mei: me: d0i3: move mei_me_hw_reset down in the file

Move mei_me_hw_reset down in the source file to avoid
forward declarations when introducing d0i3 flow in the next patch.
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/misc/mei/hw-me.c

@@ -290,57 +290,6 @@ static void mei_me_hw_reset_release(struct mei_device *dev)
 	/* complete this write before we set host ready on another CPU */
 	mmiowb();
 }
-/**
- * mei_me_hw_reset - resets fw via mei csr register.
- *
- * @dev: the device structure
- * @intr_enable: if interrupt should be enabled after reset.
- *
- * Return: always 0
- */
-static int mei_me_hw_reset(struct mei_device *dev, bool intr_enable)
-{
-	u32 hcsr = mei_hcsr_read(dev);
-
-	/* H_RST may be found lit before reset is started,
-	 * for example if preceding reset flow hasn't completed.
-	 * In that case asserting H_RST will be ignored, therefore
-	 * we need to clean H_RST bit to start a successful reset sequence.
-	 */
-	if ((hcsr & H_RST) == H_RST) {
-		dev_warn(dev->dev, "H_RST is set = 0x%08X", hcsr);
-		hcsr &= ~H_RST;
-		mei_hcsr_set(dev, hcsr);
-		hcsr = mei_hcsr_read(dev);
-	}
-
-	hcsr |= H_RST | H_IG | H_CSR_IS_MASK;
-
-	if (intr_enable)
-		hcsr |= H_CSR_IE_MASK;
-	else
-		hcsr &= ~H_CSR_IE_MASK;
-
-	dev->recvd_hw_ready = false;
-	mei_hcsr_write(dev, hcsr);
-
-	/*
-	 * Host reads the H_CSR once to ensure that the
-	 * posted write to H_CSR completes.
-	 */
-	hcsr = mei_hcsr_read(dev);
-
-	if ((hcsr & H_RST) == 0)
-		dev_warn(dev->dev, "H_RST is not set = 0x%08X", hcsr);
-
-	if ((hcsr & H_RDY) == H_RDY)
-		dev_warn(dev->dev, "H_RDY is not cleared 0x%08X", hcsr);
-
-	if (intr_enable == false)
-		mei_me_hw_reset_release(dev);
-
-	return 0;
-}
 
 /**
  * mei_me_host_set_ready - enable device
@@ -1082,6 +1031,58 @@ int mei_me_pg_exit_sync(struct mei_device *dev)
 		return mei_me_pg_legacy_exit_sync(dev);
 }
 
+/**
+ * mei_me_hw_reset - resets fw via mei csr register.
+ *
+ * @dev: the device structure
+ * @intr_enable: if interrupt should be enabled after reset.
+ *
+ * Return: always 0
+ */
+static int mei_me_hw_reset(struct mei_device *dev, bool intr_enable)
+{
+	u32 hcsr = mei_hcsr_read(dev);
+
+	/* H_RST may be found lit before reset is started,
+	 * for example if preceding reset flow hasn't completed.
+	 * In that case asserting H_RST will be ignored, therefore
+	 * we need to clean H_RST bit to start a successful reset sequence.
+	 */
+	if ((hcsr & H_RST) == H_RST) {
+		dev_warn(dev->dev, "H_RST is set = 0x%08X", hcsr);
+		hcsr &= ~H_RST;
+		mei_hcsr_set(dev, hcsr);
+		hcsr = mei_hcsr_read(dev);
+	}
+
+	hcsr |= H_RST | H_IG | H_CSR_IS_MASK;
+
+	if (intr_enable)
+		hcsr |= H_CSR_IE_MASK;
+	else
+		hcsr &= ~H_CSR_IE_MASK;
+
+	dev->recvd_hw_ready = false;
+	mei_hcsr_write(dev, hcsr);
+
+	/*
+	 * Host reads the H_CSR once to ensure that the
+	 * posted write to H_CSR completes.
+	 */
+	hcsr = mei_hcsr_read(dev);
+
+	if ((hcsr & H_RST) == 0)
+		dev_warn(dev->dev, "H_RST is not set = 0x%08X", hcsr);
+
+	if ((hcsr & H_RDY) == H_RDY)
+		dev_warn(dev->dev, "H_RDY is not cleared 0x%08X", hcsr);
+
+	if (intr_enable == false)
+		mei_me_hw_reset_release(dev);
+
+	return 0;
+}
+
 /**
  * mei_me_irq_quick_handler - The ISR of the MEI device
  *