提交 eb5c20de 编写于 作者: A Adrian Hunter 提交者: Ulf Hansson

mmc: sdhci: Fix error paths in sdhci_add_host()

Some error paths in sdhci_add_host() simply returned without
cleaning up.  Also the return value from mmc_add_host()
was not being checked.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
上级 d310ae49
......@@ -2965,7 +2965,8 @@ int sdhci_add_host(struct sdhci_host *host)
if (!host->ops->get_max_clock) {
pr_err("%s: Hardware doesn't specify base clock frequency.\n",
mmc_hostname(mmc));
return -ENODEV;
ret = -ENODEV;
goto undma;
}
host->max_clk = host->ops->get_max_clock(host);
}
......@@ -3015,7 +3016,8 @@ int sdhci_add_host(struct sdhci_host *host)
} else {
pr_err("%s: Hardware doesn't specify timeout clock frequency.\n",
mmc_hostname(mmc));
return -ENODEV;
ret = -ENODEV;
goto undma;
}
}
......@@ -3069,8 +3071,9 @@ int sdhci_add_host(struct sdhci_host *host)
mmc->caps |= MMC_CAP_NEEDS_POLL;
/* If there are external regulators, get them */
if (mmc_regulator_get_supply(mmc) == -EPROBE_DEFER)
return -EPROBE_DEFER;
ret = mmc_regulator_get_supply(mmc);
if (ret == -EPROBE_DEFER)
goto undma;
/* If vqmmc regulator and no 1.8V signalling, then there's no UHS */
if (!IS_ERR(mmc->supply.vqmmc)) {
......@@ -3227,7 +3230,8 @@ int sdhci_add_host(struct sdhci_host *host)
if (mmc->ocr_avail == 0) {
pr_err("%s: Hardware doesn't report any support voltages.\n",
mmc_hostname(mmc));
return -ENODEV;
ret = -ENODEV;
goto unreg;
}
spin_lock_init(&host->lock);
......@@ -3323,13 +3327,15 @@ int sdhci_add_host(struct sdhci_host *host)
if (ret) {
pr_err("%s: Failed to register LED device: %d\n",
mmc_hostname(mmc), ret);
goto reset;
goto unirq;
}
#endif
mmiowb();
mmc_add_host(mmc);
ret = mmc_add_host(mmc);
if (ret)
goto unled;
pr_info("%s: SDHCI controller on %s [%s] using %s\n",
mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)),
......@@ -3341,15 +3347,27 @@ int sdhci_add_host(struct sdhci_host *host)
return 0;
unled:
#ifdef SDHCI_USE_LEDS_CLASS
reset:
led_classdev_unregister(&host->led);
unirq:
#endif
sdhci_do_reset(host, SDHCI_RESET_ALL);
sdhci_writel(host, 0, SDHCI_INT_ENABLE);
sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE);
free_irq(host->irq, host);
#endif
untasklet:
tasklet_kill(&host->finish_tasklet);
unreg:
if (!IS_ERR(mmc->supply.vqmmc))
regulator_disable(mmc->supply.vqmmc);
undma:
if (host->align_buffer)
dma_free_coherent(mmc_dev(mmc), host->align_buffer_sz +
host->adma_table_sz, host->align_buffer,
host->align_addr);
host->adma_table = NULL;
host->align_buffer = NULL;
return ret;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册