xhci: change xhci_test_and_clear_bit() to use new port structure

Don't use pointers to port array and port index as function parameters
in xhci_test_and_clear_bit(), just use a pointer to the right port
structure.

xhci_test_and_clear_bit() was the last port_array user in
xhci_get_port_status() and handle_port_status(), so remove the
port_array from them as well.
Signed-off-by: NMathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/host/xhci-hub.c

@@ -717,16 +717,16 @@ static void xhci_set_remote_wake_mask(struct xhci_hcd *xhci,
 }
 
 /* Test and clear port RWC bit */
-void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array,
-				int port_id, u32 port_bit)
+void xhci_test_and_clear_bit(struct xhci_hcd *xhci, struct xhci_port *port,
+			     u32 port_bit)
 {
 	u32 temp;
 
-	temp = readl(port_array[port_id]);
+	temp = readl(port->addr);
 	if (temp & port_bit) {
 		temp = xhci_port_state_to_neutral(temp);
 		temp |= port_bit;
-		writel(temp, port_array[port_id]);
+		writel(temp, port->addr);
 	}
 }
 
@@ -846,8 +846,7 @@ static u32 xhci_get_ext_port_status(u32 raw_port_status, u32 port_li)
  */
 static u32 xhci_get_port_status(struct usb_hcd *hcd,
 		struct xhci_bus_state *bus_state,
-		__le32 __iomem **port_array,
-		u16 wIndex, u32 raw_port_status,
+	u16 wIndex, u32 raw_port_status,
 		unsigned long flags)
 	__releases(&xhci->lock)
 	__acquires(&xhci->lock)
@@ -930,8 +929,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
 
 			set_bit(wIndex, &bus_state->rexit_ports);
 
-			xhci_test_and_clear_bit(xhci, port_array, wIndex,
-						PORT_PLC);
+			xhci_test_and_clear_bit(xhci, port, PORT_PLC);
 			xhci_set_link_state(xhci, port, XDEV_U0);
 
 			spin_unlock_irqrestore(&xhci->lock, flags);
@@ -1091,8 +1089,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			break;
 		}
 		trace_xhci_get_port_status(wIndex, temp);
-		status = xhci_get_port_status(hcd, bus_state, port_array,
-				wIndex, temp, flags);
+		status = xhci_get_port_status(hcd, bus_state, wIndex, temp,
+					      flags);
 		if (status == 0xffffffff)
 			goto error;
 
@@ -1673,7 +1671,7 @@ int xhci_bus_resume(struct usb_hcd *hcd)
 		for_each_set_bit(port_index, &bus_state->bus_suspended,
 				 BITS_PER_LONG) {
 			/* Clear PLC to poll it later for U0 transition */
-			xhci_test_and_clear_bit(xhci, port_array, port_index,
+			xhci_test_and_clear_bit(xhci, ports[port_index],
 						PORT_PLC);
 			xhci_set_link_state(xhci, ports[port_index], XDEV_U0);
 		}
@@ -1688,7 +1686,7 @@ int xhci_bus_resume(struct usb_hcd *hcd)
 				  port_index);
 			continue;
 		}
-		xhci_test_and_clear_bit(xhci, port_array, port_index, PORT_PLC);
+		xhci_test_and_clear_bit(xhci, ports[port_index], PORT_PLC);
 		slot_id = xhci_find_slot_id_by_port(hcd, xhci, port_index + 1);
 		if (slot_id)
 			xhci_ring_device(xhci, slot_id);

drivers/usb/host/xhci-ring.c

@@ -1527,7 +1527,6 @@ static void handle_port_status(struct xhci_hcd *xhci,
 	int slot_id;
 	unsigned int hcd_portnum;
 	struct xhci_bus_state *bus_state;
-	__le32 __iomem **port_array;
 	bool bogus_port_status = false;
 	struct xhci_port *port;
 
@@ -1555,11 +1554,6 @@ static void handle_port_status(struct xhci_hcd *xhci,
 
 	hcd = port->rhub->hcd;
 	bus_state = &xhci->bus_state[hcd_index(hcd)];
-	if (hcd->speed >= HCD_USB3)
-		port_array = xhci->usb3_ports;
-	else
-		port_array = xhci->usb2_ports;
-
 	hcd_portnum = port->hcd_portnum;
 	portsc = readl(port->addr);
 
@@ -1589,8 +1583,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
 			 * device and host initiated resume.
 			 */
 			bus_state->port_remote_wakeup |= 1 << hcd_portnum;
-			xhci_test_and_clear_bit(xhci, port_array,
-					hcd_portnum, PORT_PLC);
+			xhci_test_and_clear_bit(xhci, port, PORT_PLC);
 			xhci_set_link_state(xhci, port, XDEV_U0);
 			/* Need to wait until the next link state change
 			 * indicates the device is actually in U0.
@@ -1628,8 +1621,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
 			xhci_ring_device(xhci, slot_id);
 		if (bus_state->port_remote_wakeup & (1 << hcd_portnum)) {
 			bus_state->port_remote_wakeup &= ~(1 << hcd_portnum);
-			xhci_test_and_clear_bit(xhci, port_array,
-					hcd_portnum, PORT_PLC);
+			xhci_test_and_clear_bit(xhci, port, PORT_PLC);
 			usb_wakeup_notification(hcd->self.root_hub,
 					hcd_portnum + 1);
 			bogus_port_status = true;
@@ -1651,8 +1643,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
 	}
 
 	if (hcd->speed < HCD_USB3)
-		xhci_test_and_clear_bit(xhci, port_array, hcd_portnum,
-					PORT_PLC);
+		xhci_test_and_clear_bit(xhci, port, PORT_PLC);
 
 cleanup:
 	/* Update event ring dequeue pointer before dropping the lock */

drivers/usb/host/xhci.h

@@ -2104,8 +2104,8 @@ unsigned int count_trbs(u64 addr, u64 len);
 /* xHCI roothub code */
 void xhci_set_link_state(struct xhci_hcd *xhci, struct xhci_port *port,
 				u32 link_state);
-void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array,
-				int port_id, u32 port_bit);
+void xhci_test_and_clear_bit(struct xhci_hcd *xhci, struct xhci_port *port,
+				u32 port_bit);
 int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
 		char *buf, u16 wLength);
 int xhci_hub_status_data(struct usb_hcd *hcd, char *buf);