Attach, Detach, Init Routines */
/************************************/
......@@ -438,34 +423,6 @@ static void ath9k_hw_init_defaults(struct ath_hw *ah)
ah->power_mode = ATH9K_PM_UNDEFINED;
}
static int ath9k_hw_rf_claim(struct ath_hw *ah)
{
u32 val;
REG_WRITE(ah, AR_PHY(0), 0x00000007);
val = ath9k_hw_get_radiorev(ah);
switch (val & AR_RADIO_SREV_MAJOR) {
case 0:
val = AR_RAD5133_SREV_MAJOR;
break;
case AR_RAD5133_SREV_MAJOR:
case AR_RAD5122_SREV_MAJOR:
case AR_RAD2133_SREV_MAJOR:
case AR_RAD2122_SREV_MAJOR:
break;
default:
ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
"Radio Chip Rev 0x%02X not supported\n",
val & AR_RADIO_SREV_MAJOR);
return -EOPNOTSUPP;
}
ah->hw_version.analog5GhzRev = val;
return 0;
}
static int ath9k_hw_init_macaddr(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
......@@ -496,9 +453,11 @@ static int ath9k_hw_post_init(struct ath_hw *ah)
return -ENODEV;
}
ecode = ath9k_hw_rf_claim(ah);
if (ecode != 0)
return ecode;
if (!AR_SREV_9300_20_OR_LATER(ah)) {
ecode = ar9002_hw_rf_claim(ah);
if (ecode != 0)
return ecode;
}
ecode = ath9k_hw_eeprom_init(ah);
if (ecode != 0)
......
......@@ -844,7 +844,12 @@ void ath9k_hw_htc_resetinit(struct ath_hw *ah);
void ath9k_hw_get_delta_slope_vals(struct ath_hw *ah, u32 coef_scaled,
u32 *coef_mantissa, u32 *coef_exponent);
/*
* Code Specific to AR5008, AR9001 or AR9002,
* we stuff these here to avoid callbacks for AR9003.
*/
void ar9002_hw_cck_chan14_spread(struct ath_hw *ah);
int ar9002_hw_rf_claim(struct ath_hw *ah);
/*
* Code specifric to AR9003, we stuff these here to avoid callbacks
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册