arm64: Sort vendor-specific errata

Sort configuration options for vendor-specific errata by vendor, to
increase uniformity.
Move ARM64_WORKAROUND_REPEAT_TLBI up, as it is also selected by
ARM64_ERRATUM_1286807.
Acked-by: NMark Rutland <mark.rutland@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NWill Deacon <will@kernel.org>

arch/arm64/Kconfig

@@ -553,6 +553,9 @@ config ARM64_ERRATUM_1530923
 
 	  If unsure, say Y.
 
+config ARM64_WORKAROUND_REPEAT_TLBI
+	bool
+
 config ARM64_ERRATUM_1286807
 	bool "Cortex-A76: Modification of the translation table for a virtual address might lead to read-after-read ordering violation"
 	default y
@@ -694,6 +697,35 @@ config CAVIUM_TX2_ERRATUM_219
 
 	  If unsure, say Y.
 
+config FUJITSU_ERRATUM_010001
+	bool "Fujitsu-A64FX erratum E#010001: Undefined fault may occur wrongly"
+	default y
+	help
+	  This option adds a workaround for Fujitsu-A64FX erratum E#010001.
+	  On some variants of the Fujitsu-A64FX cores ver(1.0, 1.1), memory
+	  accesses may cause undefined fault (Data abort, DFSC=0b111111).
+	  This fault occurs under a specific hardware condition when a
+	  load/store instruction performs an address translation using:
+	  case-1  TTBR0_EL1 with TCR_EL1.NFD0 == 1.
+	  case-2  TTBR0_EL2 with TCR_EL2.NFD0 == 1.
+	  case-3  TTBR1_EL1 with TCR_EL1.NFD1 == 1.
+	  case-4  TTBR1_EL2 with TCR_EL2.NFD1 == 1.
+
+	  The workaround is to ensure these bits are clear in TCR_ELx.
+	  The workaround only affects the Fujitsu-A64FX.
+
+	  If unsure, say Y.
+
+config HISILICON_ERRATUM_161600802
+	bool "Hip07 161600802: Erroneous redistributor VLPI base"
+	default y
+	help
+	  The HiSilicon Hip07 SoC uses the wrong redistributor base
+	  when issued ITS commands such as VMOVP and VMAPP, and requires
+	  a 128kB offset to be applied to the target address in this commands.
+
+	  If unsure, say Y.
+
 config QCOM_FALKOR_ERRATUM_1003
 	bool "Falkor E1003: Incorrect translation due to ASID change"
 	default y
@@ -705,9 +737,6 @@ config QCOM_FALKOR_ERRATUM_1003
 	  is unchanged. Work around the erratum by invalidating the walk cache
 	  entries for the trampoline before entering the kernel proper.
 
-config ARM64_WORKAROUND_REPEAT_TLBI
-	bool
-
 config QCOM_FALKOR_ERRATUM_1009
 	bool "Falkor E1009: Prematurely complete a DSB after a TLBI"
 	default y
@@ -729,25 +758,6 @@ config QCOM_QDF2400_ERRATUM_0065
 
 	  If unsure, say Y.
 
-config SOCIONEXT_SYNQUACER_PREITS
-	bool "Socionext Synquacer: Workaround for GICv3 pre-ITS"
-	default y
-	help
-	  Socionext Synquacer SoCs implement a separate h/w block to generate
-	  MSI doorbell writes with non-zero values for the device ID.
-
-	  If unsure, say Y.
-
-config HISILICON_ERRATUM_161600802
-	bool "Hip07 161600802: Erroneous redistributor VLPI base"
-	default y
-	help
-	  The HiSilicon Hip07 SoC uses the wrong redistributor base
-	  when issued ITS commands such as VMOVP and VMAPP, and requires
-	  a 128kB offset to be applied to the target address in this commands.
-
-	  If unsure, say Y.
-
 config QCOM_FALKOR_ERRATUM_E1041
 	bool "Falkor E1041: Speculative instruction fetches might cause errant memory access"
 	default y
@@ -758,22 +768,12 @@ config QCOM_FALKOR_ERRATUM_E1041
 
 	  If unsure, say Y.
 
-config FUJITSU_ERRATUM_010001
-	bool "Fujitsu-A64FX erratum E#010001: Undefined fault may occur wrongly"
+config SOCIONEXT_SYNQUACER_PREITS
+	bool "Socionext Synquacer: Workaround for GICv3 pre-ITS"
 	default y
 	help
-	  This option adds a workaround for Fujitsu-A64FX erratum E#010001.
-	  On some variants of the Fujitsu-A64FX cores ver(1.0, 1.1), memory
-	  accesses may cause undefined fault (Data abort, DFSC=0b111111).
-	  This fault occurs under a specific hardware condition when a
-	  load/store instruction performs an address translation using:
-	  case-1  TTBR0_EL1 with TCR_EL1.NFD0 == 1.
-	  case-2  TTBR0_EL2 with TCR_EL2.NFD0 == 1.
-	  case-3  TTBR1_EL1 with TCR_EL1.NFD1 == 1.
-	  case-4  TTBR1_EL2 with TCR_EL2.NFD1 == 1.
-
-	  The workaround is to ensure these bits are clear in TCR_ELx.
-	  The workaround only affects the Fujitsu-A64FX.
+	  Socionext Synquacer SoCs implement a separate h/w block to generate
+	  MSI doorbell writes with non-zero values for the device ID.
 
 	  If unsure, say Y.